AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-8794 DRIVE GP-GOV & TRANSFER PUMP PART OF 100-4499, 4P-5502, 6I-4267 GOVERNOR GP-UNIT INJECTOR 3116


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP

TRUCK ENGINE 3116 TRUCK ENGINE 2BK
 3116 Truck Engine 2BK00001-UP SEBP1951 3116 2BK   (1990)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOV & TRANSFER PUMP
4P-5614 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-4665 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
GOVERNOR GP
7E-3263 GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
100-4385 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-4385 GOVERNOR GP-UNIT INJECTOR
 

#SEBP19510560
 

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E-8794 DRIVE GP-GOV & TRANSFER PUMP
PART OF 100-4499, 4P-5502, 6I-4267 GOVERNOR GP-UNIT INJECTOR
i00122334 SEBP1951
7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5612 [1] HOUSING AS-FRONT  
1A. 101-0768 [1] GEAR AS-DRIVE (44-TEETH)  
  8T-0114 [1] PIN-SPRING  
1B. 7S-6798 [1] SEAL-LIP TYPE  
1C. 7S-5005 [2] DOWEL  
1D. 9Y-3107 M [1] BOLT (M8X1.25X45-MM)  
2. [1] SPRING-TORSION  
3. 4P-9490 [1] SHAFT AS-SHUTOFF  
3A. 9X-8902 M [4] BOLT-SOCKET HEAD (M3X0.5X8-MM)  
3B. 4P-9492 [1] BRACKET-SHAFT  
3C. 4P-9493 [1] LEVER-SHUTOFF (SOLENOID)  
3D. 4P-9494 [1] SPRING-SHUTOFF  
3E. 105-0585 [1] LEVER-SHUTOFF (OUTPUT)  
4. 6V-5213 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
5. 7W-5615 [1] SLEEVE AS-PUMP  
  1W-0565 [1] RING-RETAINING  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 4P-4224 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
12. 7E-9898 [1] CONNECTOR  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7E-3943 [1] LEVER-CONTROL  
16. 9Y-9846 M [1] SCREW-LOCATOR  
17. 6L-8598 [2] RING-RETAINING  
18. 4P-3538 [1] SHAFT-THROTTLE  
19. 7E-3944 [1] SLEEVE  
  M   METRIC PART
 

#SEBP19510561
 

7W-4812: FASTENER GP-FUEL INJ PUMP

7W-4812 FASTENER GP-FUEL INJ PUMP
PART OF 100-4514, 100-4515, 101-3193, 105-1705, 106-7903, 4P-1480, 4P-1481, 4P-1482, 4P-1483, 4P-1484, 6I-2391, 6I-3181, 6I-3701 GOVERNOR GP-UNIT INJECTOR
i00122408 SEBP1951
7W4812 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 J [1] SLEEVE  
2. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5218 M [3] BOLT (M8X1.25X35-MM)  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING (FUEL INJECTION PUMP)  
  J   INSTALL SLEEVE IN FRONT HOUSING
  M   METRIC PART
 

#SEBP19510562
 

4P-2917: FILTER & LINES GP-FUEL

4P-2917 FILTER & LINES GP-FUEL
S/N 2BK5895-UP
i00375272 SEBP1951
4P2917 FILTER & LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
2. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  5C-7261 M [2] NUT (M8X1.25-THD)  
3. 6V-9850 [1] ELBOW  
4. 8W-5425 I [1] HOSE AS  
5. 3J-1907 [4] SEAL-O-RING  
6. 3S-2093 [2] STRAP-CABLE  
7. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
  5P-7970 M [2] NUT (M8X1.25-THD)  
8. 6V-8397 [5] SEAL-O-RING  
9. 9M-1974 [7] WASHER-HARD (8.8X16X2-MM THK)  
10. 5P-7813 [1] SEAL-O-RING  
11. 6V-8724 [1] ELBOW  
12. 5F-7054 [1] SEAL-O-RING  
13. 2T-2305 [1] ELBOW  
14. 4P-2910 [1] TUBE AS  
15. 7E-5189 [1] VALVE AS (FUEL)  
16. 6V-8636 [2] CONNECTOR  
17. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
18. 3N-3252 [1] SPRING  
19. 8T-5043 [1] ADAPTER  
  1J-9671 [1] SEAL-O-RING  
20. 8T-0151 [1] ADAPTER  
21. 4P-3513 [1] ADAPTER AS  
22. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
23. 4N-8897 [1] BASE AS-FUEL FILTER  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
24. 6N-4414 [1] COVER-FILTER BASE  
25. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
26. 6V-1820 M [3] BOLT (M10X1.5X30-MM)  
  6V-5839 [3] WASHER (11X21X2.5-MM THK)  
27. 9C-7323 I [1] HOSE AS  
28. 4P-2413 [1] PLATE  
29. 9X-2099 M [2] STUD (M8X1.25X52.75-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP19510563
 

7E-0589: FILTER & LINES GP-FUEL

7E-0589 FILTER & LINES GP-FUEL
S/N 2BK1-14406
RH REAR, FLEXIBLE LINES
FOR USE WITH @@@@@ 4N-3287@@@@@, REMOTE FUEL FILTER BASE
i00397238 SEBP1951
7E0589 FILTER & LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7934 [2] WASHER-HARD (11X21X5-MM THK)  
2. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
3. 6V-8724 C [1] ELBOW  
4. 3J-1907 [4] SEAL-O-RING  
5. 1P-1670 C [1] PLUG-SEAL  
6. 6V-8397 C [5] SEAL-O-RING  
7. 8W-5425 I [1] HOSE AS  
8. 4P-2413 C [1] PLATE  
9. 002-9372 B [2] CLIP  
10. 8T-5043 [1] ADAPTER  
  1J-9671 [1] SEAL-O-RING  
11. 7E-0591 [1] BASE AS-FUEL FILTER  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
12. 5P-4116 C [2] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 7E-5190 C [1] TUBE AS  
14. 5F-7054 [1] SEAL-O-RING  
15. 6V-2317 M [3] BOLT (M8X1.25X30-MM)  
16. 6V-1820 CM [4] BOLT (M10X1.5X30-MM)  
17. 6V-5839 C [5] WASHER (11X21X2.5-MM THK)  
18. 8T-7547 CM [2] BOLT (M8X1.25X30-MM)  
19. 7E-5189 C [1] VALVE AS (FUEL)  
20. 8T-0151 C [1] ADAPTER  
21. 7C-9323 C [1] MANIFOLD-EXHAUST  
22. 2T-2305 [1] ELBOW  
23. 1P-0436 B [1] GASKET (FUEL PRIMING PUMP)  
24. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 6N-4414 B [1] COVER-FILTER BASE  
26. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
27. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
28. 5P-7970 M [1] NUT (M8X1.25-THD)  
29. 5P-7813 C [1] SEAL-O-RING  
30. 3N-3252 C [1] SPRING  
31. 6V-9850 C [1] ELBOW  
32. 3S-2093 CB [2] STRAP-CABLE  
33. 2Y-5829 CM [1] NUT (M10X1.5-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP19510564
 

7E-0589: FILTER & LINES GP-FUEL

7E-0589 FILTER & LINES GP-FUEL
S/N 2BK14407-UP
RH REAR, FLEXIBLE LINES
FOR USE WITH @@@@@ 4N-3287@@@@@, REMOTE FUEL FILTER BASE
ALSO AN ATTACHMENT
i00397243 SEBP1951
7E0589 FILTER & LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
2. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
3. 6V-8724 C [1] ELBOW  
4. 3J-1907 [4] SEAL-O-RING  
5. 1P-1670 C [1] PLUG-SEAL  
6. 6V-8397 C [5] SEAL-O-RING  
7. 8W-5425 I [1] HOSE AS  
8. 4P-2413 C [1] PLATE  
9. 002-9372 B [2] CLIP  
10. 8T-5043 [1] ADAPTER  
  1J-9671 [1] SEAL-O-RING  
11. 4N-8897 [1] BASE AS-FUEL FILTER  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
12. 7X-7729 C [2] WASHER (11X25X3-MM THK)  
13. 7E-5190 C [1] TUBE AS  
14. 5F-7054 [1] SEAL-O-RING  
15. 6V-2317 M [4] BOLT (M8X1.25X30-MM)  
16. 6V-1820 CM [3] BOLT (M10X1.5X30-MM)  
17. 6V-5839 C [3] WASHER (11X21X2.5-MM THK)  
18. 8T-4137 CM [2] BOLT (M10X1.5X20-MM)  
19. 7E-5189 C [1] VALVE AS (FUEL)  
20. 8T-0151 C [1] ADAPTER  
21. 9C-7323 I [1] HOSE AS  
22. 2T-2305 [1] ELBOW  
23. 1P-0436 B [1] GASKET (FUEL PRIMING PUMP)  
24. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 6N-4414 B [1] COVER-FILTER BASE  
26. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
27. 9M-1974 [5] WASHER-HARD (8.8X16X2-MM THK)  
28. 5P-7970 M [2] NUT (M8X1.25-THD)  
29. 5P-7813 C [1] SEAL-O-RING  
30. 3N-3252 C [1] SPRING  
31. 6V-9850 C [1] ELBOW  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP19510565
 

1N-3476: FILTER GP-FUEL

1N-3476 FILTER GP-FUEL
i00121944 SEBP1951
1N3476 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 B [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 6V-9607 BM [2] BOLT (M8X1.25X120-MM)  
3. 4W-5158 [1] BASE AS  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
4. 7C-1159 [1] GASKET  
5. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
6. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
7. 244-3712 [1] PLUG AS  
7A. 214-7568 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP19510566
 

5R-9001: FILTER GP-FUEL

5R-9001 FILTER GP-FUEL
S/N 2BK29536-UP
i00391678 SEBP1951
5R9001 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 6V-9607 M [2] BOLT (M8X1.25X120-MM)  
3. 3J-1907 [1] SEAL-O-RING  
4. 7C-1159 [1] GASKET  
5. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
6. 7E-9763 [1] FILTER-FUEL  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
8. 4W-5158 [1] BASE AS  
9. 4N-3294 [1] INSERT-FUEL FILTER  
  M   METRIC PART
 

#SEBP19510567
 

7E-3263: GOVERNOR GP

7E-3263 GOVERNOR GP
PART OF 4P-1810, 4P-1820, 4P-1830, 4P-1840, 4P-1850 GOVERNOR GP-UNIT INJECTOR
i00402067 SEBP1951
7E3263 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 7C-8974 [1] CLEVIS AS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 7E-5785 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 7E-3215 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 7C-6592 [1] ARBOR AS-TORQUE CAM  
24. 8C-6775 M [1] SETSCREW-SOCKET  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5744 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 8T-8895 M [1] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 7E-3214 [1] HOUSING AS  
40. Z [1] SHAFT  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 5C-2874 M [3] NUT (M5X0.8-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 9X-6002 M [1] SETSCREW  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 7C-6250 [1] COVER AS  
54. Z [1] PLUG  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-7842 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT (M4X0.7-THD)  
83. 5M-2057 [1] SEAL-O-RING  
84. 4P-3537 [1] RING-TOLERANCE  
85. 4P-3539 [1] LEVER-THROTTLE  
86. 4P-2131 [1] INSERT  
87. 6H-9691 [1] SEAL-O-RING  
88. 7E-7952 [1] SPRING-FLAT  
89. 8C-6365 M [1] BOLT-SOCKET HEAD (M3X0.5X6-MM)  
90. 9T-0823 [2] WASHER (3.3X7.4X1-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP19510568
 

100-4385: GOVERNOR GP-UNIT INJECTOR

100-4385 GOVERNOR GP-UNIT INJECTOR
S/N 2BK23780-UP
PART OF 6I-3701 GOVERNOR GP-UNIT INJECTOR
Type 1
i00460223 SEBP1951
1004385 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4499 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 100-6808 [1] CAM-TORQUE  
3. 4P-8745 [1] SPRING GP  
4. 7C-0989 [1] PLUG-ORIFICE  
5. 4P-5745 [1] CONTROL AS-FUEL RATIO  
  7C-5599 [1] WASHER  
  7W-0802 [1] DIAPHRAGM  
  7W-1691 [1] WASHER (19.15X35X3-MM THK)  
  8T-5447 [1] RING-RETAINING  
6. 7C-4466 [1] SPRING-DASHPOT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19510569
 

100-4385: GOVERNOR GP-UNIT INJECTOR

100-4385 GOVERNOR GP-UNIT INJECTOR
S/N 2BK23780-UP
PART OF 6I-3701 GOVERNOR GP-UNIT INJECTOR
Type 2
i00460224 SEBP1951
1004385 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4499 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 100-6808 [1] CAM-TORQUE  
3. 7E-3829 [1] SPRING GP-GOVERNOR  
4. 7C-0989 [1] PLUG-ORIFICE  
5. 4P-5745 [1] CONTROL AS-FUEL RATIO  
6. 7C-4466 [1] SPRING-DASHPOT  
7. 4P-5605 B [4] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
4P6493 Governor Information Plate Available
1992/06/01
Governor Specifications Are Available Through The Technical Information System
1992/09/01
Replacement Governors For Early Engines
1992/11/01
Measuring "Dynamic Rack" Of Unit Injectors
1993/06/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Service Tool Calibration Pins For Mechanical Goverened Engines{1264,1265}
1996/07/30
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines{1264,1265}
1996/07/30
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/30
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/30
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/30
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Operation and Maintenance Manual
Fuel Inlet Screen - Clean/Inspect/Replace
3116 Truck Engine
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Governor
3116 Truck Engines
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Information Release Memo
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Governor - Adjust
3116 Truck Engine
Troubleshooting
Governor Instability
3114, 3116 and 3126 Engines
Disassembly and Assembly
Governor - Install
3116 On Highway Engines
Governor - Remove
3116 On Highway Engines
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Measuring "Dynamic Rack" Of Unit Injectors{0780}
1993/06/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17

Caterpillar Parts SIS Catalog 3116 :

DRIVE GP-GOV & TRANSFER PUMP
7E-4665 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
4P-5614 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
7E-9429 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
6I-3334 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
6I-0424 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4P-8485 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4P-2986 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4P-2985 CONTROL GP-GOVERNOR
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
FILTER & LINES GP-FUEL
4P-2917 FILTER & LINES GP-FUEL
FILTER & LINES GP-FUEL
7E-0589 FILTER & LINES GP-FUEL
FILTER & LINES GP-FUEL
7E-0589 FILTER & LINES GP-FUEL
FILTER GP-FUEL
1N-3476 FILTER GP-FUEL
FILTER GP-FUEL
5R-9001 FILTER GP-FUEL
GOVERNOR GP
7E-3263 GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
100-4385 GOVERNOR GP-UNIT INJECTOR

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.