AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-7608 DRIVE GP-GOVERNOR & FUEL PUMP S/N 01Z28816-31255 3208 MARINE ENGINE


FUEL SYSTEM
GOVERNOR GP
DRIVE GP-TACHOMETER
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
LINES GP-FUEL INJECTION

MARINE ENGINE 3208 MARINE ENGINE 01Z
 3208 Marine Engine 01Z21747-UP SEBP1955 3208 01Z   (1980)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOVERNOR & FUEL PUMP
183-7629 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
9Y-7608 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
9Y-7608 DRIVE GP-GOVERNOR & FUEL PUMP
PUMP GP-GOV & FUEL INJ
185-6639 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
185-6640 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-1664 PUMP GP-GOV & FUEL INJ
 

#SEBP19550270
 

9Y-7608: DRIVE GP-GOVERNOR & FUEL PUMP

9Y-7608 DRIVE GP-GOVERNOR & FUEL PUMP
S/N 01Z28816-31255
i00446526 SEBP1955
9Y7608 DRIVE GP-GOVERNOR & FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2888 [1] GEAR-FUEL PUMP (55-TEETH)(55 TEETH)  
2. 9N-5022 [1] WASHER-HARD  
3. 9N-1856 [1] SHAFT AS-TACHOMETER DRIVE  
4. 9L-9236 [1] SLEEVE-TACH DRIVE  
5. 119-3661 C [1] GEAR & WEIGHT AS (55 TEETH)  
6. 122-7367 C [1] WASHER  
7. 3J-4538 [1] SCREW  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19550271
 

7W-5993: DRIVE GP-TACHOMETER

7W-5993 DRIVE GP-TACHOMETER
S/N 01Z21747-99999
AN ATTACHMENT
i00413845 SEBP1955
7W5993 DRIVE GP-TACHOMETER Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-1856 [1] SHAFT AS-TACHOMETER DRIVE  
2. 9L-9236 [1] SLEEVE-TACH DRIVE  
3. 9L-7842 [1] ADAPTER-TACHOMETER DRIVE  
4. 7M-7644 [1] CAP-PROTECTION  
5. 5P-0547 [1] SEAL-LIP TYPE  
6. 8M-5661 [1] SEAL-O-RING  
 

#SEBP19550272
 

9L-6925: FASTENER GP-FUEL INJ PUMP

9L-6925 FASTENER GP-FUEL INJ PUMP
i00435468 SEBP1955
9L6925 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-9729 [1] SEAL-O-RING  
2. 7F-5634 [1] BOLT-SPECIAL  
3. 125-1414 [2] SPACER (8.3X17.5X12.8-MM THK)  
4. 1A-9579 [1] BOLT (5/16-18X1.5-IN)  
 

#SEBP19550273
 

6N-3178: FILTER GP-FUEL

6N-3178 FILTER GP-FUEL
i00407448 SEBP1955
6N3178 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-7392 [1] BASE AS-FILTER  
2. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
3. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
4. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
5. 5M-6213 [1] PLUG-PIPE  
6. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP19550274
 

144-4499: LINES GP-FUEL FILTER

144-4499 LINES GP-FUEL FILTER
S/N 01Z33670-99999
i01242607 SEBP1955
1444499 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8K-0968 [2] ELBOW  
2. 7C-9292 I [1] HOSE AS  
4. 6N-2784 [1] JUNCTION BLOCK  
5. 2N-1287 [1] ELBOW-FLARED  
6. 144-4507 [1] TUBE AS  
7. 3N-1294 [1] ELBOW  
8. 1J-9671 [3] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP19550275
 

7C-9384: LINES GP-FUEL FILTER

7C-9384 LINES GP-FUEL FILTER
i00394121 SEBP1955
7C9384 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-4727 [1] TUBE AS  
2. 7C-9292 I [1] HOSE AS  
3. 6N-2784 [1] JUNCTION BLOCK  
4. 8K-0968 [2] ELBOW  
5. 1J-9671 [2] SEAL-O-RING  
6. 2N-1287 [1] ELBOW-FLARED  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP19550276
 

101-0957: LINES GP-FUEL INJECTION

101-0957 LINES GP-FUEL INJECTION
S/N 01Z25373-99999
i00462608 SEBP1955
1010957 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-0298 Y [1] LINES GP-FUEL INJECTION  
2. 9Y-0299 Y [1] LINES GP-FUEL INJECTION  
3. 9L-7675 [8] ADAPTER AS-LINE  
    (EACH INCLUDES)
4. 6F-4855 [1] SEAL-O-RING  
5. 115-3354 [8] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
  1H-1023 [2] SEAL-O-RING  
  101-1918 [2] WASHER  
6. 9L-9098 [1] SEAL-CARBON STOP  
7. 1W-2459 [8] CLAMP AS  
8. 101-1917 [8] SPACER  
9. 9L-9372 [4] LOCK-ADAPTER  
10. 9N-2050 [1] BRACKET  
  9L-8716 [1] CLAMP  
11. 5P-4939 [1] SCREW-MACHINE (10-24X15.88-IN)  
12. 9L-9251 [1] CLIP  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
13. 9N-2064 [1] TUBE AS  
  7K-8332 [1] INSERT-TUBE SUPPORT  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19550277
 

183-7633: LINES GP-FUEL INJECTION

183-7633 LINES GP-FUEL INJECTION
S/N 01Z33691-99999
i01254678 SEBP1955
1837633 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2459 [8] CLAMP AS  
2. 4W-1819 [8] NOZZLE AS  
    (EACH INCLUDES)
  1H-1023 [2] SEAL-O-RING  
  9L-9098 [1] SEAL-CARBON STOP  
  9N-3738 [1] WASHER  
3. 9L-9372 [4] LOCK-ADAPTER  
4. 9Y-0299 Y [1] LINES GP-FUEL INJECTION  
5. 9N-3879 [8] SPACER  
6. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
7. 9L-9251 [1] CLIP  
8. 9N-2064 [1] TUBE AS  
  7K-8332 [1] INSERT-TUBE SUPPORT  
9. 9N-2050 [1] BRACKET  
10. 9L-8716 [1] CLAMP  
11. 5P-4939 [1] SCREW-MACHINE (10-24X15.88-IN)  
12. 9Y-0298 Y [1] LINES GP-FUEL INJECTION  
13. 9L-7675 [8] ADAPTER AS-LINE  
    (EACH INCLUDES)
14. 117-1385 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19550278
 

185-7188: LINES GP-FUEL INJECTION

185-7188 LINES GP-FUEL INJECTION
S/N 01Z33670-99999
i01243196 SEBP1955
1857188 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-1917 [8] SPACER  
2. 1W-2459 [8] CLAMP AS  
3. 115-3354 [8] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
  1H-1023 [2] SEAL-O-RING  
  9L-9098 [1] SEAL-CARBON STOP  
3A. 101-1918 [1] WASHER  
4. 9L-9372 [4] LOCK-ADAPTER  
5. 9Y-0299 Y [1] LINES GP-FUEL INJECTION  
7. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
8. 9L-9251 [1] CLIP  
9. 125-9623 [1] TUBE AS  
10. 9N-2050 [1] BRACKET  
11. 9L-8716 [1] CLAMP  
12. 5P-4939 [1] SCREW-MACHINE (10-24X15.88-IN)  
13. 9Y-0298 Y [1] LINES GP-FUEL INJECTION  
14. 9L-7675 [8] ADAPTER AS-LINE  
    (EACH INCLUDES)
  117-1385 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19550279
 

4W-1820: LINES GP-FUEL INJECTION

4W-1820 LINES GP-FUEL INJECTION
S/N 01Z21747-99999
i00378259 SEBP1955
4W1820 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-0298 CY [1] LINES GP-FUEL INJECTION  
2. 9Y-0299 CY [1] LINES GP-FUEL INJECTION  
3. 9L-7675 [8] ADAPTER AS-LINE  
    (EACH INCLUDES)
4. 6F-4855 [1] SEAL-O-RING  
5. 4W-8483 [8] NOZZLE AS  
6. 9N-2064 [1] TUBE AS  
  7K-8332 [1] INSERT-TUBE SUPPORT  
7. 1W-2459 [8] CLAMP AS  
8. 9N-3879 [8] SPACER  
9. 9L-9372 [4] LOCK-ADAPTER  
10. 9N-2050 [1] BRACKET  
  9L-8716 C [1] CLAMP  
11. 5P-4939 [1] SCREW-MACHINE (10-24X15.88-IN)  
12. 9L-9251 [1] CLIP  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/17
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Fuel Injection Timing Changed To 15° With New 3.5° Timing Advance
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Gear And Weight Assembly Used In Governor And Fuel Pump Drive Group {1272}
1995/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Converting 3208TA Pleasure Craft Marine Engines From 355BHP To 375BHP{1050, 1251, 1350, 1379}
Converting 3208TA Pleasure Craft Marine Engines From 355BHP To 375BHP{1050, 1251, 1350, 1379}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Installation Of 9G8187 Cold Start Relay{1289}
Installation Of 9G8187 Cold Start Relay{1289}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Pump
3208 MARINE ENGINE
Governor
3208 MARINE ENGINE
Fuel Transfer Pump
3208 MARINE ENGINE
Automatic Timing Advance Unit
3208 MARINE ENGINE
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing & Governor
3208 MARINE ENGINE
Check Valve & Bypass Valve
3208 MARINE ENGINE
Fuel Injection Pumps
3208 MARINE ENGINE
Fuel Transfer Pump
3208 MARINE ENGINE
Fuel Injection Pump Housing
3208 MARINE ENGINE
Governor
3208 MARINE ENGINE
Automatic Timing Advance
3208 MARINE ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Use Calibration Tools To Set, Test, And Adjust Heavy Sleeve Metering Fuel System {1250,1251}
1998/03/30

Caterpillar Parts SIS Catalog 3208 :

DRIVE GP-GOVERNOR & FUEL PUMP
9Y-7608 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
183-7629 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
121-4699 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR
7C-1641 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
7C-1641 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
7C-1641 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
7C-0203 DRIVE GP-GOVERNOR
CONTROL GP-GOVERNOR
9L-6743 CONTROL GP-GOVERNOR
DRIVE GP-TACHOMETER
7W-5993 DRIVE GP-TACHOMETER
FASTENER GP-FUEL INJ PUMP
9L-6925 FASTENER GP-FUEL INJ PUMP
FILTER GP-FUEL
6N-3178 FILTER GP-FUEL
LINES GP-FUEL FILTER
144-4499 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
7C-9384 LINES GP-FUEL FILTER
LINES GP-FUEL INJECTION
101-0957 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
183-7633 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
185-7188 LINES GP-FUEL INJECTION

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.