MARINE TRANSMISSION
TRANSMISSION GP-MARINEMARINE TRANSMISSION
TRANSMISSION GP-MARINE
#SEBP19550440
7E-1134: TRANSMISSION GP-MARINE
7E-1134 TRANSMISSION GP-MARINE
S/N 01Z21747-99999
2.54:1 RATIO
CANNOT BE USED WITH FORWARD MOUNTED STARTER
AN ATTACHMENT
S/N 01Z21747-99999
2.54:1 RATIO
CANNOT BE USED WITH FORWARD MOUNTED STARTER
AN ATTACHMENT
For full view, you need register
Parts for your 3208 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-6160 J | [1] | HOUSING AS | |
| 2. | 6V-1820 M | [2] | BOLT (M10X1.5X30-MM) | |
| 3. | 3L-7620 | [1] | PLATE-IDENTIFICATION (ROTATION INDICATION)(MARINE TRANSMISSION) | |
| 4. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 5. | 1T-0477 | [2] | DOWEL | |
| 6. | 6V-4248 M | [5] | BOLT (M10X1.5X25-MM) | |
| 7. | 3T-3396 | [1] | EYEBOLT | |
| 8. | 2N-8875 Y | [1] | VALVE AS-SELECTOR (MARINE GEAR) | |
| 9. | 9Y-5811 | [1] | TUBE AS | |
| 10. | 9Y-5812 | [1] | GAUGE-OIL LEVEL (DIPSTICK) (MARINE TRANSMISSION) | |
| 11. | 9F-2247 | [1] | PLUG-PIPE | |
| 12. | 6V-2316 M | [1] | BOLT (M8X1.25X12-MM) | |
| 13. | 9N-0869 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 14. | 3S-9233 | [1] | SEAL-O-RING | |
| 15. | 3T-2383 | [1] | COVER-STRAINER | |
| 16. | 3B-7721 J | [1] | BUSHING-REDUCER | |
| 17. | 6V-4249 M | [1] | BOLT (M10X1.5X50-MM) | |
| 18. | 7L-2227 J | [1] | BREATHER (MARINE GEAR) | |
| 19. | 6V-1820 M | [15] | BOLT (M10X1.5X30-MM) | |
| 20. | 6S-6031 | [1] | CUP-BEARING | |
| 6S-6032 | [1] | CONE-BEARING | ||
| 21. | 3T-2433 | [2] | TUBE-CONNECTOR | |
| 22. | 2D-9190 | [1] | CUP-BEARING | |
| 1T-1580 | [1] | CONE-BEARING | ||
| 23. | 3T-2402 | [1] | PUMP-OIL | |
| 24. | 6V-3821 M | [4] | BOLT (M8X1.25X110-MM) | |
| 25. | 6L-9736 | [2] | RING-PISTON | |
| 26. | 2N-8870 | [1] | GASKET-PUMP MOUNTING | |
| 27. | 3T-2391 | [1] | MOUNT | |
| 28. | 7E-5045 | [1] | PINION AS (27 TEETH) | |
| 29. | 3T-2416 B | [2] | SHIM (0.13-MM THK) | |
| 3T-2417 B | [2] | SHIM (0.18-MM THK) | ||
| 3T-2418 B | [2] | SHIM (.50MM THK) | ||
| 30. | 3T-2396 | [1] | PISTON-CLUTCH | |
| 31. | 3T-2397 | [7] | PLATE (EXTERNAL TEETH) | |
| 32. | 3T-2398 | [6] | PLATE (INTERNAL TEETH) | |
| 33. | 3T-2399 | [1] | PLATE-CLUTCH | |
| 34. | 4F-8824 | [1] | SEAL-O-RING | |
| 35. | 7T-8746 | [1] | RING-LATHE CUT | |
| 36. | 8B-7789 | [1] | RING-SNAP | |
| 37. | 3T-2427 | [1] | SPRING | |
| 38. | 3T-2405 | [1] | RING-SNAP | |
| 39. | 3T-2403 | [1] | RETAINER-SPRING | |
| 40. | 6V-4355 | [1] | RACE-THRUST BEARING | |
| 41. | 1T-1581 | [2] | BEARING-THRUST | |
| 42. | 1T-1582 | [1] | RACE-THRUST BEARING | |
| 43. | 1T-1583 | [2] | RACE-THRUST BEARING | |
| 44. | 7E-1137 | [1] | SHAFT AS (57-TEETH) | |
| 45. | 2D-6642 | [2] | BALL | |
| 9F-8125 | [1] | LOCKWASHER | ||
| 46. | 6F-7002 | [1] | PIN | |
| 47. | 3N-2321 | [1] | SCREEN AS-FILTER (MARINE TRANSMISSION) | |
| 48. | 8F-0208 | [1] | GROMMET | |
| 49. | 3T-2432 J | [1] | TUBE-SUCTION | |
| 50. | 8L-2779 | [4] | SEAL-O-RING | |
| 51. | 3T-2404 | [1] | RETAINER-BEARING | |
| 52. | 3T-2419 B | [3] | SHIM (.13MM THK) | |
| 3T-2420 B | [3] | SHIM (.18MM THK) | ||
| 3T-2421 B | [3] | SHIM (.50MM THK) | ||
| 53. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 54. | 3T-2412 J | [1] | SHIELD-RETAINER | |
| 55. | 5K-2595 | [1] | SEAL-LIP TYPE | |
| 56. | 7E-1136 | [1] | SHAFT-INPUT (54-TEETH) | |
| 57. | 6V-9506 | [1] | SEAL-LIP TYPE | |
| 58. | 5P-9652 | [1] | CUP-BEARING | |
| 5P-9651 | [1] | CONE-BEARING | ||
| 59. | 6V-3822 M | [8] | BOLT (M10X1.5X35-MM) | |
| 60. | 3T-2428 | [1] | SUPPORT-BEARING | |
| 61. | 3T-2413 B | [3] | SHIM (.13MM THK) | |
| 3T-2414 B | [3] | SHIM (.18MM THK) | ||
| 3T-2415 B | [3] | SHIM (.51MM THK) | ||
| 62. | 6V-4248 M | [16] | BOLT (M10X1.5X25-MM) | |
| 63. | 3T-2382 | [1] | ADAPTER | |
| 64. | 6S-6031 | [1] | CUP-BEARING | |
| 6S-6032 | [1] | CONE-BEARING | ||
| 65. | 3T-2410 J | [1] | SHIELD-OIL | |
| 66. | 1T-1585 | [1] | CUP-BEARING | |
| 1T-1584 | [1] | CONE-BEARING | ||
| 67. | 7T-6163 J | [1] | SHIELD-RETAINER | |
| 68. | 2H-4337 J | [5] | SCREW-DRIVE (NO 10X0.5-IN) | |
| 69. | 7E-5046 | [1] | GEAR-OUTPUT (65 TEETH) | |
| 70. | 7L-2224 | [1] | SEAL-O-RING | |
| 71. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 72. | 2A-4576 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 6V-0957 | [1] | CONE-BEARING | ||
| 73. | 3T-2385 | [1] | FLANGE-OUTPUT | |
| 74. | 7L-2188 | [1] | SEAL-RUBBER | |
| 75. | 3T-2434 | [1] | WASHER-RETAINING | |
| 76. | 1D-4627 | [1] | BOLT (7/8-9X3-IN) | |
| 77. | 3T-2409 | [1] | SHAFT-OUTPUT (24 TEETH) | |
| 78. | 5N-5262 B | [2] | SHIM (.127MM THK) | |
| 5N-5264 B | [2] | SHIM (.508MM THK) | ||
| 79. | 3T-2384 J | [1] | DIVIDER-OIL | |
| 80. | 6S-6031 | [1] | CUP-BEARING | |
| 6S-6032 | [1] | CONE-BEARING | ||
| 81. | 3T-2427 | [1] | SPRING | |
| 82. | 7T-8746 | [1] | RING-LATHE CUT | |
| 83. | 3T-2400 J | [1] | PLATE | |
| 4B-4158 J | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 84. | 4F-8824 | [1] | SEAL-O-RING | |
| 85. | 3T-2399 | [1] | PLATE-CLUTCH | |
| 86. | 3T-2397 | [7] | PLATE (EXTERNAL TEETH) | |
| 3T-2398 | [6] | PLATE (INTERNAL TEETH) | ||
| 87. | 8B-7789 | [1] | RING-SNAP | |
| 88. | 3T-2405 | [1] | RING-SNAP | |
| 89. | 6V-4355 | [1] | RACE-THRUST BEARING | |
| 90. | 1T-1583 | [2] | RACE-THRUST BEARING | |
| 91. | 3T-2403 | [1] | RETAINER-SPRING | |
| 92. | 1T-1581 | [2] | BEARING-THRUST | |
| 93. | 1T-1582 | [1] | RACE-THRUST BEARING | |
| 94. | 3D-9126 | [1] | CUP | |
| 3D-9125 | [1] | CONE-BEARING | ||
| 95. | 3T-2425 | [1] | SPACER-BEARING | |
| 96. | 3T-2422 B | [3] | SHIM (0.13-MM THK) | |
| 3T-2423 B | [3] | SHIM (0.18-MM THK) | ||
| 3T-2424 B | [3] | SHIM (0.5-MM THK) | ||
| 97. | 6L-9736 | [2] | RING-PISTON | |
| 98. | 7E-1138 | [1] | SHAFT AS (57-TEETH) | |
| 99. | 2D-6642 | [2] | BALL | |
| 9F-8125 | [1] | LOCKWASHER | ||
| 100. | 6F-7002 | [1] | PIN | |
| 101. | 7E-5045 | [1] | PINION AS (27 TEETH) | |
| 102. | 3T-2396 | [1] | PISTON-CLUTCH | |
| 103. | 9Y-5810 J | [1] | CLOSURE | |
| B | USE AS REQUIRED | |||
| J | HOUSING AS MARKED J INCLUDES PARTS MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP19550441
7E-1135: TRANSMISSION GP-MARINE
7E-1135 TRANSMISSION GP-MARINE
S/N 01Z21747-99999
2.99:1 RATIO
CANNOT BE USED WITH FORWARD MOUNTED STARTER
AN ATTACHMENT
S/N 01Z21747-99999
2.99:1 RATIO
CANNOT BE USED WITH FORWARD MOUNTED STARTER
AN ATTACHMENT
For full view, you need register
Parts for your 3208 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-6160 J | [1] | HOUSING AS | |
| 2. | 6V-1820 M | [2] | BOLT (M10X1.5X30-MM) | |
| 3. | 3L-7620 | [1] | PLATE-IDENTIFICATION (ROTATION INDICATION)(MARINE TRANSMISSION) | |
| 4. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 5. | 1T-0477 | [2] | DOWEL | |
| 6. | 6V-4248 M | [5] | BOLT (M10X1.5X25-MM) | |
| 7. | 3T-3396 | [1] | EYEBOLT | |
| 8. | 2N-8875 Y | [1] | VALVE AS-SELECTOR (MARINE GEAR) | |
| 9. | 9Y-5811 | [1] | TUBE AS | |
| 10. | 9Y-5812 | [1] | GAUGE-OIL LEVEL (DIPSTICK) (MARINE TRANSMISSION) | |
| 11. | 9F-2247 | [1] | PLUG-PIPE | |
| 12. | 6V-2316 M | [1] | BOLT (M8X1.25X12-MM) | |
| 13. | 9N-0869 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 14. | 3S-9233 | [1] | SEAL-O-RING | |
| 15. | 3T-2383 | [1] | COVER-STRAINER | |
| 16. | 3B-7721 J | [1] | BUSHING-REDUCER | |
| 17. | 6V-4249 M | [1] | BOLT (M10X1.5X50-MM) | |
| 18. | 7L-2227 J | [1] | BREATHER (MARINE GEAR) | |
| 19. | 6V-1820 M | [15] | BOLT (M10X1.5X30-MM) | |
| 20. | 6S-6031 | [1] | CUP-BEARING | |
| 6S-6032 | [1] | CONE-BEARING | ||
| 21. | 3T-2433 | [2] | TUBE-CONNECTOR | |
| 22. | 2D-9190 | [1] | CUP-BEARING | |
| 1T-1580 | [1] | CONE-BEARING | ||
| 23. | 3T-2402 | [1] | PUMP-OIL | |
| 24. | 6V-3821 M | [4] | BOLT (M8X1.25X110-MM) | |
| 25. | 6L-9736 | [2] | RING-PISTON | |
| 26. | 2N-8870 | [1] | GASKET-PUMP MOUNTING | |
| 27. | 3T-2391 | [1] | MOUNT | |
| 28. | 7T-1444 | [1] | PINION AS | |
| 29. | 3T-2416 B | [2] | SHIM (0.13-MM THK) | |
| 3T-2417 B | [2] | SHIM (0.18-MM THK) | ||
| 3T-2418 B | [2] | SHIM (.50MM THK) | ||
| 30. | 3T-2396 | [1] | PISTON-CLUTCH | |
| 31. | 3T-2397 | [7] | PLATE (EXTERNAL TEETH) | |
| 32. | 3T-2398 | [6] | PLATE (INTERNAL TEETH) | |
| 33. | 3T-2399 | [1] | PLATE-CLUTCH | |
| 34. | 4F-8824 | [1] | SEAL-O-RING | |
| 35. | 7T-8746 | [1] | RING-LATHE CUT | |
| 36. | 8B-7789 | [1] | RING-SNAP | |
| 37. | 3T-2427 | [1] | SPRING | |
| 38. | 3T-2405 | [1] | RING-SNAP | |
| 39. | 3T-2403 | [1] | RETAINER-SPRING | |
| 40. | 6V-4355 | [1] | RACE-THRUST BEARING | |
| 41. | 1T-1581 | [2] | BEARING-THRUST | |
| 42. | 1T-1582 | [1] | RACE-THRUST BEARING | |
| 43. | 1T-1583 | [2] | RACE-THRUST BEARING | |
| 44. | 7E-1137 | [1] | SHAFT AS (57-TEETH) | |
| 45. | 2D-6642 | [2] | BALL | |
| 9F-8125 | [1] | LOCKWASHER | ||
| 46. | 6F-7002 | [1] | PIN | |
| 47. | 3N-2321 | [1] | SCREEN AS-FILTER (MARINE TRANSMISSION) | |
| 48. | 8F-0208 | [1] | GROMMET | |
| 49. | 3T-2432 J | [1] | TUBE-SUCTION | |
| 50. | 8L-2779 | [4] | SEAL-O-RING | |
| 51. | 3T-2404 | [1] | RETAINER-BEARING | |
| 52. | 3T-2419 B | [3] | SHIM (.13MM THK) | |
| 3T-2420 B | [3] | SHIM (.18MM THK) | ||
| 3T-2421 B | [3] | SHIM (.50MM THK) | ||
| 53. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 54. | 3T-2412 J | [1] | SHIELD-RETAINER | |
| 55. | 5K-2595 | [1] | SEAL-LIP TYPE | |
| 56. | 7E-1136 | [1] | SHAFT-INPUT (54-TEETH) | |
| 57. | 6V-9506 | [1] | SEAL-LIP TYPE | |
| 58. | 5P-9652 | [1] | CUP-BEARING | |
| 5P-9651 | [1] | CONE-BEARING | ||
| 59. | 6V-3822 M | [8] | BOLT (M10X1.5X35-MM) | |
| 60. | 3T-2428 | [1] | SUPPORT-BEARING | |
| 61. | 3T-2413 B | [3] | SHIM (.13MM THK) | |
| 3T-2414 B | [3] | SHIM (.18MM THK) | ||
| 3T-2415 B | [3] | SHIM (.51MM THK) | ||
| 62. | 6V-4248 M | [16] | BOLT (M10X1.5X25-MM) | |
| 63. | 3T-2382 | [1] | ADAPTER | |
| 64. | 6S-6031 | [1] | CUP-BEARING | |
| 6S-6032 | [1] | CONE-BEARING | ||
| 65. | 3T-2410 J | [1] | SHIELD-OIL | |
| 66. | 1T-1585 | [1] | CUP-BEARING | |
| 1T-1584 | [1] | CONE-BEARING | ||
| 67. | 7T-6163 J | [1] | SHIELD-RETAINER | |
| 68. | 2H-4337 J | [5] | SCREW-DRIVE (NO 10X0.5-IN) | |
| 69. | 7T-1445 | [1] | GEAR-OUTPUT (68-TEETH) | |
| 70. | 7L-2224 | [1] | SEAL-O-RING | |
| 71. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 72. | 2A-4576 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 6V-0957 | [1] | CONE-BEARING | ||
| 73. | 3T-2385 | [1] | FLANGE-OUTPUT | |
| 74. | 7L-2188 | [1] | SEAL-RUBBER | |
| 75. | 3T-2434 | [1] | WASHER-RETAINING | |
| 76. | 1D-4627 | [1] | BOLT (7/8-9X3-IN) | |
| 77. | 3T-2409 | [1] | SHAFT-OUTPUT (24 TEETH) | |
| 78. | 5N-5262 B | [2] | SHIM (.127MM THK) | |
| 5N-5264 B | [2] | SHIM (.508MM THK) | ||
| 79. | 3T-2384 J | [1] | DIVIDER-OIL | |
| 80. | 6S-6031 | [1] | CUP-BEARING | |
| 6S-6032 | [1] | CONE-BEARING | ||
| 81. | 3T-2427 | [1] | SPRING | |
| 82. | 7T-8746 | [1] | RING-LATHE CUT | |
| 83. | 3T-2400 J | [1] | PLATE | |
| 4B-4158 J | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 84. | 4F-8824 | [1] | SEAL-O-RING | |
| 85. | 3T-2399 | [1] | PLATE-CLUTCH | |
| 86. | 3T-2397 | [7] | PLATE (EXTERNAL TEETH) | |
| 3T-2398 | [6] | PLATE (INTERNAL TEETH) | ||
| 87. | 8B-7789 | [1] | RING-SNAP | |
| 88. | 3T-2405 | [1] | RING-SNAP | |
| 89. | 6V-4355 | [1] | RACE-THRUST BEARING | |
| 90. | 1T-1583 | [2] | RACE-THRUST BEARING | |
| 91. | 3T-2403 | [1] | RETAINER-SPRING | |
| 92. | 1T-1581 | [2] | BEARING-THRUST | |
| 93. | 1T-1582 | [1] | RACE-THRUST BEARING | |
| 94. | 3D-9126 | [1] | CUP | |
| 3D-9125 | [1] | CONE-BEARING | ||
| 95. | 3T-2425 | [1] | SPACER-BEARING | |
| 96. | 3T-2422 B | [3] | SHIM (0.13-MM THK) | |
| 3T-2423 B | [3] | SHIM (0.18-MM THK) | ||
| 3T-2424 B | [3] | SHIM (0.5-MM THK) | ||
| 97. | 6L-9736 | [2] | RING-PISTON | |
| 98. | 7E-1138 | [1] | SHAFT AS (57-TEETH) | |
| 99. | 2D-6642 | [2] | BALL | |
| 9F-8125 | [1] | LOCKWASHER | ||
| 100. | 6F-7002 | [1] | PIN | |
| 101. | 7T-1444 | [1] | PINION AS | |
| 102. | 3T-2396 | [1] | PISTON-CLUTCH | |
| 103. | 9Y-5810 J | [1] | CLOSURE | |
| B | USE AS REQUIRED | |||
| J | HOUSING AS MARKED J INCLUDES PARTS MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP19550442
7E-1139: TRANSMISSION GP-MARINE
7E-1139 TRANSMISSION GP-MARINE
S/N 01Z21747-99999
MG507A-1, 1.51:1 RATIO
AN ATTACHMENT
S/N 01Z21747-99999
MG507A-1, 1.51:1 RATIO
AN ATTACHMENT
For full view, you need register
Parts for your 3208 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-7909 | [1] | HOUSING AS | |
| 1T-0477 | [2] | DOWEL | ||
| 2H-4337 | [5] | SCREW-DRIVE (NO 10X0.5-IN) | ||
| 2N-8874 | [1] | FILLER & BREATHER AS (MARINE TRANSMISSION) | ||
| 3L-7620 | [1] | PLATE-IDENTIFICATION (ROTATION INDICATION) | ||
| 3T-2384 | [1] | DIVIDER-OIL | ||
| 3T-2410 | [1] | SHIELD-OIL | ||
| 3T-2412 | [1] | SHIELD-RETAINER | ||
| 3T-2432 | [1] | TUBE-SUCTION | ||
| 4B-4158 | [8] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 6V-1820 M | [2] | BOLT (M10X1.5X30-MM) | ||
| 7T-6163 | [1] | SHIELD-RETAINER | ||
| 2. | 6V-1820 M | [17] | BOLT (M10X1.5X30-MM) | |
| 3. | 3L-7620 | [1] | PLATE-IDENTIFICATION (ROTATION INDICATION) | |
| 4. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 5. | 9F-2247 | [1] | PLUG-PIPE | |
| 6. | 6V-4248 M | [5] | BOLT (M10X1.5X25-MM) | |
| 7. | 3T-3396 | [1] | EYEBOLT | |
| 8. | 2N-8875 Y | [1] | VALVE AS-SELECTOR (MARINE GEAR) | |
| 9. | 9Y-5811 | [1] | TUBE AS | |
| 10. | 9Y-5812 | [1] | GAUGE-OIL LEVEL (DIPSTICK) (MARINE TRANSMISSION) | |
| 11. | 1T-0477 | [2] | DOWEL | |
| 12. | 6V-2316 M | [1] | BOLT (M8X1.25X12-MM) | |
| 13. | 9N-0869 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 14. | 3S-9233 | [1] | SEAL-O-RING | |
| 15. | 3T-2383 | [1] | COVER-STRAINER | |
| 16. | 3B-7721 | [1] | BUSHING-REDUCER | |
| 17. | 6V-4249 M | [1] | BOLT (M10X1.5X50-MM) | |
| 18. | 7L-2227 | [1] | BREATHER (MARINE GEAR) | |
| 19. | 6S-6031 | [1] | CUP-BEARING | |
| 6S-6032 | [1] | CONE-BEARING | ||
| 20. | 3T-2433 | [2] | TUBE-CONNECTOR | |
| 21. | 2D-9190 | [1] | CUP-BEARING | |
| 1T-1580 | [1] | CONE-BEARING | ||
| 22. | 3T-2402 | [1] | PUMP-OIL | |
| 23. | 6V-3821 M | [4] | BOLT (M8X1.25X110-MM) | |
| 24. | 6L-9736 | [2] | RING-PISTON | |
| 25. | 2N-8870 | [1] | GASKET-PUMP MOUNTING | |
| 26. | 3T-2391 | [1] | MOUNT | |
| 27. | 3T-2436 | [1] | CLUTCH & PINION AS | |
| 28. | 3T-2416 B | [2] | SHIM (0.13-MM THK) | |
| 3T-2417 B | [2] | SHIM (0.18-MM THK) | ||
| 3T-2418 B | [2] | SHIM (.50MM THK) | ||
| 29. | 3T-2396 | [1] | PISTON-CLUTCH | |
| 30. | 3T-2397 | [7] | PLATE (EXTERNAL TEETH) | |
| 31. | 3T-2398 | [6] | PLATE (INTERNAL TEETH) | |
| 32. | 3T-2399 | [1] | PLATE-CLUTCH | |
| 33. | 4F-8824 | [1] | SEAL-O-RING | |
| 34. | 7T-8746 | [1] | RING-LATHE CUT | |
| 35. | 8B-7789 | [1] | RING-SNAP | |
| 36. | 3T-2427 | [1] | SPRING | |
| 37. | 3T-2405 | [1] | RING-SNAP | |
| 38. | 3T-2403 | [1] | RETAINER-SPRING | |
| 39. | 6V-4355 | [1] | RACE-THRUST BEARING | |
| 40. | 1T-1581 | [2] | BEARING-THRUST | |
| 41. | 1T-1582 | [1] | RACE-THRUST BEARING | |
| 42. | 1T-1583 | [2] | RACE-THRUST BEARING | |
| 43. | 7E-1137 | [1] | SHAFT AS (57-TEETH) | |
| 44. | 2D-6642 | [2] | BALL | |
| 9F-8125 | [1] | LOCKWASHER | ||
| 45. | 6F-7002 | [1] | PIN | |
| 46. | 3N-2321 | [1] | SCREEN AS-FILTER (MARINE TRANSMISSION) | |
| 47. | 8F-0208 | [1] | GROMMET | |
| 48. | 3T-2432 | [1] | TUBE-SUCTION | |
| 49. | 8L-2779 | [4] | SEAL-O-RING | |
| 50. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 51. | 3T-2419 B | [3] | SHIM (.13MM THK) | |
| 3T-2420 B | [3] | SHIM (.18MM THK) | ||
| 3T-2421 B | [3] | SHIM (.50MM THK) | ||
| 52. | 3T-2404 | [1] | RETAINER-BEARING | |
| 53. | 5K-2595 | [1] | SEAL-LIP TYPE | |
| 54. | 3T-2412 | [1] | SHIELD-RETAINER | |
| 55. | 7E-1142 | [1] | SHAFT-INPUT (54 TEETH) | |
| 56. | 6V-9506 | [1] | SEAL-LIP TYPE | |
| 57. | 5P-9652 | [1] | CUP-BEARING | |
| 5P-9651 | [1] | CONE-BEARING | ||
| 58. | 6V-3822 M | [8] | BOLT (M10X1.5X35-MM) | |
| 59. | 3T-2428 | [1] | SUPPORT-BEARING | |
| 60. | 3T-2413 B | [3] | SHIM (.13MM THK) | |
| 3T-2414 B | [3] | SHIM (.18MM THK) | ||
| 3T-2415 B | [3] | SHIM (.51MM THK) | ||
| 61. | 6V-4248 M | [16] | BOLT (M10X1.5X25-MM) | |
| 62. | 3T-2382 | [1] | ADAPTER | |
| 63. | 6V-9044 | [1] | CUP-BEARING | |
| 2P-8119 | [1] | CONE-BEARING | ||
| 64. | 3T-2410 | [1] | SHIELD-OIL | |
| 65. | 1T-1585 | [1] | CUP-BEARING | |
| 1T-1584 | [1] | CONE-BEARING | ||
| 66. | 7T-6163 | [1] | SHIELD-RETAINER | |
| 67. | 2H-4337 | [5] | SCREW-DRIVE (NO 10X0.5-IN) | |
| 68. | 3T-2435 | [1] | GEAR-OUTPUT (53-TEETH) | |
| 69. | 7L-2224 | [1] | SEAL-O-RING | |
| 70. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 71. | 2A-4576 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 6V-0957 | [1] | CONE-BEARING | ||
| 72. | 6L-9744 | [1] | FLANGE-OUTPUT | |
| 73. | 7L-2188 | [1] | SEAL-RUBBER | |
| 74. | 3T-2434 | [1] | WASHER-RETAINING | |
| 75. | 1D-4627 | [1] | BOLT (7/8-9X3-IN) | |
| 76. | 3T-2409 | [1] | SHAFT-OUTPUT (24 TEETH) | |
| 77. | 5N-5262 B | [2] | SHIM (.127MM THK) | |
| 5N-5264 B | [2] | SHIM (.508MM THK) | ||
| 78. | 3T-2384 | [1] | DIVIDER-OIL | |
| 79. | 6S-6031 | [1] | CUP-BEARING | |
| 6S-6032 | [1] | CONE-BEARING | ||
| 80. | 3T-2427 | [1] | SPRING | |
| 81. | 7T-8746 | [1] | RING-LATHE CUT | |
| 82. | 3T-2400 | [1] | PLATE | |
| 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 83. | 4F-8824 | [1] | SEAL-O-RING | |
| 84. | 3T-2399 | [1] | PLATE-CLUTCH | |
| 85. | 3T-2397 | [7] | PLATE (EXTERNAL TEETH) | |
| 3T-2398 | [6] | PLATE (INTERNAL TEETH) | ||
| 86. | 8B-7789 | [1] | RING-SNAP | |
| 87. | 3T-2405 | [1] | RING-SNAP | |
| 88. | 6V-4355 | [1] | RACE-THRUST BEARING | |
| 89. | 1T-1583 | [2] | RACE-THRUST BEARING | |
| 90. | 3T-2403 | [1] | RETAINER-SPRING | |
| 91. | 1T-1581 | [2] | BEARING-THRUST | |
| 92. | 1T-1582 | [1] | RACE-THRUST BEARING | |
| 93. | 3D-9126 | [1] | CUP | |
| 3D-9125 | [1] | CONE-BEARING | ||
| 94. | 3T-2425 | [1] | SPACER-BEARING | |
| 95. | 3T-2422 B | [3] | SHIM (0.13-MM THK) | |
| 3T-2423 B | [3] | SHIM (0.18-MM THK) | ||
| 3T-2424 B | [3] | SHIM (0.5-MM THK) | ||
| 96. | 6L-9736 | [2] | RING-PISTON | |
| 97. | 7E-1138 | [1] | SHAFT AS (57-TEETH) | |
| 98. | 2D-6642 | [2] | BALL | |
| 9F-8125 | [1] | LOCKWASHER | ||
| 99. | 6F-7002 | [1] | PIN | |
| 100. | 3T-2436 | [1] | CLUTCH & PINION AS | |
| 101. | 3T-2396 | [1] | PISTON-CLUTCH | |
| 102. | 9Y-5810 | [1] | CLOSURE | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP19550443
7E-1140: TRANSMISSION GP-MARINE
7E-1140 TRANSMISSION GP-MARINE
S/N 01Z21747-99999
MG507A-1, 1.98:1 RATIO
AN ATTACHMENT
S/N 01Z21747-99999
MG507A-1, 1.98:1 RATIO
AN ATTACHMENT
For full view, you need register
Parts for your 3208 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-7909 | [1] | HOUSING AS | |
| 1T-0477 | [2] | DOWEL | ||
| 2H-4337 | [5] | SCREW-DRIVE (NO 10X0.5-IN) | ||
| 2N-8874 | [1] | FILLER & BREATHER AS (MARINE TRANSMISSION) | ||
| 3L-7620 | [1] | PLATE-IDENTIFICATION (ROTATION INDICATION) | ||
| 3T-2384 | [1] | DIVIDER-OIL | ||
| 3T-2410 | [1] | SHIELD-OIL | ||
| 3T-2412 | [1] | SHIELD-RETAINER | ||
| 3T-2432 | [1] | TUBE-SUCTION | ||
| 4B-4158 | [8] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 6V-1820 M | [2] | BOLT (M10X1.5X30-MM) | ||
| 7T-6163 | [1] | SHIELD-RETAINER | ||
| 2. | 6V-1820 M | [17] | BOLT (M10X1.5X30-MM) | |
| 3. | 3L-7620 | [1] | PLATE-IDENTIFICATION (ROTATION INDICATION) | |
| 4. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 5. | 9F-2247 | [1] | PLUG-PIPE | |
| 6. | 6V-4248 M | [5] | BOLT (M10X1.5X25-MM) | |
| 7. | 3T-3396 | [1] | EYEBOLT | |
| 8. | 2N-8875 Y | [1] | VALVE AS-SELECTOR (MARINE GEAR) | |
| 9. | 9Y-5811 | [1] | TUBE AS | |
| 10. | 9Y-5812 | [1] | GAUGE-OIL LEVEL (DIPSTICK) (MARINE TRANSMISSION) | |
| 11. | 1T-0477 | [2] | DOWEL | |
| 12. | 6V-2316 M | [1] | BOLT (M8X1.25X12-MM) | |
| 13. | 9N-0869 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 14. | 3S-9233 | [1] | SEAL-O-RING | |
| 15. | 3T-2383 | [1] | COVER-STRAINER | |
| 16. | 3B-7721 | [1] | BUSHING-REDUCER | |
| 17. | 6V-4249 M | [1] | BOLT (M10X1.5X50-MM) | |
| 18. | 7L-2227 | [1] | BREATHER (MARINE GEAR) | |
| 19. | 6S-6031 | [1] | CUP-BEARING | |
| 6S-6032 | [1] | CONE-BEARING | ||
| 20. | 3T-2433 | [2] | TUBE-CONNECTOR | |
| 21. | 2D-9190 | [1] | CUP-BEARING | |
| 1T-1580 | [1] | CONE-BEARING | ||
| 22. | 3T-2402 | [1] | PUMP-OIL | |
| 23. | 6V-3821 M | [4] | BOLT (M8X1.25X110-MM) | |
| 24. | 6L-9736 | [2] | RING-PISTON | |
| 25. | 2N-8870 | [1] | GASKET-PUMP MOUNTING | |
| 26. | 3T-2391 | [1] | MOUNT | |
| 27. | 3T-2439 | [1] | CLUTCH & PINION AS | |
| 28. | 3T-2416 B | [2] | SHIM (0.13-MM THK) | |
| 3T-2417 B | [2] | SHIM (0.18-MM THK) | ||
| 3T-2418 B | [2] | SHIM (.50MM THK) | ||
| 29. | 3T-2396 | [1] | PISTON-CLUTCH | |
| 30. | 3T-2397 | [7] | PLATE (EXTERNAL TEETH) | |
| 31. | 3T-2398 | [6] | PLATE (INTERNAL TEETH) | |
| 32. | 3T-2399 | [1] | PLATE-CLUTCH | |
| 33. | 4F-8824 | [1] | SEAL-O-RING | |
| 34. | 7T-8746 | [1] | RING-LATHE CUT | |
| 35. | 8B-7789 | [1] | RING-SNAP | |
| 36. | 3T-2427 | [1] | SPRING | |
| 37. | 3T-2405 | [1] | RING-SNAP | |
| 38. | 3T-2403 | [1] | RETAINER-SPRING | |
| 39. | 6V-4355 | [1] | RACE-THRUST BEARING | |
| 40. | 1T-1581 | [2] | BEARING-THRUST | |
| 41. | 1T-1582 | [1] | RACE-THRUST BEARING | |
| 42. | 1T-1583 | [2] | RACE-THRUST BEARING | |
| 43. | 7E-1137 | [1] | SHAFT AS (57-TEETH) | |
| 44. | 2D-6642 | [2] | BALL | |
| 9F-8125 | [1] | LOCKWASHER | ||
| 45. | 6F-7002 | [1] | PIN | |
| 46. | 3N-2321 | [1] | SCREEN AS-FILTER (MARINE TRANSMISSION) | |
| 47. | 8F-0208 | [1] | GROMMET | |
| 48. | 3T-2432 | [1] | TUBE-SUCTION | |
| 49. | 8L-2779 | [4] | SEAL-O-RING | |
| 50. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 51. | 3T-2419 B | [3] | SHIM (.13MM THK) | |
| 3T-2420 B | [3] | SHIM (.18MM THK) | ||
| 3T-2421 B | [3] | SHIM (.50MM THK) | ||
| 52. | 3T-2404 | [1] | RETAINER-BEARING | |
| 53. | 5K-2595 | [1] | SEAL-LIP TYPE | |
| 54. | 3T-2412 | [1] | SHIELD-RETAINER | |
| 55. | 7E-1142 | [1] | SHAFT-INPUT | |
| 56. | 6V-9506 | [1] | SEAL-LIP TYPE | |
| 57. | 5P-9652 | [1] | CUP-BEARING | |
| 5P-9651 | [1] | CONE-BEARING | ||
| 58. | 6V-3822 M | [8] | BOLT (M10X1.5X35-MM) | |
| 59. | 3T-2428 | [1] | SUPPORT-BEARING | |
| 60. | 3T-2413 B | [3] | SHIM (.13MM THK) | |
| 3T-2414 B | [3] | SHIM (.18MM THK) | ||
| 3T-2415 B | [3] | SHIM (.51MM THK) | ||
| 61. | 6V-4248 M | [16] | BOLT (M10X1.5X25-MM) | |
| 62. | 3T-2382 | [1] | ADAPTER | |
| 63. | 6V-9044 | [1] | CUP-BEARING | |
| 2P-8119 | [1] | CONE-BEARING | ||
| 64. | 3T-2410 | [1] | SHIELD-OIL | |
| 65. | 1T-1585 | [1] | CUP-BEARING | |
| 1T-1584 | [1] | CONE-BEARING | ||
| 66. | 7T-6163 | [1] | SHIELD-RETAINER | |
| 67. | 2H-4337 | [5] | SCREW-DRIVE (NO 10X0.5-IN) | |
| 68. | 3T-2438 | [1] | GEAR (60-TEETH)(60 TEETH) | |
| 69. | 7L-2224 | [1] | SEAL-O-RING | |
| 70. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 71. | 2A-4576 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 6V-0957 | [1] | CONE-BEARING | ||
| 72. | 6L-9744 | [1] | FLANGE-OUTPUT | |
| 73. | 7L-2188 | [1] | SEAL-RUBBER | |
| 74. | 3T-2434 | [1] | WASHER-RETAINING | |
| 75. | 1D-4627 | [1] | BOLT (7/8-9X3-IN) | |
| 76. | 3T-2409 | [1] | SHAFT-OUTPUT (24 TEETH) | |
| 77. | 5N-5262 B | [2] | SHIM (.127MM THK) | |
| 5N-5264 B | [2] | SHIM (.508MM THK) | ||
| 78. | 3T-2384 | [1] | DIVIDER-OIL | |
| 79. | 6S-6031 | [1] | CUP-BEARING | |
| 6S-6032 | [1] | CONE-BEARING | ||
| 80. | 3T-2427 | [1] | SPRING | |
| 81. | 7T-8746 | [1] | RING-LATHE CUT | |
| 82. | 3T-2400 | [1] | PLATE | |
| 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 83. | 4F-8824 | [1] | SEAL-O-RING | |
| 84. | 3T-2399 | [1] | PLATE-CLUTCH | |
| 85. | 3T-2397 | [7] | PLATE (EXTERNAL TEETH) | |
| 3T-2398 | [6] | PLATE (INTERNAL TEETH) | ||
| 86. | 8B-7789 | [1] | RING-SNAP | |
| 87. | 3T-2405 | [1] | RING-SNAP | |
| 88. | 6V-4355 | [1] | RACE-THRUST BEARING | |
| 89. | 1T-1583 | [2] | RACE-THRUST BEARING | |
| 90. | 3T-2403 | [1] | RETAINER-SPRING | |
| 91. | 1T-1581 | [2] | BEARING-THRUST | |
| 92. | 1T-1582 | [1] | RACE-THRUST BEARING | |
| 93. | 3D-9126 | [1] | CUP | |
| 3D-9125 | [1] | CONE-BEARING | ||
| 94. | 3T-2425 | [1] | SPACER-BEARING | |
| 95. | 3T-2422 B | [3] | SHIM (0.13-MM THK) | |
| 3T-2423 B | [3] | SHIM (0.18-MM THK) | ||
| 3T-2424 B | [3] | SHIM (0.5-MM THK) | ||
| 96. | 6L-9736 | [2] | RING-PISTON | |
| 97. | 7E-1138 | [1] | SHAFT AS (57-TEETH) | |
| 98. | 2D-6642 | [2] | BALL | |
| 9F-8125 | [1] | LOCKWASHER | ||
| 99. | 6F-7002 | [1] | PIN | |
| 100. | 3T-2439 | [1] | CLUTCH & PINION AS | |
| 101. | 3T-2396 | [1] | PISTON-CLUTCH | |
| 102. | 9Y-5810 | [1] | CLOSURE | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP19550444
7E-1218: TRANSMISSION GP-MARINE
7E-1218 TRANSMISSION GP-MARINE
S/N 01Z21747-99999
MG507-1, 1.77:1 RATIO
FOR USE WITH 7E-1143 COUPLING AS
AN ATTACHMENT
S/N 01Z21747-99999
MG507-1, 1.77:1 RATIO
FOR USE WITH 7E-1143 COUPLING AS
AN ATTACHMENT
For full view, you need register
Parts for your 3208 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-6160 J | [1] | HOUSING AS | |
| 2. | 6V-1820 M | [2] | BOLT (M10X1.5X30-MM) | |
| 3. | 3L-7620 | [1] | PLATE-IDENTIFICATION (ROTATION INDICATION) | |
| 4. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 5. | 1T-0477 | [2] | DOWEL | |
| 6. | 6V-4248 M | [5] | BOLT (M10X1.5X25-MM) | |
| 7. | 3T-3396 | [1] | EYEBOLT | |
| 8. | 2N-8875 Y | [1] | VALVE AS-SELECTOR (MRAINE GEAR) | |
| 9. | 9Y-5811 | [1] | TUBE AS | |
| 10. | 9Y-5812 | [1] | GAUGE-OIL LEVEL (DIPSTICK) (MARINE TRANSMISSION) | |
| 11. | 9F-2247 | [1] | PLUG-PIPE | |
| 12. | 6V-2316 M | [1] | BOLT (M8X1.25X12-MM) | |
| 13. | 9N-0869 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 14. | 3S-9233 | [1] | SEAL-O-RING | |
| 15. | 3T-2383 | [1] | COVER-STRAINER | |
| 16. | 3B-7721 J | [1] | BUSHING-REDUCER | |
| 17. | 6V-4249 M | [1] | BOLT (M10X1.5X50-MM) | |
| 18. | 7L-2227 J | [1] | BREATHER (MARINE TRANSMISSION) | |
| 19. | 6V-1820 M | [15] | BOLT (M10X1.5X30-MM) | |
| 20. | 6S-6031 | [1] | CUP-BEARING | |
| 6S-6032 | [1] | CONE-BEARING | ||
| 21. | 3T-2433 | [2] | TUBE-CONNECTOR | |
| 22. | 2D-9190 | [1] | CUP-BEARING | |
| 1T-1580 | [1] | CONE-BEARING | ||
| 23. | 3T-2402 | [1] | PUMP-OIL | |
| 24. | 6V-3821 M | [4] | BOLT (M8X1.25X110-MM) | |
| 25. | 6L-9736 | [2] | RING-PISTON | |
| 26. | 2N-8870 | [1] | GASKET-PUMP MOUNTING | |
| 27. | 3T-2391 | [1] | MOUNT | |
| 28. | 7E-1220 | [1] | PINION AS (34-TEETH) | |
| 29. | 3T-2416 B | [2] | SHIM (0.13-MM THK) | |
| 3T-2417 B | [2] | SHIM (0.18-MM THK) | ||
| 3T-2418 B | [2] | SHIM (.50MM THK) | ||
| 30. | 3T-2396 | [1] | PISTON-CLUTCH | |
| 31. | 3T-2397 | [7] | PLATE (EXTERNAL TEETH) | |
| 32. | 3T-2398 | [6] | PLATE (INTERNAL TEETH) | |
| 33. | 3T-2399 | [1] | PLATE-CLUTCH | |
| 34. | 4F-8824 | [1] | SEAL-O-RING | |
| 35. | 7T-8746 | [1] | RING-LATHE CUT | |
| 36. | 8B-7789 | [1] | RING-SNAP | |
| 37. | 3T-2427 | [1] | SPRING | |
| 38. | 3T-2405 | [1] | RING-SNAP | |
| 39. | 3T-2403 | [1] | RETAINER-SPRING | |
| 40. | 6V-4355 | [1] | RACE-THRUST BEARING | |
| 41. | 1T-1581 | [2] | BEARING-THRUST | |
| 42. | 1T-1582 | [1] | RACE-THRUST BEARING | |
| 43. | 1T-1583 | [2] | RACE-THRUST BEARING | |
| 44. | 7E-1137 | [1] | SHAFT AS (57-TEETH) | |
| 45. | 2D-6642 | [2] | BALL | |
| 9F-8125 | [1] | LOCKWASHER | ||
| 46. | 6F-7002 | [1] | PIN | |
| 47. | 3N-2321 | [1] | SCREEN AS-FILTER (MARINE TRANSMISSION) | |
| 48. | 8F-0208 | [1] | GROMMET | |
| 49. | 3T-2432 J | [1] | TUBE-SUCTION | |
| 50. | 8L-2779 | [4] | SEAL-O-RING | |
| 51. | 3T-2404 | [1] | RETAINER-BEARING | |
| 52. | 3T-2419 B | [3] | SHIM (.13MM THK) | |
| 3T-2420 B | [3] | SHIM (.18MM THK) | ||
| 3T-2421 B | [3] | SHIM (.50MM THK) | ||
| 53. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 54. | 3T-2412 J | [1] | SHIELD-RETAINER | |
| 55. | 5K-2595 | [1] | SEAL-LIP TYPE | |
| 56. | 7E-1136 | [1] | SHAFT-INPUT (54-TEETH) | |
| 57. | 6V-9506 | [1] | SEAL-LIP TYPE | |
| 58. | 5P-9652 | [1] | CUP-BEARING | |
| 5P-9651 | [1] | CONE-BEARING | ||
| 59. | 6V-3822 M | [8] | BOLT (M10X1.5X35-MM) | |
| 60. | 3T-2428 | [1] | SUPPORT-BEARING | |
| 61. | 3T-2413 B | [3] | SHIM (.13MM THK) | |
| 3T-2414 B | [3] | SHIM (.18MM THK) | ||
| 3T-2415 B | [3] | SHIM (.51MM THK) | ||
| 62. | 6V-4248 M | [16] | BOLT (M10X1.5X25-MM) | |
| 63. | 3T-2382 | [1] | ADAPTER | |
| 64. | 6S-6031 | [1] | CUP-BEARING | |
| 6S-6032 | [1] | CONE-BEARING | ||
| 65. | 3T-2410 J | [1] | SHIELD-OIL | |
| 66. | 1T-1585 | [1] | CUP-BEARING | |
| 1T-1584 | [1] | CONE-BEARING | ||
| 67. | 7T-6163 J | [1] | SHIELD-RETAINER | |
| 68. | 2H-4337 J | [5] | SCREW-DRIVE (NO 10X0.5-IN) | |
| 69. | 7E-1219 | [1] | GEAR (57-TEETH) | |
| 70. | 7L-2224 | [1] | SEAL-O-RING | |
| 71. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 72. | 2A-4576 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 6V-0957 | [1] | CONE-BEARING | ||
| 73. | 6L-9744 | [1] | FLANGE-OUTPUT | |
| 74. | 7L-2188 | [1] | SEAL-RUBBER | |
| 75. | 3T-2434 | [1] | WASHER-RETAINING | |
| 76. | 1D-4627 | [1] | BOLT (7/8-9X3-IN) | |
| 77. | 3T-2409 | [1] | SHAFT-OUTPUT (24 TEETH) | |
| 78. | 5N-5262 B | [2] | SHIM (.127MM THK) | |
| 5N-5264 B | [2] | SHIM (.508MM THK) | ||
| 79. | 3T-2384 J | [1] | DIVIDER-OIL | |
| 80. | 6S-6031 | [1] | CUP-BEARING | |
| 6S-6032 | [1] | CONE-BEARING | ||
| 81. | 3T-2427 | [1] | SPRING | |
| 82. | 7T-8746 | [1] | RING-LATHE CUT | |
| 83. | 3T-2400 J | [1] | PLATE | |
| 4B-4158 J | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 84. | 4F-8824 | [1] | SEAL-O-RING | |
| 85. | 3T-2399 | [1] | PLATE-CLUTCH | |
| 86. | 3T-2397 | [7] | PLATE (EXTERNAL TEETH) | |
| 3T-2398 | [6] | PLATE (INTERNAL TEETH) | ||
| 87. | 8B-7789 | [1] | RING-SNAP | |
| 88. | 3T-2405 | [1] | RING-SNAP | |
| 89. | 6V-4355 | [1] | RACE-THRUST BEARING | |
| 90. | 1T-1583 | [2] | RACE-THRUST BEARING | |
| 91. | 3T-2403 | [1] | RETAINER-SPRING | |
| 92. | 1T-1581 | [2] | BEARING-THRUST | |
| 93. | 1T-1582 | [1] | RACE-THRUST BEARING | |
| 94. | 3D-9126 | [1] | CUP | |
| 3D-9125 | [1] | CONE-BEARING | ||
| 95. | 3T-2425 | [1] | SPACER-BEARING | |
| 96. | 3T-2422 B | [3] | SHIM (0.13-MM THK) | |
| 3T-2423 B | [3] | SHIM (0.18-MM THK) | ||
| 3T-2424 B | [3] | SHIM (0.5-MM THK) | ||
| 97. | 6L-9736 | [2] | RING-PISTON | |
| 98. | 7E-1138 | [1] | SHAFT AS (57-TEETH) | |
| 99. | 2D-6642 | [2] | BALL | |
| 9F-8125 | [1] | LOCKWASHER | ||
| 100. | 6F-7002 | [1] | PIN | |
| 101. | 7E-1220 | [1] | PINION AS (34-TEETH) | |
| 102. | 3T-2396 | [1] | PISTON-CLUTCH | |
| 103. | 9Y-5810 J | [1] | CLOSURE | |
| B | USE AS REQUIRED | |||
| J | HOUSING AS MARKED J INCLUDES PARTS MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP19550445
7T-6166: TRANSMISSION GP-MARINE
For full view, you need register
Parts for your 3208 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2N-8874 | [1] | FILLER & BREATHER AS (MARINE TRANSMISSION) | |
| 2. | 3T-5161 Y | [1] | VALVE AS-SELECTOR (MARINE GEAR) | |
| 3. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 0S-1590 | [1] | BOLT (3/8-16X2-IN) | ||
| 4. | 8L-2779 | [4] | SEAL-O-RING | |
| 5. | 2N-8879 | [2] | TUBE-CONNECTOR | |
| 6. | 7E-1182 | [1] | GAUGE-OIL LEVEL (DIPSTICK) (MARINE TRANSMISSION) | |
| 7. | 6T-6971 | [1] | HOUSING AS | |
| 8. | 0S-1617 | [3] | BOLT (5/16-18X0.75-IN) | |
| 9. | 2N-9018 | [1] | COVER | |
| 2N-9019 | [1] | GASKET-COVER | ||
| 10. | 2N-8878 | [1] | SCREEN AS-FILTER (MARINE TRANSMISSION) | |
| 11. | 7L-2180 | [1] | SEAL-O-RING | |
| 12. | 2N-8871 | [1] | MOUNT AS-PUMP | |
| 13. | 3N-2667 | [1] | PUMP AS-OIL | |
| 14. | 7E-1183 | [1] | TUBE AS | |
| 15. | 2K-9092 | [2] | RING-METAL SEAL | |
| 16. | 6L-9718 | [2] | PISTON-CLUTCH | |
| 17. | 5N-2614 | [2] | SEAL-RING | |
| 18. | 6L-9717 | [2] | SPRING-CLUTCH PISTON | |
| 19. | 6L-9719 | [16] | PLATE-CLUTCH | |
| 20. | 3T-9293 | [18] | PLATE-CLUTCH | |
| 21. | 6L-9721 | [2] | RING-RETAINING | |
| 22. | 6L-9724 | [2] | RING-RETAINING | |
| 23. | 6L-9725 | [2] | PLATE-BACKING | |
| 24. | 6L-9726 | [4] | RING-THRUST | |
| 8M-4342 | [4] | BEARING-THRUST | ||
| 25. | 7E-1105 | [1] | SHAFT-OUTPUT | |
| 26. | 6L-9743 | [1] | FLANGE-OUTPUT | |
| 27. | 2N-2430 | [1] | WASHER | |
| 28. | 2L-1701 | [1] | BOLT (5/8-18X1.5-IN) | |
| 29. | 4L-4934 | [1] | GASKET-NUT | |
| 30. | 7L-2375 | [1] | SEAL-LIP TYPE | |
| 31. | 2B-3380 | [1] | CUP | |
| 6L-9749 | [1] | CONE-BEARING | ||
| 32. | 7E-1106 | [1] | GEAR-OUTPUT (54-TEETH)(54 TEETH) | |
| 33. | 2D-9190 | [1] | CUP-BEARING | |
| 6L-9762 | [1] | CONE-BEARING | ||
| 34. | 9W-7339 C | [1] | SHAFT-INPUT & GEAR (48 TEETH) | |
| 35. | 6L-9773 | [1] | CUP-BEARING | |
| 6L-9774 | [1] | CONE-BEARING | ||
| 36. | 7L-2343 | [1] | SEAL-LIP TYPE | |
| 37. | 002-1214 | [1] | CUP-BEARING | |
| 003-5263 | [1] | CONE-BEARING | ||
| 38. | 6L-5218 | [1] | KEY | |
| 39. | 7M-7260 B | GASKET-LIQUID (8-OZ CAN) | ||
| 40. | 6L-9752 B | [3] | SHIM-BEARING (.127MM) | |
| 6L-9753 B | [3] | SHIM-BEARING (.178MM) | ||
| 6L-9754 B | [3] | SHIM-BEARING (.508MM) | ||
| 41. | 0S-1595 | [3] | BOLT (1/2-13X1.25-IN) | |
| 42. | 6L-9750 | [1] | RETAINER-BEARING | |
| 43. | 3N-2317 | [1] | SPIDER-DRIVE | |
| 44. | 6L-9765 B | [3] | SHIM-BEARING (.127MM) | |
| 6L-9766 B | [3] | SHIM-BEARING (.178MM) | ||
| 6L-9767 B | [3] | SHIM-BEARING (.508MM) | ||
| 45. | 3N-2366 | [1] | SHAFT & GEAR AS (48 TEETH) (FWD) | |
| 46. | 3D-9126 | [4] | CUP | |
| 6L-9790 | [4] | CONE-BEARING | ||
| 47. | 3N-2370 | [2] | GEAR AS (36-TEETH) | |
| (EACH INCLUDES) | ||||
| 3N-2360 | [1] | BUSHING-TERMINAL | ||
| 48. | 6L-9742 | [2] | RACE-THRUST BEARING (3.94MM) | |
| 6L-9722 | [2] | RING-THRUST (3.16MM) | ||
| 49. | 6L-9736 | [4] | RING-PISTON | |
| 50. | 2N-8870 | [1] | GASKET-PUMP MOUNTING | |
| 51. | 0S-1594 | [9] | BOLT (3/8-16X1-IN) | |
| 52. | 3N-2367 | [1] | SHAFT & GEAR AS (48 TEETH) (REV) | |
| 53. | 5N-2557 | [1] | SUPPORT-BEARING | |
| 54. | 4H-9457 | [1] | WASHER (10-MM THK) | |
| 55. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 56. | 3N-4030 | [1] | RING-DRIVE | |
| 57. | 2N-4619 | [20] | BLOCK-RUBBER | |
| 58. | 7M-7260 B | GASKET-LIQUID (8-OZ CAN) | ||
| 59. | [1] | PLATE-INSTRUCTION (MARINE TRANSMISSION) | ||
| 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 2N-8881 B | [1] | SHIM PACK (INCLUDES 9-SHIMS) | ||
| 2N-8882 B | [1] | SHIM PACK (INCLUDES 9-SHIMS) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP19550446
7T-6167: TRANSMISSION GP-MARINE
For full view, you need register
Parts for your 3208 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2N-8874 | [1] | FILLER & BREATHER AS (MARINE TRANSMISSION) | |
| 2. | 3T-5161 Y | [1] | VALVE AS-SELECTOR (MARINE GEAR) | |
| 3. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 0S-1590 | [1] | BOLT (3/8-16X2-IN) | ||
| 4. | 3N-2667 | [1] | PUMP AS-OIL | |
| 5. | 8L-2779 | [4] | SEAL-O-RING | |
| 6. | 7E-1182 | [1] | GAUGE-OIL LEVEL (DIPSTICK) (MARINE TRANSMISSION) | |
| 7. | 6T-6971 | [1] | HOUSING AS | |
| 8. | 7E-1183 | [1] | TUBE AS | |
| 9. | 0S-1617 | [3] | BOLT (5/16-18X0.75-IN) | |
| 10. | 2N-9018 | [1] | COVER | |
| 2N-9019 | [1] | GASKET-COVER | ||
| 11. | 2N-8878 | [1] | SCREEN AS-FILTER (MARINE TRANSMISSION) | |
| 12. | 7L-2180 | [1] | SEAL-O-RING | |
| 13. | 2N-8879 | [2] | TUBE-CONNECTOR | |
| 14. | 2N-8871 | [1] | MOUNT AS-PUMP | |
| 15. | 2K-9092 | [2] | RING-METAL SEAL | |
| 16. | 6L-9718 | [2] | PISTON-CLUTCH | |
| 17. | 5N-2614 | [2] | SEAL-RING | |
| 18. | 6L-9717 | [2] | SPRING-CLUTCH PISTON | |
| 19. | 6L-9719 | [16] | PLATE-CLUTCH | |
| 20. | 3T-9293 | [18] | PLATE-CLUTCH | |
| 21. | 6L-9721 | [2] | RING-RETAINING | |
| 22. | 6L-9724 | [2] | RING-RETAINING | |
| 23. | 6L-9725 | [2] | PLATE-BACKING | |
| 24. | 6L-9726 | [4] | RING-THRUST | |
| 8M-4342 | [4] | BEARING-THRUST | ||
| 25. | 7E-1105 | [1] | SHAFT-OUTPUT | |
| 26. | 6L-9743 | [1] | FLANGE-OUTPUT | |
| 27. | 2N-2430 | [1] | WASHER | |
| 28. | 2L-1701 | [1] | BOLT (5/8-18X1.5-IN) | |
| 29. | 4L-4934 | [1] | GASKET-NUT | |
| 30. | 7L-2375 | [1] | SEAL-LIP TYPE | |
| 31. | 2B-3380 | [1] | CUP | |
| 6L-9749 | [1] | CONE-BEARING | ||
| 32. | 7E-1107 | [1] | GEAR-OUTPUT (59 TEETH) | |
| 33. | 2D-9190 | [1] | CUP-BEARING | |
| 6L-9762 | [1] | CONE-BEARING | ||
| 34. | 9W-7339 C | [1] | SHAFT-INPUT & GEAR (48 TEETH) | |
| 35. | 6L-9773 | [1] | CUP-BEARING | |
| 6L-9774 | [1] | CONE-BEARING | ||
| 36. | 7L-2343 | [1] | SEAL-LIP TYPE | |
| 37. | 002-1214 | [1] | CUP-BEARING | |
| 003-5263 | [1] | CONE-BEARING | ||
| 38. | 6L-5218 | [1] | KEY | |
| 39. | 7M-7260 B | GASKET-LIQUID (8-OZ CAN) | ||
| 40. | 6L-9752 B | [3] | SHIM-BEARING (.127MM) | |
| 6L-9753 B | [3] | SHIM-BEARING (.178MM) | ||
| 6L-9754 B | [3] | SHIM-BEARING (.508MM) | ||
| 41. | 0S-1595 | [3] | BOLT (1/2-13X1.25-IN) | |
| 42. | 6L-9750 | [1] | RETAINER-BEARING | |
| 43. | 3N-2317 | [1] | SPIDER-DRIVE | |
| 44. | 6L-9765 B | [3] | SHIM-BEARING (.127MM) | |
| 6L-9766 B | [3] | SHIM-BEARING (.178MM) | ||
| 6L-9767 B | [3] | SHIM-BEARING (.508MM) | ||
| 45. | 3N-2366 | [1] | SHAFT & GEAR AS (48 TEETH) (FWD) | |
| 46. | 3D-9126 | [4] | CUP | |
| 6L-9790 | [4] | CONE-BEARING | ||
| 47. | 3N-2374 | [2] | GEAR AS (36-TEETH)(30 TEETH) | |
| (EACH INCLUDES) | ||||
| 3N-2360 | [1] | BUSHING-TERMINAL | ||
| 48. | 6L-9742 | [2] | RACE-THRUST BEARING (3.94MM) | |
| 6L-9722 | [2] | RING-THRUST (3.16MM) | ||
| 49. | 6L-9736 | [4] | RING-PISTON | |
| 50. | 2N-8870 | [1] | GASKET-PUMP MOUNTING | |
| 51. | 0S-1594 | [9] | BOLT (3/8-16X1-IN) | |
| 52. | 3N-2367 | [1] | SHAFT & GEAR AS (48 TEETH) (REV) | |
| 53. | 5N-2557 | [1] | SUPPORT-BEARING | |
| 54. | 4H-9457 | [1] | WASHER (10-MM THK) | |
| 55. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 56. | 3N-4030 | [1] | RING-DRIVE | |
| 57. | 2N-4619 | [20] | BLOCK-RUBBER | |
| 58. | 7M-7260 B | GASKET-LIQUID (8-OZ CAN) | ||
| 59. | [1] | PLATE-INSTRUCTION (MARINE TRANSMISSION) | ||
| 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 2N-8881 B | [1] | SHIM PACK (INCLUDES 9-SHIMS) | ||
| 2N-8882 B | [1] | SHIM PACK (INCLUDES 9-SHIMS) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP19550447
7T-6168: TRANSMISSION GP-MARINE
For full view, you need register
Parts for your 3208 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2N-8874 | [1] | FILLER & BREATHER AS (TRANSMISSION) | |
| 2. | 2N-8875 Y | [1] | VALVE AS-SELECTOR (MARINE GEAR) | |
| 3. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 0S-1590 | [1] | BOLT (3/8-16X2-IN) | ||
| 4. | 7L-2180 | [1] | SEAL-O-RING | |
| 5. | 8L-2779 | [4] | SEAL-O-RING | |
| 6. | 7E-1182 | [1] | GAUGE-OIL LEVEL (DIPSTICK) (MARINE TRANSMISSION) | |
| 7. | 6T-6972 | [1] | HOUSING AS | |
| 8. | 2N-8879 | [2] | TUBE-CONNECTOR | |
| 9. | 7E-1183 | [1] | TUBE AS | |
| 10. | 0S-1617 | [3] | BOLT (5/16-18X0.75-IN) | |
| 11. | 2N-9018 | [1] | COVER | |
| 2N-9019 | [1] | GASKET-COVER | ||
| 12. | 3N-2321 | [1] | SCREEN AS-FILTER (MARINE TRANSMISSION) | |
| 13. | [1] | PLATE-INSTRUCTION (MARINE TRANSMISSION) | ||
| 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 14. | 3N-2318 | [1] | SHAFT & GEAR AS (48 TEETH) (FWD) | |
| 15. | 2K-9092 | [2] | RING-METAL SEAL | |
| 16. | 6L-9717 | [2] | SPRING-CLUTCH PISTON | |
| 17. | 6L-9721 | [2] | RING-RETAINING | |
| 18. | 6L-9726 | [4] | RING-THRUST (.762MM THK) | |
| 6L-9722 | [2] | RING-THRUST (3.16MM THK) | ||
| 8M-4342 | [4] | BEARING-THRUST | ||
| 19. | 3N-2314 | [2] | GEAR AS (26 TEETH) | |
| (EACH INCLUDES) | ||||
| 3N-2315 | [1] | BUSHING-TERMINAL | ||
| 20. | 6L-9742 | [2] | RACE-THRUST BEARING | |
| 21. | 6L-9736 | [4] | RING-PISTON | |
| 22. | 2N-8870 | [1] | GASKET-PUMP MOUNTING | |
| 23. | 0S-1594 | [9] | BOLT (3/8-16X1-IN) | |
| 24. | 3N-2667 | [1] | PUMP AS-OIL | |
| 25. | 3N-2319 | [1] | SHAFT & GEAR AS (REV) | |
| 26. | 3N-4030 | [1] | RING-DRIVE | |
| 27. | 2N-4619 | [20] | BLOCK-RUBBER | |
| 28. | 6L-9765 B | [3] | SHIM-BEARING (.127MM THK) | |
| 6L-9766 B | [3] | SHIM-BEARING (.178MM THK) | ||
| 6L-9767 B | [3] | SHIM-BEARING (.508MM THK) | ||
| 29. | 5N-2557 | [1] | SUPPORT-BEARING | |
| 30. | 3D-9126 | [4] | CUP | |
| 6L-9790 | [4] | CONE-BEARING | ||
| 31. | 3N-2317 | [1] | SPIDER-DRIVE | |
| 32. | 2N-8871 | [1] | MOUNT AS-PUMP | |
| 33. | 7M-7260 B | GASKET-LIQUID (8-OZ CAN) | ||
| 34. | 6L-9718 | [2] | PISTON-CLUTCH | |
| 35. | 5N-2614 | [2] | SEAL-RING | |
| 36. | 3T-9293 | [18] | PLATE-CLUTCH | |
| 37. | 6L-9719 | [16] | PLATE-CLUTCH | |
| 38. | 6L-9724 | [2] | RING-RETAINING | |
| 39. | 6L-9725 | [2] | PLATE-BACKING | |
| 40. | 6L-5218 | [1] | KEY | |
| 41. | 7L-2188 | [1] | SEAL-RUBBER | |
| 42. | 0S-1629 | [3] | BOLT (1/2-20X1-IN) | |
| 43. | 6L-9746 | [1] | WASHER-RETAINING | |
| 44. | 6L-9744 | [1] | FLANGE-OUTPUT | |
| 45. | 1M-3003 | [1] | SEAL-LIP TYPE | |
| 46. | 0S-1594 | [6] | BOLT (3/8-16X1-IN) | |
| 47. | 6L-9751 | [1] | RETAINER-BEARING | |
| 48. | 6L-9755 B | [3] | SHIM-BEARING (.127MM THK) | |
| 6L-9756 B | [3] | SHIM-BEARING (.178MM THK) | ||
| 6L-9757 B | [3] | SHIM-BEARING (.508MM THK) | ||
| 49. | 2A-4576 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 6V-0957 | [1] | CONE-BEARING | ||
| 50. | 7E-1156 | [1] | SHAFT-OUTPUT | |
| 51. | 7E-1155 | [1] | GEAR-OUTPUT (65 TEETH) | |
| 52. | 6L-9763 | [1] | CUP-BEARING | |
| 6L-9764 | [1] | CONE-BEARING | ||
| 53. | 9W-7339 C | [1] | SHAFT-INPUT & GEAR (48 TEETH) | |
| 54. | 6L-9773 | [1] | CUP-BEARING | |
| 6L-9774 | [1] | CONE-BEARING | ||
| 55. | 002-1214 | [1] | CUP-BEARING | |
| 003-5263 | [1] | CONE-BEARING | ||
| 56. | 7L-2343 | [1] | SEAL-LIP TYPE | |
| 57. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 58. | 4H-9457 | [1] | WASHER (10-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 2N-8881 B | [1] | SHIM PACK (INCLUDES 9-SHIMS) | ||
| 2N-8882 B | [1] | SHIM PACK (INCLUDES 9-SHIMS) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP19550448
7T-6169: TRANSMISSION GP-MARINE
For full view, you need register
Parts for your 3208 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3N-2318 | [1] | SHAFT & GEAR AS (48 TEETH) (FWD) | |
| 2. | 6L-9718 | [2] | PISTON-CLUTCH | |
| 3. | 5N-2614 | [2] | SEAL-RING | |
| 4. | 2K-9092 | [2] | RING-METAL SEAL | |
| 5. | 6L-9717 | [2] | SPRING-CLUTCH PISTON | |
| 6. | 3T-9293 | [18] | PLATE-CLUTCH | |
| 7. | 6L-9719 | [16] | PLATE-CLUTCH | |
| 8. | 6L-9721 | [2] | RING-RETAINING | |
| 9. | 6L-9725 | [2] | PLATE-BACKING | |
| 10. | 6L-9724 | [2] | RING-RETAINING | |
| 11. | 6L-9726 | [4] | RING-THRUST (.76MM) | |
| 6L-9722 | [2] | RING-THRUST (3.16MM) | ||
| 12. | 3N-2327 | [2] | GEAR AS (23 TEETH) | |
| (EACH INCLUDES) | ||||
| 13. | 3N-2315 | [1] | BUSHING-TERMINAL | |
| 14. | 8M-4342 | [4] | BEARING-THRUST | |
| 15. | 6L-9742 | [2] | RACE-THRUST BEARING | |
| 16. | 6L-9736 | [4] | RING-PISTON | |
| 17. | 2N-8870 | [1] | GASKET-PUMP MOUNTING | |
| 18. | 3N-2667 | [1] | PUMP AS-OIL | |
| 19. | 2N-8871 | [1] | MOUNT AS-PUMP | |
| 20. | 3N-2319 | [1] | SHAFT & GEAR AS | |
| (REVERSE-48 TEETH) | ||||
| 21. | 0S-1594 | [3] | BOLT (3/8-16X1-IN) | |
| 22. | 7M-7260 B | GASKET-LIQUID (8-OZ CAN) | ||
| 23. | 3D-9126 | [4] | CUP | |
| 6L-9790 | [4] | CONE-BEARING | ||
| 24. | 3N-4030 | [1] | RING-DRIVE | |
| 25. | 2N-4619 | [20] | BLOCK-RUBBER | |
| 26. | 0S-1594 | [12] | BOLT (3/8-16X1-IN) | |
| 27. | 3N-2317 | [1] | SPIDER-DRIVE | |
| 28. | 5N-2557 | [1] | SUPPORT-BEARING | |
| 29. | 6L-9765 B | [3] | SHIM-BEARING (.13MM) | |
| 6L-9766 B | [3] | SHIM-BEARING (.18MM) | ||
| 6L-9767 B | [3] | SHIM-BEARING (.51MM) | ||
| 30. | [1] | PLATE-INSTRUCTION (MARINE TRANSMISSION) | ||
| 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 31. | 7L-2188 | [1] | SEAL-RUBBER | |
| 32. | 0S-1629 | [3] | BOLT (1/2-20X1-IN) | |
| 33. | 6L-9746 | [1] | WASHER-RETAINING | |
| 34. | 6L-9744 | [1] | FLANGE-OUTPUT | |
| 35. | 1M-3003 | [1] | SEAL-LIP TYPE | |
| 36. | 6L-5218 | [1] | KEY | |
| 37. | 6L-9751 | [1] | RETAINER-BEARING | |
| 38. | 6L-9755 B | [3] | SHIM-BEARING (.13MM) | |
| 6L-9756 B | [3] | SHIM-BEARING (.18MM) | ||
| 6L-9757 B | [3] | SHIM-BEARING (.51MM) | ||
| 39. | 7M-7260 B | GASKET-LIQUID (8-OZ CAN) | ||
| 40. | 2A-4576 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 6V-0957 | [1] | CONE-BEARING | ||
| 41. | 7E-1157 | [1] | GEAR-OUTPUT (68 TEETH) | |
| 42. | 7E-1156 | [1] | SHAFT-OUTPUT | |
| 43. | 6L-9763 | [1] | CUP-BEARING | |
| 6L-9764 | [1] | CONE-BEARING | ||
| 44. | 9W-7339 C | [1] | SHAFT-INPUT & GEAR (48 TEETH) | |
| 45. | 6L-9773 | [1] | CUP-BEARING | |
| 6L-9774 | [1] | CONE-BEARING | ||
| 46. | 002-1214 | [1] | CUP-BEARING | |
| 003-5263 | [1] | CONE-BEARING | ||
| 47. | 7L-2343 | [1] | SEAL-LIP TYPE | |
| 48. | 4H-9457 | [1] | WASHER (10-MM THK) | |
| 49. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 50. | 2N-8874 | [1] | FILLER & BREATHER AS (MARINE TRANSMISSION) | |
| 51. | 2N-8875 Y | [1] | VALVE AS-SELECTOR (MARINE GEAR) | |
| 52. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 0S-1590 | [1] | BOLT (3/8-16X2-IN) | ||
| 53. | 3N-2321 | [1] | SCREEN AS-FILTER (MARINE TRANSMISSION) | |
| 54. | 7L-2180 | [1] | SEAL-O-RING | |
| 55. | 7E-1182 | [1] | GAUGE-OIL LEVEL (DIPSTICK) (MARINE TRANSMISSION) | |
| 56. | 6T-6972 | [1] | HOUSING AS | |
| 57. | 8L-2779 | [4] | SEAL-O-RING | |
| 58. | 2N-8879 | [2] | TUBE-CONNECTOR | |
| 59. | 7E-1183 | [1] | TUBE AS | |
| 60. | 0S-1617 | [3] | BOLT (5/16-18X0.75-IN) | |
| 61. | 2N-9018 | [1] | COVER | |
| 2N-9019 | [1] | GASKET-COVER | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 2N-8882 B | [1] | SHIM PACK (INCLUDES 9-SHIMS) | ||
| 2N-8881 B | [1] | SHIM PACK (INCLUDES 9-SHIMS) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP19550449
9W-1038: TRANSMISSION GP-MARINE
For full view, you need register
Parts for your 3208 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2N-8874 | [1] | FILLER & BREATHER AS (MARINE TRANSMISSION) | |
| 2. | 3T-5161 Y | [1] | VALVE AS-SELECTOR (MARINE GEAR) | |
| 3. | 0S-1590 | [1] | BOLT (3/8-16X2-IN) | |
| 4. | 0S-1594 | [21] | BOLT (3/8-16X1-IN) | |
| 5. | 7L-2602 | [1] | GAUGE-OIL LEVEL (DIPSTICK) (MARINE TRANSMISSION) | |
| 6. | 2N-8880 | [1] | TUBE AS-OIL GAUGE | |
| 7. | 9W-0835 | [1] | HOUSING AS | |
| 9W-0832 | [1] | DIVIDER-OIL | ||
| 6B-8208 | [1] | BALL | ||
| 8. | 2B-0947 | [2] | BOLT (1/2-13X2.25-IN) | |
| 9. | 0S-1595 | [8] | BOLT (1/2-13X1.25-IN) | |
| 10. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 2M-9780 | [1] | SEAL-O-RING | ||
| 11. | 4L-9793 | [2] | DOWEL | |
| 12. | 3N-2667 | [1] | PUMP AS-OIL | |
| 13. | 2N-8871 | [1] | MOUNT AS-PUMP | |
| 14. | 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 15. | 6L-9790 | [4] | CONE-BEARING | |
| 16. | 3D-9126 | [4] | CUP | |
| 17. | 6L-9717 | [2] | SPRING-CLUTCH PISTON | |
| 18. | 6L-9718 | [2] | PISTON-CLUTCH | |
| 19. | 5N-2614 | [2] | SEAL-RING | |
| 20. | 3T-9293 | [18] | PLATE-CLUTCH | |
| 21. | 6L-9719 | [16] | PLATE-CLUTCH | |
| 22. | 6L-9722 | [2] | RING-THRUST | |
| 23. | 8M-4342 | [4] | BEARING-THRUST | |
| 24. | 6L-9724 | [2] | RING-RETAINING | |
| 25. | 6L-9726 | [4] | RING-THRUST | |
| 26. | 6L-9725 | [2] | PLATE-BACKING | |
| 27. | 3N-2370 | [2] | GEAR AS (36-TEETH)(36 TEETH) | |
| (EACH INCLUDES) | ||||
| 3N-2315 | [1] | BUSHING-TERMINAL | ||
| 28. | 6L-9736 | [4] | RING-PISTON | |
| 29. | 6L-9742 | [2] | RACE-THRUST BEARING | |
| 30. | 8L-2779 | [4] | SEAL-O-RING | |
| 31. | 6V-4427 | [1] | SEAL-LIP TYPE | |
| 32. | 2L-1701 | [1] | BOLT (5/8-18X1.5-IN) | |
| 33. | 2N-2430 | [1] | WASHER | |
| 34. | 4L-4934 | [1] | GASKET-NUT | |
| 35. | 6L-9749 | [1] | CONE-BEARING | |
| 36. | 2B-3380 | [1] | CUP | |
| 37. | 6L-9743 | [1] | FLANGE-OUTPUT | |
| 38. | 0S-1594 | [21] | BOLT (3/8-16X1-IN) | |
| 39. | 6L-9750 | [1] | RETAINER-BEARING | |
| 40. | 7E-1105 | [1] | SHAFT-OUTPUT | |
| 41. | 7E-1106 | [1] | GEAR-OUTPUT (54-TEETH) | |
| 42. | 6L-9762 | [1] | CONE-BEARING | |
| 43. | 2D-9190 | [1] | CUP-BEARING | |
| 44. | 2M-9780 | [1] | SEAL-O-RING | |
| 45. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 46. | 9W-0832 | [1] | DIVIDER-OIL | |
| 47. | 6L-9773 | [1] | CUP-BEARING | |
| 48. | 6L-9774 | [1] | CONE-BEARING | |
| 49. | 3T-2382 | [1] | ADAPTER | |
| 50. | 2N-4619 | [20] | BLOCK-RUBBER | |
| 51. | 5N-2557 | [1] | SUPPORT-BEARING | |
| 52. | 002-1214 | [1] | CUP-BEARING | |
| 53. | 003-5263 | [1] | CONE-BEARING | |
| 54. | 9W-0834 | [1] | SHAFT-INPUT & GEAR (48 TEETH) | |
| 55. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 56. | 6L-5218 | [1] | KEY | |
| 57. | 4H-9457 | [1] | WASHER (10-MM THK) | |
| 58. | 4J-5918 | [1] | SEAL-LIP TYPE | |
| 59. | 6L-9721 | [2] | RING-RETAINING | |
| 60. | 2K-9092 | [2] | RING-METAL SEAL | |
| 61. | 3N-2317 | [1] | SPIDER-DRIVE | |
| 62. | 3N-4030 | [1] | RING-DRIVE | |
| 63. | 0S-1595 | [2] | BOLT (1/2-13X1.25-IN) | |
| 64. | 2N-8870 | [1] | GASKET-PUMP MOUNTING | |
| 65. | 3N-2367 | [1] | SHAFT & GEAR AS (48 TEETH) (REV) | |
| 66. | 8L-2779 | [4] | SEAL-O-RING | |
| 67. | 2N-8879 | [2] | TUBE-CONNECTOR | |
| 68. | 9W-0833 | [1] | SHAFT & GEAR AS (48/68-TEETH) | |
| 69. | 6B-8208 | [1] | BALL | |
| 70. | 2N-8878 | [1] | SCREEN AS-FILTER (MARINE TRANSMISSION) | |
| 71. | 7L-2180 | [1] | SEAL-O-RING | |
| 72. | 2N-9018 | [1] | COVER | |
| 73. | 0S-1617 | [3] | BOLT (5/16-18X0.75-IN) | |
| 74. | 2N-9019 | [1] | GASKET-COVER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 6T-6973 | [1] | KIT-GASKET (MARINE TRANSMISSION) | ||
| (FOR USE WITH PARTS MARKED J) | ||||
| 2N-8881 B | [1] | SHIM PACK (INCLUDES 9-SHIMS) | ||
| 2N-8882 B | [1] | SHIM PACK (INCLUDES 9-SHIMS) | ||
| 9W-1045 B | [1] | SHIM PACK (INPUT) | ||
| 9W-1047 B | [1] | SHIM PACK (OUTPUT) | ||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
MARINE TRANSMISSION
TRANSMISSION GP-MARINE
Engine News
Operation and Maintenance Manual
Service Letter-NACD
Product Improvement Program For Marine Transmission Failures In Certain Grand Banks And Eastbay Boats
Product Improvement Program For Marine Transmission Failures In Certain Grand Banks And Eastbay Boats
Product Improvement Program For Marine Transmission Failures In Certain Grand Banks And Eastbay Boats
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Truck/Ag/Marine
Specifications
Service Letter-China
Product Improvement Program For Marine Transmission Failures In Certain Grand Banks And Eastbay Boats
Product Improvement Program For Marine Transmission Failures In Certain Grand Banks And Eastbay Boats
Product Improvement Program For Marine Transmission Failures In Certain Grand Banks And Eastbay Boats
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Service Magazine
Caterpillar Parts SIS Catalog 3208 :
Truck sale:
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
