3406B Truck Engine(PEEC) 2EK00001-UP BASIC ENGINE Caterpillar SIS




TRUCK ENGINE 3406B TRUCK ENGINE 2EK
 3406B Truck Engine(PEEC) 2EK00001-UP SEBP1956 3406B 2EK   (1990)

Parts group 3406B:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR GP
1N-2995 AIR COMPRESSOR GP
1N-2995 AIR COMPRESSOR GP
S/N 2EK1-1617
PART OF 354-7531 AIR COMPRESSOR GP
AIR COMPRESSOR GP
1N-2997 AIR COMPRESSOR GP
1N-2997 AIR COMPRESSOR GP
S/N 2EK1-1617
12 CFM, GEAR DRIVEN DRIVE RATIO 1:1
AIR COMPRESSOR GP
354-7531 AIR COMPRESSOR GP
354-7531 AIR COMPRESSOR GP
S/N 2EK1-1617
PART OF 1N-2997 AIR COMPRESSOR GP
AIR COMPRESSOR GP
354-7532 AIR COMPRESSOR GP
354-7532 AIR COMPRESSOR GP
PART OF 4P-1912 AIR COMPRESSOR GP
AIR COMPRESSOR GP
4P-0676 AIR COMPRESSOR GP
4P-0676 AIR COMPRESSOR GP
PART OF 354-7532 AIR COMPRESSOR GP
AIR COMPRESSOR GP
4P-1911 AIR COMPRESSOR GP
4P-1911 AIR COMPRESSOR GP
S/N 2EK1-1802
16 CFM, DRIVE RATIO 1:1
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
4P-1912 AIR COMPRESSOR GP
4P-1912 AIR COMPRESSOR GP
13 CFM, DRIVE RATIO 1:1
AIR COMPRESSOR GP
4W-6425 AIR COMPRESSOR GP
4W-6425 AIR COMPRESSOR GP
PART OF 4W-6667 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
4W-6667 AIR COMPRESSOR GP
4W-6667 AIR COMPRESSOR GP
S/N 2EK1-601
13 CFM
FOR USE WITH @@@@@ 2W-9998@@@@@
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
7E-1428 AIR COMPRESSOR GP
7E-1428 AIR COMPRESSOR GP
16 CFM. GEAR DRIVEN
FOR USE WITH @@@@@ 4W-3123@@@@@, @@@@@ 2W-9998@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
7E-7619 AIR COMPRESSOR GP
7E-7619 AIR COMPRESSOR GP
PART OF 4P-1911 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
7W-0023 AIR COMPRESSOR GP
7W-0023 AIR COMPRESSOR GP
31 CFM
FOR USE WITH @@@@@ 7C-1783@@@@@
CANNOT BE USED WITH PREMIUM INSTRUMENT PANEL OR FACTORY INSTALLED WATER CONDITIONER
AN ATTACHMENT
AIR COMPRESSOR GP
7W-4020 AIR COMPRESSOR GP
7W-4020 AIR COMPRESSOR GP
PART OF 7W-0023 AIR COMPRESSOR GP
AN ATTACHMENT
AIR COMPRESSOR GP
9Y-2240 AIR COMPRESSOR GP
9Y-2240 AIR COMPRESSOR GP
16 CFM, GEAR DRIVEN
PART OF 7E-1428 AIR COMPRESSOR GP
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
2W-9998 LINES GP-AIR COMPRESSOR
2W-9998 LINES GP-AIR COMPRESSOR
FOR USE WITH AIR COMPRESSOR
LINES GP-AIR COMPRESSOR
7C-1783 LINES GP-AIR COMPRESSOR
7C-1783 LINES GP-AIR COMPRESSOR
FOR USE WITH @@@@@ 7W-0023@@@@@
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
7C-7246 LINES GP-AIR COMPRESSOR
7C-7246 LINES GP-AIR COMPRESSOR
FOR USE WITH NON-BOOSTED AIR TO SUPPLY THE COMPRESSOR
AN ATTACHMENT
BELT TIGHTENER GP
BELT TIGHTENER GP
7C-4592 BELT TIGHTENER GP
7C-4592 BELT TIGHTENER GP
4 GROOVE-6 INCH DIAMETER IDLER PULLEY
AN ATTACHMENT
BELT TIGHTENER GP
9N-2112 BELT TIGHTENER GP
9N-2112 BELT TIGHTENER GP
4 GROOVE-6 INCH DIAMETER IDLER PULLEY
AN ATTACHMENT
FASTENER GP-BELT TIGHTENER
9Y-3650 FASTENER GP-BELT TIGHTENER
9Y-3650 FASTENER GP-BELT TIGHTENER
S/N 2EK1-1867
ALSO AN ATTACHMENT
ENGINE BRAKE GP
BRAKESAVER GP
9N-1852 BRAKESAVER GP
9N-1852 BRAKESAVER GP
CONTROL GP-BRAKESAVER
9N-0572 CONTROL GP-BRAKESAVER
9N-0572 CONTROL GP-BRAKESAVER
AUTOMATIC
AN ATTACHMENT
148-7422 ENGINE BRAKE GP
148-7422 ENGINE BRAKE GP
24 VOLTS
FIELD INSTALLATION
148-7440 ENGINE BRAKE GP
148-7440 ENGINE BRAKE GP
12 VOLTS
FIELD INSTALLATION
ENGINE BRAKE GP
7W-7565 ENGINE BRAKE GP
7W-7565 ENGINE BRAKE GP
FASTENER GP-BRAKESAVER
9N-2059 FASTENER GP-BRAKESAVER
9N-2059 FASTENER GP-BRAKESAVER
S/N 2EK1-1930
HOUSING GP-ENGINE BRAKE
115-2372 HOUSING GP-ENGINE BRAKE
115-2372 HOUSING GP-ENGINE BRAKE
FRONT
PART OF 148-7422 ENGINE BRAKE GP
HOUSING GP-ENGINE BRAKE
115-2373 HOUSING GP-ENGINE BRAKE
115-2373 HOUSING GP-ENGINE BRAKE
REAR
PART OF 148-7422 ENGINE BRAKE GP
HOUSING GP-ENGINE BRAKE
4P-2142 HOUSING GP-ENGINE BRAKE
4P-2142 HOUSING GP-ENGINE BRAKE
S/N 2EK1-1853
12 VOLT. FRONT
PART OF 148-7440, 7W-7565 ENGINE BRAKE GP
HOUSING GP-ENGINE BRAKE
4P-2143 HOUSING GP-ENGINE BRAKE
4P-2143 HOUSING GP-ENGINE BRAKE
S/N 2EK1-1853
12 VOLT. REAR
PART OF 148-7440, 7W-7565 ENGINE BRAKE GP
143-6479 KIT-ENGINE BRAKE
143-6479 KIT-ENGINE BRAKE
FIELD INSTALLATION
148-7443 SPACER GP-ENGINE BRAKE
148-7443 SPACER GP-ENGINE BRAKE
PART OF 148-7422, 148-7440 ENGINE BRAKE GP
VALVE AS-RETARDER
1S-3998 VALVE AS-RETARDER
1S-3998 VALVE AS-RETARDER
PART OF 9N-0572 CONTROL GP-BRAKESAVER
AN ATTACHMENT
VALVE GP-BRAKESAVER CONTROL
9N-3687 VALVE GP-BRAKESAVER CONTROL
9N-3687 VALVE GP-BRAKESAVER CONTROL
S/N 2EK1-1930
VALVE GP-BRAKESAVER CONTROL
9Y-7116 VALVE GP-BRAKESAVER CONTROL
9Y-7116 VALVE GP-BRAKESAVER CONTROL
PART OF 9N-3687 VALVE GP-BRAKESAVER CONTROL
VALVE GP-CHECK
5D-3056 VALVE GP-CHECK
5D-3056 VALVE GP-CHECK
PART OF 9N-0572 CONTROL GP-BRAKESAVER
AN ATTACHMENT
148-7503 HARNESS GP-ENGINE BRAKE
148-7503 HARNESS GP-ENGINE BRAKE
FOR USE WITH COMRESSION BRAKE
FIELD INSTALLATION
143-6712 SWITCH GP-ENGINE BRAKE
143-6712 SWITCH GP-ENGINE BRAKE
FUEL PUMP (EXTERNAL)
FIELD INSTALLATION
158-4565 SWITCH GP-ENGINE BRAKE
158-4565 SWITCH GP-ENGINE BRAKE -CLUTCH
FOR USE WITH COMPRESSION BRAKE
FIELD INSTALLATION
CAMSHAFT GP
CAMSHAFT GP
7W-3798 CAMSHAFT GP
7W-3798 CAMSHAFT GP -SINGLE
COMPRESSOR GP-REFRIGERANT
MOUNTING GP-ALTERNATOR & COMPR
4W-4836 MOUNTING GP-ALTERNATOR & COMPR
4W-4836 MOUNTING GP-ALTERNATOR & COMPR
FOR USE WITH ROTARY TYPE REFRIGERANT COMPRESSOR
ALSO AN ATTACHMENT
MOUNTING GP-REFRIGERANT COMPR
4W-5659 MOUNTING GP-REFRIGERANT COMPR
4W-5659 MOUNTING GP-REFRIGERANT COMPR
RH FRONT SIDE MOUNTING
FOR USE WITH ROTARY REFRIGERANT COMPRESSOR
AN ATTACHMENT
MOUNTING GP-REFRIGERANT COMPR
7C-5615 MOUNTING GP-REFRIGERANT COMPR
7C-5615 MOUNTING GP-REFRIGERANT COMPR
S/N 2EK1-1602
FOR USE WITH PISTON TYPE REFRIGERANT COMPRESSOR
ALSO AN ATTACHMENT
MOUNTING GP-REFRIGERANT COMPR
9N-5033 MOUNTING GP-REFRIGERANT COMPR
9N-5033 MOUNTING GP-REFRIGERANT COMPR
FOR USE WITH CENTER MOUNTED FAN DRIVE & SLANT ENGINE ARRANGEMENTS, REQUIRING OFFSET FAN DRIVE;PROVIDES HARDWARE FOR ALTERNATOR
AN ATTACHMENT
MOUNTING GP-REFRIGERANT COMPR
9N-6417 MOUNTING GP-REFRIGERANT COMPR
9N-6417 MOUNTING GP-REFRIGERANT COMPR
S/N 2EK1-1867
FOR USE WITH CENTER MOUNTED FAN DRIVE & SLANT ENGINE ARRANGEMENTS, REQUIRING OFFSET FAN DRIVE; PROVIDES HARDWARE FOR ALTERNATOR MTG
ALSO AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
4P-1887 CRANKSHAFT GP
4P-1887 CRANKSHAFT GP
S/N 2EK1-1919
CRANKSHAFT GP
4P-1887 CRANKSHAFT GP
4P-1887 CRANKSHAFT GP
S/N 2EK512-4045
CRANKSHAFT GP
9Y-8582 CRANKSHAFT GP
9Y-8582 CRANKSHAFT GP
S/N 2EK1-1930
243-6718 KIT-CRANKSHAFT BEARING
243-6718 KIT-CRANKSHAFT BEARING
FIELD INSTALLATION
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
9N-3867 COVER GP-CYLINDER BLOCK
9N-3867 COVER GP-CYLINDER BLOCK
S/N 2EK1-999
COVER GP-CYLINDER BLOCK
9N-3867 COVER GP-CYLINDER BLOCK
9N-3867 COVER GP-CYLINDER BLOCK
S/N 2EK1000-4045
CYLINDER BLOCK GP
4P-3720 CYLINDER BLOCK GP
4P-3720 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 7E-4697@@@@@, @@@@@ 8N-9267@@@@@
FIELD INSTALLATION
CYLINDER BLOCK GP
7E-4697 CYLINDER BLOCK GP
7E-4697 CYLINDER BLOCK GP
S/N 2EK1-14444
FIELD REPLACEMENT ORDER 6- 7E-3632 JET AS-PISTON COOLING, 6-111-8606 BOLT-SPECIAL
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER 6-111-8606 BOLT-SPECIAL, 6-290-6567 TUBE AS-OIL JET
CYLINDER HEAD GP
CYLINDER HEAD AS
7W-0007 CYLINDER HEAD AS
7W-0007 CYLINDER HEAD AS
PART OF 7E-0970, 7W-2203 CYLINDER HEAD GP
ALSO AN ATTACHMENT
CYLINDER HEAD AS
9Y-3775 CYLINDER HEAD AS
9Y-3775 CYLINDER HEAD AS
PART OF 7E-0970 CYLINDER HEAD GP
AN ATTACHMENT
CYLINDER HEAD GP
110-5096 CYLINDER HEAD GP
110-5096 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@110-5099@@@@@
CYLINDER HEAD GP
110-5099 CYLINDER HEAD GP
110-5099 CYLINDER HEAD GP
PART OF 110-5096, 7E-0970 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@110-5096@@@@@
AN ATTACHMENT
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
7C-0041 CYLINDER HEAD GP
7C-0041 CYLINDER HEAD GP
CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
PART OF 7E-3706 CYLINDER HEAD GP
Type 1
AN ATTACHMENT
CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
PART OF 7E-3706 CYLINDER HEAD GP
Type 2
AN ATTACHMENT
CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
PART OF 7E-3706 CYLINDER HEAD GP
Type 3
AN ATTACHMENT
CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
Type 1
FOR USE WITH ATAAC ENGINES ONLY
AN ATTACHMENT
CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
Type 2
FOR USE WITH ATAAC ENGINES ONLY
AN ATTACHMENT
CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
Type 3
FOR USE WITH ATAAC ENGINES ONLY
AN ATTACHMENT
CYLINDER HEAD GP
7E-9580 CYLINDER HEAD GP
7E-9580 CYLINDER HEAD GP
S/N 2EK1-1930
CYLINDER HEAD GP
7E-9908 CYLINDER HEAD GP
7E-9908 CYLINDER HEAD GP
S/N 2EK1-1767
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
PART OF 4W-2436, 7C-0041, 7E-9580, 7E-9908 CYLINDER HEAD GP
DAMPER GP
DAMPER & PULLEY GP
4P-2515 DAMPER & PULLEY GP
4P-2515 DAMPER & PULLEY GP
S/N 2EK1-1769
7.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-2516 DAMPER & PULLEY GP
4P-2516 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2517 DAMPER & PULLEY GP
4P-2517 DAMPER & PULLEY GP
S/N 2EK1-1602
10.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-2518 DAMPER & PULLEY GP
4P-2518 DAMPER & PULLEY GP
8.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2519 DAMPER & PULLEY GP
4P-2519 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
S/N 2EK1-511
7.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
S/N 2EK512-UP
7.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
S/N 2EK1-511
8.5 IN DIA PULLEY
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
S/N 2EK512-1960
8.5 IN DIA PULLEY
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
9.5 INCH DIAMETER
Type 1
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
9.5 INCH DIAMETER
Type 2
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
S/N 2EK1-511
10.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
S/N 2EK512-UP
10.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
S/N 2EK1-511
8.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
S/N 2EK512-UP
8.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
S/N 2EK1-447
9.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-7491 DAMPER & PULLEY GP
4P-7491 DAMPER & PULLEY GP
S/N 2EK1-4045
9.5 INCH DIAMETER
DAMPER & PULLEY GP
9Y-8712 DAMPER & PULLEY GP
9Y-8712 DAMPER & PULLEY GP
S/N 2EK1-1930
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
4W-3123 DRIVE GP-ACCESSORY
4W-3123 DRIVE GP-ACCESSORY
AIR COMPRESSOR
DRIVE GP-ACCESSORY
7C-0941 DRIVE GP-ACCESSORY
7C-0941 DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
8N-9653 DRIVE GP-ACCESSORY
8N-9653 DRIVE GP-ACCESSORY
DRIVE GP-FAN
DRIVE GP-FAN
7E-3714 DRIVE GP-FAN
7E-3714 DRIVE GP-FAN
PROVIDES 13.44 INCH FAN MOUNTING HEIGHT
FOR USE WITH ATAAC ENGINE WITH 9.5 INCH DIAMETER CRANK PULLEY
AN ATTACHMENT
DRIVE GP-FAN
7W-0628 DRIVE GP-FAN
7W-0628 DRIVE GP-FAN
PROVIDES FAN ADAPTER WITH 2 INCH DIAMETER X .22 INCH LONG PILOT AND, 3.5 INCH DIAMETER BOLT CIRCLE
AN ATTACHMENT
DRIVE GP-FAN
9N-2113 DRIVE GP-FAN
9N-2113 DRIVE GP-FAN
PROVIDES FAN ADAPTER WITH 2 INCH DIA X 1.14 INCH LONG PILOT, AND 4.5 INCH DIA BOLT CIRCLE
AN ATTACHMENT
DRIVE GP-FAN
9N-2117 DRIVE GP-FAN
9N-2117 DRIVE GP-FAN
PROVIDES FAN ADAPTER WITH 2 INCH DIA X 1.14 INCH LONG PILOT AND 3.5 INCH DIA BOLT CIRCLE
FOR USE WITH ROTOR TYPE COMPRESSOR
CANNOT BE USED WITH PISTON TYPE COMPRESSOR
AN ATTACHMENT
DRIVE GP-FAN
9N-2349 DRIVE GP-FAN
9N-2349 DRIVE GP-FAN
PROVIDES FAN ADAPTER WITH 2.5 INCH DIA X .79 INCH LONG PILOT WITH 4.5 INCH BOLT DIA CIRCLE
FOR USE WITH ROTOR TYPE COMPRESSOR, ALTERNATOR MOUNTING GPS
CANNOT BE USED WITH PISTON TYPE COMPRESSOR
AN ATTACHMENT
FASTENER GP-FAN DRIVE
7W-9005 FASTENER GP-FAN DRIVE
7W-9005 FASTENER GP-FAN DRIVE
S/N 2EK1-1602
DRIVE GP-PUMP
DRIVE GP-PUMP
1W-7935 DRIVE GP-PUMP
1W-7935 DRIVE GP-PUMP
1:1 DRIVE RATIO WITH COUNTERCLOCKWISE ROTATION. MOUNTS LEFT SIDE FRONT-HYDRAULIC PUMP. BRAKE OIL CIRCULATION
ALSO AN ATTACHMENT
FLYWHEEL GP
ADAPTER GP-FLYWHEEL
6N-9829 ADAPTER GP-FLYWHEEL
6N-9829 ADAPTER GP-FLYWHEEL
CANNOT BE USED WITH BRAKESAVER ENGINE
AN ATTACHMENT
FLYWHEEL GP
4P-3740 FLYWHEEL GP
4P-3740 FLYWHEEL GP
FOR USE WITH SPICER 15.5 INCH, 7 SPRING CLUTCH
AN ATTACHMENT
FLYWHEEL GP
4P-4795 FLYWHEEL GP
4P-4795 FLYWHEEL GP
REQUIRES BRAKESAVER
FOR USE WITH SPICER 15.5 INCH, 7 SPRING CLUTCH
AN ATTACHMENT
FLYWHEEL GP
4P-8170 FLYWHEEL GP
4P-8170 FLYWHEEL GP
FOR USE WITH 17 INCH SINGLE-PLATE DIAPHRAGM SPRING CLUTCH
AN ATTACHMENT
FLYWHEEL GP
4W-7370 FLYWHEEL GP
4W-7370 FLYWHEEL GP
FOR USE WITH A SPICER 10 SPRING DAMPENED DISK CLUTCH
CANNOT BE USED WITH BRAKESAVER ENGINES
AN ATTACHMENT
FLYWHEEL GP
6N-1299 FLYWHEEL GP
6N-1299 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING AND BRAKESAVER ENGINES
AN ATTACHMENT
FLYWHEEL GP
9N-0018 FLYWHEEL GP
9N-0018 FLYWHEEL GP
S/N 2EK1-1321
FOR USE WITH 14 INCH TWO PLATE CLUTCH & SAE NO. 1 FLYWHEEL HOUSING
FLYWHEEL GP
9N-0676 FLYWHEEL GP
9N-0676 FLYWHEEL GP
FOR USE WITH 15.5 INCH TWO PLATE CLUTCH & SAE NO. 1 FLYWHEEL HOUSING
ALSO AN ATTACHMENT
FLYWHEEL GP
9N-0678 FLYWHEEL GP
9N-0678 FLYWHEEL GP
S/N 2EK1-1930
FOR USE WITH 14 INCH CLUTCH
GEAR GP
GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
HOUSING GP-FRONT
9Y-1579 HOUSING GP-FRONT
9Y-1579 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
9N-3889 COVER GP-FLYWHEEL HOUSING
9N-3889 COVER GP-FLYWHEEL HOUSING
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
HOUSING GP-FLYWHEEL
9N-2086 HOUSING GP-FLYWHEEL
9N-2086 HOUSING GP-FLYWHEEL
S/N 2EK1-923
PERMITS BOTH ZERO DEGREE AND 7.5 DEGREE ENGINE INSTALLATION ANGLES
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
9N-2086 HOUSING GP-FLYWHEEL
9N-2086 HOUSING GP-FLYWHEEL
PERMITS BOTH ZERO DEGREE AND 7.5 DEGREE ENGINE INSTALLATION ANGLES
AN ATTACHMENT
HOUSING GP-FLYWHEEL
9N-2184 HOUSING GP-FLYWHEEL
9N-2184 HOUSING GP-FLYWHEEL
S/N 2EK1-4045
HOUSING GP-FLYWHEEL
9N-3887 HOUSING GP-FLYWHEEL
9N-3887 HOUSING GP-FLYWHEEL
S/N 2EK1-921
HOUSING GP-FLYWHEEL
9N-3887 HOUSING GP-FLYWHEEL
9N-3887 HOUSING GP-FLYWHEEL
S/N 2EK922-1960
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
4P-0281 COVER GP-FRONT HOUSING
4P-0281 COVER GP-FRONT HOUSING
S/N 2EK1-1753
COVER GP-FRONT HOUSING
7C-1156 COVER GP-FRONT HOUSING
7C-1156 COVER GP-FRONT HOUSING
PROVIDES AN AUXILLARY DRIVE COVER WHEN AIR COMPRESSOR IS NOT REQUIRED
AN ATTACHMENT
COVER GP-FRONT HOUSING
7C-9018 COVER GP-FRONT HOUSING
7C-9018 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
7E-4835 COVER GP-FRONT HOUSING
7E-4835 COVER GP-FRONT HOUSING
S/N 2EK1-1362
COVER GP-FRONT HOUSING
7E-4835 COVER GP-FRONT HOUSING
7E-4835 COVER GP-FRONT HOUSING
S/N 2EK1363-4045
COVER GP-FRONT HOUSING
7W-8786 COVER GP-FRONT HOUSING
7W-8786 COVER GP-FRONT HOUSING
S/N 2EK1-1362
PEEC
COVER GP-FRONT HOUSING
7W-8786 COVER GP-FRONT HOUSING
7W-8786 COVER GP-FRONT HOUSING
S/N 2EK1363-1960
PEEC
COVER GP-FRONT HOUSING
7W-8787 COVER GP-FRONT HOUSING
7W-8787 COVER GP-FRONT HOUSING
S/N 2EK1-1362
PEEC
COVER GP-FRONT HOUSING
7W-8787 COVER GP-FRONT HOUSING
7W-8787 COVER GP-FRONT HOUSING
S/N 2EK1363-1602
PEEC
FASTENER GP-FRONT HOUSING
4N-6006 FASTENER GP-FRONT HOUSING
4N-6006 FASTENER GP-FRONT HOUSING
GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
HOUSING GP-FRONT
9Y-1579 HOUSING GP-FRONT
9Y-1579 HOUSING GP-FRONT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
9N-0073 LIFTING GP-ENGINE
9N-0073 LIFTING GP-ENGINE
LIFTING GP-ENGINE
9N-6407 LIFTING GP-ENGINE
9N-6407 LIFTING GP-ENGINE
ALSO AN ATTACHMENT
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
7E-2175 MOUNTING GP-ALTERNATOR
7E-2175 MOUNTING GP-ALTERNATOR
RH
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
9N-0449 MOUNTING GP-ALTERNATOR
9N-0449 MOUNTING GP-ALTERNATOR
CANNOT BE USED WITH BELT TIGHTENER OR BELT TIGHTENER FASTENER
ALSO AN ATTACHMENT
MOUNTING GP-ALTERNATOR
9N-3399 MOUNTING GP-ALTERNATOR
9N-3399 MOUNTING GP-ALTERNATOR
S/N 2EK1-4045
CANNOT BE USED WITH BELT TIGHTENER OR BELT TIGHTENER FASTENER
PAN GP-OIL
PAN GP-OIL
7C-4029 PAN GP-OIL
7C-4029 PAN GP-OIL -ENGINE
S/N 2EK1-179
PAN GP-OIL
7C-4029 PAN GP-OIL
7C-4029 PAN GP-OIL -ENGINE
S/N 2EK180-UP
PAN GP-OIL
7W-4460 PAN GP-OIL
7W-4460 PAN GP-OIL -ENGINE
S/N 2EK1-179
SETBACK
ALSO AN ATTACHMENT
PAN GP-OIL
7W-4460 PAN GP-OIL
7W-4460 PAN GP-OIL -ENGINE
S/N 2EK180-UP
SETBACK
ALSO AN ATTACHMENT
PAN GP-OIL
9N-0664 PAN GP-OIL
9N-0664 PAN GP-OIL
S/N 2EK1-179
PAN GP-OIL
9N-0664 PAN GP-OIL
9N-0664 PAN GP-OIL
S/N 2EK180-1930
PAN GP-OIL
9Y-5590 PAN GP-OIL
9Y-5590 PAN GP-OIL -ENGINE
S/N 2EK1-179
PAN GP-OIL
9Y-5590 PAN GP-OIL
9Y-5590 PAN GP-OIL -ENGINE
S/N 2EK180-1458
PISTON & ROD GP
KIT-PISTON
203-4837 KIT-PISTON
203-4837 KIT-PISTON
S/N 2EK513-UP
15.2:1 COMPRESSION RATIO
FIELD INSTALLATION
PISTON & ROD GP
7E-0491 PISTON & ROD GP
7E-0491 PISTON & ROD GP
S/N 2EK1-1930
14.5:1 RATIO
PISTON & ROD GP
7E-8657 PISTON & ROD GP
7E-8657 PISTON & ROD GP
S/N 2EK1-512
15.6:1 RATIO
PISTON & ROD GP
7E-8657 PISTON & ROD GP
7E-8657 PISTON & ROD GP
S/N 2EK513-1853
15.6:1 RATIO
PISTON & ROD GP
7E-8701 PISTON & ROD GP
7E-8701 PISTON & ROD GP
S/N 2EK1-512
15.2:1 RATIO
PISTON & ROD GP
7E-8701 PISTON & ROD GP
7E-8701 PISTON & ROD GP
S/N 2EK513-4045
15.2:1 RATIO
PULLEY GP
DAMPER & PULLEY GP
4P-2515 DAMPER & PULLEY GP
4P-2515 DAMPER & PULLEY GP
S/N 2EK1-1769
7.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-2516 DAMPER & PULLEY GP
4P-2516 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2517 DAMPER & PULLEY GP
4P-2517 DAMPER & PULLEY GP
S/N 2EK1-1602
10.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-2518 DAMPER & PULLEY GP
4P-2518 DAMPER & PULLEY GP
8.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2519 DAMPER & PULLEY GP
4P-2519 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
S/N 2EK1-511
7.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
S/N 2EK512-UP
7.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
S/N 2EK1-511
8.5 IN DIA PULLEY
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
S/N 2EK512-1960
8.5 IN DIA PULLEY
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
9.5 INCH DIAMETER
Type 1
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
9.5 INCH DIAMETER
Type 2
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
S/N 2EK1-511
10.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
S/N 2EK512-UP
10.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
S/N 2EK1-511
8.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
S/N 2EK512-UP
8.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
S/N 2EK1-447
9.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-7491 DAMPER & PULLEY GP
4P-7491 DAMPER & PULLEY GP
S/N 2EK1-4045
9.5 INCH DIAMETER
DAMPER & PULLEY GP
9Y-8712 DAMPER & PULLEY GP
9Y-8712 DAMPER & PULLEY GP
S/N 2EK1-1930
SUPPRESSION GP-SOUND
PANEL GP-SOUND SUPPRESSION
119-4691 PANEL GP-SOUND SUPPRESSION
119-4691 PANEL GP-SOUND SUPPRESSION -OIL PAN
SET BACK OIL PAN, FRONT SUMP
CANNOT BE USED WITH BRAKESAVER
AN ATTACHMENT
PANEL GP-SOUND SUPPRESSION
1W-2415 PANEL GP-SOUND SUPPRESSION
1W-2415 PANEL GP-SOUND SUPPRESSION
S/N 2EK1-1602
RH
ALSO AN ATTACHMENT
PANEL GP-SOUND SUPPRESSION
2W-0404 PANEL GP-SOUND SUPPRESSION
2W-0404 PANEL GP-SOUND SUPPRESSION
S/N 2EK1-1916
LH
ALSO AN ATTACHMENT
PANEL GP-SOUND SUPPRESSION
7W-8832 PANEL GP-SOUND SUPPRESSION
7W-8832 PANEL GP-SOUND SUPPRESSION
CANNOT BE USED WITH OIL PAN OR BRAKESAVER ENGINES
ALSO AN ATTACHMENT
PANEL GP-SOUND SUPPRESSION
9N-2243 PANEL GP-SOUND SUPPRESSION
9N-2243 PANEL GP-SOUND SUPPRESSION -ENGINE
S/N 2EK1-1930
SOUND SUPPRESSION-SUMP SECTION
FOR USE WITH BRAKESAVER REAR SUMP
ALSO AN ATTACHMENT
PANEL GP-SOUND SUPPRESSION
9N-2579 PANEL GP-SOUND SUPPRESSION
9N-2579 PANEL GP-SOUND SUPPRESSION -ENGINE
S/N 2EK1-1930
SOUND SUPPRESSION-SHALLOW SECTION
FOR USE WITH BRAKESAVER-REAR SUMP
ALSO AN ATTACHMENT
PANEL GP-SOUND SUPPRESSION
9Y-5297 PANEL GP-SOUND SUPPRESSION
9Y-5297 PANEL GP-SOUND SUPPRESSION
FOR USE WITH STANDARD OIL PAN WITH SOUND PLATE
AN ATTACHMENT
SERPENTINE/V-BELTS
4P-1667 V-BELT SET
4P-1667 V-BELT SET
1524 MM (60 IN) LG
AN ATTACHMENT
7N-3949 V-BELT SET
7N-3949 V-BELT SET
1359MM (53.5IN) LG
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
4N-2272 COVER GP-VALVE MECHANISM
4N-2272 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7C-0036 COVER GP-VALVE MECHANISM
7C-0036 COVER GP-VALVE MECHANISM
OIL FILL IN THIRD POSITION
FOR USE WITH JAKE BRAKE
AN ATTACHMENT
COVER GP-VALVE MECHANISM
7C-0730 COVER GP-VALVE MECHANISM
7C-0730 COVER GP-VALVE MECHANISM
S/N 2EK1-1769
COVER GP-VALVE MECHANISM
7E-1532 COVER GP-VALVE MECHANISM
7E-1532 COVER GP-VALVE MECHANISM
OIL FILL IN SECOND POSITION
FOR USE WITH JAKE BRAKE
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
7N-4467 COVER GP-VALVE MECHANISM
7N-4467 COVER GP-VALVE MECHANISM
S/N 2EK1-202
COVER GP-VALVE MECHANISM
9N-2093 COVER GP-VALVE MECHANISM
9N-2093 COVER GP-VALVE MECHANISM
S/N 2EK1-1916
OIL FILL IN FIRST AND THIRD POSITION
CANNOT BE USED WITH JAKE BRAKE OR PACBRAKE
COVER GP-VALVE MECHANISM
9N-3618 COVER GP-VALVE MECHANISM
9N-3618 COVER GP-VALVE MECHANISM
FOR USE WITH REAR EXHAUST TURBO
COVER GP-VALVE MECHANISM
9N-3646 COVER GP-VALVE MECHANISM
9N-3646 COVER GP-VALVE MECHANISM
S/N 2EK1-4045
CANNOT BE USED WITH JAKE BRAKE OR PACBRAKE
COVER GP-VALVE MECHANISM
9Y-1664 COVER GP-VALVE MECHANISM
9Y-1664 COVER GP-VALVE MECHANISM
S/N 2EK1-1602
NO OIL FILL
FOR USE WITH JAKE BRAKE
COVER GP-VALVE MECHANISM
9Y-5294 COVER GP-VALVE MECHANISM
9Y-5294 COVER GP-VALVE MECHANISM
OIL FILL IN THIRD POSITION
FOR USE WITH JAKE BRAKE
ROCKER ARM GP
4N-1045 ROCKER ARM GP
4N-1045 ROCKER ARM GP
PART OF 4W-2461 VALVE MECHANISM GP
ROCKER ARM GP
7C-0032 ROCKER ARM GP
7C-0032 ROCKER ARM GP
PART OF 7C-0050 VALVE MECHANISM GP
VALVE MECHANISM GP
4W-2461 VALVE MECHANISM GP
4W-2461 VALVE MECHANISM GP -ENGINE
VALVE MECHANISM GP
7C-0050 VALVE MECHANISM GP
7C-0050 VALVE MECHANISM GP -ENGINE

Information:

(For parts list, see above)

General Service Information
Tu-Flo 300 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 400, 500, 1000 Compressors
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 501 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 600 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 700 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Truck Engine News
Smaller Connecting Rod Bolt Used In 4W6425 Air Compressor; Use Correct Torque
1991/05/01
3406 Truck Engine Component Update
1992/10/01
New Gasket Provides Improved Sealing Between Air Compressor And Drive{1803}
1994/09/01
124-5572 Air Pressure Relief Valve Available{1803}
1995/04/01
Cylinder Head Gasket Changed For Tu-Flo 550/750 Air Compressor Groups{1803}
1997/07/01
Special Instructions Are Now Available For Converting Four Cylinder Air Compressor Air Supply From Boosted To Naturally Aspirated, Eliminating Inlet Regulating Valve And Related Maintenance{1803}
1999/07/01
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Repair Guidelines for Air Compressors {1803}
2003/10/01
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Converting a Four Cylinder Air Compressor Air Supply From a Pressurized Air Supply to a Naturally Aspirated Air Supply{1803}
Converting a Four Cylinder Air Compressor Air Supply From a Pressurized Air Supply to a Naturally Aspirated Air Supply{1803}
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Technical Information Bulletin
Converting 4 Cylinder Air Compressor Air Supply From Boosted To Naturally Aspirated
Converting 4 Cylinder Air Compressor Air Supply From Boosted To Naturally Aspirated
Specifications
Alternator And Compressor Mounting Group
3406B (PEEC) DIESEL TRUCK ENGINE
Disassembly and Assembly
Air Compressor
3406B (PEEC) DIESEL TRUCK ENGINE
Air Compressor And Accessory Drive
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Smaller Connecting Rod Bolt Used In 4W6425 Air Compressor; Use Correct Torque{1803}
1991/05/27
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Specifications
Pulley Tightener Group
3406B (PEEC) DIESEL TRUCK ENGINE
Belt Tension Chart
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Truck Engine News
3406 Truck Engine Component Update
1992/10/01
New O-ring Seals In BrakeSaver Group{1155}
1996/08/23
Compression Brakes Should be Inspected Carefully During Repairs to the Cylinder Head and Valve Mechanism {1119}
2003/05/01
Special Instruction
Jake Brake Part Number Cross-Reference To Caterpillar Part Numbers{1119}
Jake Brake Part Number Cross-Reference To Caterpillar Part Numbers{1119}
Specifications
Jake Brake
3406B (PEEC) DIESEL TRUCK ENGINE
BrakeSaver Group
3406B (PEEC) DIESEL TRUCK ENGINE
BrakeSaver Control Valve
3406B (PEEC) DIESEL TRUCK ENGINE
BrakeSaver Fastener Group
3406B (PEEC) DIESEL TRUCK ENGINE
Disassembly and Assembly
Oil Cooler (BrakeSaver)
3406B (PEEC) DIESEL TRUCK ENGINE
Flywheel (BrakeSaver)
3406B (PEEC) DIESEL TRUCK ENGINE
BrakeSaver Control Valve
3406B (PEEC) DIESEL TRUCK ENGINE
BrakeSaver
3406B (PEEC) DIESEL TRUCK ENGINE
Oil Pan (BrakeSaver)
3406B (PEEC) DIESEL TRUCK ENGINE
Oil Pump (BrakeSaver)
3406B (PEEC) DIESEL TRUCK ENGINE
Jacobs Engine Brake
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Different Mounting Hole Locations In Ring Gear Plate Assembly And Rotor Assembly For BrakeSaver{1155}
1979/09/03
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
Truck Engine News
New 8T2998 Lubricant Available
1986/02/01
Camshaft Idler Gear Shaft/Bolts
1993/08/01
Camshaft Drive Gear Inspection
1993/10/01
New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01
Engine News
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Specifications
Camshaft
3406B (PEEC) DIESEL TRUCK ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Valve Lifters
3406B (PEEC) DIESEL TRUCK ENGINE
Camshaft
3406B (PEEC) DIESEL TRUCK ENGINE
Camshaft Bearings
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Camshaft Drive Gear Inspection{1212}
1993/10/25
Specifications
Alternator And Compressor Mounting Group
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Truck Engine News
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
Inspection Marks On Bearings
1982/05/19
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
Remanufactured Undersize Crankshafts Are Available
1984/04/04
Crankshaft Seal Usage On 3400 Series Truck Engines
1985/12/01
3406 Truck Engine Component Update
1992/10/01
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01
Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/01
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/27
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
A New Type of Main Bearing Is Now Used {1202, 1203}
2004/05/01
Inspection and/or Repair Procedure to Replace Crankshafts on Truck Engines {1202}
2009/10/29
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Specifications
Connecting Rod And Main Bearing Journals
3406B (PEEC) DIESEL TRUCK ENGINE
Main Bearing Journals
3406B (PEEC) DIESEL TRUCK ENGINE
Crankshaft
3406B (PEEC) DIESEL TRUCK ENGINE
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Vibration Damper And Pulley
3406B (PEEC) DIESEL TRUCK ENGINE
Crankshaft Main Bearings
3406B (PEEC) DIESEL TRUCK ENGINE
Crankshaft
3406B (PEEC) DIESEL TRUCK ENGINE
Crankshaft Front Seal And Wear Sleeve
3406B (PEEC) DIESEL TRUCK ENGINE
Crankshaft Rear Seal And Wear Sleeve
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Truck Engine News
Inspection Marks On Bearings
1982/05/19
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
New Liner Seat Insert Available
1983/08/31
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings
1985/11/01
New Cylinder Liner Available
1986/02/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
3406 Truck Engine Component Update
1992/10/01
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used and New Cylinder Liner Projection Measurement Method
1992/11/01
Cylinder Pack Puller Groups Improved
1992/12/01
Flywheel Housing to Cylinder Block Joint Improvements{1157,1201}
1994/01/01
New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/26
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/08/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation of the 3406B and 3406C Long Block Engines
Installation of the 3406B and 3406C Long Block Engines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Liner Flange Breakage
Liner Flange Breakage
Specifications
Idler Gear Shaft Pilot Bore
3406B (PEEC) DIESEL TRUCK ENGINE
Cylinder Block
3406B (PEEC) DIESEL TRUCK ENGINE
Cylinder Liners
3406B (PEEC) DIESEL TRUCK ENGINE
Cylinder Liner Projection
3406B (PEEC) DIESEL TRUCK ENGINE
Connecting Rod And Main Bearing Journals
3406B (PEEC) DIESEL TRUCK ENGINE
Main Bearing Journals
3406B (PEEC) DIESEL TRUCK ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Disassembly and Assembly
Spacer Plate
3406B (PEEC) DIESEL TRUCK ENGINE
Piston Cooling Tubes
3406B (PEEC) DIESEL TRUCK ENGINE
Camshaft Bearings
3406B (PEEC) DIESEL TRUCK ENGINE
Crankshaft Main Bearings
3406B (PEEC) DIESEL TRUCK ENGINE
Cylinder Liners
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Liner Seat Insert Available{1217}
1983/08/15
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Cylinder Block Groups Used{1201}
1984/10/01
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
New Cylinder Liner Available{1201}
1986/02/10
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
New Liner Seat Inserts Available{1217}
1992/11/09
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence{1124,1221,1216}
1992/11/16
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Truck Engine News
Separate Valve Stem Gauges Available
1982/06/23
Engine Valve Stem &quot;use Again &quot; Specifications
1983/03/02
New Liner Seat Insert Available
1983/08/31
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/11/07
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Improved Head Gasket Used; Service Tips
1990/02/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Liner Seat Inserts Available
1992/11/01
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used and New Cylinder Liner Projection Measurement Method
1992/11/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/22
New Water Seals Used in 3400 Head Assemblies{1124}
1994/08/30
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/01
Service Cylinder Head Assemblies Have Round Exhaust Ports{1100,1101}
1995/07/01
New And Reconditioned Valve Projection Specifications{1105}
1995/08/01
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/10/01
Reman Cylinder Head Kits Are Now Available {1100}
2001/02/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/01
Replace the Cylinder Head Water Seals in Precious Metal Overhaul Kits Available for Certain On-Highway Truck Engines {1100}
Replace the Cylinder Head Water Seals in Precious Metal Overhaul Kits Available for Certain On-Highway Truck Engines {1100}
Engine News
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Replacement Procedure:
Replacement Procedure:
Specifications
Intake Valve Timing
3406B (PEEC) DIESEL TRUCK ENGINE
Valves
3406B (PEEC) DIESEL TRUCK ENGINE
Cylinder Head
3406B (PEEC) DIESEL TRUCK ENGINE
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
DISCONTINUATION OF REMAN CYLINDER HEAD KITS 0R7744 &amp; 0R7745 FOR 3406B AND 3406C ENGINES
DISCONTINUATION OF REMAN CYLINDER HEAD KITS 0R7744 & 0R7745 FOR 3406B AND 3406C ENGINES
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Nozzles and Adapters
3406B (PEEC) DIESEL TRUCK ENGINE
Cylinder Head Assembly
3406B (PEEC) DIESEL TRUCK ENGINE
Valves
3406B (PEEC) DIESEL TRUCK ENGINE
Valve Seat Inserts
3406B (PEEC) DIESEL TRUCK ENGINE
Bridge Dowels
3406B (PEEC) DIESEL TRUCK ENGINE
Valve Guides
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence{1124,1221,1216}
1992/11/16
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04
Truck Engine News
3406 Truck Engine Component Update
1992/10/01
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/01
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/27
Specifications
Pulley And Damper Groups
3406B (PEEC) DIESEL TRUCK ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Vibration Damper And Pulley
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Specifications
Accessory Drive Group
3406B (PEEC) DIESEL TRUCK ENGINE
Disassembly and Assembly
Air Compressor And Accessory Drive
3406B (PEEC) DIESEL TRUCK ENGINE
Specifications
Accessory Drive Group
3406B (PEEC) DIESEL TRUCK ENGINE
Disassembly and Assembly
Fan Drive
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Truck Engine News
New Carrier Assembly Used In Governor And Fuel Pump Drive Groups
1992/06/01
Impeller Appearance On Remanufactured 3406 Water Pump{1364,1361}
1994/09/01
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Machining 3406 Engine Water Pumps With 9N-5034 Housing to Accept a 108-7930 Tapered Roller Bearing Assembly{1361}
Machining 3406 Engine Water Pumps With 9N-5034 Housing to Accept a 108-7930 Tapered Roller Bearing Assembly{1361}
Service Letter-NACD
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-Australia
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-CFEL
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-CSARL
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-Americas
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-Brazil
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-Truck/Ag/Marine
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Specifications
Governor And Fuel Pump Drive Group (Timing Advance Unit)
3406B (PEEC) DIESEL TRUCK ENGINE
Service Letter-China
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-Asia
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-APD
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Magazine
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Carrier Assembly Used In Governor And Fuel Pump Drive Groups {1288,1299}
1992/08/10
New Water Pump Groups Use Tapered Roller Bearing {1361}
1993/07/05
New Cast Iron Inlet Adapter And Impeller For Water Pumps {1361}
1993/07/05
Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Water Pump Groups Use Tapered Roller Bearing {1361}
1993/07/05
New Cast Iron Inlet Adapter And Impeller For Water Pumps {1361}
1993/07/05
Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Truck Engine News
No Gaskets Used With Aluminum Flywheel Housings
1991/10/01
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/10/01
Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
2007/12/01
Special Instruction
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Flywheel Housing
3406B (PEEC) DIESEL TRUCK ENGINE
Flywheel Housing Bore
3406B (PEEC) DIESEL TRUCK ENGINE
Flywheel Housing Runout
3406B (PEEC) DIESEL TRUCK ENGINE
Flywheel Runout
3406B (PEEC) DIESEL TRUCK ENGINE
Flywheel
3406B (PEEC) DIESEL TRUCK ENGINE
Flywheel Adapter Group
3406B (PEEC) DIESEL TRUCK ENGINE
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Service Letter-APD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Disassembly and Assembly
Flywheel
3406B (PEEC) DIESEL TRUCK ENGINE
Flywheel (BrakeSaver)
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Truck Engine News
New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01
Timing Procedure Aid -Alignment Of Timing Gear Marks On 3406 Engines{1206}
1997/01/27
Special Instruction
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Specifications
Idler Gear Shaft Pilot Bore
3406B (PEEC) DIESEL TRUCK ENGINE
Front (Timing) Gear Group
3406B (PEEC) DIESEL TRUCK ENGINE
Idler Gear Assembly<BR> 2W7455 Gear Assembly
3406B (PEEC) DIESEL TRUCK ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Timing Gear Cover
3406B (PEEC) DIESEL TRUCK ENGINE
Timing Gears and Plate
3406B (PEEC) DIESEL TRUCK ENGINE
Crankshaft Front Seal And Wear Sleeve
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Truck Engine News
No Gaskets Used With Aluminum Flywheel Housings
1991/10/01
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01
Flywheel Housing to Cylinder Block Joint Improvements{1157,1201}
1994/01/01
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/10/01
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Flywheel Housing
3406B (PEEC) DIESEL TRUCK ENGINE
Flywheel Housing Bore
3406B (PEEC) DIESEL TRUCK ENGINE
Flywheel Housing Runout
3406B (PEEC) DIESEL TRUCK ENGINE
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Flywheel Housing
3406B (PEEC) DIESEL TRUCK ENGINE
Crankshaft Rear Seal And Wear Sleeve
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Truck Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/10/01
Special Instruction
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Specifications
Front Housing And Covers
3406B (PEEC) DIESEL TRUCK ENGINE
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Timing Gear Cover
3406B (PEEC) DIESEL TRUCK ENGINE
Timing Gears and Plate
3406B (PEEC) DIESEL TRUCK ENGINE
Crankshaft Front Seal And Wear Sleeve
3406B (PEEC) DIESEL TRUCK ENGINE
Truck Engine News
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19
Inspection Marks On Bearings
1982/05/19
Separate Valve Stem Gauges Available
1982/06/23
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
Engine Valve Stem &quot;use Again &quot; Specifications
1983/03/02
Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/06/29
New Liner Seat Insert Available
1983/08/31
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings
1983/10/05
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings
1985/11/01
Crankshaft Seal Usage On 3400 Series Truck Engines
1985/12/01
New 8T2998 Lubricant Available
1986/02/01
New Cylinder Liner Available
1986/02/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Engine Timing Indicator Group Available
1986/07/01
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Plasma Top Piston Rings Replace Chrome Rings
1989/09/01
Improved Head Gasket Used; Service Tips
1990/02/01
New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01
Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) Systems
1992/04/01
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01
3406 Truck Engine Component Update
1992/10/01
Cylinder Pack Puller Groups Improved
1992/12/01
Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) And Electronic Systems
1993/04/01
Flywheel Housing to Cylinder Block Joint Improvements{1157,1201}
1994/01/01
New Piston Body Has Improved Bonding Between Iron Band And Aluminum Body{1214}
1994/01/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/22
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/01
Impeller Appearance On Remanufactured 3406 Water Pump{1364,1361}
1994/09/01
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01
New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/26
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
Replacement Procedure:
Replacement Procedure:
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
The Control Group (Personality Module) Needs To Be Replaced On Certain 3406B PEEC Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Magazine
Connecting Rod Changes And Replacement Information{1218}
1980/03/03
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Cylinder Block Groups Used{1201}
1984/10/01
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
New Cylinder Liner Available{1201}
1986/02/10
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Engine Coolant Can Be Recycled{1395}
1989/11/13
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans{1302}
1991/06/03
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Piston Pin Retainer Used{1225}
1991/10/14
Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) Systems{1900}
1992/04/20
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
New Liner Seat Inserts Available{1217}
1992/11/09
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence{1124,1221,1216}
1992/11/16
Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) And Electronic Systems{1900}
1993/04/12
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Improved Alternator Groups Now Available{1405}
1998/05/04
Specifications
Engine Front Support
3406B (PEEC) DIESEL TRUCK ENGINE
Disassembly and Assembly
Engine Front Support
3406B (PEEC) DIESEL TRUCK ENGINE
Truck Engine News
New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01
Service Letter-NACD
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
Service Letter-Australia
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
Service Letter-CFEL
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
Service Letter-Americas
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
Service Letter-Truck/Ag/Marine
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
Specifications
Oil Pan
3406B (PEEC) DIESEL TRUCK ENGINE
Service Letter-China
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
Service Letter-Asia
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
Service Letter-APD
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
A New Oil Level Needs To Be Calibrated And Installed In Certain 3406B And 3406C Electronically Controlled Engines Equipped With A Front-Sump Oil Pan
Disassembly and Assembly
Oil Pan
3406B (PEEC) DIESEL TRUCK ENGINE
Oil Pan (BrakeSaver)
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans{1302}
1991/06/03
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Disassembly and Assembly
Camshaft Bearings
3406B (PEEC) DIESEL TRUCK ENGINE
Connecting Rod Bearings
3406B (PEEC) DIESEL TRUCK ENGINE
Crankshaft Main Bearings
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Truck Engine News
Inspection Marks On Bearings
1982/05/19
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/06/29
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings
1983/10/05
Reuse Of Engine Bearings
1983/12/21
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings
1985/11/01
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/11/01
Plasma Top Piston Rings Replace Chrome Rings
1989/09/01
New Piston Pin Retainer Used
1991/10/01
Cylinder Pack Puller Groups Improved
1992/12/01
New Piston Body Has Improved Bonding Between Iron Band And Aluminum Body{1214}
1994/01/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
New Guidelines for Inspecting Pistons {1214}
2006/01/01
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/08/01
A New Connecting Rod Bearing is Available {1219, 1225}
2009/01/01
A New Connecting Rod Bearing is Available {1218, 1219, 1225}
2009/02/01
An Improved Top Piston Ring Is Now Used on Aluminum Pistons in Certain 3406, 3408, and 3412 Engines {1215}
2012/04/24
Engine News
Wider Connecting Rods Have More Bearing Area
1979/10/31
Connecting Rod Changes And Replacement Information
1980/03/12
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
3400 Series Engines{1215}
3400 Series Engines{1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Pistons And Rings
3406B (PEEC) DIESEL TRUCK ENGINE
Connecting Rods
3406B (PEEC) DIESEL TRUCK ENGINE
Connecting Rod And Main Bearing Journals
3406B (PEEC) DIESEL TRUCK ENGINE
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; WHEE
Disassembly and Assembly
Piston Cooling Tubes
3406B (PEEC) DIESEL TRUCK ENGINE
Connecting Rod Bearings
3406B (PEEC) DIESEL TRUCK ENGINE
Crankshaft Main Bearings
3406B (PEEC) DIESEL TRUCK ENGINE
Cylinder Liners
3406B (PEEC) DIESEL TRUCK ENGINE
Pistons And Connecting Rod Assemblies
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Connecting Rod Changes And Replacement Information{1218}
1980/03/03
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Pistons With Thicker Top Rings Must Be Used In Correct Applications {1214,1215}
1983/04/18
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Plasma Top Piston Rings Replace Chrome Rings{1215,1214}
1989/09/11
New Piston Pin Retainer Used{1225}
1991/10/14
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
New Piston Body Has Improved Bonding Between Iron Band And Aluminum Body{1214}
1994/02/07
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Truck Engine News
3406 Truck Engine Component Update
1992/10/01
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/01
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/27
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Pulley Tightener Group
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Truck Engine News
New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19
Separate Valve Stem Gauges Available
1982/06/23
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Cylinder Pack Puller Groups Improved
1992/12/01
Dynamometer Testing of Electronic Engines{1000}
1995/10/01
Engine News
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Truck Engine News
New 8T2998 Lubricant Available
1986/02/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Engine News
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States