AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3406B Truck Engine 3ZJ00001-16181 BASIC ENGINE Caterpillar SIS



TRUCK ENGINE 3406C TRUCK ENGINE 3ZJ
 3406B Truck Engine 3ZJ00001-16181 SEBP1958 3406C 3ZJ   (1990)

Parts group 3406C:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR GP
354-7532 AIR COMPRESSOR GP
354-7532 AIR COMPRESSOR GP
PART OF 4P-1912 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
4P-0676 AIR COMPRESSOR GP
4P-0676 AIR COMPRESSOR GP
PART OF 354-7532 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
4P-1911 AIR COMPRESSOR GP
4P-1911 AIR COMPRESSOR GP
16 CFM, DRIVE RATIO 1:1
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
4P-1912 AIR COMPRESSOR GP
4P-1912 AIR COMPRESSOR GP
13 CFM, DRIVE RATIO 1:1
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
4W-6425 AIR COMPRESSOR GP
4W-6425 AIR COMPRESSOR GP
PART OF 4W-6667 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
4W-6667 AIR COMPRESSOR GP
4W-6667 AIR COMPRESSOR GP
13 CFM
FOR USE WITH @@@@@ 2W-9998@@@@@
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
7E-1428 AIR COMPRESSOR GP
7E-1428 AIR COMPRESSOR GP
16 CFM. GEAR DRIVEN
FOR USE WITH @@@@@ 4W-3123@@@@@, @@@@@ 2W-9998@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
7E-7619 AIR COMPRESSOR GP
7E-7619 AIR COMPRESSOR GP
PART OF 4P-1911 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
7W-0023 AIR COMPRESSOR GP
7W-0023 AIR COMPRESSOR GP
31 CFM
FOR USE WITH @@@@@ 7C-1783@@@@@
CANNOT BE USED WITH PREMIUM INSTRUMENT PANEL OR FACTORY INSTALLED WATER CONDITIONER
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
7W-4020 AIR COMPRESSOR GP
7W-4020 AIR COMPRESSOR GP
PART OF 7W-0023 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
9Y-2240 AIR COMPRESSOR GP
9Y-2240 AIR COMPRESSOR GP
16 CFM, GEAR DRIVEN
PART OF 7E-1428 AIR COMPRESSOR GP
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
2W-9998 LINES GP-AIR COMPRESSOR
2W-9998 LINES GP-AIR COMPRESSOR
FOR USE WITH AIR COMPRESSOR
LINES GP-AIR COMPRESSOR
7C-1783 LINES GP-AIR COMPRESSOR
7C-1783 LINES GP-AIR COMPRESSOR
FOR USE WITH @@@@@ 7W-0023@@@@@
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
7C-7246 LINES GP-AIR COMPRESSOR
7C-7246 LINES GP-AIR COMPRESSOR
FOR USE WITH NON-BOOSTED AIR TO SUPPLY THE COMPRESSOR
ALSO AN ATTACHMENT
PIPE AS-AIR COMPRESSOR LINES
166-6339 PIPE AS-AIR COMPRESSOR LINES
166-6339 PIPE AS-AIR COMPRESSOR LINES
PROVIDES A 6.0 IN OD PIPE WITH A 1.0 IN OD NIPPLE, FOR FIELD CONVERTING THE TF-1400 AIR COMPRESSOR INLET AIR SUPPLY FROM TURBOCHARGED TO NATURALLY ASPIRATED
FIELD INSTALLATION
BELT TIGHTENER GP
BELT TIGHTENER GP
150-5021 BELT TIGHTENER GP
150-5021 BELT TIGHTENER GP
6-INCH (152MM) DIA V-GROOVE PULLEY
FOR USE WITH ALT MOUNTING & AIR INLET HEATER SYSTEM
AN ATTACHMENT
BELT TIGHTENER GP
150-5022 BELT TIGHTENER GP
150-5022 BELT TIGHTENER GP
6-INCH(152MM) V-GROOVE PULLEY
FOR USE WITH AIR INLET HEATER SYSTEM
CANNOT BE USED WITH ALT MOUNTING
AN ATTACHMENT
BELT TIGHTENER GP
7C-4592 BELT TIGHTENER GP
7C-4592 BELT TIGHTENER GP
4 GROOVE-6 INCH DIAMETER IDLER PULLEY
AN ATTACHMENT
BELT TIGHTENER GP
9N-2112 BELT TIGHTENER GP
9N-2112 BELT TIGHTENER GP
4 GROOVE-6 INCH DIAMETER IDLER PULLEY
AN ATTACHMENT
FASTENER GP-BELT TIGHTENER
150-5020 FASTENER GP-BELT TIGHTENER
150-5020 FASTENER GP-BELT TIGHTENER
FOR USE WITH AIR INLET HEATER SYSTEM
CANNOT BE USED WITH ALTERNATOR MOUNTING BRACKETS
AN ATTACHMENT
FASTENER GP-BELT TIGHTENER
150-5025 FASTENER GP-BELT TIGHTENER
150-5025 FASTENER GP-BELT TIGHTENER
FOR USE WITH BELT TIGHTENER, ALTERNATOR MOUNTING BRACKET & AIR INLET HEATER SYSTEM
AN ATTACHMENT
FASTENER GP-BELT TIGHTENER
9Y-3650 FASTENER GP-BELT TIGHTENER
9Y-3650 FASTENER GP-BELT TIGHTENER
ALSO AN ATTACHMENT
ENGINE BRAKE GP
BRAKESAVER GP
9N-1852 BRAKESAVER GP
9N-1852 BRAKESAVER GP
CONTROL GP-BRAKESAVER
9N-0572 CONTROL GP-BRAKESAVER
9N-0572 CONTROL GP-BRAKESAVER
AUTOMATIC
AN ATTACHMENT
148-7422 ENGINE BRAKE GP
148-7422 ENGINE BRAKE GP
24 VOLTS
FIELD INSTALLATION
148-7430 ENGINE BRAKE GP
148-7430 ENGINE BRAKE GP
12 VOLT
FIELD INSTALLATION
148-7440 ENGINE BRAKE GP
148-7440 ENGINE BRAKE GP
12 VOLTS
FIELD INSTALLATION
ENGINE BRAKE GP
7W-7565 ENGINE BRAKE GP
7W-7565 ENGINE BRAKE GP
FASTENER GP-BRAKESAVER
9N-2059 FASTENER GP-BRAKESAVER
9N-2059 FASTENER GP-BRAKESAVER
HOUSING GP-ENGINE BRAKE
115-2372 HOUSING GP-ENGINE BRAKE
115-2372 HOUSING GP-ENGINE BRAKE
FRONT
PART OF 148-7422 ENGINE BRAKE GP
HOUSING GP-ENGINE BRAKE
115-2373 HOUSING GP-ENGINE BRAKE
115-2373 HOUSING GP-ENGINE BRAKE
REAR
PART OF 148-7422 ENGINE BRAKE GP
HOUSING GP-ENGINE BRAKE
4P-2142 HOUSING GP-ENGINE BRAKE
4P-2142 HOUSING GP-ENGINE BRAKE
12 VOLT. FRONT
PART OF 148-7440, 7W-7565 ENGINE BRAKE GP
HOUSING GP-ENGINE BRAKE
4P-2143 HOUSING GP-ENGINE BRAKE
4P-2143 HOUSING GP-ENGINE BRAKE
12 VOLT. REAR
PART OF 148-7440, 7W-7565 ENGINE BRAKE GP
143-6622 KIT-BRAKE
143-6622 KIT-BRAKE -ENGINE
FIELD INSTALLATION
143-6479 KIT-ENGINE BRAKE
143-6479 KIT-ENGINE BRAKE
FIELD INSTALLATION
154-7029 KIT-ENGINE BRAKE
154-7029 KIT-ENGINE BRAKE
FIELD INSTALLATION
148-7426 POWERLASH AS-ENGINE BRAKE
148-7426 POWERLASH AS-ENGINE BRAKE
FIELD INSTALLATION
148-7443 SPACER GP-ENGINE BRAKE
148-7443 SPACER GP-ENGINE BRAKE
PART OF 148-7422, 148-7440 ENGINE BRAKE GP
FIELD INSTALLATION
148-7444 SPACER GP-ENGINE BRAKE
148-7444 SPACER GP-ENGINE BRAKE
FIELD REPLACEMENT FOR 104-9528 BASE AS
AN ATTACHMENT
148-7423 SPRING GP-ENGINE BRAKE
148-7423 SPRING GP-ENGINE BRAKE
PART OF 104-9530 HOUSING GP-FRONT, 104-9531 HOUSING GP-REAR, 143-6622 KIT-BRAKE
VALVE AS-RETARDER
1S-3998 VALVE AS-RETARDER
1S-3998 VALVE AS-RETARDER
PART OF 9N-0572 CONTROL GP-BRAKESAVER
AN ATTACHMENT
VALVE GP-BRAKESAVER CONTROL
9N-3687 VALVE GP-BRAKESAVER CONTROL
9N-3687 VALVE GP-BRAKESAVER CONTROL
VALVE GP-BRAKESAVER CONTROL
9Y-7116 VALVE GP-BRAKESAVER CONTROL
9Y-7116 VALVE GP-BRAKESAVER CONTROL
PART OF 9N-3687 VALVE GP-BRAKESAVER CONTROL
VALVE GP-CHECK
5D-3056 VALVE GP-CHECK
5D-3056 VALVE GP-CHECK
PART OF 9N-0572 CONTROL GP-BRAKESAVER
AN ATTACHMENT
143-6513 CONTROL GP-ENGINE BRAKE
143-6513 CONTROL GP-ENGINE BRAKE
FIELD INSTALLATION
143-6571 CONTROL GP-ENGINE BRAKE
143-6571 CONTROL GP-ENGINE BRAKE
FIELD INSTALLATION
143-6592 CONTROL GP-ENGINE BRAKE
143-6592 CONTROL GP-ENGINE BRAKE
FIELD INSTALLATION
143-6593 CONTROL GP-ENGINE BRAKE
143-6593 CONTROL GP-ENGINE BRAKE
FIELD INSTALLATION
143-6599 CONTROL GP-ENGINE BRAKE
143-6599 CONTROL GP-ENGINE BRAKE
REPLACED BY @@@@@143-6608@@@@@
AN ATTACHMENT
143-6608 CONTROL GP-ENGINE BRAKE
143-6608 CONTROL GP-ENGINE BRAKE
FIELD INSTALLATION
148-7416 CONTROL GP-ENGINE BRAKE
148-7416 CONTROL GP-ENGINE BRAKE
FIELD INSTALLATION
148-7503 HARNESS GP-ENGINE BRAKE
148-7503 HARNESS GP-ENGINE BRAKE
FOR USE WITH COMRESSION BRAKE
FIELD INSTALLATION
143-6456 SWITCH GP-ENGINE BRAKE
143-6456 SWITCH GP-ENGINE BRAKE
FIELD INSTALLATION
143-6555 SWITCH GP-ENGINE BRAKE
143-6555 SWITCH GP-ENGINE BRAKE
PART OF 143-6571, 143-6593, 143-6599, 143-6608, 148-7416 CONTROL GP-ENGINE BRAKE
AN ATTACHMENT
143-6712 SWITCH GP-ENGINE BRAKE
143-6712 SWITCH GP-ENGINE BRAKE
FUEL PUMP (EXTERNAL)
FIELD INSTALLATION
158-4565 SWITCH GP-ENGINE BRAKE
158-4565 SWITCH GP-ENGINE BRAKE -CLUTCH
PART OF 143-6571 CONTROL GP-ENGINE BRAKE
FOR USE WITH COMPRESSION BRAKE
SWITCH GP-ENGINE BRAKE
4W-2540 SWITCH GP-ENGINE BRAKE
4W-2540 SWITCH GP-ENGINE BRAKE
FOR USE WITH BRAKESAVER ENGINES
6I-1676 SWITCH GP-ENGINE BRAKE
6I-1676 SWITCH GP-ENGINE BRAKE
S/N 3ZJ609-16181
SWITCH GP-ENGINE BRAKE
7C-0038 SWITCH GP-ENGINE BRAKE
7C-0038 SWITCH GP-ENGINE BRAKE
CAMSHAFT GP
CAMSHAFT GP
7W-3798 CAMSHAFT GP
7W-3798 CAMSHAFT GP -SINGLE
COMPRESSOR GP-REFRIGERANT
MOUNTING GP-ALTERNATOR & COMPR
129-5163 MOUNTING GP-ALTERNATOR & COMPR
129-5163 MOUNTING GP-ALTERNATOR & COMPR
FOR USE WITH PISTON TYPE FREON COMPRESSOR
AN ATTACHMENT
MOUNTING GP-ALTERNATOR & COMPR
4W-4836 MOUNTING GP-ALTERNATOR & COMPR
4W-4836 MOUNTING GP-ALTERNATOR & COMPR
FOR USE WITH ROTARY TYPE REFRIGERANT COMPRESSOR
ALSO AN ATTACHMENT
MOUNTING GP-REFRIGERANT COMPR
123-4186 MOUNTING GP-REFRIGERANT COMPR
123-4186 MOUNTING GP-REFRIGERANT COMPR
FOR USE WITH PISTON TYPE REFRIGERANT COMPRESSORS, FAN DRIVE GPS
CANNOT BE USED WITH BELT TIGHTENER OR BELT TIGHTENER FASTENER GPS
AN ATTACHMENT
MOUNTING GP-REFRIGERANT COMPR
4W-5659 MOUNTING GP-REFRIGERANT COMPR
4W-5659 MOUNTING GP-REFRIGERANT COMPR
RH FRONT SIDE MOUNTING
FOR USE WITH ROTARY REFRIGERANT COMPRESSOR
AN ATTACHMENT
MOUNTING GP-REFRIGERANT COMPR
7C-5615 MOUNTING GP-REFRIGERANT COMPR
7C-5615 MOUNTING GP-REFRIGERANT COMPR
FOR USE WITH PISTON TYPE REFRIGERANT COMPRESSOR
MOUNTING GP-REFRIGERANT COMPR
9N-5033 MOUNTING GP-REFRIGERANT COMPR
9N-5033 MOUNTING GP-REFRIGERANT COMPR
FOR USE WITH CENTER MOUNTED FAN DRIVE & SLANT ENGINE ARRANGEMENTS, REQUIRING OFFSET FAN DRIVE;PROVIDES HARDWARE FOR ALTERNATOR
AN ATTACHMENT
MOUNTING GP-REFRIGERANT COMPR
9N-6417 MOUNTING GP-REFRIGERANT COMPR
9N-6417 MOUNTING GP-REFRIGERANT COMPR
FOR USE WITH CENTER MOUNTED FAN DRIVE & SLANT ENGINE ARRANGEMENTS, REQUIRING OFFSET FAN DRIVE; PROVIDES HARDWARE FOR ALTERNATOR MTG
ALSO AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
101-1717 CRANKSHAFT GP
101-1717 CRANKSHAFT GP
FOR USE WITH TRANSMISSIONS THAT REQUIRE A WET FLYWHEEL HOUSING
AN ATTACHMENT
CRANKSHAFT GP
4P-1887 CRANKSHAFT GP
4P-1887 CRANKSHAFT GP
S/N 3ZJ1-2929
CRANKSHAFT GP
4P-1887 CRANKSHAFT GP
4P-1887 CRANKSHAFT GP
S/N 3ZJ609-16181
243-6718 KIT-CRANKSHAFT BEARING
243-6718 KIT-CRANKSHAFT BEARING
FIELD INSTALLATION
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
114-3382 COVER GP-CYLINDER BLOCK
114-3382 COVER GP-CYLINDER BLOCK
AN ATTACHMENT
COVER GP-CYLINDER BLOCK
9N-3867 COVER GP-CYLINDER BLOCK
9N-3867 COVER GP-CYLINDER BLOCK
Type 2
COVER GP-CYLINDER BLOCK
9N-3867 COVER GP-CYLINDER BLOCK
9N-3867 COVER GP-CYLINDER BLOCK
Type 1
CYLINDER BLOCK GP
108-3914 CYLINDER BLOCK GP
108-3914 CYLINDER BLOCK GP
PART OF 108-3916 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@
CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
PART OF 152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-3720 CYLINDER BLOCK GP
4P-3720 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6-111-8606 BOLT-SPECIAL, 6-290-6567 TUBE AS-OIL JET
CYLINDER HEAD GP
CYLINDER HEAD AS
115-2366 CYLINDER HEAD AS
115-2366 CYLINDER HEAD AS
PART OF 115-2363 CYLINDER HEAD GP
AN ATTACHMENT
CYLINDER HEAD AS
7W-0007 CYLINDER HEAD AS
7W-0007 CYLINDER HEAD AS
PART OF 7W-0009 CYLINDER HEAD AS, 7E-0970, 7W-2203 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7W-0009@@@@@
ALSO AN ATTACHMENT
CYLINDER HEAD AS
7W-0009 CYLINDER HEAD AS
7W-0009 CYLINDER HEAD AS
Type 1
FIELD REPLACEMENT FOR @@@@@ 7W-0007@@@@@
CYLINDER HEAD AS
7W-0009 CYLINDER HEAD AS
7W-0009 CYLINDER HEAD AS
Type 2
FIELD REPLACEMENT FOR @@@@@ 7W-0007@@@@@
CYLINDER HEAD AS
9Y-3775 CYLINDER HEAD AS
9Y-3775 CYLINDER HEAD AS
PART OF 7W-0009 CYLINDER HEAD AS, 7E-0970, 7W-2203 CYLINDER HEAD GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
105-1528 CYLINDER HEAD GP
105-1528 CYLINDER HEAD GP
MID MOUNT TURBOCHARGER
FOR USE WITH @@@@@105-1539@@@@@
AN ATTACHMENT
CYLINDER HEAD GP
105-1531 CYLINDER HEAD GP
105-1531 CYLINDER HEAD GP
Type 1
FOR USE WITH @@@@@105-1539@@@@@
AN ATTACHMENT
CYLINDER HEAD GP
105-1531 CYLINDER HEAD GP
105-1531 CYLINDER HEAD GP
Type 2
FOR USE WITH @@@@@105-1539@@@@@
AN ATTACHMENT
CYLINDER HEAD GP
110-5096 CYLINDER HEAD GP
110-5096 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@110-5099@@@@@
CYLINDER HEAD GP
110-5099 CYLINDER HEAD GP
110-5099 CYLINDER HEAD GP
PART OF 110-5096, 7W-2203 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@110-5096@@@@@
CYLINDER HEAD GP
115-2363 CYLINDER HEAD GP
115-2363 CYLINDER HEAD GP
PART OF 105-1531 CYLINDER HEAD GP
AN ATTACHMENT
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
6I-1772 CYLINDER HEAD GP
6I-1772 CYLINDER HEAD GP
S/N 3ZJ609-16181
CYLINDER HEAD GP
7C-0041 CYLINDER HEAD GP
7C-0041 CYLINDER HEAD GP
CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
PART OF 7E-3706 CYLINDER HEAD GP
Type 1
ALSO AN ATTACHMENT
CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
PART OF 105-1528, 7E-3706 CYLINDER HEAD GP
Type 2
ALSO AN ATTACHMENT
CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
FOR USE WITH ATAAC ENGINES ONLY
ALSO AN ATTACHMENT
CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
Type 1
FOR USE WITH ATAAC ENGINES ONLY
AN ATTACHMENT
CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
Type 2
FOR USE WITH ATAAC ENGINES ONLY
AN ATTACHMENT
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
PART OF 105-1531, 4W-2436, 6I-1772, 7C-0041 CYLINDER HEAD GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
S/N 3ZJ609-16181
PART OF 6I-1772 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
PART OF 4W-2436, 6I-1772, 7C-0041 CYLINDER HEAD GP
DAMPER GP
DAMPER & PULLEY GP
115-1884 DAMPER & PULLEY GP
115-1884 DAMPER & PULLEY GP
10 GROOVE. POLY-VEE PULLEY AND RUBBER DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2515 DAMPER & PULLEY GP
4P-2515 DAMPER & PULLEY GP
7.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2516 DAMPER & PULLEY GP
4P-2516 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2517 DAMPER & PULLEY GP
4P-2517 DAMPER & PULLEY GP
10.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2518 DAMPER & PULLEY GP
4P-2518 DAMPER & PULLEY GP
8.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2519 DAMPER & PULLEY GP
4P-2519 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
S/N 3ZJ1-2829
7.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
S/N 3ZJ2830-16181
7.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
S/N 3ZJ1-2829
8.5 IN DIA PULLEY
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
S/N 3ZJ2830-16181
8.5 IN DIA PULLEY
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
S/N 3ZJ1-2306
9.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
S/N 3ZJ2307-16181
9.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
S/N 3ZJ1-2829
10.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
S/N 3ZJ2830-16181
10.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
S/N 3ZJ1-2829
8.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
S/N 3ZJ2830-16181
8.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
9.5 INCH DIAMETER
Type 1
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
9.5 INCH DIAMETER
Type 2
AN ATTACHMENT
DAMPER & PULLEY GP
4P-7491 DAMPER & PULLEY GP
4P-7491 DAMPER & PULLEY GP
9.5 INCH DIAMETER
ALSO AN ATTACHMENT
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
4W-3123 DRIVE GP-ACCESSORY
4W-3123 DRIVE GP-ACCESSORY
AIR COMPRESSOR
DRIVE GP-ACCESSORY
7C-0941 DRIVE GP-ACCESSORY
7C-0941 DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
8N-9653 DRIVE GP-ACCESSORY
8N-9653 DRIVE GP-ACCESSORY
DRIVE GP-FAN
DRIVE GP-FAN
129-7141 DRIVE GP-FAN
129-7141 DRIVE GP-FAN
PROVIDES FAN ADAPTER WITH 2 INCH DIA PILOT WITH 3.5 INCH DIA BOLT CIRCLE AND A .22 INCH EXTERNAL PILOT IS PROVIDED
AN ATTACHMENT
DRIVE GP-FAN
4W-9292 DRIVE GP-FAN
4W-9292 DRIVE GP-FAN
FOR NEW SCROLL FUEL SYSTEM
DRIVE GP-FAN
7E-3714 DRIVE GP-FAN
7E-3714 DRIVE GP-FAN
PROVIDES 13.44 INCH FAN MOUNTING HEIGHT
FOR USE WITH ATAAC ENGINE WITH 9.5 INCH DIAMETER CRANK PULLEY
AN ATTACHMENT
DRIVE GP-FAN
7W-0628 DRIVE GP-FAN
7W-0628 DRIVE GP-FAN
PROVIDES FAN ADAPTER WITH 2 INCH DIAMETER X .22 INCH LONG PILOT AND, 3.5 INCH DIAMETER BOLT CIRCLE
AN ATTACHMENT
DRIVE GP-FAN
9N-2113 DRIVE GP-FAN
9N-2113 DRIVE GP-FAN
PROVIDES FAN ADAPTER WITH 2 INCH DIA X 1.14 INCH LONG PILOT, AND 4.5 INCH DIA BOLT CIRCLE
AN ATTACHMENT
DRIVE GP-FAN
9N-2117 DRIVE GP-FAN
9N-2117 DRIVE GP-FAN
PROVIDES FAN ADAPTER WITH 2 INCH DIA X 1.14 INCH LONG PILOT AND 3.5 INCH DIA BOLT CIRCLE
FOR USE WITH ROTOR TYPE COMPRESSOR
CANNOT BE USED WITH PISTON TYPE COMPRESSOR
AN ATTACHMENT
DRIVE GP-FAN
9N-2349 DRIVE GP-FAN
9N-2349 DRIVE GP-FAN
PROVIDES FAN ADAPTER WITH 2.5 INCH DIA X .79 INCH LONG PILOT WITH 4.5 INCH BOLT DIA CIRCLE
FOR USE WITH ROTOR TYPE COMPRESSOR, ALTERNATOR MOUNTING GPS
CANNOT BE USED WITH PISTON TYPE COMPRESSOR
AN ATTACHMENT
DRIVE GP-FAN
9N-3723 DRIVE GP-FAN
9N-3723 DRIVE GP-FAN
7.50 DIAMETER PULLEY
PART OF 4W-9292 DRIVE GP-FAN
FOR USE WITH AN 8.50 DIAMETER CRANK PULLEY
FASTENER GP-FAN DRIVE
7W-9005 FASTENER GP-FAN DRIVE
7W-9005 FASTENER GP-FAN DRIVE
DRIVE GP-PUMP
DRIVE GP-PUMP
1W-7935 DRIVE GP-PUMP
1W-7935 DRIVE GP-PUMP
1:1 DRIVE RATIO WITH COUNTERCLOCKWISE ROTATION. MOUNTS LEFT SIDE FRONT-HYDRAULIC PUMP. BRAKE OIL CIRCULATION
ALSO AN ATTACHMENT
FLYWHEEL GP
ADAPTER GP-FLYWHEEL
6N-9829 ADAPTER GP-FLYWHEEL
6N-9829 ADAPTER GP-FLYWHEEL
CANNOT BE USED WITH BRAKESAVER ENGINE
AN ATTACHMENT
FLYWHEEL GP
4P-3740 FLYWHEEL GP
4P-3740 FLYWHEEL GP
FOR USE WITH SPICER 15.5 INCH, 7 SPRING CLUTCH
ALSO AN ATTACHMENT
FLYWHEEL GP
4P-4795 FLYWHEEL GP
4P-4795 FLYWHEEL GP
REQUIRES BRAKESAVER
FOR USE WITH SPICER 15.5 INCH, 7 SPRING CLUTCH
AN ATTACHMENT
FLYWHEEL GP
4P-8170 FLYWHEEL GP
4P-8170 FLYWHEEL GP
FOR USE WITH 17 INCH SINGLE-PLATE DIAPHRAGM SPRING CLUTCH
AN ATTACHMENT
FLYWHEEL GP
4W-7370 FLYWHEEL GP
4W-7370 FLYWHEEL GP
FOR USE WITH A SPICER 10 SPRING DAMPENED DISK CLUTCH
CANNOT BE USED WITH BRAKESAVER ENGINES
AN ATTACHMENT
FLYWHEEL GP
6N-1299 FLYWHEEL GP
6N-1299 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING AND BRAKESAVER ENGINES
AN ATTACHMENT
FLYWHEEL GP
9N-0018 FLYWHEEL GP
9N-0018 FLYWHEEL GP
FOR USE WITH 14 INCH TWO PLATE CLUTCH & SAE NO. 1 FLYWHEEL HOUSING
FLYWHEEL GP
9N-0676 FLYWHEEL GP
9N-0676 FLYWHEEL GP
FOR USE WITH 15.5 INCH TWO PLATE CLUTCH & SAE NO. 1 FLYWHEEL HOUSING
ALSO AN ATTACHMENT
FLYWHEEL GP
9N-0678 FLYWHEEL GP
9N-0678 FLYWHEEL GP
FOR USE WITH 14 INCH CLUTCH
FLYWHEEL GP
9N-2942 FLYWHEEL GP
9N-2942 FLYWHEEL GP
FOR USE WITH 14 INCH CLUTCH
AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
HOUSING GP-FRONT
104-9530 HOUSING GP-FRONT
104-9530 HOUSING GP-FRONT
PART OF 148-7430 ENGINE BRAKE GP
HOUSING GP-FRONT
9Y-1579 HOUSING GP-FRONT
9Y-1579 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
9N-3889 COVER GP-FLYWHEEL HOUSING
9N-3889 COVER GP-FLYWHEEL HOUSING
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
HOUSING GP-FLYWHEEL
116-4895 HOUSING GP-FLYWHEEL
116-4895 HOUSING GP-FLYWHEEL
SAE #1. 7.5 DEGREE ROLL TO LEFT OR VERTICAL INSTALLATION
CANNOT BE USED WITH BRAKESAVER
AN ATTACHMENT
HOUSING GP-FLYWHEEL
116-4896 HOUSING GP-FLYWHEEL
116-4896 HOUSING GP-FLYWHEEL
VERTICAL INSTALLATION
AN ATTACHMENT
HOUSING GP-FLYWHEEL
116-4897 HOUSING GP-FLYWHEEL
116-4897 HOUSING GP-FLYWHEEL
INSTALLATION ANGLE OF 11.5 DEGREE
AN ATTACHMENT
HOUSING GP-FLYWHEEL
9N-2086 HOUSING GP-FLYWHEEL
9N-2086 HOUSING GP-FLYWHEEL
S/N 3ZJ1-6286
PERMITS BOTH ZERO DEGREE AND 7.5 DEGREE ENGINE INSTALLATION ANGLES
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
9N-2086 HOUSING GP-FLYWHEEL
9N-2086 HOUSING GP-FLYWHEEL
S/N 3ZJ6287-16181
PERMITS BOTH ZERO DEGREE AND 7.5 DEGREE ENGINE INSTALLATION ANGLES
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
9N-2184 HOUSING GP-FLYWHEEL
9N-2184 HOUSING GP-FLYWHEEL
S/N 3ZJ1-6198
HOUSING GP-FLYWHEEL
9N-2184 HOUSING GP-FLYWHEEL
9N-2184 HOUSING GP-FLYWHEEL
S/N 3ZJ609-16181
HOUSING GP-FLYWHEEL
9N-3887 HOUSING GP-FLYWHEEL
9N-3887 HOUSING GP-FLYWHEEL
S/N 3ZJ1-6282
HOUSING GP-FLYWHEEL
9N-3887 HOUSING GP-FLYWHEEL
9N-3887 HOUSING GP-FLYWHEEL
S/N 3ZJ609-16181
HOUSING GP-REAR
104-9531 HOUSING GP-REAR
104-9531 HOUSING GP-REAR
PART OF 148-7430 ENGINE BRAKE GP
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
107-3164 COVER GP-FRONT HOUSING
107-3164 COVER GP-FRONT HOUSING
PROVIDES FRONT OIL FILL AND NO FRONT SUPPORT
AN ATTACHMENT
COVER GP-FRONT HOUSING
4W-2434 COVER GP-FRONT HOUSING
4W-2434 COVER GP-FRONT HOUSING
S/N 3ZJ1-8389
COVER GP-FRONT HOUSING
4W-2434 COVER GP-FRONT HOUSING
4W-2434 COVER GP-FRONT HOUSING
S/N 3ZJ609-16181
COVER GP-FRONT HOUSING
4W-3790 COVER GP-FRONT HOUSING
4W-3790 COVER GP-FRONT HOUSING
S/N 3ZJ1-8389
COVER GP-FRONT HOUSING
4W-3790 COVER GP-FRONT HOUSING
4W-3790 COVER GP-FRONT HOUSING
S/N 3ZJ8390-16181
COVER GP-FRONT HOUSING
4W-5177 COVER GP-FRONT HOUSING
4W-5177 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
4W-7185 COVER GP-FRONT HOUSING
4W-7185 COVER GP-FRONT HOUSING
S/N 3ZJ1-8389
COVER GP-FRONT HOUSING
4W-7185 COVER GP-FRONT HOUSING
4W-7185 COVER GP-FRONT HOUSING
S/N 3ZJ8390-16181
COVER GP-FRONT HOUSING
7C-1156 COVER GP-FRONT HOUSING
7C-1156 COVER GP-FRONT HOUSING
PROVIDES AN AUXILLARY DRIVE COVER WHEN AIR COMPRESSOR IS NOT REQUIRED
AN ATTACHMENT
COVER GP-FRONT HOUSING
7W-3929 COVER GP-FRONT HOUSING
7W-3929 COVER GP-FRONT HOUSING
S/N 3ZJ1-8389
COVER GP-FRONT HOUSING
7W-3929 COVER GP-FRONT HOUSING
7W-3929 COVER GP-FRONT HOUSING
S/N 3ZJ8390-16181
COVER GP-FRONT HOUSING
7W-5469 COVER GP-FRONT HOUSING
7W-5469 COVER GP-FRONT HOUSING
S/N 3ZJ1-8389
COVER GP-FRONT HOUSING
7W-5469 COVER GP-FRONT HOUSING
7W-5469 COVER GP-FRONT HOUSING
S/N 3ZJ8390-16181
FASTENER GP-FRONT HOUSING
150-5019 FASTENER GP-FRONT HOUSING
150-5019 FASTENER GP-FRONT HOUSING
FOR USE WITH AIR INLET HEATER SYSTEM
CANNOT BE USED WITH BELT TIGHTENER & BELT & TIGHTENER FASTENER GPS
AN ATTACHMENT
FASTENER GP-FRONT HOUSING
4N-6006 FASTENER GP-FRONT HOUSING
4N-6006 FASTENER GP-FRONT HOUSING
GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
HOUSING GP-FRONT
104-9530 HOUSING GP-FRONT
104-9530 HOUSING GP-FRONT
PART OF 148-7430 ENGINE BRAKE GP
HOUSING GP-FRONT
9Y-1579 HOUSING GP-FRONT
9Y-1579 HOUSING GP-FRONT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
9N-0073 LIFTING GP-ENGINE
9N-0073 LIFTING GP-ENGINE
LIFTING GP-ENGINE
9N-6407 LIFTING GP-ENGINE
9N-6407 LIFTING GP-ENGINE
ALSO AN ATTACHMENT
MOUNTING GP-ALTERNATOR
FASTENER GP-ALTERNATOR
132-3263 FASTENER GP-ALTERNATOR
132-3263 FASTENER GP-ALTERNATOR
CANNOT BE USED WITH ALTERNATOR MOUNTING BRACKET, BELT TIGHTENER, BELT TIGHTENER BRACKET
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
124-0297 MOUNTING GP-ALTERNATOR
124-0297 MOUNTING GP-ALTERNATOR
CANNOT BE USED WITH BELT TIGHTENER GP OR BELT TIGHTENER FASTENER GPS
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
7E-2175 MOUNTING GP-ALTERNATOR
7E-2175 MOUNTING GP-ALTERNATOR
RH
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
9N-0449 MOUNTING GP-ALTERNATOR
9N-0449 MOUNTING GP-ALTERNATOR
CANNOT BE USED WITH BELT TIGHTENER OR BELT TIGHTENER FASTENER
ALSO AN ATTACHMENT
MOUNTING GP-ALTERNATOR
9N-3399 MOUNTING GP-ALTERNATOR
9N-3399 MOUNTING GP-ALTERNATOR
CANNOT BE USED WITH BELT TIGHTENER OR BELT TIGHTENER FASTENER
PAN GP-OIL
PAN GP-OIL
118-8278 PAN GP-OIL
118-8278 PAN GP-OIL -ENGINE
PROVIDES FRONT STANDARD DUTY DEEP SUMP AND INTERNAL OIL LINES
AN ATTACHMENT
PAN GP-OIL
4P-7535 PAN GP-OIL
4P-7535 PAN GP-OIL
S/N 3ZJ7988-16181
PAN GP-OIL
7C-4029 PAN GP-OIL
7C-4029 PAN GP-OIL -ENGINE
S/N 3ZJ1-647
PAN GP-OIL
7C-4029 PAN GP-OIL
7C-4029 PAN GP-OIL -ENGINE
S/N 3ZJ648-16181
PAN GP-OIL
7W-1294 PAN GP-OIL
7W-1294 PAN GP-OIL -ENGINE
PAN GP-OIL
7W-4460 PAN GP-OIL
7W-4460 PAN GP-OIL -ENGINE
S/N 3ZJ1-647
SETBACK
ALSO AN ATTACHMENT
PAN GP-OIL
7W-4460 PAN GP-OIL
7W-4460 PAN GP-OIL -ENGINE
S/N 3ZJ609-16181
SETBACK
ALSO AN ATTACHMENT
PAN GP-OIL
9N-0664 PAN GP-OIL
9N-0664 PAN GP-OIL
S/N 3ZJ1-647
PAN GP-OIL
9N-0664 PAN GP-OIL
9N-0664 PAN GP-OIL
S/N 3ZJ648-16181
PAN GP-OIL
9Y-5344 PAN GP-OIL
9Y-5344 PAN GP-OIL
S/N 3ZJ1-647
PAN GP-OIL
9Y-5344 PAN GP-OIL
9Y-5344 PAN GP-OIL
S/N 3ZJ648-16181
PISTON & ROD GP
KIT-PISTON
203-4836 KIT-PISTON
203-4836 KIT-PISTON
S/N 3ZJ2848-16181
15.6:1 COMPRESSION RATIO
FIELD INSTALLATION
PISTON & ROD GP
7E-1027 PISTON & ROD GP
7E-1027 PISTON & ROD GP
S/N 3ZJ1-582
15.6:1 RATIO
PISTON & ROD GP
7E-8657 PISTON & ROD GP
7E-8657 PISTON & ROD GP
S/N 3ZJ1-2847
15.6:1 RATIO
PISTON & ROD GP
7E-8657 PISTON & ROD GP
7E-8657 PISTON & ROD GP
S/N 3ZJ609-16181
15.6:1 RATIO
PISTON & ROD GP
7E-8701 PISTON & ROD GP
7E-8701 PISTON & ROD GP
S/N 3ZJ1-2847
15.2:1 RATIO
PISTON & ROD GP
7E-8701 PISTON & ROD GP
7E-8701 PISTON & ROD GP
S/N 3ZJ2848-16181
15.2:1 RATIO
PULLEY GP
DAMPER & PULLEY GP
115-1884 DAMPER & PULLEY GP
115-1884 DAMPER & PULLEY GP
10 GROOVE. POLY-VEE PULLEY AND RUBBER DAMPER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2515 DAMPER & PULLEY GP
4P-2515 DAMPER & PULLEY GP
7.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2516 DAMPER & PULLEY GP
4P-2516 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2517 DAMPER & PULLEY GP
4P-2517 DAMPER & PULLEY GP
10.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2518 DAMPER & PULLEY GP
4P-2518 DAMPER & PULLEY GP
8.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-2519 DAMPER & PULLEY GP
4P-2519 DAMPER & PULLEY GP
9.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
S/N 3ZJ1-2829
7.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
S/N 3ZJ2830-16181
7.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
S/N 3ZJ1-2829
8.5 IN DIA PULLEY
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
S/N 3ZJ2830-16181
8.5 IN DIA PULLEY
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
S/N 3ZJ1-2306
9.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
4P-4293 DAMPER & PULLEY GP
S/N 3ZJ2307-16181
9.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
S/N 3ZJ1-2829
10.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
4P-4294 DAMPER & PULLEY GP
S/N 3ZJ2830-16181
10.5 INCH DIAMETER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
S/N 3ZJ1-2829
8.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
4P-4295 DAMPER & PULLEY GP
S/N 3ZJ2830-16181
8.5 INCH DIAMETER
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
9.5 INCH DIAMETER
Type 1
AN ATTACHMENT
DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP
9.5 INCH DIAMETER
Type 2
AN ATTACHMENT
DAMPER & PULLEY GP
4P-7491 DAMPER & PULLEY GP
4P-7491 DAMPER & PULLEY GP
9.5 INCH DIAMETER
ALSO AN ATTACHMENT
SUPPRESSION GP-SOUND
PANEL GP-SOUND SUPPRESSION
1W-2415 PANEL GP-SOUND SUPPRESSION
1W-2415 PANEL GP-SOUND SUPPRESSION
RH
ALSO AN ATTACHMENT
PANEL GP-SOUND SUPPRESSION
2W-0404 PANEL GP-SOUND SUPPRESSION
2W-0404 PANEL GP-SOUND SUPPRESSION
LH
ALSO AN ATTACHMENT
PANEL GP-SOUND SUPPRESSION
7W-8832 PANEL GP-SOUND SUPPRESSION
7W-8832 PANEL GP-SOUND SUPPRESSION
CANNOT BE USED WITH OIL PAN OR BRAKESAVER ENGINES
ALSO AN ATTACHMENT
PANEL GP-SOUND SUPPRESSION
9N-2243 PANEL GP-SOUND SUPPRESSION
9N-2243 PANEL GP-SOUND SUPPRESSION -ENGINE
SOUND SUPPRESSION-SUMP SECTION
FOR USE WITH BRAKESAVER REAR SUMP
ALSO AN ATTACHMENT
PANEL GP-SOUND SUPPRESSION
9N-2579 PANEL GP-SOUND SUPPRESSION
9N-2579 PANEL GP-SOUND SUPPRESSION -ENGINE
SOUND SUPPRESSION-SHALLOW SECTION
FOR USE WITH BRAKESAVER-REAR SUMP
ALSO AN ATTACHMENT
PANEL GP-SOUND SUPPRESSION
9Y-5297 PANEL GP-SOUND SUPPRESSION
9Y-5297 PANEL GP-SOUND SUPPRESSION
FOR USE WITH STANDARD OIL PAN WITH SOUND PLATE
ALSO AN ATTACHMENT
SERPENTINE/V-BELTS
4P-1667 V-BELT SET
4P-1667 V-BELT SET
1524 MM (60 IN) LG
AN ATTACHMENT
7N-3949 V-BELT SET
7N-3949 V-BELT SET
1359MM (53.5IN) LG
AN ATTACHMENT
9L-6644 V-BELT SET
9L-6644 V-BELT SET
1549 MM (60 INCH) LONG
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
106-0854 COVER GP-VALVE MECHANISM
106-0854 COVER GP-VALVE MECHANISM
OIL FILL FIRST POSITION & BREATHER FOURTH POSITION
AN ATTACHMENT
COVER GP-VALVE MECHANISM
4N-2272 COVER GP-VALVE MECHANISM
4N-2272 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
6I-1728 COVER GP-VALVE MECHANISM
6I-1728 COVER GP-VALVE MECHANISM
PROVIDES COVER WITH BREATHER IN FOURTH POSITION AND AND OIL FILL IN THE THIRD POSITION
FOR USE WITH PACBRAKE
AN ATTACHMENT
COVER GP-VALVE MECHANISM
6I-1737 COVER GP-VALVE MECHANISM
6I-1737 COVER GP-VALVE MECHANISM
OIL FILL IN SECOND POSITION
FOR USE WITH PACBRAKE
AN ATTACHMENT
COVER GP-VALVE MECHANISM
6I-1738 COVER GP-VALVE MECHANISM
6I-1738 COVER GP-VALVE MECHANISM
NO OIL FILL
FOR USE WITH PACBRAKE
AN ATTACHMENT
COVER GP-VALVE MECHANISM
6I-1739 COVER GP-VALVE MECHANISM
6I-1739 COVER GP-VALVE MECHANISM
OIL FILL IN FIRST AND THIRD POSISIONS
FOR USE WITH PACBRAKE
AN ATTACHMENT
COVER GP-VALVE MECHANISM
6I-1740 COVER GP-VALVE MECHANISM
6I-1740 COVER GP-VALVE MECHANISM
S/N 3ZJ609-16181
OIL FILL IN THIRD POSITION
FOR USE WITH PACBRAKE
COVER GP-VALVE MECHANISM
6I-1741 COVER GP-VALVE MECHANISM
6I-1741 COVER GP-VALVE MECHANISM
S/N 3ZJ609-16181
OIL FILL IN THIRD POSITION
FOR USE WITH PACBRAKE
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
6I-1742 COVER GP-VALVE MECHANISM
6I-1742 COVER GP-VALVE MECHANISM
NO OIL FILL
FOR USE WITH PACBRAKE
AN ATTACHMENT
COVER GP-VALVE MECHANISM
6I-2908 COVER GP-VALVE MECHANISM
6I-2908 COVER GP-VALVE MECHANISM
FOR USE WITH JAKE BRAKE
AN ATTACHMENT
COVER GP-VALVE MECHANISM
6I-2909 COVER GP-VALVE MECHANISM
6I-2909 COVER GP-VALVE MECHANISM
FOR USE WITH PACBRAKE
AN ATTACHMENT
COVER GP-VALVE MECHANISM
6I-3820 COVER GP-VALVE MECHANISM
6I-3820 COVER GP-VALVE MECHANISM
FOR USE WITH PACBRAKE
AN ATTACHMENT
COVER GP-VALVE MECHANISM
7C-0036 COVER GP-VALVE MECHANISM
7C-0036 COVER GP-VALVE MECHANISM
OIL FILL IN THIRD POSITION
FOR USE WITH JAKE BRAKE
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
7C-0730 COVER GP-VALVE MECHANISM
7C-0730 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7E-1532 COVER GP-VALVE MECHANISM
7E-1532 COVER GP-VALVE MECHANISM
OIL FILL IN SECOND POSITION
FOR USE WITH JAKE BRAKE
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
7E-1672 COVER GP-VALVE MECHANISM
7E-1672 COVER GP-VALVE MECHANISM
OIL FILL IN FIRST AND THIRD POSITION
FOR USE WITH JAKE BRAKE
COVER GP-VALVE MECHANISM
7E-9241 COVER GP-VALVE MECHANISM
7E-9241 COVER GP-VALVE MECHANISM
FOR USE WITH JAKE BRAKE
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
7N-4467 COVER GP-VALVE MECHANISM
7N-4467 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9N-2093 COVER GP-VALVE MECHANISM
9N-2093 COVER GP-VALVE MECHANISM
OIL FILL IN FIRST AND THIRD POSITION
CANNOT BE USED WITH JAKE BRAKE OR PACBRAKE
COVER GP-VALVE MECHANISM
9N-3618 COVER GP-VALVE MECHANISM
9N-3618 COVER GP-VALVE MECHANISM
FOR USE WITH REAR EXHAUST TURBO
COVER GP-VALVE MECHANISM
9N-3646 COVER GP-VALVE MECHANISM
9N-3646 COVER GP-VALVE MECHANISM
CANNOT BE USED WITH JAKE BRAKE OR PACBRAKE
COVER GP-VALVE MECHANISM
9Y-1664 COVER GP-VALVE MECHANISM
9Y-1664 COVER GP-VALVE MECHANISM
NO OIL FILL
FOR USE WITH JAKE BRAKE
COVER GP-VALVE MECHANISM
9Y-5294 COVER GP-VALVE MECHANISM
9Y-5294 COVER GP-VALVE MECHANISM
OIL FILL IN THIRD POSITION
FOR USE WITH JAKE BRAKE
COVER GP-VALVE MECHANISM
9Y-7754 COVER GP-VALVE MECHANISM
9Y-7754 COVER GP-VALVE MECHANISM
NO OIL FILL
FOR USE WITH JAKE BRAKE
COVER GP-VALVE MECHANISM
9Y-8206 COVER GP-VALVE MECHANISM
9Y-8206 COVER GP-VALVE MECHANISM
NO OIL FILL
CANNOT BE USED WITH JAKE BRAKE OR PACBRAKE
ROCKER ARM GP
4N-1045 ROCKER ARM GP
4N-1045 ROCKER ARM GP
PART OF 4W-2461 VALVE MECHANISM GP
ROCKER ARM GP
6I-1729 ROCKER ARM GP
6I-1729 ROCKER ARM GP
S/N 3ZJ609-16181
PART OF 6I-1730 VALVE MECHANISM GP
ROCKER ARM GP
7C-0032 ROCKER ARM GP
7C-0032 ROCKER ARM GP
PART OF 7C-0050 VALVE MECHANISM GP
VALVE MECHANISM GP
4W-2461 VALVE MECHANISM GP
4W-2461 VALVE MECHANISM GP -ENGINE
VALVE MECHANISM GP
6I-1730 VALVE MECHANISM GP
6I-1730 VALVE MECHANISM GP
S/N 3ZJ609-16181
VALVE MECHANISM GP
7C-0050 VALVE MECHANISM GP
7C-0050 VALVE MECHANISM GP -ENGINE
HOUSING GP-REAR
HOUSING GP-REAR
104-9531 HOUSING GP-REAR
104-9531 HOUSING GP-REAR
PART OF 148-7430 ENGINE BRAKE GP
232-3675 KIT-REAR COVER GASKET
232-3675 KIT-REAR COVER GASKET
FIELD INSTALLATION
437-8670 KIT-REAR COVER GASKET
437-8670 KIT-REAR COVER GASKET
FIELD INSTALLATION

Information:

(For parts list, see above)

General Service Information
Tu-Flo 300 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 400, 500, 1000 Compressors
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 501 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 600 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 700 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Truck Engine News
Smaller Connecting Rod Bolt Used In 4W6425 Air Compressor; Use Correct Torque
1991/05/01
3406 Truck Engine Component Update
1992/10/01
New Gasket Provides Improved Sealing Between Air Compressor And Drive{1803}
1994/09/01
124-5572 Air Pressure Relief Valve Available{1803}
1995/04/01
Cylinder Head Gasket Changed For Tu-Flo 550/750 Air Compressor Groups{1803}
1997/07/01
Special Instructions Are Now Available For Converting Four Cylinder Air Compressor Air Supply From Boosted To Naturally Aspirated, Eliminating Inlet Regulating Valve And Related Maintenance{1803}
1999/07/01
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Disassembly and Assembly
Air Compressor
3406B DIESEL TRUCK ENGINE
Air Compressor And Accessory Drive
3406B DIESEL TRUCK ENGINE
Air Compressor
3406C DIESEL TRUCK ENGINE
Air Compressor And Accessory Drive
3406C DIESEL TRUCK ENGINE
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Specifications
Belt Tension Chart
3406B DIESEL TRUCK ENGINE
Pulley Tightener Group
3406B DIESEL TRUCK ENGINE
Belt Tension Chart
3406C DIESEL TRUCK ENGINE
Pulley Tightener Group
3406C DIESEL TRUCK ENGINE
Belt Tension Chart
3406C DIESEL TRUCK ENGINE
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Truck Engine News
3406 Truck Engine Component Update
1992/10/01
Maintenance Tips For 60799 Exhaust Restrictor; Additional Spring Improves Performance Of 60799 Exhaust Restrictor
1993/01/01
New O-ring Seals In BrakeSaver Group{1155}
1996/08/23
Service Letter-NACD
Product Support Program For Low Power Complaints On Certain 3406C Engines (425 HP With Brakesaver)
Product Support Program For Low Power Complaints On Certain 3406C Engines (425 HP With Brakesaver)
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Jake Brake
3406B DIESEL TRUCK ENGINE
BrakeSaver Group
3406B DIESEL TRUCK ENGINE
BrakeSaver Control Valve
3406B DIESEL TRUCK ENGINE
BrakeSaver Fastener Group
3406B DIESEL TRUCK ENGINE
Switch Group (Used On Engines With BrakeSaver)
3406C DIESEL TRUCK ENGINE
Jake Brake
3406C DIESEL TRUCK ENGINE
BrakeSaver Group
3406C DIESEL TRUCK ENGINE
BrakeSaver Control Valve
3406C DIESEL TRUCK ENGINE
BrakeSaver Fastener Group
3406C DIESEL TRUCK ENGINE
Jake Brake
3406C DIESEL TRUCK ENGINE
Service Letter-China
Product Support Program For Low Power Complaints On Certain 3406C Engines (425 HP With Brakesaver)
Product Support Program For Low Power Complaints On Certain 3406C Engines (425 HP With Brakesaver)
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Oil Cooler (BrakeSaver)
3406B DIESEL TRUCK ENGINE
Flywheel (BrakeSaver)
3406B DIESEL TRUCK ENGINE
BrakeSaver Control Valve
3406B DIESEL TRUCK ENGINE
BrakeSaver
3406B DIESEL TRUCK ENGINE
Oil Pan (BrakeSaver)
3406B DIESEL TRUCK ENGINE
Oil Pump (BrakeSaver)
3406B DIESEL TRUCK ENGINE
Jacobs Engine Brake
3406B DIESEL TRUCK ENGINE
Oil Cooler (BrakeSaver) [If So Equipped]
3406C DIESEL TRUCK ENGINE
Flywheel (BrakeSaver) [If So Equipped]
3406C DIESEL TRUCK ENGINE
BrakeSaver Control Valve [If So Equipped]
3406C DIESEL TRUCK ENGINE
BrakeSaver [If So Equipped]
3406C DIESEL TRUCK ENGINE
Oil Pan (BrakeSaver) [If So Equipped]
3406C DIESEL TRUCK ENGINE
Oil Pump (BrakeSaver) [If So Equipped]
3406C DIESEL TRUCK ENGINE
Jacobs Engine Brake [If So Equipped]
3406C DIESEL TRUCK ENGINE
Service Magazine
Different Mounting Hole Locations In Ring Gear Plate Assembly And Rotor Assembly For BrakeSaver{1155}
1979/09/03
Truck Engine News
New 8T2998 Lubricant Available
1986/02/01
Camshaft Idler Gear Shaft/Bolts
1993/08/01
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure
1993/09/01
Camshaft Drive Gear Inspection
1993/10/01
New Valve Lifter Assembly Provide Improved Lubrication Of Lifter Roller And Camshaft Lobes{1209,1210}
1994/06/24
New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01
Engine News
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Specifications
Camshaft
3406B DIESEL TRUCK ENGINE
Camshaft Bearings
3406B DIESEL TRUCK ENGINE
Camshaft
3406C DIESEL TRUCK ENGINE
Camshaft Bearings
3406C DIESEL TRUCK ENGINE
Camshaft
3406C DIESEL TRUCK ENGINE
Camshaft Bearings
3406C DIESEL TRUCK ENGINE
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Camshaft Bearings
3406B DIESEL TRUCK ENGINE
Camshaft
3406B DIESEL TRUCK ENGINE
Camshaft
3406C DIESEL TRUCK ENGINE
Camshaft Bearings
3406C DIESEL TRUCK ENGINE
Service Magazine
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Truck Engine News
Troubleshooting Information For Horton Diesltemp© Fan Clutches{1359}
1996/02/26
Service Magazine
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Truck Engine News
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
Inspection Marks On Bearings
1982/05/19
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
Remanufactured Undersize Crankshafts Are Available
1984/04/04
Crankshaft Seal Usage On 3400 Series Truck Engines
1985/12/01
3406 Truck Engine Component Update
1992/10/01
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01
Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/01
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/27
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Specifications
Connecting Rod And Main Bearing Journals
3406B DIESEL TRUCK ENGINE
Crankshaft
3406B DIESEL TRUCK ENGINE
Connecting Rod And Main Bearing Journals
3406C DIESEL TRUCK ENGINE
Crankshaft
3406C DIESEL TRUCK ENGINE
Connecting Rod And Main Bearing Journals
3406C DIESEL TRUCK ENGINE
Crankshaft
3406C DIESEL TRUCK ENGINE
Disassembly and Assembly
Crankshaft Main Bearings
3406B DIESEL TRUCK ENGINE
Crankshaft
3406B DIESEL TRUCK ENGINE
Crankshaft Front Seal And Wear Sleeve
3406B DIESEL TRUCK ENGINE
Crankshaft Rear Seal And Wear Sleeve
3406B DIESEL TRUCK ENGINE
Crankshaft Main Bearings
3406C DIESEL TRUCK ENGINE
Crankshaft
3406C DIESEL TRUCK ENGINE
Crankshaft Front Seal And Wear Sleeve
3406C DIESEL TRUCK ENGINE
Crankshaft Rear Seal And Wear Sleeve
3406C DIESEL TRUCK ENGINE
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Truck Engine News
Inspection Marks On Bearings
1982/05/19
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
New Liner Seat Insert Available
1983/08/31
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings
1985/11/01
New Cylinder Liner Available
1986/02/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
3406 Truck Engine Component Update
1992/10/01
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used and New Cylinder Liner Projection Measurement Method
1992/11/01
Cylinder Pack Puller Groups Improved
1992/12/01
Damper Requirements For Remanufactured Short Block
1993/08/01
Flywheel Housing to Cylinder Block Joint Improvements{1157,1201}
1994/01/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/01
New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/26
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Specifications
Idler Gear Shaft Pilot Bore
3406B DIESEL TRUCK ENGINE
Camshaft Bearings
3406B DIESEL TRUCK ENGINE
Cylinder Block
3406B DIESEL TRUCK ENGINE
Cylinder Liners
3406B DIESEL TRUCK ENGINE
Cylinder Liner Projection
3406B DIESEL TRUCK ENGINE
Connecting Rod And Main Bearing Journals
3406B DIESEL TRUCK ENGINE
Idler Gear Shaft Pilot Bore
3406C DIESEL TRUCK ENGINE
Camshaft Bearings
3406C DIESEL TRUCK ENGINE
Cylinder Block
3406C DIESEL TRUCK ENGINE
Cylinder Liners
3406C DIESEL TRUCK ENGINE
Cylinder Liner Projection
3406C DIESEL TRUCK ENGINE
Connecting Rod And Main Bearing Journals
3406C DIESEL TRUCK ENGINE
Idler Gear Shaft Pilot Bore
3406C DIESEL TRUCK ENGINE
Camshaft Bearings
3406C DIESEL TRUCK ENGINE
Cylinder Block
3406C DIESEL TRUCK ENGINE
Cylinder Liners
3406C DIESEL TRUCK ENGINE
Cylinder Liner Projection
3406C DIESEL TRUCK ENGINE
Connecting Rod And Main Bearing Journals
3406C DIESEL TRUCK ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Disassembly and Assembly
Spacer Plate
3406B DIESEL TRUCK ENGINE
Piston Cooling Tubes
3406B DIESEL TRUCK ENGINE
Crankshaft Main Bearings
3406B DIESEL TRUCK ENGINE
Camshaft Bearings
3406B DIESEL TRUCK ENGINE
Cylinder Liners
3406B DIESEL TRUCK ENGINE
Spacer Plate
3406C DIESEL TRUCK ENGINE
Piston Cooling Tubes
3406C DIESEL TRUCK ENGINE
Crankshaft Main Bearings
3406C DIESEL TRUCK ENGINE
Camshaft Bearings
3406C DIESEL TRUCK ENGINE
Cylinder Liners
3406C DIESEL TRUCK ENGINE
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Liner Seat Insert Available{1217}
1983/08/15
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Cylinder Block Groups Used{1201}
1984/10/01
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
New Cylinder Liner Available{1201}
1986/02/10
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Truck Engine News
Separate Valve Stem Gauges Available
1982/06/23
Engine Valve Stem "use Again " Specifications
1983/03/02
New Liner Seat Insert Available
1983/08/31
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/11/07
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Improved Head Gasket Used; Service Tips
1990/02/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Cylinder Heads Have Additional Coolant Passages
1992/06/01
New Liner Seat Inserts Available
1992/11/01
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used and New Cylinder Liner Projection Measurement Method
1992/11/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/01/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/22
New Intake And Exhaust Valves Used{1105,1100}
1994/06/24
New Water Seals Used in 3400 Head Assemblies{1124}
1994/08/30
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/01
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/01
Service Cylinder Head Assemblies Have Round Exhaust Ports{1100,1101}
1995/07/01
New And Reconditioned Valve Projection Specifications{1105}
1995/08/01
New Stronger Cylinder Head Bolts Used{1100}
1996/06/24
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/10/01
Engine News
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Specifications
Valves
3406B DIESEL TRUCK ENGINE
Cylinder Head
3406B DIESEL TRUCK ENGINE
Valves
3406C DIESEL TRUCK ENGINE
Cylinder Head
3406C DIESEL TRUCK ENGINE
Valves
3406C DIESEL TRUCK ENGINE
Cylinder Head
3406C DIESEL TRUCK ENGINE
Information Release Memo
DISCONTINUATION OF REMAN CYLINDER HEAD KITS 0R7744 & 0R7745 FOR 3406B AND 3406C ENGINES
DISCONTINUATION OF REMAN CYLINDER HEAD KITS 0R7744 & 0R7745 FOR 3406B AND 3406C ENGINES
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Nozzle Adapters (Earlier)
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzles And Adapters (Later)
3406B DIESEL TRUCK ENGINE
Cylinder Head Assembly
3406B DIESEL TRUCK ENGINE
Valves
3406B DIESEL TRUCK ENGINE
Valve Seat Inserts
3406B DIESEL TRUCK ENGINE
Bridge Dowels
3406B DIESEL TRUCK ENGINE
Valve Guides
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzles And Adapters
3406C DIESEL TRUCK ENGINE
Cylinder Head Assembly
3406C DIESEL TRUCK ENGINE
Valves
3406C DIESEL TRUCK ENGINE
Valve Seat Inserts
3406C DIESEL TRUCK ENGINE
Bridge Dowels
3406C DIESEL TRUCK ENGINE
Valve Guides
3406C DIESEL TRUCK ENGINE
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Truck Engine News
3406 Truck Engine Component Update
1992/10/01
Damper Requirements For Remanufactured Short Block
1993/08/01
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/01
Viscous Damper Assembly Used In Production{1205}
1996/04/19
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/27
Specifications
Pulley Tightener Group
3406B DIESEL TRUCK ENGINE
Pulley And Damper Groups
3406B DIESEL TRUCK ENGINE
Pulley Tightener Group
3406C DIESEL TRUCK ENGINE
Pulley And Damper Groups
3406C DIESEL TRUCK ENGINE
Disassembly and Assembly
Vibration Damper And Pulley
3406B DIESEL TRUCK ENGINE
Vibration Damper And Pulley
3406C DIESEL TRUCK ENGINE
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Specifications
Auxiliary Drive Group
3406B DIESEL TRUCK ENGINE
Accessory Drive Groups
3406B DIESEL TRUCK ENGINE
Auxiliary Drive Group
3406C DIESEL TRUCK ENGINE
Accessory Drive Groups
3406C DIESEL TRUCK ENGINE
Auxiliary Drive Group
3406C DIESEL TRUCK ENGINE
Disassembly and Assembly
Air Compressor And Accessory Drive
3406B DIESEL TRUCK ENGINE
Air Compressor And Accessory Drive
3406C DIESEL TRUCK ENGINE
Specifications
Auxiliary Drive Group
3406B DIESEL TRUCK ENGINE
Accessory Drive Groups
3406B DIESEL TRUCK ENGINE
Auxiliary Drive Group
3406C DIESEL TRUCK ENGINE
Accessory Drive Groups
3406C DIESEL TRUCK ENGINE
Auxiliary Drive Group
3406C DIESEL TRUCK ENGINE
Disassembly and Assembly
Air Compressor And Accessory Drive
3406B DIESEL TRUCK ENGINE
Air Compressor And Accessory Drive
3406C DIESEL TRUCK ENGINE
Truck Engine News
Troubleshooting Information For Horton Diesltemp© Fan Clutches{1359}
1996/02/26
Disassembly and Assembly
Fan Drive
3406B DIESEL TRUCK ENGINE
Fan Drive
3406C DIESEL TRUCK ENGINE
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Truck Engine News
Impeller Appearance On Remanufactured 3406 Water Pump{1364,1361}
1994/09/01
New Standpipe Installed On Water Pumps{1361}
1995/07/01
Improved Water Pump Groups Available{1361}
1996/10/01
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Machining 3406 Engine Water Pumps With 9N-5034 Housing to Accept a 108-7930 Tapered Roller Bearing Assembly{1361}
Machining 3406 Engine Water Pumps With 9N-5034 Housing to Accept a 108-7930 Tapered Roller Bearing Assembly{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-Australia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-CFEL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-CSARL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-Americas
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-Brazil
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Service Letter-Truck/Ag/Marine
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-China
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-Asia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter-APD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
A Standpipe Needs To Be Installed In Water Pumps Used On 3406 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Disassembly and Assembly
Water Pump
3406B DIESEL TRUCK ENGINE
Water Pump
3406C DIESEL TRUCK ENGINE
Service Magazine
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Truck Engine News
No Gaskets Used With Aluminum Flywheel Housings
1991/10/01
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/10/01
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Flywheel Housing
3406B DIESEL TRUCK ENGINE
Flywheels
3406B DIESEL TRUCK ENGINE
Flywheel Adapter Group
3406B DIESEL TRUCK ENGINE
Flywheel Housing Bore
3406B DIESEL TRUCK ENGINE
Flywheel Housing Runout
3406B DIESEL TRUCK ENGINE
Flywheel Runout
3406B DIESEL TRUCK ENGINE
Flywheel Housing
3406C DIESEL TRUCK ENGINE
Flywheels
3406C DIESEL TRUCK ENGINE
Flywheel Adapter Group
3406C DIESEL TRUCK ENGINE
Flywheel Housing Bore
3406C DIESEL TRUCK ENGINE
Flywheel Housing Runout
3406C DIESEL TRUCK ENGINE
Flywheel Runout
3406C DIESEL TRUCK ENGINE
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Flywheel
3406B DIESEL TRUCK ENGINE
Flywheel Housing
3406B DIESEL TRUCK ENGINE
Flywheel (BrakeSaver)
3406B DIESEL TRUCK ENGINE
Flywheel
3406C DIESEL TRUCK ENGINE
Flywheel Housing
3406C DIESEL TRUCK ENGINE
Flywheel (BrakeSaver) [If So Equipped]
3406C DIESEL TRUCK ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Truck Engine News
New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01
Timing Procedure Aid -Alignment Of Timing Gear Marks On 3406 Engines{1206}
1997/01/27
Specifications
Idler Gear Shaft Pilot Bore
3406B DIESEL TRUCK ENGINE
Idler Gear Assembly (For Front Gear Group)
3406B DIESEL TRUCK ENGINE
Front (Timing) Gear Group
3406B DIESEL TRUCK ENGINE
Idler Gear Shaft Pilot Bore
3406C DIESEL TRUCK ENGINE
Idler Gear Assembly (For Front Gear Group)
3406C DIESEL TRUCK ENGINE
Front (Timing) Gear Group
3406C DIESEL TRUCK ENGINE
Idler Gear Shaft Pilot Bore
3406C DIESEL TRUCK ENGINE
Idler Gear Assembly (For Front Gear Group)
3406C DIESEL TRUCK ENGINE
Front (Timing) Gear Group
3406C DIESEL TRUCK ENGINE
Disassembly and Assembly
Timing Gears And Plate
3406B DIESEL TRUCK ENGINE
Air Compressor And Accessory Drive
3406B DIESEL TRUCK ENGINE
Timing Gear Cover
3406B DIESEL TRUCK ENGINE
Timing Gears And Plate
3406C DIESEL TRUCK ENGINE
Timing Gear Cover
3406C DIESEL TRUCK ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Truck Engine News
No Gaskets Used With Aluminum Flywheel Housings
1991/10/01
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01
Flywheel Housing to Cylinder Block Joint Improvements{1157,1201}
1994/01/01
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/10/01
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Flywheel Housing
3406B DIESEL TRUCK ENGINE
Flywheel Housing Bore
3406B DIESEL TRUCK ENGINE
Flywheel Housing Runout
3406B DIESEL TRUCK ENGINE
Flywheel Housing
3406C DIESEL TRUCK ENGINE
Flywheel Housing Bore
3406C DIESEL TRUCK ENGINE
Flywheel Housing Runout
3406C DIESEL TRUCK ENGINE
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Crankshaft Rear Seal And Wear Sleeve
3406B DIESEL TRUCK ENGINE
Flywheel Housing
3406B DIESEL TRUCK ENGINE
Flywheel Housing
3406C DIESEL TRUCK ENGINE
Crankshaft Rear Seal And Wear Sleeve
3406C DIESEL TRUCK ENGINE
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Truck Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/10/01
Specifications
Front Housing And Covers
3406B DIESEL TRUCK ENGINE
Front Housing And Covers
3406C DIESEL TRUCK ENGINE
Front Housing And Covers
3406C DIESEL TRUCK ENGINE
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3406B DIESEL TRUCK ENGINE
Timing Gears And Plate
3406B DIESEL TRUCK ENGINE
Timing Gear Cover
3406B DIESEL TRUCK ENGINE
Crankshaft Front Seal And Wear Sleeve
3406C DIESEL TRUCK ENGINE
Timing Gears And Plate
3406C DIESEL TRUCK ENGINE
Timing Gear Cover
3406C DIESEL TRUCK ENGINE
Truck Engine News
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19
Inspection Marks On Bearings
1982/05/19
Separate Valve Stem Gauges Available
1982/06/23
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
Engine Valve Stem "use Again " Specifications
1983/03/02
Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/06/29
New Liner Seat Insert Available
1983/08/31
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings
1983/10/05
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings
1985/11/01
Crankshaft Seal Usage On 3400 Series Truck Engines
1985/12/01
New 8T2998 Lubricant Available
1986/02/01
New Cylinder Liner Available
1986/02/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Engine Timing Indicator Group Available
1986/07/01
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Plasma Top Piston Rings Replace Chrome Rings
1989/09/01
Improved Head Gasket Used; Service Tips
1990/02/01
New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01
3406 Truck Engine Component Update
1992/10/01
Cylinder Pack Puller Groups Improved
1992/12/01
Maintenance Tips For 60799 Exhaust Restrictor; Additional Spring Improves Performance Of 60799 Exhaust Restrictor
1993/01/01
Damper Requirements For Remanufactured Short Block
1993/08/01
Flywheel Housing to Cylinder Block Joint Improvements{1157,1201}
1994/01/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/22
New Intake And Exhaust Valves Used{1105,1100}
1994/06/24
New Valve Lifter Assembly Provide Improved Lubrication Of Lifter Roller And Camshaft Lobes{1209,1210}
1994/06/24
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/01
Impeller Appearance On Remanufactured 3406 Water Pump{1364,1361}
1994/09/01
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01
New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/26
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Procedures To Install a 3406C Electronic Engine, And Reprogram The Electronic Control Module (ECM), In a Truck Chassis Formerly Equipped With a 3406B PEEC Engine{1000, 1900}
Procedures To Install a 3406C Electronic Engine, And Reprogram The Electronic Control Module (ECM), In a Truck Chassis Formerly Equipped With a 3406B PEEC Engine{1000, 1900}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Specifications
Auxiliary Drive Group
3406C DIESEL TRUCK ENGINE
Idler Gear Shaft Pilot Bore
3406C DIESEL TRUCK ENGINE
Idler Gear Assembly (For Front Gear Group)
3406C DIESEL TRUCK ENGINE
Front Housing And Covers
3406C DIESEL TRUCK ENGINE
Engine Front Support
3406C DIESEL TRUCK ENGINE
Camshaft Bearings
3406C DIESEL TRUCK ENGINE
Valve Rocker Arms, Lifters And Bridges
3406C DIESEL TRUCK ENGINE
Jake Brake
3406C DIESEL TRUCK ENGINE
Oil Pan
3406C DIESEL TRUCK ENGINE
Cylinder Block
3406C DIESEL TRUCK ENGINE
Cylinder Liners
3406C DIESEL TRUCK ENGINE
Cylinder Liner Projection
3406C DIESEL TRUCK ENGINE
Pistons And Rings
3406C DIESEL TRUCK ENGINE
Connecting Rod And Main Bearing Journals
3406C DIESEL TRUCK ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Magazine
Connecting Rod Changes And Replacement Information{1218}
1980/03/03
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Cylinder Block Groups Used{1201}
1984/10/01
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
New Cylinder Liner Available{1201}
1986/02/10
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Engine Coolant Can Be Recycled{1395}
1989/11/13
Specifications
Engine Front Support
3406B DIESEL TRUCK ENGINE
Engine Front Support
3406C DIESEL TRUCK ENGINE
Engine Front Support
3406C DIESEL TRUCK ENGINE
Disassembly and Assembly
Engine Front Support
3406B DIESEL TRUCK ENGINE
Engine Front Support
3406C DIESEL TRUCK ENGINE
Truck Engine News
New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01
Specifications
Oil Pan
3406B DIESEL TRUCK ENGINE
Oil Pan
3406C DIESEL TRUCK ENGINE
Oil Pan
3406C DIESEL TRUCK ENGINE
Disassembly and Assembly
Oil Pan
3406B DIESEL TRUCK ENGINE
Oil Pan (BrakeSaver)
3406B DIESEL TRUCK ENGINE
Oil Pan
3406C DIESEL TRUCK ENGINE
Oil Pan (BrakeSaver) [If So Equipped]
3406C DIESEL TRUCK ENGINE
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Truck Engine News
Inspection Marks On Bearings
1982/05/19
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/06/29
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings
1983/10/05
Reuse Of Engine Bearings
1983/12/21
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings
1985/11/01
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/11/01
Plasma Top Piston Rings Replace Chrome Rings
1989/09/01
New Piston Pin Retainer Used
1991/10/01
Cylinder Pack Puller Groups Improved
1992/12/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/01
Proper Method For Cleaning Anodized-Coated Aluminum Pistons{1214}
1995/07/01
Engine News
Wider Connecting Rods Have More Bearing Area
1979/10/31
Connecting Rod Changes And Replacement Information
1980/03/12
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Specifications
Pistons And Rings
3406B DIESEL TRUCK ENGINE
Connecting Rods
3406B DIESEL TRUCK ENGINE
Connecting Rod And Main Bearing Journals
3406B DIESEL TRUCK ENGINE
Pistons And Rings
3406C DIESEL TRUCK ENGINE
Connecting Rods
3406C DIESEL TRUCK ENGINE
Connecting Rod And Main Bearing Journals
3406C DIESEL TRUCK ENGINE
Pistons And Rings
3406C DIESEL TRUCK ENGINE
Connecting Rods
3406C DIESEL TRUCK ENGINE
Connecting Rod And Main Bearing Journals
3406C DIESEL TRUCK ENGINE
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Disassembly and Assembly
Piston Cooling Tubes
3406B DIESEL TRUCK ENGINE
Connecting Rod Bearings
3406B DIESEL TRUCK ENGINE
Crankshaft Main Bearings
3406B DIESEL TRUCK ENGINE
Pistons And Connecting Rod Assemblies
3406B DIESEL TRUCK ENGINE
Piston Cooling Tubes
3406C DIESEL TRUCK ENGINE
Connecting Rod Bearings
3406C DIESEL TRUCK ENGINE
Crankshaft Main Bearings
3406C DIESEL TRUCK ENGINE
Pistons And Connecting Rod Assemblies
3406C DIESEL TRUCK ENGINE
Service Magazine
Connecting Rod Changes And Replacement Information{1218}
1980/03/03
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Pistons With Thicker Top Rings Must Be Used In Correct Applications {1214,1215}
1983/04/18
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Plasma Top Piston Rings Replace Chrome Rings{1215,1214}
1989/09/11
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Truck Engine News
3406 Truck Engine Component Update
1992/10/01
Damper Requirements For Remanufactured Short Block
1993/08/01
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/01
Troubleshooting Information For Horton Diesltemp© Fan Clutches{1359}
1996/02/26
Viscous Damper Assembly Used In Production{1205}
1996/04/19
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/27
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Pulley Tightener Group
3406B DIESEL TRUCK ENGINE
Pulley And Damper Groups
3406B DIESEL TRUCK ENGINE
Pulley Tightener Group
3406C DIESEL TRUCK ENGINE
Pulley And Damper Groups
3406C DIESEL TRUCK ENGINE
Disassembly and Assembly
Vibration Damper And Pulley
3406B DIESEL TRUCK ENGINE
Vibration Damper And Pulley
3406C DIESEL TRUCK ENGINE
Fan Drive
3406C DIESEL TRUCK ENGINE
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Truck Engine News
New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19
Separate Valve Stem Gauges Available
1982/06/23
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Cylinder Pack Puller Groups Improved
1992/12/01
Dynamometer Testing of Electronic Engines{1000}
1995/10/01
Engine News
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Installing the 7X1180 Internal Expansion Board in the 8T8697 ECAP Service Tool{0781, 0782}
Installing the 7X1180 Internal Expansion Board in the 8T8697 ECAP Service Tool{0781, 0782}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using the 7X1700 Communication Adapter Group{0781, 0782}
Using the 7X1700 Communication Adapter Group{0781, 0782}
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Truck Engine News
New 8T2998 Lubricant Available
1986/02/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance{1123,1100}
1994/06/24
New Valve Lifter Assembly Provide Improved Lubrication Of Lifter Roller And Camshaft Lobes{1209,1210}
1994/06/24
Engine News
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Specifications
Valve Covers
3406B DIESEL TRUCK ENGINE
Valve Rocker Arms, Lifters And Bridges
3406B DIESEL TRUCK ENGINE
Jake Brake
3406B DIESEL TRUCK ENGINE
Valve Covers
3406C DIESEL TRUCK ENGINE
Valve Rocker Arms, Lifters And Bridges
3406C DIESEL TRUCK ENGINE
Jake Brake
3406C DIESEL TRUCK ENGINE
Valve Covers
3406C DIESEL TRUCK ENGINE
Valve Rocker Arms, Lifters And Bridges
3406C DIESEL TRUCK ENGINE
Jake Brake
3406C DIESEL TRUCK ENGINE
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Valve Covers
3406B DIESEL TRUCK ENGINE
Rocker Shaft Assemblies And Push Rods
3406B DIESEL TRUCK ENGINE
Rocker Shaft Assemblies
3406B DIESEL TRUCK ENGINE
Valve Lifters
3406B DIESEL TRUCK ENGINE
Bridge Dowels
3406B DIESEL TRUCK ENGINE
Valve Covers
3406C DIESEL TRUCK ENGINE
Rocker Shaft Assemblies And Push Rods
3406C DIESEL TRUCK ENGINE
Rocker Shaft Assemblies
3406C DIESEL TRUCK ENGINE
Valve Lifters
3406C DIESEL TRUCK ENGINE
Bridge Dowels
3406C DIESEL TRUCK ENGINE
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

Caterpillar 3406C
 
Caterpillar 3406C
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
 
65,000 
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3406C, Stationary Generator Sets, Construction
43,000 
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3406 C, Industrial engines, Construction
42,500 
Caterpillar 3406 C, Industrial engines, Construction
- Industrial engines
RING POWER CORP.
Caterpillar 3406 C, Industrial engines, Construction
59,500 
Caterpillar 3406 C, Industrial engines, Construction
- Industrial engines
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.