AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-1910 LINES GP-TURBOCHARGER OIL S/N 3ZJ1-5695 FOR USE WITH MID MOUNTED TURBO 3406B TRUCK ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LUBRICATION SYSTEM
PUMP GP-ENGINE OIL
COOLING SYSTEM
COOLANT CONDITIONER GP

TRUCK ENGINE 3406B TRUCK ENGINE 3ZJ
 3406B Truck Engine 3ZJ00001-16181 SEBP1958 3406B 3ZJ   (1990)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
4N-2466 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4P-1909 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4P-1910 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4P-1910 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
9N-0013 LINES GP-TURBOCHARGER OIL
CARTRIDGE GP-TURBOCHARGER
4P-2063 CARTRIDGE GP-TURBOCHARGER
 

#SEBP19580550
 

4P-1910: LINES GP-TURBOCHARGER OIL

4P-1910 LINES GP-TURBOCHARGER OIL
S/N 3ZJ1-5695
FOR USE WITH MID MOUNTED TURBO
i00374263 SEBP1958
4P1910 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0699 [1] GASKET  
2. 4P-3397 [1] TUBE AS  
3. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
4. 4B-3388 [1] BOLT (5/16-18X1.125-IN)  
5. 8H-9788 [1] GASKET  
6. 1P-1255 [1] GASKET-OIL DRAIN  
7. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
8. 4P-3398 [1] TUBE AS  
9. 6K-3607 [1] CONNECTOR  
10. 2M-9780 [1] SEAL-O-RING  
11. 9M-4849 [1] SEAL-O-RING  
12. 4N-1041 [1] ELBOW  
13. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
 

#SEBP19580551
 

4P-1910: LINES GP-TURBOCHARGER OIL

4P-1910 LINES GP-TURBOCHARGER OIL
S/N 3ZJ5696-16181
FOR USE WITH MID MOUNTED TURBO
i00374265 SEBP1958
4P1910 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0699 [1] GASKET  
2. 4P-3397 [1] TUBE AS  
3. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
4. 4B-3388 [1] BOLT (5/16-18X1.125-IN)  
5. 8H-9788 [1] GASKET  
6. 061-7539 C [1] SEAL-O-RING  
7. 3B-1915 C [2] BOLT (3/8-16X1.375-IN)  
  5M-2894 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 4P-8957 C [1] TUBE AS-OIL DRAIN  
9. 6K-3607 [1] CONNECTOR  
10. 2M-9780 [1] SEAL-O-RING  
11. 9M-4849 [1] SEAL-O-RING  
12. 4N-1041 [1] ELBOW  
13. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19580552
 

9N-0013: LINES GP-TURBOCHARGER OIL

9N-0013 LINES GP-TURBOCHARGER OIL
FOR USE WITH REAR EXHAUST TURBO
ALSO AN ATTACHMENT
i00435586 SEBP1958
9N0013 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-6595 [1] GASKET-OIL SUPPLY  
2. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
3. 0S-1594 [2] BOLT (3/8-16X1-IN)  
4. 1S-4810 [1] GASKET-OIL DRAIN  
5. 9N-0696 [1] TUBE AS  
6. 9N-3258 C [1] TUBE AS-OIL  
7. 9M-4584 C [1] CONNECTOR  
8. 9M-4849 [1] SEAL-O-RING  
9. 9N-0694 [1] ELBOW  
10. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
11. 4N-0699 [1] GASKET  
12. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 2M-9780 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19580553
 

198-1508: PUMP GP-ENGINE OIL

198-1508 PUMP GP-ENGINE OIL
Type 1
FIELD REPLACEMENT FOR @@@@@ 4N-8735@@@@@
i01515586 SEBP1958
1981508 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0513 [1] BODY AS-OIL PUMP  
  7N-2156 [2] BUSHING  
  8M-8489 [2] DOWEL  
2. 1M-0644 [2] BOLT (3/8-16X2.25-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 5F-4899 [4] BOLT (3/8-16X5.5-IN)  
5. 9Y-1792 [1] RETAINER  
6. 2S-2760 [1] SPRING  
7. 6N-1931 [1] PLUNGER  
8. 162-2679 [1] SHAFT AS-PUMP  
9. 162-2682 [1] SHAFT AS-PUMP  
10. 4N-5339 [1] SPACER AS-OIL PUMP  
  7N-2155 [2] BUSHING  
11. 4N-0587 [1] BODY AS-PUMP  
  7N-2213 [2] BUSHING  
12. 7W-6529 [1] GEAR (8-TEETH)  
13. 7W-7142 [1] GEAR (8-TEETH)  
 

#SEBP19580554
 

198-1508: PUMP GP-ENGINE OIL

198-1508 PUMP GP-ENGINE OIL
Type 2
FIELD REPLACEMENT FOR @@@@@ 4N-8735@@@@@
i02085849 SEBP1958
1981508 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-2760 [1] SPRING  
2. 4N-5339 [1] SPACER AS-OIL PUMP  
  7N-2155 [1] BUSHING  
3. 6N-1931 [1] PLUNGER  
4. 6N-2343 C [1] BODY AS-PUMP  
5. 7W-6528 C [1] GEAR-PUMP (8-TEETH)  
6. 7W-7141 C [1] GEAR-PUMP (8-TEETH)  
7. 9Y-1792 [1] RETAINER  
8. 145-8503 C [1] SHAFT AS-IDLER  
9. 202-3572 C [1] SHAFT AS-DRIVE  
10. 235-1587 C [1] BODY AS  
10A. 8M-8489 [2] DOWEL  
10B. 2S-7905 [1] PLUG-PIPE  
10C. 7N-2156 [2] BUSHING  
11. 1M-0644 [2] BOLT (3/8-16X2.25-IN)  
13. 5F-4899 [4] BOLT (3/8-16X5.5-IN)  
14. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19580555
 

4N-0733: PUMP GP-ENGINE OIL

4N-0733 PUMP GP-ENGINE OIL
i00122070 SEBP1958
4N0733 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-7238 [1] SHAFT AS-PUMP DRIVE  
2. 1W-7239 [1] SHAFT AS-IDLER  
3. 2P-3205 [4] BOLT-WASHER HEAD (3/8-16X1.75-IN)  
4. 2S-2760 [1] SPRING  
5. 6N-1931 [1] PLUNGER  
6. 7C-6498 [1] COVER-OIL PUMP  
7. 9Y-1800 C [1] RETAINER  
8. 236-9918 [1] BODY AS  
8A. 8M-8489 C [2] DOWEL  
8B. 2S-7905 [1] PLUG-PIPE  
8C. 7N-2156 [2] BUSHING  
9. 1M-0644 [2] BOLT (3/8-16X2.25-IN)  
11. 5M-2894 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19580556
 

4N-8735: PUMP GP-ENGINE OIL

4N-8735 PUMP GP-ENGINE OIL
FIELD REPLACEMENT ORDER @@@@@198-1508@@@@@
i00371067 SEBP1958
4N8735 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 236-9918 [1] BODY AS  
  7N-2156 [2] BUSHING  
  2S-7905 [1] PLUG-PIPE  
2. 8M-8489 [2] DOWEL  
3. 4P-8891 [1] SHAFT AS-PUMP  
4. 4N-5339 [1] SPACER AS-OIL PUMP  
  4N-5341 [2] BUSHING  
5. 4N-5029 [2] GEAR (8-TEETH)  
6. 4N-0587 [1] BODY AS-PUMP  
  4N-5274 [2] BUSHING  
7. 6N-1931 [1] PLUNGER  
8. 4P-8892 [1] SHAFT AS-PUMP  
9. 2S-2760 [1] SPRING  
10. 9Y-1792 C [1] RETAINER  
11. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 1M-0644 [2] BOLT (3/8-16X2.25-IN)  
13. 5F-4899 [4] BOLT (3/8-16X5.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19580557
 

4W-2889: COOLANT CONDITIONER GP

4W-2889 COOLANT CONDITIONER GP
LEFT SIDE MOUNT
ALSO AN ATTACHMENT
i00378896 SEBP1958
4W2889 COOLANT CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-8559 [1] TEE-SERVICE  
2. 6B-4661 [1] BUSHING-REDUCER  
3. 030-0709 [2] FITTING (45-DEG ELBOW)  
4. 5P-4961 [4] CLAMP-HOSE  
5. 6V-8523 CE HOSE (156CM)  
5A. 6V-8523 CE HOSE (78.5CM)  
6. 5K-9592 [1] ANGLE  
7. 8M-2773 [1] CLIP (LOOP)  
8. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
9. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
11. 2N-3378 [1] ELBOW-FLARED  
12. 2R-8613 [1] ADAPTER-HOSE  
13. 2B-2694 B [1] BOLT (5/16-18X2-IN)  
14. 9M-1974 B [1] WASHER-HARD (8.8X16X2-MM THK)  
15. 5B-8978 [1] TEE  
16. 002-9370 [1] CLIP  
17. 003-2143 [1] ELBOW  
18. 1L-2279 [1] ELBOW  
19. 9N-3666 [2] VALVE-MANUAL (COOLANT CONDITIONER)  
20. 006-5490 [1] ELBOW  
21. 435-5142 J [1] FILTER (COOLANT)  
    (MAINTENANCE) (FOR ROUTINE REPLACEMENT SYSTEM NOT DRAINED)
22. 8T-6767 [2] PLUG-PIPE (3/8-18-THD)  
23. 9N-3668 [1] BASE AS  
23A. 9N-3645 [1] STUD-TAPERLOCK  
24. 0S-1616 [1] BOLT (1/4-20X1-IN)  
25. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
26. 0S-1594 [2] BOLT (3/8-16X1-IN)  
27. 7C-7264 C [1] PLATE AS  
  9F-2978 C [2] NUT-WELD (3/8-16-THD)  
28. 1A-2029 [1] BOLT (3/8-16X1.125-IN)  
29. 6B-0933 [2] SPACER (10.31X19.05X6.35-MM THK)  
30. 3S-2093 B [2] STRAP-CABLE  
32. 8M-2773 B [1] CLIP (LOOP)  
33. 6J-0488 [1] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REFER TO CHART FOR COOLANT CONDITIONER INFORMATION
 

#SEBP19580558
 

4W-7337: COOLANT CONDITIONER GP

4W-7337 COOLANT CONDITIONER GP
i00380190 SEBP1958
4W7337 COOLANT CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
2. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 3J-5390 [2] PLUG (3/8-18-THD)  
4. 0S-1594 [2] BOLT (3/8-16X1-IN)  
5. 1B-9575 [1] BOLT (5/16-18X1.56-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 4W-7626 C [1] PLATE AS  
7. 032-3237 [1] SPACER (10.93X19.05X25.4-MM THK)  
8. 8M-2773 [1] CLIP (LOOP)  
9. 1N-8559 [1] TEE-SERVICE  
10. 6B-4661 [2] BUSHING-REDUCER  
11. 9N-3666 [2] VALVE-MANUAL (COOLANT CONDITIONER)  
12. 101-2840 E HOSE (62.5CM)  
13. 109-1145 [4] CLAMP-HOSE  
14. 030-0709 [4] FITTING (45-DEG ELBOW)  
15. 101-2840 E HOSE (30.8CM)  
16. 9N-3366 J [1] FILTER-COOLANT CONDITIONER (PRECHARGE)  
    -OR-
  9N-3717 A [1] FILTER-COOLANT CONDITIONER  
17. 9N-3668 [1] BASE AS  
18. 9N-3645 [1] STUD-TAPERLOCK  
19. 4W-7627 [1] SPACER (11X19X37-MM THK)  
20. 9M-4136 C [1] SPACER (0.438X0.75X0.5-IN THK)  
21. 0S-1591 C [1] BOLT (3/8-16X1.5-IN)  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REFER TO CHART FOR COOLANT CONDITIONER INFORMATION
 

#SEBP19580559
 

7W-5638: COOLANT CONDITIONER GP

7W-5638 COOLANT CONDITIONER GP
FOR USE WITH RIGHT HAND MOUNTED COOLANT CONDITIONER
AN ATTACHMENT
i00413481 SEBP1958
7W5638 COOLANT CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
2. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 3J-5390 [2] PLUG (3/8-18-THD)  
4. 0S-1594 [2] BOLT (3/8-16X1-IN)  
5. 1B-9575 [1] BOLT (5/16-18X1.56-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 4W-7626 [1] PLATE AS  
7. 032-3237 [1] SPACER (10.93X19.05X25.4-MM THK)  
8. 8M-2773 [1] CLIP (LOOP)  
9. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
10. 6B-4661 [2] BUSHING-REDUCER  
11. 9N-3666 [2] VALVE-MANUAL (COOLANT CONDITIONER)  
12. 101-2840 E HOSE (62.5CM)  
13. 109-1145 [4] CLAMP-HOSE  
14. 030-0709 [4] FITTING (45-DEG ELBOW)  
15. 101-2840 E HOSE (30.8CM)  
16. 9N-3366 J [1] FILTER-COOLANT CONDITIONER (PRECHARGE)  
    -OR-
  9N-3717 A [1] FILTER-COOLANT CONDITIONER (MAINTENANCE)  
17. 9N-3668 [1] BASE AS  
18. 9N-3645 [1] STUD-TAPERLOCK  
19. 4W-7627 [1] SPACER (11X19X37-MM THK)  
20. 9M-4136 [1] SPACER (0.438X0.75X0.5-IN THK)  
  A   NOT PART OF THIS GROUP
  E   ORDER BY THE CENTIMETER
  J   REFER TO CHART FOR COOLANT CONDITIONER INFORMATION
 

Information:

Truck Engine News
New Turbocharger, Turbocharger Oil Lines Group And Aftercooler Air Lines Group Used
1981/03/06
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
3406 Truck Engine Component Update
1992/10/01
Service Tips For Effective Repair Of Failed Turbochargers
1993/04/01
Baffles Available To Help Reduce Turbocharger Noise
1993/05/01
Turbocharger Popping Noise Does Not Cause Damage{1052}
1994/09/01
Tampering With Turbocharger Wastegate{1057,1052}
1995/04/01
Evaluating Turbochargers For Compressor End Oil Seal Leaks{1052,1053,1060}
1995/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/01
Policy for the Reuse of the Turbocharger Turbine Housing {1065}
2003/06/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/10/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/01
Packaging the Turbocharger {1052}
2007/03/01
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/01
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Letter-NACD
0R5368, 0R5381, 0R5535, 0R5597, 0R5731, 0R5732, 0R5733, 0R5964, 0R6053, 0R6054, 0R6055, AND 0R6056 REMANUFACTURED TURBOCHARGERS NEED TO BE REMOVED FROM DEALER PARTS STOCK
0R5368, 0R5381, 0R5535, 0R5597, 0R5731, 0R5732, 0R5733, 0R5964, 0R6053, 0R6054, 0R6055, AND 0R6056 REMANUFACTURED TURBOCHARGERS NEED TO BE REMOVED FROM DEALER PARTS STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Turbocharger Impeller Installation
3406B DIESEL TRUCK ENGINE
Turbocharger
3406B DIESEL TRUCK ENGINE
Turbochargers
3406C DIESEL TRUCK ENGINE
Turbochargers
3406C DIESEL TRUCK ENGINE
Service Letter-China
0R5368, 0R5381, 0R5535, 0R5597, 0R5731, 0R5732, 0R5733, 0R5964, 0R6053, 0R6054, 0R6055, AND 0R6056 REMANUFACTURED TURBOCHARGERS NEED TO BE REMOVED FROM DEALER PARTS STOCK
0R5368, 0R5381, 0R5535, 0R5597, 0R5731, 0R5732, 0R5733, 0R5964, 0R6053, 0R6054, 0R6055, AND 0R6056 REMANUFACTURED TURBOCHARGERS NEED TO BE REMOVED FROM DEALER PARTS STOCK
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGER TURBINE HOUSINGS.
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGER TURBINE HOUSINGS.
Service Letter-APD
0R5368, 0R5381, 0R5535, 0R5597, 0R5731, 0R5732, 0R5733, 0R5964, 0R6053, 0R6054, 0R6055, AND 0R6056 REMANUFACTURED TURBOCHARGERS NEED TO BE REMOVED FROM DEALER PARTS STOCK
0R5368, 0R5381, 0R5535, 0R5597, 0R5731, 0R5732, 0R5733, 0R5964, 0R6053, 0R6054, 0R6055, AND 0R6056 REMANUFACTURED TURBOCHARGERS NEED TO BE REMOVED FROM DEALER PARTS STOCK
Disassembly and Assembly
Turbocharger (TV72 & TV78)
3406B DIESEL TRUCK ENGINE
Turbocharger (S4A)
3406B DIESEL TRUCK ENGINE
Turbocharger (Earlier)
3406C DIESEL TRUCK ENGINE
Turbocharger (Later)
3406C DIESEL TRUCK ENGINE
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
Service Tips For Effective Repair Of Failed Turbochargers{1052,1063,1059}
1993/05/10
Baffles Available To Help Reduce Turbocharger Noise {1052,1058}
1993/05/17
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3406B :

LINES GP-TURBOCHARGER OIL
4P-1909 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4N-2466 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
114-1917 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
114-1917 LINES GP-TURBOCHARGER OIL
LINES GP-ENGINE OIL
9Y-4655 LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
9N-0669 LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
9N-0666 LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
7W-9010 LINES GP-ENGINE OIL
LINES GP-TURBOCHARGER OIL
4P-1910 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
9N-0013 LINES GP-TURBOCHARGER OIL
PUMP GP-ENGINE OIL
198-1508 PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
198-1508 PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
4N-0733 PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
4N-8735 PUMP GP-ENGINE OIL
COOLANT CONDITIONER GP
4W-2889 COOLANT CONDITIONER GP
COOLANT CONDITIONER GP
4W-7337 COOLANT CONDITIONER GP

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.