AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W-7376 FASTENER GP-FUEL INJ PUMP -ENGINE 3406B TRUCK ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
LINES GP-FUEL
GOVERNOR GP
FUEL SYSTEM GP
FILTER GP-FUEL

TRUCK ENGINE 3406B TRUCK ENGINE 3ZJ
 3406B Truck Engine 3ZJ00001-16181 SEBP1958 3406B 3ZJ   (1990)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
DRIVE GP-GOVERNOR & FUEL PUMP
6I-3062 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
9Y-5395 DRIVE GP-GOVERNOR & FUEL PUMP
FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
9Y-4913 FASTENER GP-FUEL INJ PUMP
PROTECTION GP-FUEL SYSTEM
7W-6074 PROTECTION GP-FUEL SYSTEM
PROTECTION GP-FUEL SYSTEM
9Y-5506 PROTECTION GP-FUEL SYSTEM
 

#SEBP19580650
 

1W-7376: FASTENER GP-FUEL INJ PUMP

1W-7376 FASTENER GP-FUEL INJ PUMP -ENGINE
i00121991 SEBP1958
1W7376 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
2. 5P-0076 [1] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
3. 034-4288 [2] BOLT-12 POINT HEAD (3/8-16X1.125-IN)  
4. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
5. 6V-3319 [1] SEAL-O-RING  
6. 5P-5846 [1] SEAL-O-RING  
7. 2N-3350 [1] SEAL-O-RING  
8. 1C-2251 [1] BOLT (3/8-16X1.87-IN)  
 

#SEBP19580651
 

9Y-4913: FASTENER GP-FUEL INJ PUMP

9Y-4913 FASTENER GP-FUEL INJ PUMP -GOVERNOR
PART OF 4P-1370, 4P-1371, 4P-1387, 4P-1388, 4P-1389, 4P-1390, 4P-1391, 4P-1397, 4P-1398, 4P-1402, 4P-2044, 4P-2045, 4P-2046, 4P-5922, 6I-3058, 6I-3060, 7C-6651 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00122914 SEBP1958
9Y4913 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5894 [4] BOLT (1/4-20X3.75-IN)  
2. 7B-2742 [2] BOLT (1/4-20X1.25-IN)  
3. 8S-4710 [4] BOLT (1/4-20X4-IN)  
4. 1B-2716 [2] BOLT (1/4-20X5-IN)  
5. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
6. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
7. 7X-0869 [1] BOLT-LOCKING (1/4-20X2-IN)  
8. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
 

#SEBP19580652
 

144-0829: FILTER GP-FUEL

144-0829 FILTER GP-FUEL
FOR USE WITH HEAVY DUTY PRIMING PUMP
AN ATTACHMENT
i00760228 SEBP1958
1440829 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
2. 1N-3789 [1] BASE AS-FILTER  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
3. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
4. 1R-0749 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
5. 137-5541 [1] PUMP GP-FUEL PRIMING  
6. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 6V-5048 [1] SEAL-O-RING  
8. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
9. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 9S-4182 [1] PLUG (7/16-20-THD)  
11. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 0S-1594 [2] BOLT (3/8-16X1-IN)  
 

#SEBP19580653
 

4N-1981: FILTER GP-FUEL

4N-1981 FILTER GP-FUEL -ENGINE
i00107917 SEBP1958
4N1981 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3789 C [1] BASE AS-FILTER (FUEL)  
2. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
3. 1R-0749 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19580654
 

8H-7204: FILTER GP-FUEL

8H-7204 FILTER GP-FUEL
PRIMARY
AN ATTACHMENT
i00108873 SEBP1958
8H7204 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3583 C [1] BASE-FUEL FILTER  
2. 7N-1628 C [1] NUT (3/8-24-THD)  
3. 2J-0157 C [1] SEAL-O-RING  
4. 1L-3769 [1] RING-RETAINING  
5. 7H-9678 [1] RETAINER-ELEMENT  
6. 2H-3429 [1] RING-RETAINING  
7. 7S-9323 [1] SPRING  
8. 8H-7202 [1] CASE AS-FUEL FILTER  
9. 9M-2342 [1] FILTER ELEMENT-FUEL (PRIMARY)  
10. 8H-2778 [1] SEAL-RING (FUEL FILTER BASE)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19580655
 

7W-6973: FITTING GP-FUEL LINES

7W-6973 FITTING GP-FUEL LINES
FOR USE WITH A PROVIDED 3/8 NPTF FUEL RETURN CONNECTION FOR CUSTOMER INTERFACE
AN ATTACHMENT
i00414952 SEBP1958
7W6973 FITTING GP-FUEL LINES Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5049 [1] SEAL-O-RING  
2. 9J-6190 [1] UNION-ADAPTER  
3. 1W-3151 [1] ELBOW  
 

#SEBP19580656
 

1N-3110: GOVERNOR GP

1N-3110 GOVERNOR GP
PART OF 4P-1370, 4P-1387, 4P-1388, 4P-1389, 4P-1390, 4P-1391, 4P-1397, 4P-1398, 4P-1402, 4P-2045, 4P-2046, 4P-5922, 6I-3058, 6I-3060, 7C-6651 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00168431 SEBP1958
1N3110 GOVERNOR GP Parts scheme 1N3110 GOVERNOR GP Parts scheme 1N3110 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4272 C [1] NUT-SEALING (5/16-18-THD)  
2. 8L-5832 [1] NUT-HEX (10-32-THD)  
3. 9Y-4701 [1] SETSCREW-SOCKET (10-32X1.38-IN)  
4. 8N-3956 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
5. 1W-4243 [1] SPRING-BUMPER  
6. 7W-5836 C [1] BOLT AS-SPECIAL (STOP)  
7. 6D-3897 [1] BOLT (8-32X0.5-IN)  
8. 6L-5551 [2] BOLT-SOCKET HEAD (1/4-20X2.25-IN)  
9. 4N-8445 [1] BOLT (1/4-20X1.25-IN)  
10. 7N-2594 [1] SETSCREW-SLOTTED  
11. 1N-3935 [1] COVER  
  144-0479 [1] GASKET-COVER (IDLE-SPEED ADJ)  
12. 3P-0009 [1] INSULATOR  
13. 6V-5029 [1] SEAL-LIP TYPE  
14. 8N-3762 [1] COVER  
  144-0478 [1] GASKET  
15. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
16. 9S-8003 [2] PLUG (1/2-20-THD)  
  1J-9671 [2] SEAL-O-RING  
17. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
18. 5B-3180 [1] NUT (5/16-18-THD)  
19. 2M-7819 [2] RING-RETAINING  
20. 4N-0432 [1] BALL BEARING  
21. 2W-2216 [1] SPRING-LINK  
22. 1N-3800 [1] SLEEVE-RACK CONTROL  
23. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
24. 8N-9678 [1] PISTON GP-GOVERNOR SERVO  
  7C-0790 C [1] CYLINDER AS  
  8N-3757 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7W-0250 [1] SLEEVE  
25. 5P-9757 [1] SEAL-O-RING  
26. 1W-4098 [1] PISTON-GOVERNOR SERVO  
27. 1N-3802 [1] SEAT-SPRING  
28. 1S-5440 [4] DOWEL  
29. 7M-7219 [1] BEARING-THRUST  
30. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
31. 4N-9019 [1] DOWEL  
32. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
33. 4N-2953 [1] RING-LOCK  
34. 133-8890 [2] RACE-NEEDLE BEARING  
35. 7E-3986 C [1] CARRIER-WEIGHT  
36. 119-8699 [4] WEIGHT-GOVERNOR  
37. 3K-5733 [1] SPRING  
38. 8N-9680 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (LONG)  
  4F-6024 [2] PIN (SHORT)  
39. 4W-6868 C [1] RISER-GOVERNOR  
40. 7N-7270 [2] SLEEVE-SPRING  
41. 7W-4068 [1] ACTUATOR AS-GOVERNOR  
  7W-4067 [1] SPRING  
  7N-7268 [1] SEAT-SPRING  
  1N-3861 [1] SHIELD-GOVERNOR SPRING  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
  4N-6404 [1] RING-RETAINING  
42. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
  2N-0828 [2] WASHER  
43. 6N-3504 [1] SEAT-GOVERNOR SPRING  
44. 7N-8821 [2] RING-RETAINING  
45. 1W-5342 [1] LEVER-SHUTOFF  
46. 4W-5735 [1] LEVER AS-PIVOT  
47. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  4B-2049 [1] NUT (10-32-THD)  
48. 4W-5734 [1] LEVER AS  
49. 6V-6835 BC [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 BC [1] NUT-HEX (10-32-THD)  
50. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
51. 4N-5621 [1] SHAFT-SHUTOFF  
52. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
53. 8N-3760 [1] COVER  
  8N-3761 [1] GASKET  
  030-9615 [4] SCREW-NYLOK  
54. 7W-7545 C [1] HOUSING AS-GOVERNOR  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
55. 8N-2499 [1] SPRING-GUIDE  
56. 3D-8317 [1] RING-RETAINING  
57. 4N-0260 [1] SEAL-LIP TYPE  
58. 138-9507 [1] SEAL-LIP TYPE  
59. 8N-3945 [1] BUSHING-TERMINAL  
60. 4N-5484 [1] VALVE-NEEDLE  
  6H-9691 [1] SEAL-O-RING  
61. 144-0480 [1] GASKET  
62. 5H-2532 [1] KEY-WOODRUFF  
63. 2W-6102 [1] LEVER-SPRING SEAT  
64. 1W-3962 [1] SPACER (6.75X14X10-MM THK)  
65. 1W-5337 [1] SHAFT AS-CONTROL  
66. 2M-7819 [1] RING-RETAINING  
67. 2W-0800 [1] LEVER-SHUTOFF  
68. 2W-0799 [1] SPRING-SHUTOFF  
69. 2W-0801 [1] SHAFT  
70. 8S-7803 [1] RING-RETAINING  
71. 1W-3961 [1] SPACER (6.75X14X13-MM THK)  
72. 7W-4182 [1] BODY-VALVE  
  5F-9144 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19580657
 

9Y-5633: GOVERNOR GP

9Y-5633 GOVERNOR GP
PART OF 4P-1371, 4P-2044 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00444068 SEBP1958
9Y5633 GOVERNOR GP Parts scheme 9Y5633 GOVERNOR GP Parts scheme 9Y5633 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4272 [1] NUT-SEALING (5/16-18-THD)  
2. 8L-5832 [1] NUT-HEX (10-32-THD)  
3. 9Y-4701 C [1] SETSCREW-SOCKET (10-32X1.38-IN)  
4. 8N-3956 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
5. 1W-4243 [1] SPRING-BUMPER  
6. 7W-5836 [1] BOLT AS-SPECIAL (STOP)  
7. 6D-3897 [1] BOLT (8-32X0.5-IN)  
8. 6L-5551 [2] BOLT-SOCKET HEAD (1/4-20X2.25-IN)  
9. 2A-5546 [1] BOLT (1/4-20X1.375-IN)  
10. 7N-2594 [1] SETSCREW-SLOTTED  
11. 9Y-5505 [1] COVER  
  144-0479 [1] GASKET-COVER (IDLE-SPEED ADJ)  
12. 3P-0009 [1] INSULATOR  
13. 8N-3256 [1] COLLAR-LOAD STOP  
14. 8N-3762 [1] COVER  
  144-0478 [1] GASKET  
15. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
16. 9S-8003 [2] PLUG (1/2-20-THD)  
  1J-9671 [2] SEAL-O-RING  
17. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
18. 5B-3180 [1] NUT (5/16-18-THD)  
19. 2M-7819 [2] RING-RETAINING  
20. 4N-0432 [1] BALL BEARING  
21. 2W-2216 [1] SPRING-LINK  
22. 1N-3800 [1] SLEEVE-RACK CONTROL  
23. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
24. 8N-9678 [1] PISTON GP-GOVERNOR SERVO  
  7C-0790 [1] CYLINDER AS  
  8N-3757 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7W-0250 [1] SLEEVE  
25. 5P-9757 [1] SEAL-O-RING  
26. 1W-4098 [1] PISTON-GOVERNOR SERVO  
27. 1N-3802 [1] SEAT-SPRING  
28. 1S-5440 [4] DOWEL  
29. 7M-7219 [1] BEARING-THRUST  
30. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
31. 4N-9019 [1] DOWEL  
32. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
33. 4N-2953 [1] RING-LOCK  
34. 133-8890 [2] RACE-NEEDLE BEARING  
35. 7E-3986 [1] CARRIER-WEIGHT  
36. 119-8699 [4] WEIGHT-GOVERNOR  
37. 3K-5733 [1] SPRING  
38. 8N-9680 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (LONG)  
  4F-6024 [2] PIN (SHORT)  
39. 4W-6868 [1] RISER-GOVERNOR  
40. 7N-7270 [2] SLEEVE-SPRING  
41. 7W-4068 [1] ACTUATOR AS-GOVERNOR  
  7W-4882 [1] SPRING-DASHPOT  
  7N-7268 [1] SEAT-SPRING  
  1N-3861 [1] SHIELD-GOVERNOR SPRING  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
  4N-6404 [1] RING-RETAINING  
42. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
  2N-0828 [2] WASHER (SPRING)  
43. 6N-3504 [1] SEAT-GOVERNOR SPRING  
44. 7N-8821 [2] RING-RETAINING  
45. 1W-5342 [1] LEVER-SHUTOFF  
46. 4W-5735 [1] LEVER AS-PIVOT  
47. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
48. 4W-5734 [1] LEVER AS  
49. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
50. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
51. 4N-5621 [1] SHAFT-SHUTOFF  
52. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
53. 8N-3760 [1] COVER  
  8N-3761 [1] GASKET  
  030-9615 [4] SCREW-NYLOK  
54. 7W-7545 [1] HOUSING AS-GOVERNOR  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
55. 8N-2499 [1] SPRING-GUIDE  
56. 3D-8317 [1] RING-RETAINING  
57. 4N-0260 [1] SEAL-LIP TYPE  
58. 138-9507 [1] SEAL-LIP TYPE  
59. 8N-3945 [1] BUSHING-TERMINAL  
60. 4N-5484 [1] VALVE-NEEDLE  
  6H-9691 [1] SEAL-O-RING  
61. 144-0480 [1] GASKET  
62. 5H-2532 [1] KEY-WOODRUFF  
63. 2W-6102 [1] LEVER-SPRING SEAT  
64. 1W-3962 [1] SPACER (6.75X14X10-MM THK)  
65. 1W-5337 [1] SHAFT AS-CONTROL  
66. 2M-7819 [1] RING-RETAINING  
67. 2W-0800 [1] LEVER-SHUTOFF  
68. 2W-0799 [1] SPRING-SHUTOFF  
69. 2W-0801 [1] SHAFT  
70. 8S-7803 [1] RING-RETAINING  
71. 1W-3961 [1] SPACER (6.75X14X13-MM THK)  
72. 7W-4182 [1] BODY-VALVE  
  5F-9144 [1] SEAL-O-RING  
73. 6V-5029 [1] SEAL-LIP TYPE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19580658
 

425-6886: KIT-FUEL SYSTEM GASKET

425-6886 KIT-FUEL SYSTEM GASKET
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL ENGINE MOUNTED FUEL SYSTEM COMPONENETS. KIT DOES NOT INCLUDE INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED
FIELD REPLACEMENT FOR @@@@@ 3E-3310@@@@@
i05351497 SEBP1958
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
  6I-2002 [1] GASKET  
  8N-3761 [1] GASKET  
  144-0478 [1] GASKET  
  144-0480 [1] GASKET  
  144-0481 [1] GASKET  
  144-0482 [1] GASKET  
  8N-3776 [1] GASKET-COVER (GOVERNOR DETENT)  
  144-0479 [1] GASKET-COVER (IDLE-SPEED ADJ)  
  4N-0260 [1] SEAL-LIP TYPE  
  138-9507 [1] SEAL-LIP TYPE  
  1J-9671 [1] SEAL-O-RING  
  2N-3350 [1] SEAL-O-RING  
  3J-7354 [2] SEAL-O-RING  
  4J-8997 [1] SEAL-O-RING  
  5P-5846 [1] SEAL-O-RING  
  5P-7813 [2] SEAL-O-RING  
  6V-3319 [1] SEAL-O-RING  
  8J-4351 [2] SEAL-O-RING  
  464-0509 [6] SEAL-O-RING  
  214-7567 [1] SEAL-O-RING  
  238-5078 [1] SEAL-O-RING  
  203-3940 [6] SEAL-O-RING  
  131-3719 [6] SEAL-O-RING  
  214-7566 [1] SEAL-O-RING  
  214-7568 [9] SEAL-O-RING  
  238-5081 [1] SEAL-O-RING  
  8H-2778 [1] SEAL-RING  
  8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
   
    FOR A LIST OR RELATED PARTS THAT ARE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTPS://DEALER.CAT.COM/RELATED
 

#SEBP19580659
 

4W-0167: LINES GP-FUEL FILTER

4W-0167 LINES GP-FUEL FILTER
ALSO AN ATTACHMENT
i00168572 SEBP1958
4W0167 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-7947 [2] ADAPTER-ELBOW  
2. 2R-6806 [1] CONNECTOR  
3. 6V-5049 [6] SEAL-O-RING  
4. 7W-6158 I [1] HOSE AS  
5. 9N-5279 I [1] HOSE AS  
6. 4V-6698 [1] SPACER (10X16X16-MM THK)  
7. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
8. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
9. 297-1546 [2] CLIP  
10. 6V-5048 [1] SEAL-O-RING  
11. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 117-6482 [1] ELBOW  
13. 2M-4779 [2] STUD-TAPERLOCK (3/8-16X1.75-IN)  
14. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
15. 9S-4182 [1] PLUG (7/16-20-THD)  
16. 8T-2161 [1] ELBOW  
17. 2P-7214 [1] ADAPTER-ELBOW  
18. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
19. 3S-2093 [1] STRAP-CABLE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

Information:

Truck Engine News
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Do Not Use A Wire Brush On Fuel Nozzles
1982/09/29
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
New 8T2998 Lubricant Available
1986/02/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Improved Locknut In Timing Advance On Fuel Pump And Governor Drive Group
1988/07/01
Fuel Injection Pump Bushing Torque Increased
1991/04/01
Fuel Nozzle Orifice Erosion
1991/08/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1991/09/01
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly.
1992/09/01
3406 Truck Engine Component Update
1992/10/01
New Bushing Used In Fuel Injection Pump Groups
1993/03/01
Summery Of Changes To Timing Advance Drive Groups
1993/05/01
New Bonnet Used In Fuel Injection Pump Group
1993/06/01
Fuel Injection Pump Improvements{1251}
1994/01/01
Fuel Injection Pump Improvements{1251}
1994/04/22
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles {1254}
1994/05/31
Procedure For Lapping Sealing Surfaces Of Fuel Injection Pump Barrels And Bonnets{1251}
1994/06/24
Fuel Injection Nozzle Spray Orifice Plugging{1254}
1994/07/01
Changing Complete Sets Of Fuel Injection Pump Groups May Not Fix Low Power Problems{1251}
1994/08/30
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance{1251}
1994/09/01
Fuel Injection Nozzle Reference {1254}
1994/11/01
Governors Now Use New Low Mass Weight Carrier{1272}
1995/03/01
Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/27
Fuel Injection Nozzle Reference {1254}
1996/03/27
New O-Ring Seals Used On "Through-Head-Adapter" And "Internal Fuel Lines" In Fuel Injection Lines Groups{1252}
1996/10/01
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24
Summary Of Changes To Timing Advance Drive Groups (Update){1272}
1997/02/24
New Fuel Line Support Brackets Help Eliminate Vibration{1252}
1997/11/18
Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2006/06/01
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2007/08/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain On-Highway Truck Engines {1251, 1290}
2012/07/09
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain On-Highway Truck Engines {1250, 1251, 1290, 1713}
2013/10/29
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
Product Support Program For Replacing The Fuel Injector Nozzles On Certain 3406C Engines Rated At 415 Or 425 Horsepower
Product Support Program For Replacing The Fuel Injector Nozzles On Certain 3406C Engines Rated At 415 Or 425 Horsepower
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Low Power Complants/Fuel Flow Rates May Be Reduced
Low Power Complants/Fuel Flow Rates May Be Reduced
Valve Bonnets with Insufficient Hardness
Valve Bonnets with Insufficient Hardness
Specifications
Fuel Injection Nozzle And Adapter (Earlier)
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzle And Adapter (Later)
3406B DIESEL TRUCK ENGINE
Fuel Transfer Pump
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump<BR> Engines With Serial Numbers 7FB1-Up, 4MG1-Up, And 5KJ1-Up
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump<BR> Engines With Serial Numbers 3ZJ1-Up
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE
Governor
3406B DIESEL TRUCK ENGINE
Governor Control Linkage
3406B DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group (Earlier)<BR> (Automatic Timing Advance Unit)
3406B DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group (Later)<BR> (Automatic Timing Advance Unit)
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzle And Adapter
3406C DIESEL TRUCK ENGINE
Fuel Transfer Pump
3406C DIESEL TRUCK ENGINE
Fuel Injection Pump
3406C DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406C DIESEL TRUCK ENGINE
Governor
3406C DIESEL TRUCK ENGINE
Governor Control Linkage
3406C DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group (4W4619 Only)(Automatic Timing Advance Unit)
3406C DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group (Automatic Timing Advance Unit)
3406C DIESEL TRUCK ENGINE
Fuel System Identification
3406C DIESEL TRUCK ENGINE
Fuel Injection Nozzle And Adapter
3406C DIESEL TRUCK ENGINE
Fuel Transfer Pump
3406C DIESEL TRUCK ENGINE
Fuel Injection Pump
3406C DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406C DIESEL TRUCK ENGINE
Governor
3406C DIESEL TRUCK ENGINE
Governor Control Linkage
3406C DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group<BR> (4W4619 Only)(Automatic Timing Advance Unit)
3406C DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group<BR> (Automatic Timing Advance Unit)
3406C DIESEL TRUCK ENGINE
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Line Adapters
3406B DIESEL TRUCK ENGINE
Fuel Transfer Pump
3406B DIESEL TRUCK ENGINE
Automatic Timing Advance 7FB1-Up, 4MG1-4MG3599
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing And Governor
3406B DIESEL TRUCK ENGINE
Governor
3406B DIESEL TRUCK ENGINE
Fuel Injection Pumps
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE
Rocker Shaft Assemblies
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzles (Earlier)
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzle Adapters (Earlier)
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzles And Adapters (Later)
3406B DIESEL TRUCK ENGINE
Fuel Injection Line Adapters
3406C DIESEL TRUCK ENGINE
Fuel Transfer Pump
3406C DIESEL TRUCK ENGINE
Automatic Timing Advance
3406C DIESEL TRUCK ENGINE
Fuel Injection Pump Housing And Governor
3406C DIESEL TRUCK ENGINE
Governor
3406C DIESEL TRUCK ENGINE
Fuel Injection Pumps
3406C DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406C DIESEL TRUCK ENGINE
Rocker Shaft Assemblies And Push Rods
3406C DIESEL TRUCK ENGINE
Rocker Shaft Assemblies
3406C DIESEL TRUCK ENGINE
Fuel Injection Nozzles And Adapters
3406C DIESEL TRUCK ENGINE
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Fuel Nozzle Orifice Erosion{1254,1250}
1991/09/02
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/24
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
New Bushing Used In Fuel Injection Pump Groups{1251}
1993/03/22
Summary Of Changes To Timing Advance Drive Groups{1272}
1993/05/24
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Fuel Injection Pump Improvements{1251}
1994/02/07
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/08

Caterpillar Parts SIS Catalog 3406B :

DRIVE GP-TACHOMETER
1W-9010 DRIVE GP-TACHOMETER
DRIVE GP-GOVERNOR & FUEL PUMP
9Y-5395 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
6I-3062 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
6I-3059 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
6I-3057 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
6I-3055 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
4P-1925 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
4P-1923 DRIVE GP-GOVERNOR & FUEL PUMP
FASTENER GP-FUEL INJ PUMP
9Y-4913 FASTENER GP-FUEL INJ PUMP
FILTER GP-FUEL
144-0829 FILTER GP-FUEL
FILTER GP-FUEL
4N-1981 FILTER GP-FUEL
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
FITTING GP-FUEL LINES
7W-6973 FITTING GP-FUEL LINES
GOVERNOR GP
1N-3110 GOVERNOR GP
GOVERNOR GP
9Y-5633 GOVERNOR GP
425-6886 KIT-FUEL SYSTEM GASKET

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.