AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-1356 PUMP GP-FUEL INJECTION PART OF 4P-1389, 4P-1390, 4P-1397 PUMP GP-GOV & FUEL INJ AN ATTACHMENT 3406B


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING

TRUCK ENGINE 3406B TRUCK ENGINE 3ZJ
 3406B Truck Engine 3ZJ00001-16181 SEBP1958 3406B 3ZJ   (1990)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1356 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1356 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1356 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1357 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1378 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1378 PUMP GP-FUEL INJECTION
 

#SEBP19580690
 

4P-1356: PUMP GP-FUEL INJECTION

4P-1356 PUMP GP-FUEL INJECTION
PART OF 4P-1389, 4P-1390, 4P-1397 PUMP GP-GOV & FUEL INJ
AN ATTACHMENT
i00373313 SEBP1958
4P1356 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5887 [1] HOUSING GP-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 7E-6002 [1] BUSHING (REAR)  
5. 7E-6003 [1] BUSHING (CENTER)  
6. 7E-6004 [1] BUSHING (FRONT)  
7. 8N-0654 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG  
13. 4J-7533 [1] SEAL-O-RING  
14. 8E-5237 [2] RACE-THRUST BEARING  
15. 7L-3326 [1] BEARING-THRUST  
16. 9N-1545 [2] RACE-THRUST BEARING  
17. 3S-8022 [1] BEARING-THRUST  
18. 4P-2948 [1] RING-GUIDE  
19. 4P-1361 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT (1/4-20X0.875-IN)  
22. 1H-9696 [2] SEAL-O-RING  
23. 4P-2899 [6] BUSHING-TERMINAL  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT (1/4-20X0.75-IN)  
28. 9S-4182 [2] PLUG (7/16-20-THD)  
29. 7E-4847 [6] SEAL-O-RING  
30. 6I-2665 Y [6] PUMP GP-FUEL INJECTION  
31. 1J-9671 [1] SEAL-O-RING  
32. 9S-8003 [1] PLUG (1/2-20-THD)  
33. 7J-0204 [2] SEAL-O-RING  
34. 9S-8007 [2] PLUG  
35. 7E-6011 [6] LIFTER AS  
36. 7E-9907 [6] SPACER (34.8X42.125X6.76-MM THK)  
37. 1W-5785 [1] COVER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19580691
 

4P-1357: PUMP GP-FUEL INJECTION

4P-1357 PUMP GP-FUEL INJECTION
PART OF 4P-2046 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00373317 SEBP1958
4P1357 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5887 [1] HOUSING GP-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 7E-6002 [1] BUSHING (REAR)(REAR)  
5. 7E-6003 [1] BUSHING (CENTER)(CENTER)  
6. 7E-6004 [1] BUSHING (FRONT)(FRONT)  
7. 4P-7045 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 4P-8480 [6] PIN-PUMP GUIDE  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG  
13. 109-9685 [1] SEAL-O-RING  
14. 8E-5237 [2] RACE-THRUST BEARING  
15. 7L-3326 [1] BEARING-THRUST  
16. 9N-1545 [2] RACE-THRUST BEARING  
17. 3S-8022 [1] BEARING-THRUST  
18. 4P-2948 [1] RING-GUIDE  
19. 4P-1359 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT (1/4-20X0.875-IN)  
22. 8J-4351 [2] SEAL-O-RING  
23. 113-7794 [6] BUSHING  
24. 3J-7354 [2] SEAL-O-RING  
25. 144-0482 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT (1/4-20X0.75-IN)  
28. 9S-4182 [2] PLUG (7/16-20-THD)  
29. 131-3719 [6] SEAL-O-RING  
30. 108-6633 Y [6] PUMP GP-FUEL INJECTION  
31. 109-3206 [1] SEAL-O-RING  
32. 9S-8003 [1] PLUG (1/2-20-THD)  
33. 5P-7813 [2] SEAL-O-RING  
34. 9S-8007 [2] PLUG  
35. 7E-6011 [6] LIFTER AS  
36. 7E-9907 [6] SPACER (34.8X42.125X6.76-MM THK)  
37. 1W-5785 [1] COVER  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19580692
 

4P-1378: PUMP GP-FUEL INJECTION

4P-1378 PUMP GP-FUEL INJECTION
PART OF 4P-1370, 4P-1371, 4P-2045, 4P-5922 PUMP GP-GOV & FUEL INJ
Type 1
ALSO AN ATTACHMENT
i00373389 SEBP1958
4P1378 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5887 [1] HOUSING GP-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 7E-6002 [1] BUSHING (REAR)  
5. 7E-6003 [1] BUSHING (CENTER)  
6. 7E-6004 [1] BUSHING (FRONT)  
7. 8N-0654 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG  
13. 4J-7533 [1] SEAL-O-RING  
14. 8E-5237 [2] RACE-THRUST BEARING  
15. 7L-3326 [1] BEARING-THRUST  
16. 9N-1545 [2] RACE-THRUST BEARING  
17. 3S-8022 [1] BEARING-THRUST  
18. 4P-2948 [1] RING-GUIDE  
19. 4P-2647 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT (1/4-20X0.875-IN)  
22. 1H-9696 [2] SEAL-O-RING  
23. 4P-2899 [6] BUSHING-TERMINAL  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT (1/4-20X0.75-IN)  
28. 9S-4182 [2] PLUG (7/16-20-THD)  
29. 7E-4847 [6] SEAL-O-RING  
30. 4P-7681 Y [6] PUMP GP-FUEL INJECTION  
31. 1J-9671 [1] SEAL-O-RING  
32. 9S-8003 [1] PLUG (1/2-20-THD)  
33. 7J-0204 [2] SEAL-O-RING  
34. 9S-8007 [2] PLUG  
35. 7E-6011 [6] LIFTER AS  
36. 7E-9907 [6] SPACER (34.8X42.125X6.76-MM THK)  
37. 1W-5785 [1] COVER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19580693
 

4P-1378: PUMP GP-FUEL INJECTION

4P-1378 PUMP GP-FUEL INJECTION
PART OF 4P-1370, 4P-1371, 4P-2045, 4P-5922 PUMP GP-GOV & FUEL INJ
Type 2
ALSO AN ATTACHMENT
i00373392 SEBP1958
4P1378 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5887 [1] HOUSING GP-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 7E-6002 [1] BUSHING (REAR)  
5. 7E-6003 [1] BUSHING (CENTER)  
6. 7E-6004 [1] BUSHING (FRONT)  
7. 8N-0654 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG  
13. 4J-7533 [1] SEAL-O-RING  
14. 8E-5237 [2] RACE-THRUST BEARING  
15. 7L-3326 [1] BEARING-THRUST  
16. 9N-1545 [2] RACE-THRUST BEARING  
17. 3S-8022 [1] BEARING-THRUST  
18. 4P-2948 [1] RING-GUIDE  
19. 4P-2647 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT (1/4-20X0.875-IN)  
22. 1H-9696 [2] SEAL-O-RING  
23. 4P-2899 [6] BUSHING-TERMINAL  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT (1/4-20X0.75-IN)  
28. 9S-4182 [2] PLUG (7/16-20-THD)  
29. 7E-4847 [6] SEAL-O-RING  
30. 6I-2665 CY [1] PUMP GP-FUEL INJECTION  
31. 1J-9671 [1] SEAL-O-RING  
32. 9S-8003 [1] PLUG (1/2-20-THD)  
33. 7J-0204 [2] SEAL-O-RING  
34. 9S-8007 [2] PLUG  
35. 7E-6011 [6] LIFTER AS  
36. 7E-9907 [6] SPACER (34.8X42.125X6.76-MM THK)  
37. 1W-5785 [1] COVER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19580694
 

4P-4697: PUMP GP-FUEL INJECTION

4P-4697 PUMP GP-FUEL INJECTION
PART OF 4P-1391, 4P-1398, 4P-1402 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00376475 SEBP1958
4P4697 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5887 [1] HOUSING GP-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 7E-6002 [1] BUSHING (REAR)  
5. 7E-6003 [1] BUSHING (CENTER)  
6. 7E-6004 [1] BUSHING (FRONT)  
7. 8N-0654 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG  
13. 4J-7533 [1] SEAL-O-RING  
14. 8E-5237 [2] RACE-THRUST BEARING  
15. 7L-3326 [1] BEARING-THRUST  
16. 9N-1545 [2] RACE-THRUST BEARING  
17. 3S-8022 [1] BEARING-THRUST  
18. 4P-2948 [1] RING-GUIDE  
19. 4P-4698 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT (1/4-20X0.875-IN)  
22. 1H-9696 [2] SEAL-O-RING  
23. 4P-2899 [6] BUSHING-TERMINAL  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT (1/4-20X0.75-IN)  
28. 9S-4182 [2] PLUG (7/16-20-THD)  
29. 7E-4847 [6] SEAL-O-RING  
30. 4P-7681 YC [6] PUMP GP-FUEL INJECTION  
31. 1J-9671 [1] SEAL-O-RING  
32. 9S-8003 [1] PLUG (1/2-20-THD)  
33. 7J-0204 [2] SEAL-O-RING  
34. 9S-8007 [2] PLUG  
35. 7E-6011 [6] LIFTER AS  
36. 7E-9907 [6] SPACER (34.8X42.125X6.76-MM THK)  
37. 1W-5785 [1] COVER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19580695
 

4P-7681: PUMP GP-FUEL INJECTION

4P-7681 PUMP GP-FUEL INJECTION
PART OF 4P-1355, 4P-1356, 4P-1378, 4P-4697 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00147181 SEBP1958
4P7681 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1665 [1] BONNET-VALVE  
2. 4P-7688 [1] VALVE AS-CHECK (FUEL INJECTION PUMP)  
3. 8N-5993 [1] SPRING-FLOW CHECK  
4. 1N-3257 [1] RING-RETAINING  
5. 7E-6007 [1] PLUNGER & BARREL AS  
 

#SEBP19580696
 

6I-2665: PUMP GP-FUEL INJECTION

6I-2665 PUMP GP-FUEL INJECTION
PART OF 4P-1356, 4P-1378 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00394796 SEBP1958
6I2665 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1665 [1] BONNET-VALVE  
2. 4P-9258 [1] VALVE AS-CHECK  
3. 8N-5993 [1] SPRING-FLOW CHECK  
4. 7E-6007 [1] PLUNGER & BARREL AS  
  4P-8704 [1] SPRING-LIFTER  
5. 1N-3257 [1] RING-RETAINING  
 

#SEBP19580697
 

7C-6606: PUMP GP-FUEL INJECTION

7C-6606 PUMP GP-FUEL INJECTION
S/N 3ZJ1-895
PART OF 7C-6651 PUMP GP-GOV & FUEL INJ
i00409522 SEBP1958
7C6606 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-0987 C [1] HOUSING GP-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 4P-0986 [1] BEARING-CAM  
5. 4P-0985 [1] BEARING-CAM  
6. 4P-0984 [1] BEARING-CAM  
7. 4P-7045 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG  
13. 4J-7533 [1] SEAL-O-RING  
14. 8E-5237 C [2] RACE-THRUST BEARING  
15. 7L-3326 [1] BEARING-THRUST  
16. 9J-0114 [2] RACE-THRUST BEARING  
17. 7D-1189 [1] BEARING-THRUST  
18. 2W-9969 [1] RING-GUIDE  
19. 9Y-0267 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT (1/4-20X0.875-IN)  
22. 1H-9696 [2] SEAL-O-RING  
23. 7C-6617 [6] BUSHING-TERMINAL  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT (1/4-20X0.75-IN)  
28. 9S-4182 [2] PLUG (7/16-20-THD)  
29. 7E-4847 C [6] SEAL-O-RING  
30. 2W-3413 [6] PUMP GP-FUEL INJECTION  
    (EACH INCLUDES)
  2W-3409 [1] BONNET-VALVE  
31. 1W-6982 [1] VALVE AS-CHECK (FUEL INJECTION PUMP)  
32. 8N-5993 [1] SPRING-FLOW CHECK  
33. 1N-3257 [1] RING-RETAINING  
34. 2W-3414 [1] PLUNGER & BARREL AS  
35. 7E-6011 [6] LIFTER AS  
36. 8N-0672 [6] SPACER  
37. 1W-5785 [1] COVER  
38. 9S-8007 [2] PLUG  
39. 7J-0204 [2] SEAL-O-RING  
40. 9S-8003 [1] PLUG (1/2-20-THD)  
41. 1J-9671 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19580698
 

7E-6006: PUMP GP-FUEL INJECTION

7E-6006 PUMP GP-FUEL INJECTION
PART OF 4P-1355, 4P-1356 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00147284 SEBP1958
7E6006 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3409 [1] BONNET-VALVE  
2. 1W-6982 [1] VALVE AS-CHECK (FUEL INJECTION PUMP)  
3. 8N-5993 [1] SPRING-FLOW CHECK  
4. 1N-3257 [1] RING-RETAINING  
5. 7E-6007 [1] PLUNGER & BARREL AS  
 

#SEBP19580699
 

118-4489: PUMP GP-FUEL PRIMING

118-4489 PUMP GP-FUEL PRIMING
FOR USE WITH REMOTE MOUNTED FUEL FILTER
AN ATTACHMENT
i00483090 SEBP1958
1184489 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
2. 1N-3789 [1] BASE AS-FILTER  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
3. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
4. 118-4490 Y [1] COVER GP-FUEL FILTER BASE  
5. 105-2508 [1] PUMP AS-FUEL PRIMING  
6. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 6V-5048 [1] SEAL-O-RING  
8. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
9. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 9S-4182 [1] PLUG (7/16-20-THD)  
11. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 0S-1594 [2] BOLT (3/8-16X1-IN)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Do Not Use A Wire Brush On Fuel Nozzles
1982/09/29
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
New 8T2998 Lubricant Available
1986/02/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Improved Locknut In Timing Advance On Fuel Pump And Governor Drive Group
1988/07/01
Fuel Injection Pump Bushing Torque Increased
1991/04/01
Fuel Nozzle Orifice Erosion
1991/08/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1991/09/01
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly.
1992/09/01
3406 Truck Engine Component Update
1992/10/01
New Bushing Used In Fuel Injection Pump Groups
1993/03/01
Summery Of Changes To Timing Advance Drive Groups
1993/05/01
New Bonnet Used In Fuel Injection Pump Group
1993/06/01
Fuel Injection Pump Improvements{1251}
1994/01/01
Fuel Injection Pump Improvements{1251}
1994/04/22
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles {1254}
1994/05/31
Procedure For Lapping Sealing Surfaces Of Fuel Injection Pump Barrels And Bonnets{1251}
1994/06/24
Fuel Injection Nozzle Spray Orifice Plugging{1254}
1994/07/01
Changing Complete Sets Of Fuel Injection Pump Groups May Not Fix Low Power Problems{1251}
1994/08/30
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance{1251}
1994/09/01
Fuel Injection Nozzle Reference {1254}
1994/11/01
Governors Now Use New Low Mass Weight Carrier{1272}
1995/03/01
Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/27
Fuel Injection Nozzle Reference {1254}
1996/03/27
New O-Ring Seals Used On "Through-Head-Adapter" And "Internal Fuel Lines" In Fuel Injection Lines Groups{1252}
1996/10/01
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24
Summary Of Changes To Timing Advance Drive Groups (Update){1272}
1997/02/24
New Fuel Line Support Brackets Help Eliminate Vibration{1252}
1997/11/18
Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2006/06/01
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2007/08/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain On-Highway Truck Engines {1251, 1290}
2012/07/09
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain On-Highway Truck Engines {1250, 1251, 1290, 1713}
2013/10/29
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
Product Support Program For Replacing The Fuel Injector Nozzles On Certain 3406C Engines Rated At 415 Or 425 Horsepower
Product Support Program For Replacing The Fuel Injector Nozzles On Certain 3406C Engines Rated At 415 Or 425 Horsepower
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Low Power Complants/Fuel Flow Rates May Be Reduced
Low Power Complants/Fuel Flow Rates May Be Reduced
Valve Bonnets with Insufficient Hardness
Valve Bonnets with Insufficient Hardness
Specifications
Fuel Injection Nozzle And Adapter (Earlier)
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzle And Adapter (Later)
3406B DIESEL TRUCK ENGINE
Fuel Transfer Pump
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump<BR> Engines With Serial Numbers 7FB1-Up, 4MG1-Up, And 5KJ1-Up
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump<BR> Engines With Serial Numbers 3ZJ1-Up
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE
Governor
3406B DIESEL TRUCK ENGINE
Governor Control Linkage
3406B DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group (Earlier)<BR> (Automatic Timing Advance Unit)
3406B DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group (Later)<BR> (Automatic Timing Advance Unit)
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzle And Adapter
3406C DIESEL TRUCK ENGINE
Fuel Transfer Pump
3406C DIESEL TRUCK ENGINE
Fuel Injection Pump
3406C DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406C DIESEL TRUCK ENGINE
Governor
3406C DIESEL TRUCK ENGINE
Governor Control Linkage
3406C DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group (4W4619 Only)(Automatic Timing Advance Unit)
3406C DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group (Automatic Timing Advance Unit)
3406C DIESEL TRUCK ENGINE
Fuel System Identification
3406C DIESEL TRUCK ENGINE
Fuel Injection Nozzle And Adapter
3406C DIESEL TRUCK ENGINE
Fuel Transfer Pump
3406C DIESEL TRUCK ENGINE
Fuel Injection Pump
3406C DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406C DIESEL TRUCK ENGINE
Governor
3406C DIESEL TRUCK ENGINE
Governor Control Linkage
3406C DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group<BR> (4W4619 Only)(Automatic Timing Advance Unit)
3406C DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group<BR> (Automatic Timing Advance Unit)
3406C DIESEL TRUCK ENGINE
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Line Adapters
3406B DIESEL TRUCK ENGINE
Fuel Transfer Pump
3406B DIESEL TRUCK ENGINE
Automatic Timing Advance 7FB1-Up, 4MG1-4MG3599
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing And Governor
3406B DIESEL TRUCK ENGINE
Governor
3406B DIESEL TRUCK ENGINE
Fuel Injection Pumps
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE
Rocker Shaft Assemblies
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzles (Earlier)
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzle Adapters (Earlier)
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzles And Adapters (Later)
3406B DIESEL TRUCK ENGINE
Fuel Injection Line Adapters
3406C DIESEL TRUCK ENGINE
Fuel Transfer Pump
3406C DIESEL TRUCK ENGINE
Automatic Timing Advance
3406C DIESEL TRUCK ENGINE
Fuel Injection Pump Housing And Governor
3406C DIESEL TRUCK ENGINE
Governor
3406C DIESEL TRUCK ENGINE
Fuel Injection Pumps
3406C DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406C DIESEL TRUCK ENGINE
Rocker Shaft Assemblies And Push Rods
3406C DIESEL TRUCK ENGINE
Rocker Shaft Assemblies
3406C DIESEL TRUCK ENGINE
Fuel Injection Nozzles And Adapters
3406C DIESEL TRUCK ENGINE
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Fuel Nozzle Orifice Erosion{1254,1250}
1991/09/02
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/24
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
New Bushing Used In Fuel Injection Pump Groups{1251}
1993/03/22
Summary Of Changes To Timing Advance Drive Groups{1272}
1993/05/24
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Fuel Injection Pump Improvements{1251}
1994/02/07
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/08

Caterpillar Parts SIS Catalog 3406B :

PUMP GP-FUEL INJECTION
4P-1356 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1356 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1355 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1355 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
108-6634 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
108-6633 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
107-7535 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
107-7534 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1357 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1378 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1378 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-4697 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-7681 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2665 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-6606 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-6006 PUMP GP-FUEL INJECTION

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.