AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

141-7898 PUMP AS-FUEL TRANSFER PART OF 147-5680, 147-5684, 147-5688, 147-5691, 147-5694, 147-5697, 162-2246, 170-0397 TANK AS-FUEL AN ATTACHMENT 3516


FUEL SYSTEM
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING

GEN SET ENGINE 3516 GEN SET ENGINE 5SJ
 3516 Generator Set Engine 5SJ00001-UP SEBP1961 3516 5SJ   (1992)

FUEL SYSTEM

PUMP GP-FUEL TRANSFER
PUMP AS-FUEL TRANSFER
141-7898 PUMP AS-FUEL TRANSFER
PUMP AS-FUEL TRANSFER
170-4007 PUMP AS-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
169-8615 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1N-4478 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER
 

#SEBP19610470
 

141-7898: PUMP AS-FUEL TRANSFER

141-7898 PUMP AS-FUEL TRANSFER
PART OF 147-5680, 147-5684, 147-5688, 147-5691, 147-5694, 147-5697, 162-2246, 170-0397 TANK AS-FUEL
AN ATTACHMENT
i01095941 SEBP1961
1417898 PUMP AS-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0290 [4] BOLT (3/8-16X3.5-IN)  
2. 170-4007 Y [1] PUMP AS-FUEL TRANSFER  
3. 170-4008 [1] MOTOR AS  
4. 200-5265 [1] BRACKET  
5. 200-5272 [2] CAP  
6. 3B-4506 [4] LOCKWASHER  
7. 372-5140 [1] KEY  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19610471
 

170-4007: PUMP AS-FUEL TRANSFER

170-4007 PUMP AS-FUEL TRANSFER
PART OF 141-7898 PUMP AS-FUEL TRANSFER
AN ATTACHMENT
i01476327 SEBP1961
1704007 PUMP AS-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-4732 [2] BOLT (9/16-12X1.25-IN)  
2. 170-4009 [1] GASKET  
3. 170-4010 [1] SEAL  
4. 200-5266 [1] BUSHING  
5. 200-5267 [1] BUSHING  
6. 200-5268 [1] SHAFT  
7. 200-5269 [1] COVER  
8. 200-5270 [1] ROTOR  
9. 200-5271 [1] PISTON  
10. 3B-4506 [2] LOCKWASHER  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
 

#SEBP19610472
 

6I-3613: PUMP GP-FUEL INJECTION

6I-3613 PUMP GP-FUEL INJECTION
S/N 5SJ1-735
i00397471 SEBP1961
6I3613 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-3075 Y [1] INJECTOR GP-FUEL  
2. 1N-4910 [1] CLAMP-INJECTOR  
3. 4F-7226 [1] BOLT (7/16-14X4-IN)  
4. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
5. 234-4182 [1] PLUG  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19610473
 

9Y-1796: PUMP GP-FUEL INJECTION

9Y-1796 PUMP GP-FUEL INJECTION
S/N 5SJ162-UP
FOR USE WITH ENGINE RATINGS OF 1301 TO 1600 RPM
i00092250 SEBP1961
9Y1796 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9076 CY [1] INJECTOR GP-FUEL  
2. 1N-4910 [1] CLAMP-INJECTOR  
3. 4F-7226 [1] BOLT (7/16-14X4-IN)  
4. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
5. 234-4182 [1] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19610474
 

107-0165: PUMP GP-FUEL PRIMING

107-0165 PUMP GP-FUEL PRIMING
FOR USE WITH 106-9873 PUMP GP-ENGINE OIL
AN ATTACHMENT
i00493123 SEBP1961
1070165 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-0693 [10] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [2] GROMMET  
2. 7N-8599 Y [1] PUMP GP-FUEL PRIMING  
3. 9N-1752 [1] SPRING  
4. 107-0159 [1] TUBE AS  
5. 237-2715 [1] TUBE AS  
6. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
7. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
8. 1P-7625 [1] ELBOW  
9. 2H-9523 [1] GROMMET  
10. 3J-1907 [1] SEAL-O-RING  
11. 3K-0360 [1] SEAL-O-RING  
12. 4B-9782 [1] BALL  
13. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 250-1496 [1] ELBOW  
15. 6V-4362 [1] CONNECTOR  
16. 6V-5049 [1] SEAL-O-RING  
17. 8N-3480 [1] CLIP  
18. 9S-4191 [1] PLUG (9/16-18-THD)  
19. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19610475
 

107-0166: PUMP GP-FUEL PRIMING

107-0166 PUMP GP-FUEL PRIMING
FOR USE WITH @@@@@106-9873@@@@@
AN ATTACHMENT
i00493125 SEBP1961
1070166 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-0692 [4] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [1] GROMMET  
2. 4P-0693 [10] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [2] GROMMET  
3. 7N-8599 Y [1] PUMP GP-FUEL PRIMING  
4. 8N-6296 [1] TUBE AS  
5. 9N-1752 [1] SPRING  
6. 107-0159 [1] TUBE AS  
7. 250-1496 [1] ELBOW  
8. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
9. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
10. 1P-7625 [1] ELBOW  
11. 2H-9523 [1] GROMMET  
12. 3J-1907 [1] SEAL-O-RING  
13. 3K-0360 [1] SEAL-O-RING  
14. 4B-9782 [1] BALL  
15. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 6V-4362 [1] CONNECTOR  
17. 7K-3377 [2] PIPE  
18. 8N-3480 [1] CLIP  
19. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19610476
 

7N-8599: PUMP GP-FUEL PRIMING

7N-8599 PUMP GP-FUEL PRIMING
S/N 5SJ1-654
PART OF 107-0165, 107-0166, 7W-9465, 7W-9466 PUMP GP-FUEL PRIMING
AN ATTACHMENT
i00410945 SEBP1961
7N8599 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-2606 C [1] PUMP AS-FUEL PRIMING  
2. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
3. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 9Y-8389 [1] GASKET (FUEL PRIMING PUMP)  
5. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19610477
 

7W-9465: PUMP GP-FUEL PRIMING

7W-9465 PUMP GP-FUEL PRIMING -RH
Type 1
AN ATTACHMENT
i00418825 SEBP1961
7W9465 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-8599 Y [1] PUMP GP-FUEL PRIMING  
2. 2H-9523 [1] GROMMET  
3. 8N-3480 [1] CLIP  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
6. 4B-9782 [1] BALL  
7. 9N-1752 [1] SPRING  
8. 1P-7625 [1] ELBOW  
9. 3K-0360 [1] SEAL-O-RING  
10. 8N-2755 [8] CLAMP  
11. 5P-4900 [1] ELBOW-FLARED  
12. 6V-4362 [1] CONNECTOR  
13. 3J-1907 [1] SEAL-O-RING  
14. 1N-4640 [1] TUBE AS  
15. 8N-6325 [1] TUBE AS  
16. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
17. 1D-4717 [1] NUT (3/8-16-THD)  
18. 9Y-0047 [2] CLAMP  
  7C-3036 [2] GROMMET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19610478
 

7W-9465: PUMP GP-FUEL PRIMING

7W-9465 PUMP GP-FUEL PRIMING -RH
Type 2
AN ATTACHMENT
i00418829 SEBP1961
7W9465 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-8599 Y [1] PUMP GP-FUEL PRIMING  
2. 2H-9523 [1] GROMMET  
3. 8N-3480 [1] CLIP  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
6. 4B-9782 [1] BALL  
7. 9N-1752 [1] SPRING  
8. 1P-7625 [1] ELBOW  
9. 8L-2786 [1] SEAL-O-RING  
10. 4P-0693 C [10] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [2] GROMMET  
11. 250-1496 [1] ELBOW  
12. 6V-4362 [1] CONNECTOR  
14. 1N-4640 [1] TUBE AS  
15. 237-2715 [1] TUBE AS  
16. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
17. 9S-8752 C [1] NUT-FULL (3/8-16-THD)  
18. 9S-4191 [1] PLUG (9/16-18-THD)  
19. 6V-5049 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19610479
 

7W-9466: PUMP GP-FUEL PRIMING

7W-9466 PUMP GP-FUEL PRIMING -LH
AN ATTACHMENT
i00418833 SEBP1961
7W9466 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3516 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-4640 [1] TUBE AS  
2. 4P-0692 [4] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [1] GROMMET  
3. 4P-0693 [10] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [1] GROMMET  
4. 7N-8599 Y [1] PUMP GP-FUEL PRIMING  
5. 237-2718 [1] TUBE AS  
6. 9N-1752 [1] SPRING  
7. 250-1496 [1] ELBOW  
8. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
9. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
10. 1P-7625 [1] ELBOW (90-DEG)  
11. 2H-9523 [1] GROMMET  
12. 4B-9782 [1] BALL  
13. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 6V-4362 [1] CONNECTOR  
15. 6V-5049 [1] SEAL-O-RING  
16. 7K-3377 [2] PIPE  
17. 8L-2786 [1] SEAL-O-RING  
18. 8N-3480 [1] CLIP  
19. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
New 3161 Governor With Improved Fuel Limiter
1993/09/01
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/11/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Basic Fuel Transfer Pump Group Includes New Outer Lip Type Seal {1256}
1999/07/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
A New Fuel Transfer Pump Group Is Used {1256}
2002/11/01
Fuel Transfer System for Power Modules {1256}
2003/10/01
A New Fuel Transfer Pump is Used {1256}
2004/10/01
New Fuel Transfer Pump {1256}
2008/03/03
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Pressure Requirements for the Fuel Transfer System{1256}
Pressure Requirements for the Fuel Transfer System{1256}
Specifications
Fuel Transfer Pump
3516 Generator Set Engine
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Transfer Pump
3500 GENERATOR SET ENGINES
Governor Actuator Drive
3500 GENERATOR SET ENGINES
Governor Fastener Group
3500 GENERATOR SET ENGINES
Service Magazine
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New 3161 Governor With Improved Fuel Limiter{1264}
1993/09/20

Caterpillar Parts SIS Catalog 3516 :

MANIFOLD GP-FUEL
156-9756 MANIFOLD GP-FUEL
MANIFOLD GP-FUEL
156-9755 MANIFOLD GP-FUEL
LINES GP-FUEL INJECTION
9Y-6577 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-6577 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
6I-3129 LINES GP-FUEL INJECTION
LINES GP-FLEXIBLE FUEL
5N-2438 LINES GP-FLEXIBLE FUEL
LINES GP-FLEXIBLE FUEL
3N-6668 LINES GP-FLEXIBLE FUEL
INJECTOR GP-FUEL
6I-3075 INJECTOR GP-FUEL
PUMP AS-FUEL TRANSFER
170-4007 PUMP AS-FUEL TRANSFER
PUMP GP-FUEL INJECTION
6I-3613 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
9Y-1796 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
107-0165 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
107-0166 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
7N-8599 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
7W-9465 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
7W-9465 PUMP GP-FUEL PRIMING

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.