6N-9347 HOUSING GP-FLYWHEEL S/N 11N1-99999; A5N1-UP; A5Y1-UP PART OF 104-1750, 4P-7980, 4P-8980 ENGINE AR 980F

BASIC ENGINE

HOUSING GP-FLYWHEEL

0. 6N-9347 HOUSING GP

GEAR GP

1. 1W-1427 HOUSING GP

CYLINDER HEAD GP

2. 425-5679 KIT-CYLIND

ENGINE ARRANGEMENT

ENGINE AR

3. 425-5672 KIT-ENGINE

SERVICE EQUIPMENT AND SUPPLIES

KIT-REBUILD

4. 20R-0682 KIT-ENGINE
5. 20R-1099 KIT-ENGINE
6. 379-9131 KIT-ENGINE
7. 380-1234 KIT-ENGINE

BASIC ENGINE

HOUSING GP-FRONT

8. 425-5673 KIT-FRONT

LIFTING GP-ENGINE

9. 7N-4459 LIFTING GP
0. INFORMATION

WHEEL LOADER 980F WHEEL LOADER 8CJ
980F Wheel Loader 8CJ00001-UP (MACHINE) POWERED BY 3406 Engine SEBP1966 980F 8CJ (1991)

BASIC ENGINE

HOUSING GP-FLYWHEEL

4P-9991 HOUSING GP-FLYWHEEL

6N-9347 HOUSING GP-FLYWHEEL

#SEBP19660070

6N-9347: HOUSING GP-FLYWHEEL

HOUSING GP-FLYWHEEL

6N-9347 HOUSING GP-FLYWHEEL
S/N 11N1-99999; A5N1-UP; A5Y1-UP
PART OF 104-1750, 4P-7980, 4P-8980 ENGINE AR

i00166149 SEBP1966

For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-1162	[1]	GASKET
2.	2P-2772	[1]	COVER
3.	319-0785 Y	[1]	SEAL GP-CRANKSHAFT (REAR)(FLYWHEEL HOUSING)
4.	5F-0304	[1]	PLUG
5.	9Y-6089	[1]	GASKET
6.	108-4758	[1]	HOUSING AS
	3B-1925	[1]	WASHER (0.766X1X0.064-IN THK)
	9L-9653	[1]	PLUG
	1W-3136	[1]	BAFFLE
7.	155-5619	[1]	GASKET
8.	160-2563	[1]	ADAPTER
9.	165-3929	[10]	BOLT (3/8-16X1.5-IN)(3/8-16X1.5IN)
			(MARKED X)
10.	165-3933	[5]	BOLT (3/8-16X2.25-IN)(3/8-16X2.25IN)
			(MARKED Y)
11.	0S-1566	[3]	BOLT (5/8-11X1.5-IN)
12.	0S-1594	[1]	BOLT (3/8-16X1-IN)
13.	0S-1619	[1]	BOLT (3/8-16X3-IN)
14.	2S-4078	[1]	SEAL-O-RING
14A.	5K-9090	[1]	SEAL-O-RING
14B.	6V-9875	[1]	CONNECTOR
15.	4N-0933	[1]	GASKET
16.	5M-2894	[17]	WASHER-HARD (10.2X18.5X2.5-MM THK)
17.	5P-8245	[9]	WASHER-HARD (13.5X25.5X3-MM THK)
18.	5P-8247	[3]	WASHER-HARD (17X32X3.5-MM THK)
19.	7K-6058	[9]	BOLT-12 POINT HEAD (1/2-13X2.5-IN)
			(MARKED P)
20.	7X-7731	[2]	PLUG-PIPE (3/4-14-THD)
21.	8T-6765	[2]	PLUG-PIPE (1/4-18-THD)
22.	2A-1912	[1]	PLUG
23.	3B-1925	[1]	WASHER (0.766X1X0.064-IN THK)
	Y		SEPARATE ILLUSTRATION

#SEBP19660071

1W-1427: HOUSING GP-FRONT

HOUSING GP-FRONT

1W-1427 HOUSING GP-FRONT
S/N 11N1-99999; A5N1-UP; A5Y1-UP
PART OF 104-1750, 4P-7980, 4P-8980 ENGINE AR

i00166136 SEBP1966

For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0T-0055	[2]	BOLT (3/8-16X4.25-IN)
2.	5M-2894	[18]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	166-9142	[1]	GASKET
4.	0L-1352	[2]	BOLT (3/8-16X3.25-IN)
5.	1A-2029	[4]	BOLT (3/8-16X1.125-IN)
6.	1W-1426	[1]	HOUSING AS-GEAR
7.	6F-7012	[2]	STUD-TAPERLOCK (3/8-16X1.57-IN)
8.	5M-6214	[1]	PLUG (1/8-27 PTF)
9.	4B-8641 C	[5]	STUD (3/8-16X2.24-IN)(6.1CM LG)
			-OR-
	8M-1871 C	[5]	STUD-TAPERLOCK (3/8-16X2.4-IN)(5.7CM LG)
10.	4B-8641 C	[3]	STUD (3/8-16X2.24-IN)
11.	1N-3181	[2]	STUD-HOLLOW (3/8-16X1.476-IN)
	6B-2250	[2]	GASKET
12.	5P-4255	[8]	BOLT-LOCKING (3/8-16X1-IN)
13.	8S-9191	[1]	BOLT (3/8-16X4-IN)
14.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
15.	1W-1471	[1]	PLATE
16.	166-9146 C	[1]	GASKET
17.	6N-0389	[1]	STUD (1/2-13X2.63-IN)
	4H-6145	[1]	GASKET
	C		CHANGE FROM PREVIOUS TYPE

#SEBP19660072

425-5679: KIT-CYLINDER HEAD GASKET

KIT-CYLINDER HEAD GASKET

425-5679 KIT-CYLINDER HEAD GASKET
S/N 8CJ1-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEAL. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY, THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED. BOLTS, NUTS, STUDS, WASHERS, SPACERS,ETC
FIELD REPLACEMENT FOR 226-6067 KIT-GASKET, 226-2022 KIT-GASKET
FOR USE WITH @@@@@ 4P-7980@@@@@, @@@@@104-1750@@@@@, @@@@@ 1W-1427@@@@@

i05351493 SEBP1966

For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
1S-4295	[1]	GASKET (TURBOCHARGER)
2N-8204	[6]	GASKET
2N-8630	[2]	GASKET
7C-0307	[1]	GASKET
7M-7273	[1]	GASKET
4N-7253	[6]	GASKET-CHAMBER
6I-3066	[1]	GASKET-CYLINDER HEAD
129-9452	[6]	GASKET-EXHAUST MANIFOLD
1S-4810	[1]	GASKET-OIL DRAIN
1S-6595	[1]	GASKET-OIL SUPPLY
6I-4024	[1]	GASKET-PLATE
4N-1156	[1]	GASKET-REGULATOR COVER
391-2167	[4]	LOCKNUT-FLANGE (3/8X16-THD)
5P-5678 N		SEAL (7-M)
3E-6772	[24]	SEAL (WATER)
126-2702	[1]	SEAL-INTEGRAL
3S-9643	[1]	SEAL-LIP TYPE
3S-5496	[4]	SEAL-O-RING
4L-8337	[2]	SEAL-O-RING
5S-1188	[2]	SEAL-O-RING
6V-3831	[1]	SEAL-O-RING
7L-4774	[6]	SEAL-O-RING
8C-5196	[1]	SEAL-O-RING
203-3940	[6]	SEAL-O-RING
109-0076	[1]	SEAL-O-RING
114-2687	[1]	SEAL-O-RING
464-0509	[6]	SEAL-O-RING
214-7568	[5]	SEAL-O-RING
313-9550	[4]	STUD-TAPERLOCK (3/8-16X2.165-IN)
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)

		FOR A LIST OF RELATED PARTS THAT ARE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED
N		ORDER BY THE METER

#SEBP19660073

425-5672: KIT-ENGINE GASKET

KIT-ENGINE GASKET

425-5672 KIT-ENGINE GASKET
S/N 8CJ1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, & BLOCK COVERS
FOR USE WITH @@@@@ 4P-7980@@@@@, @@@@@104-1750@@@@@, @@@@@ 1W-1427@@@@@

i05365605 SEBP1966

For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
8C-3445	[1]	CAP-DUST (ENGINE OIL)
1P-0436	[1]	GASKET (FUEL PRIMING PUMP)
2P-3760	[2]	GASKET
2P-4305	[2]	GASKET
2S-0795	[1]	GASKET
4N-0641	[1]	GASKET (TEMPERATURE REGULATOR)
4N-0699	[4]	GASKET
4N-0933	[2]	GASKET
353-5065	[1]	GASKET-OIL PAN (ENGINE)
7C-0307	[2]	GASKET (REGULATOR HOUSING, OUTLET)
7W-6081	[1]	GASKET
8M-7065	[1]	GASKET (AIR INLET)
165-6170	[3]	PLUG
2M-9780	[1]	SEAL-O-RING
2N-3350	[2]	SEAL-O-RING
5P-5846	[1]	SEAL-O-RING
5P-8068	[3]	SEAL-O-RING
6V-3830	[1]	SEAL-O-RING
8C-5230	[2]	SEAL-O-RING
8M-5260	[1]	SEAL-O-RING
9X-7378	[1]	SEAL-O-RING
113-5304	[2]	SEAL-O-RING
114-2687	[1]	SEAL-O-RING
114-4427	[1]	SEAL-O-RING
118-5068	[1]	SEAL-O-RING
119-5155	[1]	SEAL-O-RING
214-7566	[2]	SEAL-O-RING
214-7567	[2]	SEAL-O-RING
214-7568	[4]	SEAL-O-RING
238-5081	[2]	SEAL-O-RING
238-5083	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED

#SEBP19660074

20R-0682: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

20R-0682 KIT-ENGINE OVERHAUL
S/N 8CJ1-UP; A5N1-UP; A5Y1-UP
PROVIDE A ENGINE OVERHAUL (GOLD KIT) FOR THE 3406 MECHANICAL MACHINE ENGINES, ***OVERHAUL KITS FOR ENGINES (*2W-1004*) WITH WIDE JOURNAL CONNECTING RODS ONLY, ENGINE SERIAL NUMBER 11N00480 & UP. FOR EARLIER ENGINE SERIAL NUMBERS, CONTACT THE REMAN HELP LINE AT (888) 88-REMAN OR E-MAIL AT REMAN_HELP@CAT.COM
PART OF 4P-7980 ENGINE AR, 391-6160 PARTS GP-ENGINE OVERHAUL
FOR USE WITH @@@@@ 4P-7980@@@@@

i04597696 SEBP1966

For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
379-9131 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
0R-4178	[6]	CYLINDER PACK GP
		(EACH INCLUDES)
160-1131	[1]	BODY AS-PISTON
160-9874	[1]	KIT-GASKET (SINGLE CYLINDER LINER)
9L-5854	[1]	BAND-FILLER (130.2-MM ID)
110-2220	[1]	SEAL-LINER
142-6217	[1]	SEAL-O-RING
142-7072	[1]	SEAL-LINER
197-9322	[1]	LINER-CYLINDER BLOCK
346-3340	[1]	RING-PISTON (TOP)
8N-1608	[1]	PIN-PISTON
0R-3781	[1]	ROD AS-CONNECTING
4P-8495	[1]	BUSHING
7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
7E-5996	[1]	ROD AS-CONNECTING
7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
219-4458	[2]	PIN-DOWEL
7N-2043	[2]	DOWEL
2P-2817	[1]	RING-PISTON (INTERMEDIATE)
7E-5665	[2]	RETAINER-PIN
7N-7078	[1]	RING-PISTON (OIL CONTROL)
151-5928	[6]	JET AS-PISTON COOLING
9Y-1792	[1]	RETAINER

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		**OVERHAUL KITS FOR ENGINES (2W-1004*) WITH WIDE JOURNAL CONNECTING RODS ONLY.
		ENGINE SERIAL NUMBER 11N00480 & UP. FOR EARLIER ENGINE SERIAL NUMBERS CONTACT THE REMAN HELP LINE AT
		(888) 88-REMAN OR E-MAIL AT REMAN_HELP@CAT.COM****
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP19660075

20R-1099: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

20R-1099 KIT-ENGINE OVERHAUL
S/N 8CJ1-UP; A5N1-UP; A5Y1-UP
PROVIDE A ENGINE KIT OVERHAUL (PLATINUM KIT) FOR THE 3406 MECHANICAL MACHINE ENGINES, ***OVERHAUL KITS FOR ENGINES (*2W-1004*) WITH WIDE JOURNAL CONNECTING RODS ONLY, ENGINE SERIAL NUMBER 11N00480 & UP. FOR EARLIER ENGINE SERIAL NUMBERS, CONTACT THE REMAN HELP LINE AT (888) 88-REMAN OR E-MAIL AT REMAN_HELP@CAT.COM
PART OF 4P-7980 ENGINE AR, 391-6160 PARTS GP-ENGINE OVERHAUL
FOR USE WITH @@@@@ 4P-7980@@@@@

i04595929 SEBP1966

For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
379-9131 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
0R-9449 Y	[1]	PUMP GP-ENGINE OIL
100-6889	[12]	BRIDGE-VALVE
10R-7438	[1]	CYLINDER HEAD GP
2A-4429	[48]	LOCK-RETAINER
4N-7253	[6]	GASKET-CHAMBER
4W-2471	[24]	SPRING-VALVE (OUTER)
4W-2472	[24]	SPRING-VALVE (INNER)
4W-2473	[24]	WASHER-VALVE SPRING GUIDE
4W-2474	[24]	ROTOCOIL AS
6L-7442	[6]	STUD-TAPERLOCK (5/16-18X1.08-IN)
7W-2315	[6]	RETAINER
7W-6492	[4]	PLUG-PIPE (1/2-14-THD)
8T-6767	[1]	PLUG-PIPE (3/8-18-THD)
	[1]	CYLINDER HEAD AS
1W-5283	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
7C-5353 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
7C-5354 AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
2M-6471	[1]	PLUG-CUP
3B-0623	[10]	PLUG-CUP
3B-0645	[12]	PLUG-CUP
4N-5893	[12]	INSERT-VALVE SEAT (INLET)(STANDARD)
7C-7602 AB		INSERT-VALVE SEAT (0.13-MM OS, INLET)
7C-7603 AB		INSERT-VALVE SEAT (0.25-MM OS, INLET)
7C-7604 AB		INSERT-VALVE SEAT (0.51-MM OS, INLET)
7C-7605 AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
102-2102	[6]	PLUG
122-7374	[24]	GUIDE-VALVE (STANDARD)
121-9859 AB		GUIDE-VALVE (0.13-MM OS)
121-9860 AB		GUIDE-VALVE (0.51-MM OS)
0R-4178	[6]	CYLINDER PACK GP
		(EACH INCLUDES)
160-1131	[1]	BODY AS-PISTON
160-9874	[1]	KIT-GASKET (SINGLE CYLINDER LINER)
9L-5854	[1]	BAND-FILLER (130.2-MM ID)
110-2220	[1]	SEAL-LINER
142-6217	[1]	SEAL-O-RING
142-7072	[1]	SEAL-LINER
197-9322	[1]	LINER-CYLINDER BLOCK
346-3340	[1]	RING-PISTON (TOP)
8N-1608	[1]	PIN-PISTON
0R-3781	[1]	ROD AS-CONNECTING
4P-8495	[1]	BUSHING
7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
7E-5996	[1]	ROD AS-CONNECTING
7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
219-4458	[2]	PIN-DOWEL
7N-2043	[2]	DOWEL
2P-2817	[1]	RING-PISTON (INTERMEDIATE)
7E-5665	[2]	RETAINER-PIN
7N-7078	[1]	RING-PISTON (OIL CONTROL)
151-5928	[6]	JET AS-PISTON COOLING
0R-3421	[6]	NOZZLE AS-FUEL INJECTION
		(EACH INCLUDES)
9X-2836	[1]	SCREW-BUTTON HEAD
114-3362	[1]	SEAL-O-RING
7W-4487	[1]	WASHER-SPECIAL (9.76X17.14X1.27-MM THK)
9L-9098	[1]	SEAL-CARBON STOP
271-2489	[1]	SEAL-WASHER
10R-0482	[1]	PUMP GP-WATER
199-6530	[1]	PUMP GP-WATER
136-1107	[1]	RETAINER
153-1256	[1]	SEAL-LIP TYPE
222-1528	[1]	SEAL-LIP TYPE
349-2654	[1]	SEAL-WATER PUMP
4N-0350	[1]	GEAR-WATER PUMP DRIVE (74-TEETH)
108-7930	[1]	BEARING AS-ROLLER
0S-1591	[1]	BOLT (3/8-16X1.5-IN)
1A-1135	[1]	BOLT (5/8-11X2-IN)
1B-7182	[4]	BOLT (5/16-18X1.25-IN)
5S-0581	[1]	WASHER-HARD (17X38X8-MM THK)
9M-6527	[1]	WASHER-HARD (10.2X25.5X5-MM THK)
135-4928	[1]	SHAFT-WATER PUMP
108-5959	[1]	FILTER
129-9907	[1]	IMPELLER-PUMP
	[1]	KIT-GASKET
4W-4014	[1]	GASKET-REGULATOR HOUSING
7C-0307	[1]	GASKET
9M-3786	[1]	SEAL-O-RING
109-0076	[1]	SEAL-O-RING
109-0077	[3]	SEAL-O-RING
125-0434	[1]	SEAL-INTEGRAL (WATER TEMPERATURE REGULATOR)
156-5198	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		**OVERHAUL KITS FOR ENGINES (2W-1004*) WITH WIDE JOURNAL CONNECTING RODS ONLY.
		ENGINE SERIAL NUMBER 11N00480 & UP. FOR EARLIER ENGINE SERIAL NUMBERS CONTACT THE REMAN HELP LINE AT
		(888) 88-REMAN OR E-MAIL AT REMAN_HELP@CAT.COM****
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP19660076

379-9131: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

379-9131 KIT-ENGINE OVERHAUL
S/N 8CJ1-UP; A5N1-UP; A5Y1-UP
RELEASE OF THE (BRONZE) LEVEL OVERHAUL KIT FOR THE 3406/3406C ENGINE USED, IN THE 980F/980F SERIES II WHEEL LOADER, IN THE FOLLOWING MODELS USING 3406 ENGINE IN 980G, 627F, 824G CATERPILLAR MACHINES, ***OVERHAUL KITS FOR ENGINES (*2W-1004*) WITH WIDE JOURNAL CONNECTING RODS ONLY, ENGINE SERIAL NUMBER 11N00480 & UP. FOR EARLIER SERIAL NUMBERS, CONTACT THE REMAN HELP LINE AT (888) 88-REMAN OR E-MAIL AT REMAN_HELP@CAT.COM
PART OF 4P-7980 ENGINE AR, 20R-0682, 20R-1099 KIT-ENGINE OVERHAUL, 391-6160 PARTS GP-ENGINE OVERHAUL
FOR USE WITH T614- MACHINE S/N 8CJ1-UP, ENGINE S/N 70V1-UP, 11N1-UP, BMS1-UP ENGINE ARRANGEMENT 2W-1004, T748- MACHINE S/N 8JN1-UP, ENGINE S/N 11N1-UP, A5N1-UP, ENGINE ARRANGEMENT 4P-7980, REHS7281

i04561077 SEBP1966

For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
328-5573	[6]	BEARING-CONNECTING ROD (STANDARD)
7E-0558 AB		BEARING-CONNECTING ROD (0.635-MM US)
7E-0559 AB		BEARING-CONNECTING ROD (1.27-MM US)
2N-2765	[4]	BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)
3G-2292	[5]	BOLT-LOCKING (3/8-16X0.87-IN)
5P-4255	[8]	BOLT-LOCKING (3/8-16X1-IN)
4N-0685	[6]	BUSHING (1-IN WIDE)
4N-6658	[1]	BUSHING (1.3-IN WIDE)
131-7123	[1]	BUSHING
8C-3445	[1]	CAP-DUST
9M-2904	[2]	CLAMP-HOSE
1R-1808	[1]	FILTER-ENGINE OIL (ADVANCED EFFICIENCY)
1R-0749	[1]	FILTER-FUEL (ADVANCED EFFICIENCY)
1P-0436	[1]	GASKET (FUEL PRIMING PUMP)
1S-4295	[1]	GASKET (TURBOCHARGER)
1W-1898	[1]	GASKET
1W-5908	[1]	GASKET
383-3682	[2]	GASKET
2A-1162	[2]	GASKET
2M-1395	[1]	GASKET
2N-8204	[6]	GASKET
2N-8630	[2]	GASKET
2P-3760	[2]	GASKET
2P-4305	[2]	GASKET
2S-0795	[2]	GASKET
2W-0459	[1]	GASKET
4H-6145	[1]	GASKET
4H-9541	[1]	GASKET
4N-0641	[1]	GASKET
4N-0699	[4]	GASKET
4N-0933	[2]	GASKET
4N-1151	[1]	GASKET
4N-4725	[1]	GASKET
5H-0244	[1]	GASKET
6B-2250	[2]	GASKET
6L-9589	[2]	GASKET
7C-0307	[4]	GASKET
7N-7559	[1]	GASKET
7W-0688	[2]	GASKET
7W-5733	[1]	GASKET
7W-6081	[1]	GASKET
9H-8872	[1]	GASKET
9Y-6089	[1]	GASKET
153-5484	[2]	GASKET
155-5619	[1]	GASKET
166-9142	[1]	GASKET
166-9146	[1]	GASKET
341-9211	[4]	GASKET
4N-7253	[6]	GASKET-CHAMBER
4N-2695	[1]	GASKET-COVER
6I-3066	[1]	GASKET-CYLINDER HEAD
129-9452	[6]	GASKET-EXHAUST MANIFOLD
1S-4810	[1]	GASKET-OIL DRAIN
1S-6595	[1]	GASKET-OIL SUPPLY
6I-4024	[1]	GASKET-PLATE
4N-1156	[1]	GASKET-REGULATOR COVER
371-8115 E		HOSE (10-CM)
2N-2766	[16]	LOCKNUT (3/8-16-THD)
165-6170	[3]	PLUG
0L-1022	[4]	PLUG-CUP
7W-6534	[5]	PLUG-PIPE
7X-7732	[6]	PLUG-PIPE
8T-6757	[3]	PLUG-PIPE
8T-6767	[5]	PLUG-PIPE (3/8-18-THD)
248-5513	[1]	REGULATOR-TEMPERATURE (92-DEG C)
5P-5678 D		SEAL (3-M)
359-1439	[24]	SEAL AS-WATER
9L-9098	[6]	SEAL-CARBON STOP
142-5867	[1]	SEAL-CRANKSHAFT (FRONT)
142-5868	[1]	SEAL-CRANKSHAFT (REAR)(REAR)
125-0434	[1]	SEAL-INTEGRAL
126-2702	[6]	SEAL-INTEGRAL
129-3948	[1]	SEAL-INTEGRAL
234-8937	[1]	SEAL-INTEGRAL
3S-9643	[1]	SEAL-LIP TYPE
1H-7339	[1]	SEAL-O-RING
2N-3350	[3]	SEAL-O-RING
2S-4078	[1]	SEAL-O-RING
3J-7354	[2]	SEAL-O-RING
3S-5496	[6]	SEAL-O-RING
4L-8337	[2]	SEAL-O-RING
4M-8303	[1]	SEAL-O-RING
5K-9090	[1]	SEAL-O-RING
5P-4889	[1]	SEAL-O-RING
5P-5846	[2]	SEAL-O-RING
5P-7204	[2]	SEAL-O-RING
5P-7813	[2]	SEAL-O-RING
5P-8068	[3]	SEAL-O-RING
5S-1188	[2]	SEAL-O-RING
6L-7817	[2]	SEAL-O-RING
6V-3319	[1]	SEAL-O-RING
6V-3830	[1]	SEAL-O-RING
6V-3831	[1]	SEAL-O-RING
6V-9769	[4]	SEAL-O-RING
7L-4774	[6]	SEAL-O-RING
8C-5196	[1]	SEAL-O-RING
8C-5230	[2]	SEAL-O-RING
8L-2779	[6]	SEAL-O-RING
8M-4447	[2]	SEAL-O-RING
9M-3786	[1]	SEAL-O-RING
9X-7378	[2]	SEAL-O-RING
061-7539	[1]	SEAL-O-RING
109-0076	[1]	SEAL-O-RING
109-0077	[3]	SEAL-O-RING
109-0078	[6]	SEAL-O-RING
113-5304	[2]	SEAL-O-RING
114-2687	[1]	SEAL-O-RING
114-3362	[6]	SEAL-O-RING
114-4427	[3]	SEAL-O-RING
117-1385	[6]	SEAL-O-RING
118-5068	[1]	SEAL-O-RING
119-5155	[1]	SEAL-O-RING
122-3772	[1]	SEAL-O-RING
147-0182	[2]	SEAL-O-RING
156-5198	[1]	SEAL-O-RING
214-7566	[2]	SEAL-O-RING
214-7567	[2]	SEAL-O-RING
214-7568	[6]	SEAL-O-RING
238-5081	[2]	SEAL-O-RING
238-5082	[1]	SEAL-O-RING
238-5083	[1]	SEAL-O-RING
250-0466	[2]	SEAL-O-RING
4W-2754	[1]	SEAL-QUAD RING
9X-7715	[1]	SEAL-QUAD RING
271-2489	[6]	SEAL-WASHER
194-8124	[6]	SLEEVE AS (EXHAUST PORT)
2S-3770	[1]	SPACER (11X19X33.5-MM THK)
108-3612	[11]	SPACER (11.13X19.05X53-MM THK)
305-6843	[12]	SPRING-GUIDE
4S-6137	[1]	STUD-TAPERLOCK (3/8-16X3.1-IN)
106-1792	[11]	STUD-TAPERLOCK (3/8-16X4-IN)
7W-4482	[6]	WASHER (17.14X9.76X3.18-MM THK)
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)
5M-2894	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7W-4487	[6]	WASHER-SPECIAL (9.76X17.14X1.27-MM THK)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		**OVERHAUL KITS FOR ENGINES (2W-1004*) WITH WIDE JOURNAL CONNECTING RODS ONLY.
		ENGINE SERIAL NUMBER 11N00480 & UP. FOR EARLIER ENGINE SERIAL NUMBERS CONTACT THE REMAN HELP LINE AT
		(888) 88-REMAN OR E-MAIL AT REMAN_HELP@CAT.COM****
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER

#SEBP19660077

380-1234: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

380-1234 KIT-ENGINE OVERHAUL
S/N 8CJ1-UP; A5N1-UP; A5Y1-UP
PROVIDE A ENGINE KIT OVERHAUL (SILVER KIT) FOR THE 3406 MECHANICAL MACHINE ENGINES, ***OVERHAUL KITS FOR ENGINES (*2W-1004*) WITH WIDE JOURNAL CONNECTING RODS ONLY, ENGINE SERIAL NUMBER 11N00480 & UP. FOR EARLIER ENGINE SERIAL NUMBERS, CONTACT THE REMAN HELP LINE AT (888) 88-REMAN OR E-MAIL AT REMAN_HELP@CAT.COM
PART OF 4P-7980 ENGINE AR, 391-6160 PARTS GP-ENGINE OVERHAUL
FOR USE WITH @@@@@ 4P-7980@@@@@, REHS7291, T614- ENGINE S/N 11N-UP, 70V1-UP, BMS1-UP, MACHINE S/N 8CJ1-UP, 8JN1-UP

i04636430 SEBP1966

For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
9L-5854	[6]	BAND-FILLER (130.2-MM ID)
328-5573	[6]	BEARING-CONNECTING ROD (STANDARD)
7E-0558 AB		BEARING-CONNECTING ROD (0.635-MM US)
7E-0559 AB		BEARING-CONNECTING ROD (1.27-MM US)
378-0509	[6]	BODY AS-PISTON
2N-2765	[4]	BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)
3G-2292	[5]	BOLT-LOCKING (3/8-16X0.87-IN)
5P-4255	[8]	BOLT-LOCKING (3/8-16X1-IN)
4N-0685	[6]	BUSHING (1-IN WIDE)
4N-6658	[1]	BUSHING (1.3-IN WIDE)
131-7123	[1]	BUSHING
8C-3445	[1]	CAP-DUST
9M-2904	[2]	CLAMP-HOSE
1R-1808	[1]	FILTER-ENGINE OIL (ADVANCED EFFICIENCY)
1R-0749	[1]	FILTER-FUEL (ADVANCED EFFICIENCY)
1P-0436	[1]	GASKET (FUEL PRIMING PUMP)
1S-4295	[1]	GASKET (TURBOCHARGER)
1W-1898	[1]	GASKET
1W-5908	[1]	GASKET
2A-1162	[2]	GASKET (DRAIN PLUG)
2M-1395	[1]	GASKET
2N-8204	[6]	GASKET
2N-8630	[2]	GASKET
2P-3760	[2]	GASKET
2P-4305	[2]	GASKET
2S-0795	[2]	GASKET
2W-0459	[1]	GASKET
4H-6145	[1]	GASKET
4H-9541	[1]	GASKET
4N-0641	[1]	GASKET (TEMPERATURE REGULATOR)
4N-0699	[8]	GASKET
4N-0933	[4]	GASKET
4N-1151	[1]	GASKET (ENGINE OIL PAN)
4N-4725	[1]	GASKET
5H-0244	[1]	GASKET
6B-2250	[2]	GASKET
6L-9589	[2]	GASKET
7C-0307	[4]	GASKET (REGULATOR HOUSING, OUTLET)
7N-7559	[1]	GASKET
7W-0688	[2]	GASKET
7W-5733	[1]	GASKET
7W-6081	[1]	GASKET
9H-8872	[1]	GASKET
9Y-6089	[1]	GASKET
153-5484	[2]	GASKET
155-5619	[1]	GASKET (FLYWHEEL HOUSING)
166-9142	[1]	GASKET
166-9146	[1]	GASKET
341-9211	[4]	GASKET
4N-7253	[6]	GASKET-CHAMBER
4N-2695	[1]	GASKET-COVER
6I-3066	[1]	GASKET-CYLINDER HEAD
129-9452	[6]	GASKET-EXHAUST MANIFOLD
1S-4810	[1]	GASKET-OIL DRAIN
1S-6595	[1]	GASKET-OIL SUPPLY
6I-4024	[1]	GASKET-PLATE
4N-1156	[1]	GASKET-REGULATOR COVER
371-8115 E		HOSE (10-CM)
197-9322	[6]	LINER-CYLINDER BLOCK
2N-2766	[16]	LOCKNUT (3/8-16-THD)
8N-1608	[6]	PIN-PISTON
165-6170	[3]	PLUG
0L-1022	[4]	PLUG-CUP
7W-6534	[5]	PLUG-PIPE
7X-7732	[6]	PLUG-PIPE
8T-6757	[3]	PLUG-PIPE
248-5513	[1]	REGULATOR-TEMPERATURE (92-DEG C)
9Y-1792	[1]	RETAINER
7E-5665	[12]	RETAINER-PIN
2P-2817	[6]	RING-PISTON (INTERMEDIATE)
7N-7078	[6]	RING-PISTON (OIL CONTROL)
346-3340	[6]	RING-PISTON (TOP)
5P-5678 D		SEAL (3-M)
359-1439	[24]	SEAL AS-WATER (WATER)
9L-9098	[6]	SEAL-CARBON STOP
142-5867	[1]	SEAL-CRANKSHAFT (FRONT)
142-5868	[1]	SEAL-CRANKSHAFT (REAR)(REAR)
125-0434	[2]	SEAL-INTEGRAL
126-2702	[6]	SEAL-INTEGRAL
129-3948	[1]	SEAL-INTEGRAL
234-8937	[1]	SEAL-INTEGRAL
110-2220	[6]	SEAL-LINER
142-7072	[6]	SEAL-LINER
3S-9643	[1]	SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR)
1H-7339	[1]	SEAL-O-RING
2N-3350	[3]	SEAL-O-RING
2S-4078	[1]	SEAL-O-RING
3J-7354	[2]	SEAL-O-RING
3S-5496	[6]	SEAL-O-RING
4L-8337	[2]	SEAL-O-RING
4M-8303	[1]	SEAL-O-RING
5K-9090	[2]	SEAL-O-RING
5P-4889	[1]	SEAL-O-RING
5P-5846	[2]	SEAL-O-RING
5P-7204	[2]	SEAL-O-RING
5P-7813	[2]	SEAL-O-RING
5P-8068	[3]	SEAL-O-RING
5S-1188	[2]	SEAL-O-RING
6L-7817	[2]	SEAL-O-RING
6V-3319	[1]	SEAL-O-RING
6V-3830	[1]	SEAL-O-RING
6V-3831	[1]	SEAL-O-RING
6V-9769	[4]	SEAL-O-RING
7L-4774	[6]	SEAL-O-RING
8C-5196	[1]	SEAL-O-RING
8C-5230	[2]	SEAL-O-RING
8L-2779	[6]	SEAL-O-RING
8M-4447	[2]	SEAL-O-RING
9M-3786	[1]	SEAL-O-RING
9X-7378	[2]	SEAL-O-RING
061-7539	[1]	SEAL-O-RING
109-0076	[1]	SEAL-O-RING
109-0077	[3]	SEAL-O-RING
109-0078	[8]	SEAL-O-RING
113-5304	[2]	SEAL-O-RING
114-2687	[1]	SEAL-O-RING
114-3362	[6]	SEAL-O-RING
114-4427	[3]	SEAL-O-RING
117-1385	[6]	SEAL-O-RING
118-5068	[1]	SEAL-O-RING
119-5155	[1]	SEAL-O-RING
122-3772	[1]	SEAL-O-RING
142-6217	[6]	SEAL-O-RING
147-0182	[2]	SEAL-O-RING
156-5198	[2]	SEAL-O-RING
214-7566	[2]	SEAL-O-RING
214-7567	[2]	SEAL-O-RING
214-7568	[6]	SEAL-O-RING
238-5081	[2]	SEAL-O-RING
238-5082	[2]	SEAL-O-RING
238-5083	[1]	SEAL-O-RING
250-0466	[2]	SEAL-O-RING
4W-2754	[1]	SEAL-QUAD RING
9X-7715	[1]	SEAL-QUAD RING
271-2489	[6]	SEAL-WASHER
194-8124	[6]	SLEEVE AS (EXHAUST PORT)
2S-3770	[1]	SPACER (11X19X33.5-MM THK)
108-3612	[11]	SPACER (11.13X19.05X53-MM THK)
305-6843	[12]	SPRING-GUIDE
4S-6137	[1]	STUD-TAPERLOCK (3/8-16X3.1-IN)
106-1792	[11]	STUD-TAPERLOCK (3/8-16X4-IN)
290-6567	[6]	TUBE AS-OIL JET
7W-4482	[6]	WASHER (17.14X9.76X3.18-MM THK)
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)
5M-2894	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7W-4487	[6]	WASHER-SPECIAL (9.76X17.14X1.27-MM THK)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

		**OVERHAUL KITS FOR ENGINES (2W-1004*) WITH WIDE JOURNAL CONNECTING RODS ONLY.
		ENGINE SERIAL NUMBER 11N00480 & UP. FOR EARLIER ENGINE SERIAL NUMBERS CONTACT THE REMAN HELP LINE AT
		(888) 88-REMAN OR E-MAIL AT REMAN_HELP@CAT.COM****
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER
R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP19660078

425-5673: KIT-FRONT COVER GASKET

KIT-FRONT COVER GASKET

425-5673 KIT-FRONT COVER GASKET
S/N 8CJ1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD REPLACEMENT FOR @@@@@234-1983@@@@@

i05545191 SEBP1966

For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
1W-1898	[1]	GASKET
1W-5908	[1]	GASKET
2W-0459	[1]	GASKET
4N-0933	[1]	GASKET
6B-2250	[2]	GASKET
7C-0307	[1]	GASKET (REGULATOR HOUSING, OUTLET)
7W-5733	[1]	GASKET
166-9142	[1]	GASKET
166-9146	[1]	GASKET
4N-1156	[1]	GASKET-REGULATOR COVER
142-5867	[1]	SEAL-CRANKSHAFT (FRONT)(FRONT)
1H-7339	[1]	SEAL-O-RING
4M-8303	[1]	SEAL-O-RING
109-0077	[2]	SEAL-O-RING
122-3772	[1]	SEAL-O-RING
147-0182	[1]	SEAL-O-RING
214-7566	[1]	SEAL-O-RING
230-3728	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED