6I-0085 PUMP GP-FUEL INJECTION S/N 11N1-1315 PART OF 6I-0087 PUMP GP-GOV & FUEL INJ 980F WHEEL LOADER



FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
GOVERNOR GP
TANK GP-FUEL
TORQUE CONTROL GP

WHEEL LOADER 980F WHEEL LOADER 8CJ
 980F Wheel Loader 8CJ00001-UP (MACHINE) POWERED BY 3406 Engine SEBP1966 980F 8CJ   (1991)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-8138 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-8138 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-0085 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
377-9401 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-8224 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-8524 PUMP GP-GOV & FUEL INJ
 

#SEBP19660190
 

6I-0085: PUMP GP-FUEL INJECTION

6I-0085 PUMP GP-FUEL INJECTION
S/N 11N1-1315
PART OF 6I-0087 PUMP GP-GOV & FUEL INJ
i00169706 SEBP1966
6I0085 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5887 [1] HOUSING GP-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 7E-6002 [1] BUSHING (REAR)  
5. 7E-6003 [1] BUSHING (CENTER)  
6. 7E-6004 [1] BUSHING (FRONT)  
7. 4P-7045 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 4P-8480 [6] PIN-PUMP GUIDE  
10. 1W-5785 [1] COVER  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG  
13. 4J-7533 [1] SEAL-O-RING  
14. 8E-5237 [2] RACE-THRUST BEARING  
15. 7L-3326 [1] BEARING-THRUST  
16. 9N-1545 [2] RACE-THRUST BEARING  
17. 3S-8022 [1] BEARING-THRUST  
18. 4P-2948 [1] RING-GUIDE  
19. 6I-0086 [1] CAMSHAFT  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT (1/4-20X0.875-IN)  
22. 1H-9696 [2] SEAL-O-RING  
23. 4P-2899 [6] BUSHING-TERMINAL  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT (1/4-20X0.75-IN)  
28. 9S-4182 [2] PLUG (7/16-20-THD)  
29. 7E-4847 [6] SEAL-O-RING  
30. 4P-7681 Y [6] PUMP GP-FUEL INJECTION  
31. 1J-9671 [1] SEAL-O-RING  
32. 9S-8003 [1] PLUG (1/2-20-THD)  
33. 7J-0204 [2] SEAL-O-RING  
34. 9S-8007 [2] PLUG  
35. 7E-6011 [6] LIFTER AS  
36. 7E-9907 [6] SPACER (34.8X42.125X6.76-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19660191
 

4N-3287: PUMP GP-FUEL PRIMING

4N-3287 PUMP GP-FUEL PRIMING
S/N 8CJ1-99999
PART OF 4P-0933 INSTALLATION AR-ENGINE
i00107921 SEBP1966
4N3287 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
3. 7X-2501 [1] BOLT (1/4-20X1.25-IN)  
4. 105-2508 [1] PUMP AS-FUEL PRIMING  
5. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP19660192
 

1W-1700: PUMP GP-FUEL TRANSFER

1W-1700 PUMP GP-FUEL TRANSFER
S/N 11N1-99999; A5N1-UP; A5Y1-UP
PART OF 2W-4381 PUMP & MTG GP-FUEL TRANSFER
i00121976 SEBP1966
1W1700 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-1698 [1] HOUSING-TRANSFER PUMP  
2. 1W-1699 [1] COVER  
3. 1W-5910 [1] GUIDE & TAPPET AS  
  7N-8821 [1] RING-RETAINING  
4. 6J-2419 [1] SEAL-O-RING  
5. 7E-2464 C [3] VALVE AS-CHECK (FUEL TRANSFER PUMP)  
6. 3D-2824 [1] SEAL-O-RING  
7. 6F-6672 [1] SEAL-O-RING  
8. 3D-2898 [1] SEAL-O-RING  
9. 5P-8215 [1] SEAL-O-RING  
10. 7W-0134 [1] SPRING-PUMP  
11. 8N-2637 [1] WASHER (21.3X29.5X1.6-MM THK)  
12. 7E-3667 C [1] SPACER (25.46X28.86X1.84-MM THK)  
13. 8N-2641 [1] SLEEVE  
14. 1W-1669 [1] PISTON  
15. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
16. 6D-8498 [2] SCREW-HEAD  
17. 8N-2640 [1] COVER  
18. 7E-4656 C [1] RETAINER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19660193
 

377-9401: PUMP GP-GOV & FUEL INJ

377-9401 PUMP GP-GOV & FUEL INJ
S/N 11N17857-UP; A5N1-UP; A5Y1-UP
PART OF 371-4110 ENGINE AR
i04553960 SEBP1966
3779401 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6659 Y [1] TORQUE CONTROL GP  
2. 2W-9657 [1] SPRING-DETENT  
3. 4P-8138 Y [1] PUMP GP-FUEL INJECTION  
4. 8M-9140 [1] SPRING  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 8N-6680 [1] SCREEN AS  
7. 8N-9682 Y [1] GOVERNOR GP  
8. 144-0477 [1] GASKET  
9. 033-5879 [1] SEAL-O-RING  
10. 1B-2716 [2] BOLT (1/4-20X5-IN)  
11. 238-5078 [1] SEAL-O-RING  
12. 2D-6392 [1] SEAL-O-RING  
13. 5B-7040 [2] BOLT (1/4-20X1-IN)  
14. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
15. 5P-6620 [1] SEAL-O-RING  
16. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
17. 7B-2742 [2] BOLT (1/4-20X1.25-IN)  
18. 7X-0869 [1] BOLT-LOCKING (1/4-20X2-IN)  
19. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
20. 8J-8343 [1] SEAL-O-RING  
21. 8L-5832 [1] NUT-HEX (10-32-THD)  
22. 8M-8515 [1] SEAL-O-RING  
23. 8S-4710 [4] BOLT (1/4-20X4-IN)  
24. 9S-8001 [1] PLUG  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19660194
 

4P-8224: PUMP GP-GOV & FUEL INJ

4P-8224 PUMP GP-GOV & FUEL INJ
S/N 11N1-99999
PART OF 4P-7980 ENGINE AR
i00169672 SEBP1966
4P8224 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-8138 Y [1] PUMP GP-FUEL INJECTION  
2. 5P-6620 [1] SEAL-O-RING  
  2D-6392 [1] SEAL-O-RING  
  8N-6680 [1] SCREEN AS  
3. 8M-9140 [1] SPRING  
4. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
5. 8N-9382 [1] GASKET  
6. 8M-8515 [1] SEAL-O-RING  
7. 2W-5448 [1] COVER  
  7E-6785 [1] GASKET  
8. 2W-6659 Y [1] TORQUE CONTROL GP  
9. 8N-9682 Y [1] GOVERNOR GP  
10. 9Y-1234 Y [1] FASTENER GP-FUEL INJ PUMP  
11. 2W-9657 [1] SPRING-DETENT  
12. 033-5879 [1] SEAL-O-RING  
13. 8J-8343 [1] SEAL-O-RING  
   
  8N-3799 F [1] COVER-FUEL RATIO  
  9S-8001 F [1] PLUG  
  4J-7533 F [1] SEAL-O-RING  
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19660195
 

4P-8524: PUMP GP-GOV & FUEL INJ

4P-8524 PUMP GP-GOV & FUEL INJ
S/N 11N1316-99999
PART OF 104-1750, 4P-8980 ENGINE AR
i00169673 SEBP1966
4P8524 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-8138 Y [1] PUMP GP-FUEL INJECTION  
2. 5P-6620 [1] SEAL-O-RING  
  2D-6392 [1] SEAL-O-RING  
  8N-6680 [1] SCREEN AS  
3. 8M-9140 [1] SPRING  
4. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
5. 8N-9382 [1] GASKET  
6. 7W-2831 Y [1] CONTROL GP-FUEL RATIO  
7. 2W-5448 [1] COVER  
  7E-6785 [1] GASKET  
8. 2W-6659 Y [1] TORQUE CONTROL GP  
9. 2W-7325 Y [1] GOVERNOR GP  
10. 9Y-4913 Y [1] FASTENER GP-FUEL INJ PUMP  
11. 2W-9657 [1] SPRING-DETENT  
12. 033-5879 [1] SEAL-O-RING  
13. 8J-8343 [1] SEAL-O-RING  
14. 8M-8515 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19660196
 

6I-0087: PUMP GP-GOV & FUEL INJ

6I-0087 PUMP GP-GOV & FUEL INJ
S/N 11N1-1315
PART OF 4P-8980 ENGINE AR
i00169707 SEBP1966
6I0087 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0085 Y [1] PUMP GP-FUEL INJECTION  
2. 5P-6620 [1] SEAL-O-RING  
  2D-6392 [1] SEAL-O-RING  
  8N-6680 [1] SCREEN AS  
3. 8M-9140 [1] SPRING  
4. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
5. 8N-9382 [1] GASKET  
6. 7W-2831 Y [1] CONTROL GP-FUEL RATIO  
7. 2W-5448 [1] COVER  
  7E-6785 [1] GASKET  
8. 2W-6659 Y [1] TORQUE CONTROL GP  
9. 2W-7325 Y [1] GOVERNOR GP  
10. 9Y-4913 Y [1] FASTENER GP-FUEL INJ PUMP  
11. 2W-9657 [1] SPRING-DETENT  
12. 033-5879 [1] SEAL-O-RING  
13. 8J-8343 [1] SEAL-O-RING  
14. 8M-8515 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19660197
 

4E-2324: TANK GP-FUEL

4E-2324 TANK GP-FUEL
S/N 8CJ1-99999
400 LITERS (104 GALS)
PART OF 4E-2313 CHASSIS AR
i00169594 SEBP1966
4E2324 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-2891 [1] TANK AS-FUEL  
2. 7X-7700 [1] CAP AS-FUEL (LOCKABLE, VENTED)  
  9X-8600 [1] SEAL-O-RING  
  9X-2205 [1] KIT-CAP FILTER (FUEL TANK)  
3. 4H-9027 [2] PLUG-PIPE  
4. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
5. 7X-0345 [2] BOLT (5/8-11X1.75-IN)  
  7X-0448 [2] NUT (5/8-11-THD)  
6. 8T-4122 [7] WASHER-HARD (17X32X3.5-MM THK)  
7. 8C-3210 M [6] BOLT (M6X1X16-MM)  
  8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 8T-9393 [3] BOLT (5/8-11X1.5-IN)  
9. 9S-9334 [1] PLUG  
10. 1H-8306 [1] SCREW-PURGE (1/2-20X1.625-IN)  
11. 7M-8485 [1] SEAL-O-RING  
12. 3E-5305 [1] SENDER AS  
  6C-3060 [1] GASKET  
  M   METRIC PART
 

#SEBP19660198
 

8E-7415: TANK GP-FUEL

8E-7415 TANK GP-FUEL
S/N 8CJ1-99999
457 LITERS (118.82 GALS)
PART OF 4E-3077 LOADER AR-LOG, 4E-8458 LOADER AR-MATERIAL HANDLING
i00169792 SEBP1966
8E7415 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-7416 [1] TANK AS-FUEL  
2. 7X-7700 [1] CAP AS-FUEL (LOCKABLE, VENTED)  
  9X-8600 [1] SEAL-O-RING  
  9X-2205 [1] KIT-CAP FILTER (FUEL TANK)  
3. 4H-9027 [2] PLUG-PIPE  
4. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
5. 7X-0345 [2] BOLT (5/8-11X1.75-IN)  
  7X-0448 [2] NUT (5/8-11-THD)  
6. 8T-4122 [7] WASHER-HARD (17X32X3.5-MM THK)  
7. 6V-7727 M [6] BOLT (M6X1X16-MM)  
  8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 8T-9393 [3] BOLT (5/8-11X1.5-IN)  
9. 9S-9334 [1] PLUG  
10. 1H-8306 [1] SCREW-PURGE (1/2-20X1.625-IN)  
11. 7M-8485 [1] SEAL-O-RING  
12. 124-8227 L [1] SENDER AS-LEVEL  
  6C-3060 [1] GASKET  
   
    AVAILABLE REPAIR KIT(S):
  139-8665 L [1] KIT-DIAL SENSOR  
  L   REPAIR KIT MARKED L AVAILABLE FOR PART MARKED L
  M   METRIC PART
 

#SEBP19660199
 

2W-6659: TORQUE CONTROL GP

2W-6659 TORQUE CONTROL GP
S/N 11N1-UP; A5N1-UP; A5Y1-UP
PART OF 377-9401, 4P-8224, 4P-8524, 6I-0087 PUMP GP-GOV & FUEL INJ
i00158180 SEBP1966
2W6659 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 980F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6452 [1] INSULATOR  
2. 6L-5897 C [2] BOLT (1/4-20X0.875-IN)  
3. 8M-9062 [1] RETAINER-SPRING (3.05-MM THK)  
4. 2W-7234 C [1] BAR-LOAD STOP (4-MM)  
5. 2P-2685 [1] SPACER (0.635-MM THK)  
6. 8N-7519 [1] SPRING-TORQUE (0.635-MM THK)  
7. 7N-1796 [1] SPACER (1.549-MM THK)  
8. 7W-8405 C [1] CONTACT  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
The Procedure for the Removal of the Electronic Unit Injector has Changed. {1290}
2004/05/10
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog 980F :

PUMP GP-FUEL INJECTION
4P-8138 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-8138 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-7681 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
108-6633 PUMP GP-FUEL INJECTION
PUMP & MTG GP-FUEL TRANSFER
2W-4381 PUMP & MTG GP-FUEL TRANSFER
NOZZLE AS-FUEL VALVE
4W-7017 NOZZLE AS-FUEL VALVE
LINES GP-FUEL INJECTION
4P-9660 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9659 LINES GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
1W-1700 PUMP GP-FUEL TRANSFER
PUMP GP-GOV & FUEL INJ
377-9401 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-8224 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-8524 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6I-0087 PUMP GP-GOV & FUEL INJ
TANK GP-FUEL
4E-2324 TANK GP-FUEL
TANK GP-FUEL
8E-7415 TANK GP-FUEL

Truck sale:

Caterpillar 980F, Construction
40,000 USD 
Caterpillar 980F, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
CATERPILLAR 980F 1992
 
CATERPILLAR 980F 1992
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
N C MACHINERY
- Billings - United States
CATERPILLAR 980F 1992
 
CATERPILLAR 980F 1992
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MAQUINARIA Y TRACTORES, LTDA.
1991 CAT 980F
USD $35,500 
1991 CAT 980F

4M Iron
Charleston, South Carolina
1994 CAT 980F
USD $24,000 
1994 CAT 980F

C&C Machinery LLC