7T4748 LINES GP-PIN PULLER CYLINDER TYPE 3 PART OF 7T4747 PULLER AR-PIN AN ATTACHMENT D8N TRACK-TYPE TRACTOR

HYDRAULIC SYSTEM

LINES GP-CYLINDER

0. 7T-4748 LINES GP-P

CYLINDER GP

1. 8E-3039 CYLINDER A
2. 8E-6153 MOUNTING G
3. 6I-8788 MOUNTING G
4. 6E-0397 CYLINDER G
5. 9T-6077 CYLINDER G
6. 6E-1175 CYLINDER G
7. 6E-1175 CYLINDER G
8. 9T-0142 CYLINDER G
9. 9T-0142 CYLINDER G
0. INFORMATION

TRACK-TYPE TRACTOR D8N TRACK-TYPE TRACTOR 5TJ
D8N TRACTOR / POWER SHIFT / 5TJ00001-UP (MACHINE) POWERED BY 3406 ENGINE SEBP1968 D8N 5TJ (1991)

HYDRAULIC SYSTEM

LINES GP-CYLINDER

8E-1808 LINES GP-LIFT CYLINDER

8E-6152 LINES GP-TILT CYLINDER

6Y-3523 LINES GP-TILT CYLINDER

8E-6579 LINES GP-TILT CYLINDER

7T-4748 LINES GP-PIN PULLER CYLINDER

#SEBP19680420

7T-4748: LINES GP-PIN PULLER CYLINDER

LINES GP-PIN PULLER CYLINDER

7T4748 LINES GP-PIN PULLER CYLINDER
TYPE 3
PART OF 7T4747 PULLER AR-PIN
AN ATTACHMENT

c595762 SEBP1968

7T4748 LINES GP-PIN PULLER CYLINDER Parts scheme

For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8723	[2]	ELBOW
	3K-0360	[2]	SEAL-O-RING
2.	8T-2502	[1]	BOLT
3.	114-9415 C	[1]	BRACKET AS
	9F-2978	[2]	NUT-WELD
4.	4L-6454	[6]	BOLT
	8T-4896	[6]	WASHER-HARD
5.	7X-0772 C	[2]	WASHER-HARD
6.	6V-0683	[2]	GROMMET
	5P-7462	[2]	CLIP (SLOT)
	5P-7463	[2]	CLIP (TAB)
7.	8T-4121 C	[2]	WASHER
8.	4L-6459	[1]	BOLT
9.	6V-0974	[3]	GROMMET
	3G-8054	[3]	CLIP (TAB)
	3G-8057	[3]	CLIP (SLOT)
10.	112-8007	[1]	SPACER (36 MM LONG)
11.	7K-1181 CB	[3]	STRAP-CABLE
12.	9W-3726 I	[2]	HOSE AS
13.	6V-8636	[2]	CONNECTOR
	3J-1907	[2]	SEAL-O-RING (11.89MM ID)
14.	8T-4137 CM	[2]	BOLT
15.	6V-8397	[4]	SEAL-O-RING (12.83MM OD)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	I		SEE HOSE FABRICATION GUIDE
	M		METRIC PART

#SEBP19680421

8E-3039: CYLINDER AR-TILT

CYLINDER AR-TILT

8E3039 CYLINDER AR-TILT
DUAL
AN ATTACHMENT

SEBP19680421 SEBP1968

For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name


6E-0397 Y	[2]	CYLINDER GP-TILT
		-OR-
9T-6077 Y	[2]	CYLINDER GP-TILT


8E-6579 Y	[1]	LINES GP-TILT CYLINDER
Y		SEPARATE ILLUSTRATION

#SEBP19680422

8E-6153: MOUNTING GP-CYLINDER

MOUNTING GP-CYLINDER

8E6153 MOUNTING GP-CYLINDER
BULLDOZER S/N 6AH1-99999,6LH1-99999,6NH1-99999
PART OF 8E3036, 8E3037, 8E3038 BULLDOZER ARS
AN ATTACHMENT

c555439 SEBP1968

8E6153 MOUNTING GP-CYLINDER Parts scheme

For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6Y-2939	[2]	YOKE
2.	8E-6185	[4]	CAP AS
			(EACH INCLUDES)
3.	3J-8508	[1]	BEARING-SLEEVE
4.	4T-4875	[2]	PIN
5.	3B-8489	[2]	FITTING-GREASE
6.	6V-0273	[2]	SEAL-LIP TYPE
7.	8T-8919	[2]	BOLT
	6V-8188	[2]	NUT
8.	5P-1076	[1]	WASHER-HARD
9.	8E-6305	[1]	PLATE-RH
	8E-6306	[1]	PLATE-LH
10.	5P-2566	[1]	BOLT (RH SIDE-NOTE J)
11.	8E-6303	[2]	CLIP (TAB)
	8E-6304	[2]	CLIP (SLOT)
12.	8T-9313	[8]	BOLT
13.	8T-4223	[4]	WASHER-HARD

			NOTE J-LH SIDE WILL
			USE BOLT FROM TILT
			CYL. LINES GP.

#SEBP19680423

6I-8788: MOUNTING GP-CYLINDER

MOUNTING GP-CYLINDER

6I8788 MOUNTING GP-CYLINDER
BULLDOZER S/N 9AH1-UP,9BH1-UP,9CH1-UP
PART OF 6I8789, 6I8790, 6I8791 BULLDOZER ARS
AN ATTACHMENT

c571618 SEBP1968

6I8788 MOUNTING GP-CYLINDER Parts scheme

For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6Y-5693	[2]	YOKE
2.	8E-6185	[4]	CAP AS
			(EACH INCLUDES)
3.	104-1844	[1]	BEARING-SLEEVE
4.	4T-4875	[2]	PIN
5.	3B-8489	[2]	FITTING-GREASE
6.	6V-0273	[2]	SEAL-LIP TYPE
7.	8T-9313	[8]	BOLT
8.	5P-1076	[1]	WASHER-HARD
9.	8E-6305	[1]	PLATE-RH
	8E-6306	[1]	PLATE-LH
10.	5P-2566 J	[1]	BOLT (RH SIDE-NOTE J)

			NOTE J-LH SIDE WILL
			USE BOLT FROM TILT
			CYL. LINES GP.

#SEBP19680424

6E-0397: CYLINDER GP-TILT

CYLINDER GP-TILT

6E0397 CYLINDER GP-TILT (CHGS 01-05)
184.15 MM (7.25 IN) BORE X 175 MM (6.9 IN) STROKE
S/N 5TJ1-631,636-642,644-676,678-700,702-712,714-718,720-739,741,742,`
744-773,775-UP
PART OF 8E3039 CYLINDER AR-TILT. AN ATTACHMENT

c655735 SEBP1968

For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6E-0398	[1]	CYLINDER AS
2.	1U-2182	[2]	BEARING-SLEEVE
3.	9T-5900	[1]	WASHER
4.	132-5180	[1]	PISTON AS
5.	5J-4993	[1]	SEAL AS
	5J-4407	[1]	RING-EXPANDER
6.	8H-3532	[1]	SPRING-VALVE
7.	9T-4977	[1]	PLUNGER
8.	132-5183	[1]	PLUNGER
9.	3S-7023	[4]	WASHER
10.	106-3881	[1]	ROD AS
11.	8T-0672 M	[4]	BOLT
12.	8J-9013	[1]	CAP-BEARING
13.	8J-9180 B	[14]	SHIM
14.	7X-0851 M	[4]	NUT
15.	1J-2674	[1]	RING-WEAR
16.	8C-5218	[1]	SEAL-LIP
17.	5J-8300	[1]	SEAL-U-CUP
18.	8C-9126	[1]	SEAL AS
19.	9T-0094	[1]	RING-WEAR
20.	2J-0564	[1]	LOCKNUT
21.	2K-2939	[1]	SEAL-O-RING
22.	2K-2940	[1]	RING-BACKUP
23.	6E-0402	[1]	HEAD
24.	8C-3222 M	[4]	BOLT (M30X3.5X80MM)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP19680425

9T-6077: CYLINDER GP-TILT

CYLINDER GP-TILT

9T6077 CYLINDER GP-TILT (CHG 03)
165.1 MM (6.50 IN.) BORE X 175 MM (6.89 IN.) STROKE
S/N 5TJ632-635,643,677,701,713,719,740,743,774
PART OF 8E3039 CYLINDER AR-TILT
AN ATTACHMENT

c562274 SEBP1968

For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-5908	[1]	CYLINDER AS
	1U-2182	[2]	BEARING-SLEEVE
2.	2J-0564	[1]	NUT-SELF LOCKING
3.	3J-9703	[1]	RING-WEAR
4.	7J-8956 C	[1]	SEAL-O-RING
5.	9T-5901	[1]	PISTON AS
	5J-4991	[1]	SEAL AS
6.	9T-5900	[1]	WASHER
7.	9T-5904	[1]	ROD AS
8.	6E-5527 C	[1]	HEAD
9.	9T-0094	[1]	RING-WEAR
10.	1D-4709	[4]	BOLT
	5P-8250	[4]	WASHER
11.	6J-6915	[1]	SEAL-RING
12.	1B-4333	[4]	NUT
13.	8J-9013	[1]	CAP-BEARING
14.	5B-5473	[4]	BOLT
15.	8J-9180 B	[14]	SHIM
16.	2J-1411	[1]	SEAL-LIP TYPE
17.	5J-8300	[1]	SEAL-U-CUP
18.	7J-8955 C	[1]	RING-BACK-UP
19.	8T-8379 C	[1]	SEAL-HEAD
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP19680426

6E-1175: CYLINDER GP-TILT

CYLINDER GP-TILT

6E1175 CYLINDER GP-TILT (CHG 01)
184.15 MM (7.25 IN) BORE X 195 MM (7.7 IN) STROKE
BULLDOZER S/N 6AH1-99999,6LH1-99999,9BH1-UP,9CH1-UP
PART OF 8E3040 PUSH ARM
AN ATTACHMENT

c509496 SEBP1968

For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6E-1176	[1]	CYLINDER AS
2.	1U-2182	[2]	BEARING-SLEEVE
3.	6E-1183	[1]	PISTON
4.	2K-2939	[1]	SEAL-O-RING
5.	2K-2940	[1]	RING-BACK-UP
6.	6E-1184	[1]	HEAD
7.	6E-1901	[1]	ROD AS
	5J-9454	[1]	RING-RETAINING
8.	6V-3340	[1]	BEARING-SPHERICAL
9.	6V-3669 M	[8]	BOLT
	8T-3282	[8]	WASHER-HARD
10.	8T-1790	[1]	SEAL AS
11.	1J-2674	[1]	RING-WEAR
12.	8C-5219	[1]	SEAL-LIP TYPE
13.	5J-8350	[1]	SEAL
14.	8C-9127	[1]	SEAL AS
15.	8C-5245	[1]	RING-WEAR
16.	4J-6888	[1]	NUT-SELF LOCKING
	M		METRIC PART

#SEBP19680427

6E-1175: CYLINDER GP-TILT

CYLINDER GP-TILT

6E1175 CYLINDER GP-TILT (CHG 02-03)
184.15 MM (7.25 IN) BORE X 195 MM (7.7 IN) STROKE
BULLDOZER S/N 9BH1-UP,9CH1-UP
PART OF 8E3040, 1183173 PUSH ARMS
AN ATTACHMENT

c692375 SEBP1968

For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6E-1176	[1]	CYLINDER AS
2.	1U-2182	[2]	BEARING-SLEEVE
3.	6E-1183	[1]	PISTON
4.	5P-7593	[1]	SEAL-O-RING (170.82MM ID)
5.	1U-1738	[1]	RING-BACKUP
6.	6E-6201	[1]	HEAD
7.	6E-1901	[1]	ROD AS
	5J-9454	[1]	RING-RETAINING
8.	6V-3340	[1]	BEARING-SPHERICAL
9.	6V-3669 M	[8]	BOLT (M20X2.5X80MM)
	8T-3282	[8]	WASHER-HARD (3.5MM THK)
10.	8T-1790	[1]	SEAL AS
11.	1J-2674	[1]	RING-WEAR
12.	8C-5219	[1]	SEAL-LIP
13.	5J-8350	[1]	SEAL (88.9MM ID)
14.	8C-9127	[1]	SEAL AS
15.	8C-5245	[1]	RING-WEAR
16.	4J-6888	[1]	LOCKNUT
17.	8T-8381	[1]	SEAL-HEAD (180.46MM ID)
18.	7S-6369	[4]	WASHER (4.8MM THK)
19.	2H-3755	[4]	BOLT (5/16-18X.625IN)
20.	3B-8489	[1]	FITTING-GREASE (1/8-27 THD)
	M		METRIC PART

#SEBP19680428

9T-0142: CYLINDER GP-RIPPER LIFT

CYLINDER GP-RIPPER LIFT

9T0142 CYLINDER GP-RIPPER LIFT (CHGS 00-05)
184 MM (7 IN.) BORE X 281 MM (11 IN.) STROKE
TYPE 1. RIPPER S/N 1FH1-UP,1GH1-UP
PART OF 6Y9458, 8E1588 RIPPER ARS
AN ATTACHMENT

c555990 SEBP1968

9T0142 CYLINDER GP-RIPPER LIFT Parts scheme

For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2J-7686	[1]	LOCKNUT
2.	1J-2674	[1]	RING-WEAR
3.	5J-4993	[1]	SEAL AS
	5J-4407	[1]	RING-EXPANDER
4.	1U-2716	[1]	PISTON
5.	6J-9121	[1]	WASHER
6.	9T-0579 R	[1]	CYLINDER AS
	9T-0610	[1]	BEARING
7.	2K-2939	[1]	SEAL-O-RING (177.39MM ID)
8.	2K-2940	[1]	RING
9.	8C-9126	[1]	SEAL AS
10.	9T-0584 R	[1]	ROD AS
	3G-5999	[1]	BEARING-SLEEVE
11.	8C-5218	[1]	SEAL-LIP
12.	1D-4608	[8]	BOLT (3/4-10X2.75IN)
13.	5J-8300	[1]	SEAL-U-CUP
14.	9T-0586	[1]	HEAD
15.	8T-1714	[1]	RING-WEAR
16.	3B-8489	[1]	FITTING-GREASE (1/8-27 THD)
17.	4H-3947	[1]	FITTING
	R		REMFG PART MAY BE AVAILABLE

#SEBP19680429

9T-0142: CYLINDER GP-RIPPER LIFT

CYLINDER GP-RIPPER LIFT

9T0142 CYLINDER GP-RIPPER LIFT (CHGS 06-10)
184 MM (7 IN.) BORE X 281 MM (11 IN.) STROKE
TYPE 2. RIPPER S/N 1FH1-UP,1GH1-UP
PART OF 6Y9458, 8E1588 RIPPER ARS
AN ATTACHMENT

c595547 SEBP1968

For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2J-7686	[1]	LOCKNUT
2.	1J-2674	[1]	RING-WEAR
3.	5J-4993	[1]	SEAL AS
	5J-4407	[1]	RING-EXPANDER
4.	1U-2716	[1]	PISTON
5.	6J-9121	[1]	WASHER (63.73X107.95X8.74MM THK)
6.	9T-0579 R	[1]	CYLINDER AS
	3G-5999	[1]	BEARING-SLEEVE
7.	5P-7593	[1]	SEAL-O-RING
8.	1U-1738	[1]	RING-BACKUP
9.	8C-9126	[1]	SEAL AS
10.	9T-0584 R	[1]	ROD AS
	3G-5999	[1]	BEARING-SLEEVE
11.	8C-5218	[1]	SEAL-LIP
12.	1D-4608	[8]	BOLT (3/4-10X2.75 IN)
13.	5J-8300	[1]	SEAL-U-CUP
14.	101-0051	[1]	HEAD
15.	8T-1714	[1]	RING-WEAR
16.	3B-8489 C	[2]	FITTING-GREASE (1/8-27 THD)
17.	5S-7382 C	[8]	BOLT (3/8-16X1.375 IN)
	8T-4896 C	[8]	WASHER-HARD (10.2X18.5X2.5MM THK)
18.	2H-3755 C	[4]	BOLT (5/16-18X0.62 IN)
19.	7S-6369 C	[4]	WASHER (.344X.75X.188 IN THK)
20.	8T-8381 C	[1]	SEAL
21.	1P-4577 C	[4]	FLANGE-HALF
22.	4J-0520 C	[2]	SEAL-O-RING
	5H-4019 C	[2]	COVER
	C		CHANGE FROM PREVIOUS TYPE
	R		REMFG PART MAY BE AVAILABLE