AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6Y9458 RIPPER AR SINGLE SHANK. RIPPER S/N 1FH1-UP AN ATTACHMENT D8N TRACK-TYPE TRACTOR


WORK TOOLS
RIPPER GP
GROUND ENGAGING TOOLS (G.E.T.)
IMPLEMENTS
KITS
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)

TRACK-TYPE TRACTOR D8N TRACK-TYPE TRACTOR 5TJ
 D8N TRACTOR / POWER SHIFT / 5TJ00001-UP (MACHINE) POWERED BY 3406 ENGINE SEBP1968 D8N 5TJ   (1991)

WORK TOOLS

RIPPER GP
8E-1588 RIPPER AR
6Y-9458 RIPPER AR
RIPPER GP
7T-2583 RIPPER GP
RIPPER GP
7T-2447 RIPPER GP
MOUNTING GP-RIPPER
7T-2462 MOUNTING GP-RIPPER
 

#SEBP19680530
 

6Y-9458: RIPPER AR

6Y9458 RIPPER AR
SINGLE SHANK. RIPPER S/N 1FH1-UP
AN ATTACHMENT
SEBP19680530 SEBP1968
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  9T-0142 Y [2] CYLINDER GP-RIPPER LIFT  
   
  9T-0143 Y [2] CYLINDER GP-RIPPER TILT  
   
  7T-3744 Y [1] FRAME GP-RIPPER  
   
  8E-4650 Y [1] LINES GP-RIPPER  
   
  7T-2462 Y [1] MOUNTING GP-RIPPER  
   
  7T-2583 Y [1] RIPPER GP  
   
  5P-1327 [1] PLATE-RIPPER NUMBER  
    ON CYLINDER TOWER
   
  4B-4158 [2] SCREW-DRIVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19680531
 

7T-2583: RIPPER GP

7T2583 RIPPER GP
RIPPER S/N 1FH1-UP
4T8986-PAGE 311
PART OF 6Y9458 RIPPER AR. AN ATTACHMENT
c346792 SEBP1968
7T2583 RIPPER GP Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-2584 [1] CARRIAGE AS  
2. 3J-6035 [2] RETAINER  
3. 2J-1227 [2] RETAINER  
4. 7T-8641 [2] BRACKET AS  
    (EACH INCLUDES)
  3J-5169 [2] NUT  
5. 4T-9668 [1] PIN-G.E.T.  
6. 4T-2479 [2] PIN AS  
  5J-3576 [1] SPRING  
7. 4T-8986 Y [1] TOOTH GP-RIPPER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19680532
 

7T-2447: RIPPER GP

7T2447 RIPPER GP
RIPPER S/N 1GH1-UP
4T8987-PAGE 311.01
PART OF 8E1588 RIPPER AR. AN ATTACHMENT
c509373 SEBP1968
7T2447 RIPPER GP Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-8987 Y [1] TOOTH GP-RIPPER  
2. 8E-1586 [1] BEAM AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19680533
 

4T-8986: TOOTH GP-RIPPER

4T8986 TOOTH GP-RIPPER
RIPPER S/N 1FH2724-UP
PART OF 7T2583 RIPPER
AN ATTACHMENT
c573476 SEBP1968
4T8986 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-3394 [3] PIN-G.E.T.  
2. 8E-4743 [3] RETAINER-G.E.T.  
3. 9W-2451 [1] TIP-RIPPER  
4. 8E-1848 [1] PROTECTOR  
5. 8E-5347 [1] SHANK AS-RIPPER  
6. 3G-5596 [1] LUG  
 

#SEBP19680534
 

4T-8986: TOOTH GP-RIPPER

4T8986 TOOTH GP-RIPPER
RIPPER S/N 1FH1-2723
PART OF 7T2583 RIPPER
AN ATTACHMENT
c524157 SEBP1968
4T8986 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2479 [2] PIN AS  
    (EACH INCLUDES)
  5J-3576 [1] SPRING  
2. 6J-8811 [1] PIN AS  
  6J-8809 [1] SPRING  
3. 9W-2451 [1] TIP-RIPPER  
4. 8E-1848 [1] PROTECTOR  
5. 4T-8989 [1] SHANK AS-RIPPER  
6. 3G-5596 [1] LUG  
7. 4T-8315 [1] ADAPTER  
 

#SEBP19680535
 

4T-8987: TOOTH GP-RIPPER

4T8987 TOOTH GP-RIPPER
RIPPER S/N 1GH1908-UP
PART OF 7T2447 RIPPER
AN ATTACHMENT
c576365 SEBP1968
4T8987 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2479 [2] PIN AS  
    (EACH INCLUDES)
  5J-3576 [1] SPRING  
2. 6Y-3394 C [3] PIN-G.E.T.  
3. 9W-2452 [1] TIP-RIPPER  
4. 8E-1848 [1] PROTECTOR  
5. 8E-5346 C [1] SHANK AS-RIPPER  
6. 3G-5596 [1] LUG  
7. 8E-4743 C [3] RETAINER-G.E.T.  
8. 6J-6680 [1] PIN  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19680536
 

4T-8987: TOOTH GP-RIPPER

4T8987 TOOTH GP-RIPPER
RIPPER S/N 1GH1-1907
PART OF 7T2447 RIPPER. 8E5770 ABRASION RIPPER TIP IS AVAILABLE
AN ATTACHMENT
c524168 SEBP1968
4T8987 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2479 [4] PIN AS  
    (EACH INCLUDES)
  5J-3576 [1] SPRING  
2. 6J-8811 [1] PIN AS  
3. 9W-2452 [1] TIP-RIPPER  
4. 8E-1848 [1] PROTECTOR  
5. 4T-8990 [1] SHANK AS-RIPPER  
6. 3G-5596 [1] LUG  
7. 4T-8315 [1] ADAPTER  
8. 6J-6680 [1] PIN  
 

#SEBP19680537
 

112-6647: KIT-OVERPACK

1126647 KIT-OVERPACK
FOR USE WITH ANY D8 RIPPER
AN ATTACHMENT
SEBP19680537 SEBP1968
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-6454 [11] BOLT (3/8-16 X 1.0 IN)  
  4L-6459 [1] BOLT (3/8-16 X 2.5 IN)  
  5S-7382 [16] BOLT (3/8-16 X 1.37 IN)  
  7X-0345 [4] BOLT (5/8-11 X 1.75 IN)  
  7X-0365 [12] BOLT (3/4-10 X 1.50 IN)  
  7X-0366 [6] BOLT (3/4-10 X 2.0 IN)  
  7X-0377 [2] BOLT (3/4-10 X 6.5 IN)  
  8T-4137 [2] BOLT (M10-1.5 X 20 MM)  
  6K-0138 [4] BOLT-SELF LOCKING (5/8-11 X 1.25 IN)  
  8T-8924 [4] BOLT (3/4-10 X 2.50 IN)  
  8T-9393 [2] BOLT (5/8-11 X 1.50 IN)  
  8T-9398 [2] BOLT (3/4-10 X 1.75 IN)  
  3G-8054 [3] CLIP (TAB)  
  3G-8057 [3] CLIP (SLOT)  
  5P-7462 [2] CLIP (SLOT)  
  5P-7463 [2] CLIP (TAB)  
  6V-8636 [2] CONNECTOR-SEAL  
  6F-4161 [2] DOWEL  
  6V-8723 [2] ELBOW-FACE SEAL  
  1P-4576 [4] FLANGE-HALF (32.5 MM ID)  
  1P-4577 [9] FLANGE-HALF (38.9 MM ID)  
  6V-0683 [2] GROMMET (SINGLE OPENING)  
  6V-0974 [3] GROMMET (DOUBLE OPENING)  
  1K-6870 [2] LOCKNUT (3/4-10 THD)  
  6V-8182 [4] NUT-FULL (3/4-10 THD)  
  7H-7539 [12] NUT-FULL (1 1/4-12 THD)  
  7T-4501 [1] PIN (90 MM LG)  
  7T-4502 [1] PIN (183 MM LG)  
  8E-8914 [2] PIN (5/8-11-2B THD BOTH ENDS)  
  4T-2479 [2] PIN AS  
    EACH INCLUDES
  [1] SPRING  
  125-9215 [1] PIN  
  7T-7305 [6] PLATE  
  8E-4743 [3] RETAINER-G.E.T.  
  6K-3630 [1] RING-RETAINING  
  7J-4169 [2] RING-SNAP  
  3E-6756 [12] SEAL-LIP TYPE (76.2 MM ID)  
  3E-6757 [6] SEAL-LIP TYPE (88.9 MM ID)  
  3J-1907 [2] SEAL-O-RING (11.89 MM ID)  
  3K-0360 [2] SEAL-O-RING (16.36 MM ID)  
  4J-0520 [6] SEAL-O-RING (32.92 MM ID)  
  4J-5267 [8] SEAL-O-RING (24.99 MM ID)  
  6V-8397 [4] SEAL-O-RING (9.27 MM ID)  
  7K-1181 [3] STRAP-CABLE  
  7T-5790 [12] STUD-TAPERLOCK  
  4T-3522 [12] WASHER (WITH TAB)  
  7X-0515 [8] WASHER-HARD (35 MM OD)  
  7X-0533 [12] WASHER-HARD (55 MM OD)  
  7X-0537 [1] WASHER-HARD (67 MM OD)  
  7X-0582 [12] WASHER-HARD (44.5 MM OD)  
  7X-0772 [8] WASHER-HARD (25.5 MM OD)  
  8T-4121 [2] WASHER-HARD (21 MM OD)  
  8T-4167 [2] WASHER-HARD (44 MM OD)  
  8T-4896 [15] WASHER-HARD (18.5 MM OD)  
  8T-4994 [2] WASHER-HARD (36.5 MM OD)  
 

#SEBP19680538
 

4T-0137: TOOTH GP-RIPPER

4T0137 TOOTH GP-RIPPER
TYPE 2
FOR USE WITH 7T4747 PIN PULLER AR
AN ATTACHMENT
c595108 SEBP1968
4T0137 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-3394 C [3] PIN-G.E.T.  
2. 8E-4743 C [3] RETAINER-G.E.T.  
3. 9W-2451 [1] TIP-RIPPER  
4. 8E-1848 [1] PROTECTOR  
5. 8E-5340 C [1] SHANK AS-RIPPER  
6. 3G-5596 [1] LUG  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19680539
 

4T-0137: TOOTH GP-RIPPER

4T0137 TOOTH GP-RIPPER
TYPE 1
FOR USE WITH 7T4747 PIN PULLER AR
AN ATTACHMENT
c524162 SEBP1968
4T0137 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2479 C [2] PIN AS  
    (EACH INCLUDES)
  5J-3576 [1] SPRING  
2. 6J-8811 [1] PIN AS  
  6J-8809 [1] SPRING  
3. 9W-2451 C [1] TIP-RIPPER  
4. 8E-1848 [1] PROTECTOR  
5. 4T-0134 [1] SHANK AS-RIPPER  
6. 3G-5596 [1] LUG  
7. 4T-8315 [1] ADAPTER  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Caterpillar Parts SIS Catalog D8N :

8E-1588 RIPPER AR
GUIDE GP-ROLLER
8P-2397 GUIDE GP-ROLLER
FAIRLEAD GP-WINCH
6T-9295 FAIRLEAD GP-WINCH
COVER GP-SHIPPING
7G-1181 COVER GP-SHIPPING
CLUTCH & GEAR GP
7G-4775 CLUTCH & GEAR GP
CLUTCH & GEAR GP
7G-4775 CLUTCH & GEAR GP
CLUTCH & GEAR GP
7G-4775 CLUTCH & GEAR GP
CLUTCH & GEAR GP
7G-4775 CLUTCH & GEAR GP
RIPPER GP
7T-2583 RIPPER GP
RIPPER GP
7T-2447 RIPPER GP
TOOTH GP-RIPPER
4T-8986 TOOTH GP-RIPPER
TOOTH GP-RIPPER
4T-8986 TOOTH GP-RIPPER
TOOTH GP-RIPPER
4T-8987 TOOTH GP-RIPPER
TOOTH GP-RIPPER
4T-8987 TOOTH GP-RIPPER
112-6647 KIT-OVERPACK
TOOTH GP-RIPPER
4T-0137 TOOTH GP-RIPPER

Truck sale:

Caterpillar D8N
 
Caterpillar D8N
- Crawler dozers
MILTON CAT
Caterpillar D8N, Crawler dozers, Construction
172,500 
Caterpillar D8N, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D8N, Crawler dozers, Construction
54,500 
Caterpillar D8N, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D8N, Crawler dozers, Construction
75,000 
Caterpillar D8N, Crawler dozers, Construction
- Crawler dozers
FOLEY, INC.
Caterpillar D8N, Crawler dozers, Construction
108,771 
Caterpillar D8N, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.