AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3T-0283 CONTROL GP-TRANSMISSION HYD S/N 1FX1325-UP PART OF 8E-9035 TRANSMISSION AR 776C TRACTOR


POWER TRAIN
CONTROL GP-TRANSMISSION HYD
TRANSMISSION GP
WHEEL GP
DIFFERENTIAL & BEVEL GEAR GP
DRIVE GP-FINAL
FILTER & LINES GP-TORQUE CONV

TRACTOR 776C TRACTOR 2TK
 777C Truck 776C Tractor 2TK00001-UP (MACHINE) POWERED BY 3508 Engine SEBP1969 776C 2TK   (1992)

POWER TRAIN

CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
3T-0283 CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
3T-0283 CONTROL GP-TRANSMISSION HYD
VALVE GP-TRANSMISSION CONTROL
9W-8590 VALVE GP-TRANSMISSION CONTROL
 

#SEBP19690550
 

3T-0283: CONTROL GP-TRANSMISSION HYD

3T-0283 CONTROL GP-TRANSMISSION HYD
S/N 1FX1325-UP
PART OF 8E-9035 TRANSMISSION AR
i00094435 SEBP1969
3T0283 CONTROL GP-TRANSMISSION HYD Parts scheme 3T0283 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 776C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-1120 Y [2] VALVE GP-SOLENOID (TRANSMISSION UPSHIFT/DOWNSHIFT)  
2. 9F-2773 [4] BOLT (3/8-16X8.5-IN)  
  5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 9S-8001 [5] PLUG  
  4J-7533 [5] SEAL-O-RING  
4. 8M-4438 [2] SEAL-O-RING  
5. 3T-0918 [2] SLEEVE  
6. 3T-0919 [1] SLEEVE  
  6V-4365 [2] SEAL-O-RING  
7. 8M-8157 [4] SEAL-O-RING  
8. 7T-0049 [1] SLEEVE  
9. 7G-3375 [3] SLEEVE  
  8M-5254 [6] SEAL-O-RING  
10. 2H-3927 [1] SEAL-O-RING  
11. 9G-9928 [1] FLANGE-ONE PIECE  
12. 0S-1594 [2] BOLT (3/8-16X1-IN)  
13. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 9G-9150 [2] CLIP  
15. 6Y-0789 [1] PLUG  
16. 3D-2824 [1] SEAL-O-RING  
17. 3P-0647 [1] SEAL-O-RING  
18. 6T-8823 [1] GUARD AS  
19. 9W-8590 Y [1] VALVE GP-TRANSMISSION CONTROL (SHIFT CONTROL)  
20. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
  9L-9132 [2] WASHER (10.2X25.5X2.5-MM THK)  
21. 9U-9714 [1] MANIFOLD AS  
  5P-7661 [1] BEARING AS-NEEDLE  
22. 9S-8005 [5] PLUG (3/4-16-THD)  
23. 3K-0360 [5] SEAL-O-RING  
24. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
25. 9S-8001 [5] PLUG  
  4J-7533 [5] SEAL-O-RING  
26. 6V-0852 [1] CAP-DUST  
27. 3J-1907 [2] SEAL-O-RING  
28. 0S-1617 [6] BOLT (5/16-18X0.75-IN)  
29. 9S-8004 [1] PLUG (9/16-18-THD)  
30. 6Y-9850 [1] COUPLING AS  
31. 8S-5575 [1] SEAL-LIP TYPE  
32. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
33. 3D-4197 [1] COVER  
34. 120-9288 C [1] HARNESS AS-TRANSMISSION  
  8M-4988 [1] SEAL-O-RING  
35. 118-8471 CY [1] SENSOR GP-POSITION (TRANSMISSION GEAR)  
36. 7S-5757 [1] RING-RETAINING  
37. 6T-5132 [1] COVER  
  6T-5133 [1] GASKET  
38. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
39. 5F-7054 [5] SEAL-O-RING  
40. 0S-1619 [2] BOLT (3/8-16X3-IN)  
41. 0S-1594 [4] BOLT (3/8-16X1-IN)  
42. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
43. 9L-9132 [2] WASHER (10.2X25.5X2.5-MM THK)  
44. 8M-4446 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  5S-3674 [1] KIT-SOLENOID VALVE  
    (INCL WRENCH, SLEEVE, SPRING, PLUNGER & SEAL)
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19690551
 

9W-4331: COVER GP-SHIPPING

9W-4331 COVER GP-SHIPPING
S/N 1FX1-UP
PART OF 8E-9035 TRANSMISSION AR
i00094507 SEBP1969
9W4331 COVER GP-SHIPPING Parts scheme
  For full view, you need register

Parts for your 776C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1621 [4] BOLT (1/2-13X1-IN)  
2. 8E-7367 [1] GASKET  
3. 7J-0402 [1] COVER  
4. 9W-4330 [1] COVER AS  
  1P-8654 [1] EYE-LIFTING  
5. 2A-1538 [12] BOLT (3/4-10X2.25-IN)  
6. 2J-3506 [12] NUT-FULL (3/4-10-THD)  
7. 5D-6176 [1] COVER  
8. 5P-5846 [1] SEAL-O-RING  
9. 1A-1460 [4] BOLT (1/2-13X2-IN)  
10. 148-8411 [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  9S-4185 [1] PLUG (3/4-16-THD)  
11. 5D-6428 [1] SEAL-O-RING  
 

#SEBP19690552
 

118-7753: COVER GP-WHEEL

118-7753 COVER GP-WHEEL
S/N 2TK1-UP
PART OF 124-7639, 126-6577 GEAR AR-RUNNING
AN ATTACHMENT
i00110860 SEBP1969
  For full view, you need register

Parts for your 776C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2G-6203 [2] CARRIER-PLANETARY  
  2G-5886 [2] COVER  
  2A-1162 [2] GASKET  
  2A-3398 [2] GASKET  
  285-5509 [2] HUB  
  1F-7958 [18] NUT-FULL (1/2-13-THD)  
  2J-3506 [68] NUT-FULL (3/4-10-THD)  
  5F-0304 [2] PLUG  
  8M-3837 [2] PLUG-MAGNETIC (FINAL DRIVE)  
  9X-7550 [2] SEAL-O-RING  
  6F-6672 [2] SEAL-O-RING  
  3D-3295 [2] SEAL-O-RING  
  2D-8153 [18] STUD-TAPERLOCK (1/2-13X1.77-IN)  
  5P-8245 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
  5P-8248 [68] WASHER-HARD (20X36.5X3.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP19690553
 

104-9410: DIFFERENTIAL & BEVEL GEAR GP

104-9410 DIFFERENTIAL & BEVEL GEAR GP
S/N 4XJ366-UP; 2TK80-UP
PART OF 8X-8000 POWER TRAIN AR
i00094523 SEBP1969
1049410 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 776C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-3506 [26] NUT-FULL (3/4-10-THD)  
2. 5P-8248 [40] WASHER-HARD (20X36.5X3.5-MM THK)  
3. 3D-9553 [1] CAGE-BEARING  
4. 3D-9552 [1] RING-ADJUSTMENT  
5. 9M-2744 [1] CONE-BEARING (TAPERED ROLLER)  
6. 7S-8554 [1] SEAL-O-RING  
7. 7D-3029 [1] PIN-THRUST  
8. 2H-3932 [1] SEAL-O-RING  
9. 0S-1585 [2] BOLT (1/2-13X1.5-IN)  
10. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 8M-3391 [1] COVER  
12. 9M-5874 B [1] SHIM PACK (INCLUDES 30-SHIMS)  
13. 8X-9088 [1] GEAR-DIFFERENTIAL BEVEL (52-TEETH)  
14. 6G-7565 Y [1] DIFFERENTIAL GP  
15. 9X-7395 [1] SEAL AS  
16. 6K-7917 [2] BOLT-LOCKING (1/2-13X1-IN)  
17. 9K-4454 [1] LOCK  
18. 5T-3769 [1] LOCK  
19. 2D-9457 [1] CONE-BEARING (TAPERED ROLLER)  
20. 2J-2152 [1] CUP-BEARING  
21. 8W-3064 [1] RING-ADJUSTMENT  
22. 2D-9459 [1] CAGE-BEARING  
23. 104-9404 [1] PINION AS (19 TEETH)  
  1J-7450 [1] PLUG-CUP  
24. 104-9406 [1] CARRIER AS-DIFFERENTIAL  
  4D-0537 [2] DOWEL  
25. 6D-8428 [1] CAP-BEARING  
26. 9D-0769 [1] CAP-BEARING  
27. 8F-4486 [4] BOLT (1-1/8-7X6.5-IN)  
28. 3D-5692 [4] BUSHING-TERMINAL  
29. 3S-1349 [4] WASHER-HARD (31X52.5X6-MM THK)  
30. 8D-4154 [14] BOLT (3/4-16X2.75-IN)  
31. 5D-7453 [1] CONE-BEARING  
32. 8S-9092 [16] BOLT (5/8-11X2.25-IN)  
33. 2D-6506 [1] SEAL-O-RING  
34. 2D-8364 [1] SEAL-O-RING  
35. 112-8224 B [10] SHIM  
36. 104-9409 [1] CAGE-BEARING  
37. 1M-6573 [1] CUP-BEARING (TAPERED ROLLER)  
38. 4F-2041 [1] CUP-BEARING (TAPERED ROLLER)  
39. 1B-6577 [1] CONE-BEARING  
40. 2K-0337 [14] LOCKNUT (3/4-16-THD)  
41. 5D-7449 [1] CUP-BEARING  
42. 5P-8247 [16] WASHER-HARD (17X32X3.5-MM THK)  
43. 112-8223 B [10] SHIM  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP19690554
 

9D-2315: DIFFERENTIAL & BEVEL GEAR GP

9D-2315 DIFFERENTIAL & BEVEL GEAR GP
S/N 4XJ1-365; 2TK1-UP
PART OF 8X-8000 POWER TRAIN AR
i00109563 SEBP1969
9D2315 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 776C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5D-7465 [1] SEAL-OIL (5.53-IN ID)  
2. 5D-7466 [1] RING  
3. 7S-8554 [1] SEAL-O-RING  
4. 2J-3506 [26] NUT-FULL (3/4-10-THD)  
5. 3D-9553 [1] CAGE-BEARING  
6. 3D-9552 [1] RING-ADJUSTMENT  
7. 1M-6573 [1] CUP-BEARING (TAPERED ROLLER)  
  9M-2744 [1] CONE-BEARING (TAPERED ROLLER)  
8. 9M-5874 B [1] SHIM PACK (INCLUDES 30-SHIMS)  
9. 8M-3391 [1] COVER  
10. 0S-1585 [2] BOLT (1/2-13X1.5-IN)  
11. 2H-3932 [1] SEAL-O-RING  
12. 7D-3029 [1] PIN-THRUST  
13. 8X-9088 C [1] GEAR-DIFFERENTIAL BEVEL (52-TEETH)(52 TEETH)  
14. 8D-4154 [14] BOLT (3/4-16X2.75-IN)  
  2K-0337 [14] LOCKNUT (3/4-16-THD)  
15. 6G-7565 Y [1] DIFFERENTIAL GP  
16. 5T-4282 [1] CAGE-BEARING  
17. 6K-7917 [2] BOLT-LOCKING (1/2-13X1-IN)  
18. 5T-3769 [1] LOCK  
19. 5P-8248 [40] WASHER-HARD (20X36.5X3.5-MM THK)  
20. 8W-3064 C [1] RING-ADJUSTMENT  
21. 2D-9457 [1] CONE-BEARING (TAPERED ROLLER)  
  4F-2041 [1] CUP-BEARING (TAPERED ROLLER)  
22. 2D-9459 [1] CAGE-BEARING  
23. 5D-7449 [1] CUP-BEARING  
  5D-7453 [1] CONE-BEARING  
24. 8X-9467 C [1] PINION AS  
25. 1J-7450 [1] PLUG-CUP  
26. 2D-6506 [1] SEAL-O-RING  
27. 2D-8364 [1] SEAL-O-RING  
28. 1B-6577 [1] CONE-BEARING  
  2J-2152 [1] CUP-BEARING  
29. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 9K-4454 [1] LOCK  
31. 5D-7458 B [10] SHIM (.127MM THK)  
  5D-7459 B [10] SHIM (.178MM THK)  
32. 1A-1460 [12] BOLT (1/2-13X2-IN)  
33. 5T-7839 [1] CARRIER AS-DIFFERENTIAL  
34. 4D-0537 [2] DOWEL  
35. 8F-4486 [4] BOLT (1-1/8-7X6.5-IN)  
  3S-1349 [4] WASHER-HARD (31X52.5X6-MM THK)  
36. 3D-5692 [4] BUSHING-TERMINAL  
37. 9D-0769 [1] CAP-BEARING  
38. 6D-8428 [1] CAP-BEARING  
39. 1S-4305 [12] SPACER (0.531X1X0.56-IN THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19690555
 

6G-7565: DIFFERENTIAL GP

6G-7565 DIFFERENTIAL GP
S/N 4XJ1-UP; 2TK1-UP
PART OF 104-9410, 9D-2315 DIFFERENTIAL & BEVEL GEAR GP
i00094454 SEBP1969
6G7565 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 776C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-7472 [1] HOUSING AS-DIFFERENTIAL  
2. 3D-6509 [6] DOWEL  
3. 4D-7541 [4] RETAINER  
4. 5T-9437 [1] SPIDER-DIFFERENTIAL  
5. 8X-7790 [1] HOUSING AS-DIFFERENTIAL  
6. 3D-6509 [2] DOWEL  
7. 3D-8513 [2] WASHER-THRUST (4.59X8.56X0.146-IN THK)  
8. 8W-9149 [2] GEAR-DIFFERENTIAL BEVEL (24-TEETH)(24-TEETH)  
9. 6G-5483 [8] BOLT (3/4-16X10.5-IN)  
10. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
11. 2K-0337 [8] LOCKNUT (3/4-16-THD)  
12. 107-2958 [4] NUT (2-1/8-12-THD)  
13. 4D-7536 [4] LOCKNUT  
14. 8W-9151 [4] PINION-DIFFERENTIAL (19-TEETH)(19-TEETH)  
15. 4D-7534 [4] BEARING AS-ROLLER  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP19690556
 

107-8544: DRIVE GP-FINAL

107-8544 DRIVE GP-FINAL
S/N 4XJ343-UP; 2TK80-UP
PART OF 8X-8000 POWER TRAIN AR
i00110850 SEBP1969
1078544 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 776C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-7947 [1] SHAFT-AXLE (RH)  
2. 8X-7948 [1] SHAFT-AXLE (RH)(LH)  
3. 2G-6208 [2] SPACER (3.13X4.12X0.625-IN THK)  
4. 106-6528 [2] HUB  
5. 5T-7676 [8] RETAINER  
6. 6K-7917 [16] BOLT-LOCKING (1/2-13X1-IN)  
7. 2G-5886 [2] COVER  
8. 4D-0449 [2] SEAL-O-RING  
9. 159-7448 [2] GEAR (18-TEETH)(SUN)  
10. 7D-6705 [2] RING-RETAINING  
11. 2G-4553 [2] PLATE  
12. 2G-6202 [2] SPACER (2.25X4.88X0.323-IN THK)  
13. 0S-1588 [8] BOLT (3/8-16X1.25-IN)  
14. 4D-0608 [6] RING-RETAINING  
15. 102-2236 [6] SHAFT-PLANETARY  
16. 6V-8188 [18] NUT (1/2-13-THD)  
17. 8T-4223 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 2D-8153 [18] STUD-TAPERLOCK (1/2-13X1.77-IN)  
19. 2G-6203 [2] CARRIER-PLANETARY  
20. 3D-3295 [2] SEAL-O-RING  
21. 2G-6204 [2] GEAR-RING (108-TEETH)  
22. 117-0751 [6] GEAR-PLANETARY (44-TEETH)  
23. 8X-7931 [18] SPACER (102.31X128.3X5.574-MM THK)  
24. 8E-7945 [12] BEARING-INNER  
25. 5F-0304 [2] PLUG (FINAL DRIVE)  
26. 2A-1162 [2] GASKET  
27. 6F-6672 [2] SEAL-O-RING  
28. 2J-3506 [68] NUT-FULL (3/4-10-THD)  
29. 8M-3837 [2] PLUG-MAGNETIC (FINAL DRIVE FILL)  
30. 2A-3398 [2] GASKET  
31. 5P-8248 [68] WASHER-HARD (20X36.5X3.5-MM THK)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP19690557
 

8X-7884: DRIVE GP-FINAL

8X-7884 DRIVE GP-FINAL
S/N 4XJ1-342; 2TK1-79
PART OF 8X-8000 POWER TRAIN AR
i00109555 SEBP1969
8X7884 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 776C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-7947 [1] SHAFT-AXLE (RH)  
  8X-7948 [1] SHAFT-AXLE (RH)(LH)  
2. 102-2236 [6] SHAFT-PLANETARY  
3. 8E-7945 [12] BEARING-INNER  
4. 8X-7931 [18] SPACER (102.31X128.3X5.574-MM THK)  
5. 2G-6204 [2] GEAR-RING (108-TEETH)  
6. 3D-3295 [2] SEAL-O-RING  
7. 2J-3506 [68] NUT-FULL (3/4-10-THD)  
  5P-8248 [68] WASHER-HARD (20X36.5X3.5-MM THK)  
8. 2G-6203 [2] CARRIER-PLANETARY  
9. 2D-8153 [18] STUD-TAPERLOCK (1/2-13X1.77-IN)  
10. 1F-7958 [18] NUT-FULL (1/2-13-THD)  
  5P-8245 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 4D-0608 [6] RING-RETAINING  
12. 2G-4553 [2] PLATE  
13. 5P-1615 [8] BOLT-LOCKING (3/8-16X1.25-IN)  
14. 7D-6705 [2] RING-RETAINING  
15. 8M-3837 [2] PLUG-MAGNETIC  
  2A-3398 [2] GASKET  
16. 2G-5886 [2] COVER  
17. 4D-0449 [2] SEAL-O-RING  
18. 5F-0304 [2] PLUG  
  2A-1162 [2] GASKET  
19. 6F-6672 [2] SEAL-O-RING  
20. 6K-7917 [16] BOLT-LOCKING (1/2-13X1-IN)  
21. 5T-7676 [8] RETAINER  
22. 6G-9855 [2] GEAR-SUN (18-TEETH)  
23. 2G-6208 [2] SPACER (3.13X4.12X0.625-IN THK)  
24. 2G-6207 [2] HUB  
25. 8X-9157 [6] GEAR-PLANETARY (44-TEETH)  
26. 2G-6202 [2] SPACER (2.25X4.88X0.323-IN THK)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP19690558
 

8X-0363: FILTER & LINES GP-TORQUE CONV

8X-0363 FILTER & LINES GP-TORQUE CONV
S/N 4XJ1-340; 2TK1-75
PART OF 8W-9673, 8W-9678 HYDRAULIC AR
i00110817 SEBP1969
8X0363 FILTER & LINES GP-TORQUE CONV Parts scheme
  For full view, you need register

Parts for your 776C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-6791 I [1] HOSE AS  
  6V-8627 [2] ELBOW  
2. 6V-9004 [1] ELBOW  
3. 3J-1907 [3] SEAL-O-RING  
4. 8X-4575 [1] FILTER AS-BREATHER  
5. 9M-0164 [1] CLAMP-HOSE  
6. 8T-4896 [17] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 6V-8778 [1] TEE-FACE SEAL  
  6V-8944 [1] REDUCER  
  6V-8557 [1] NUT-FACE SEAL (1-7/16-12-THD)  
8. 7X-0294 [1] BOLT (3/8-16X5-IN)  
  1K-5888 [1] SPACER (0.42X0.67X0.63-IN THK)  
9. 5K-9090 [3] SEAL-O-RING  
10. 8X-4646 [1] BASE AS  
  8T-9379 [1] BOLT (3/8-16X4.25-IN)  
11. 6V-8398 [6] SEAL-O-RING  
12. 3J-7354 [1] SEAL-O-RING  
  8C-3446 [1] VALVE-SAMPLING  
  8C-3447 [1] CAP-DUST  
13. 6V-8775 [1] TEE-FACE SEAL  
14. 1P-4579 [6] FLANGE-HALF  
15. 4J-0524 [4] SEAL-O-RING  
16. 9B-7237 [5] BOLT (3/8-16X1.25-IN)  
17. 3P-0349 Y [1] VALVE GP-RELIEF  
18. 8M-4443 [2] SEAL-O-RING  
19. 8M-5254 [1] SEAL-O-RING  
  6V-0484 [1] ELBOW  
20. 6V-9746 [3] SEAL-O-RING  
21. 7X-0290 [7] BOLT (3/8-16X3.5-IN)  
22. 1P-4582 [4] FLANGE-HALF  
  4J-0527 [2] SEAL-O-RING  
23. 5T-4099 [1] TUBE AS  
  1J-2859 [1] SEAL-O-RING  
24. 5P-2566 [20] BOLT (1/2-13X1.5-IN)  
25. 5T-7900 I [1] HOSE AS  
26. 8X-6973 I [1] HOSE AS  
27. 8W-6649 I [1] HOSE AS  
28. 6V-8633 [1] CONNECTOR  
29. 8W-5163 I [1] HOSE AS  
30. 6V-8625 [2] ELBOW  
31. 7X-0346 [8] BOLT (5/8-11X2-IN)  
  8T-4122 [8] WASHER-HARD (17X32X3.5-MM THK)  
32. 6I-9168 Y [1] VALVE GP-LOCKUP CLUTCH & SOL  
  8M-4435 [2] SEAL-O-RING  
  7X-0296 [3] BOLT (3/8-16X5.5-IN)  
33. 4J-5477 [2] SEAL-O-RING  
34. 3K-0360 [3] SEAL-O-RING  
35. 4S-4455 [2] CLIP  
36. 4D-5371 [3] CLIP  
37. 6V-8637 [1] CONNECTOR  
38. 3D-2824 [3] SEAL-O-RING  
39. 5P-7470 [1] CLIP (SLOT)  
  5P-7471 [1] CLIP (TAB)  
  2W-5317 [1] STRAP  
40. 9M-2092 [1] SEAL-O-RING  
  8X-2950 [1] TUBE AS  
41. 4T-4760 Y [1] FILTER GP-OIL  
  5P-2228 [4] BOLT (1/2-13X1-IN)  
42. 8X-2799 I [1] HOSE AS  
43. 6V-8801 [1] NUT (3/8-16-THD)  
  7X-0772 [2] WASHER-HARD (10.2X25.5X2.5-MM THK)  
  5P-7703 [1] GROMMET (52-MM ID)  
44. 3P-0348 Y [1] VALVE GP-RELIEF  
45. 8M-8157 [2] SEAL-O-RING  
46. 8X-8040 I [1] HOSE AS  
47. 5T-7902 I [1] HOSE AS  
48. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 4J-5267 [1] SEAL-O-RING  
  1P-4576 [2] FLANGE-HALF  
50. 8X-6792 I [1] HOSE AS  
  6V-9008 [1] ELBOW  
51. 8X-2949 [1] TUBE  
52. 4K-7995 [2] HOSE  
  8T-4985 [4] CLAMP-HOSE  
53. 8X-1827 I [1] HOSE AS  
54. 7M-8485 [2] SEAL-O-RING  
55. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19690559
 

8X-0363: FILTER & LINES GP-TORQUE CONV

8X-0363 FILTER & LINES GP-TORQUE CONV
S/N 4XJ341-972; 2TK76-91
PART OF 8W-9673, 8W-9678 HYDRAULIC AR
i00110818 SEBP1969
8X0363 FILTER & LINES GP-TORQUE CONV Parts scheme
  For full view, you need register

Parts for your 776C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-6791 I [1] HOSE AS  
  6V-8627 [2] ELBOW  
2. 6V-9004 [1] ELBOW  
3. 3J-1907 [3] SEAL-O-RING  
4. 8X-4575 [1] FILTER AS-BREATHER  
5. 9M-0164 [1] CLAMP-HOSE  
6. 8T-4896 [17] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 6V-8778 [1] TEE-FACE SEAL  
  6V-8944 [1] REDUCER  
  6V-8557 [1] NUT-FACE SEAL (1-7/16-12-THD)  
8. 7X-0294 [1] BOLT (3/8-16X5-IN)  
  1K-5888 [1] SPACER (0.42X0.67X0.63-IN THK)  
9. 5K-9090 [3] SEAL-O-RING  
10. 8X-4646 [1] BASE AS  
  8T-9379 [1] BOLT (3/8-16X4.25-IN)  
11. 6V-8398 [6] SEAL-O-RING  
12. 3J-7354 [1] SEAL-O-RING  
  8C-3446 [1] VALVE-SAMPLING  
  8C-3447 [1] CAP-DUST  
13. 6V-8775 [1] TEE-FACE SEAL  
14. 1P-4579 [6] FLANGE-HALF  
15. 4J-0524 [4] SEAL-O-RING  
16. 9B-7237 [5] BOLT (3/8-16X1.25-IN)  
17. 3P-0349 Y [1] VALVE GP-RELIEF  
18. 8M-4443 [2] SEAL-O-RING  
19. 8M-5254 [1] SEAL-O-RING  
  6V-0484 [1] ELBOW  
20. 6V-9746 [3] SEAL-O-RING  
21. 7X-0290 [7] BOLT (3/8-16X3.5-IN)  
22. 1P-4582 [4] FLANGE-HALF  
  4J-0527 [2] SEAL-O-RING  
23. 5T-4099 [1] TUBE AS  
  1J-2859 [1] SEAL-O-RING  
24. 5P-2566 [20] BOLT (1/2-13X1.5-IN)  
25. 5T-7900 I [1] HOSE AS  
26. 8X-6973 I [1] HOSE AS  
27. 8W-6649 I [1] HOSE AS  
28. 6V-8633 [1] CONNECTOR  
29. 8W-5163 I [1] HOSE AS  
30. 6V-8625 [2] ELBOW  
31. 7X-0346 [8] BOLT (5/8-11X2-IN)  
  8T-4122 [8] WASHER-HARD (17X32X3.5-MM THK)  
32. 6I-9476 Y [1] VALVE GP-LOCKUP CLUTCH & SOL  
  8M-4435 [2] SEAL-O-RING  
  7X-0296 [3] BOLT (3/8-16X5.5-IN)  
33. 4J-5477 [2] SEAL-O-RING  
34. 3K-0360 [3] SEAL-O-RING  
35. 4S-4455 [2] CLIP  
36. 4D-5371 [3] CLIP  
37. 6V-8637 [1] CONNECTOR  
38. 3D-2824 [3] SEAL-O-RING  
39. 5P-7470 [1] CLIP (SLOT)  
  5P-7471 [1] CLIP (TAB)  
  2W-5317 [1] STRAP  
40. 9M-2092 [1] SEAL-O-RING  
  8X-2950 [1] TUBE AS  
41. 4T-4760 Y [1] FILTER GP-OIL  
  5P-2228 [4] BOLT (1/2-13X1-IN)  
42. 8X-2799 I [1] HOSE AS  
43. 6V-8801 [1] NUT (3/8-16-THD)  
  7X-0772 [2] WASHER-HARD (10.2X25.5X2.5-MM THK)  
  5P-7703 [1] GROMMET (52-MM ID)  
44. 3P-0348 Y [1] VALVE GP-RELIEF  
45. 8M-8157 [2] SEAL-O-RING  
46. 8X-8040 I [1] HOSE AS  
47. 5T-7902 I [1] HOSE AS  
48. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 4J-5267 [1] SEAL-O-RING  
  1P-4576 [2] FLANGE-HALF  
50. 8X-6792 I [1] HOSE AS  
  6V-9005 [1] ELBOW  
51. 8X-2949 [1] TUBE  
52. 4K-7995 [2] HOSE  
  8T-4985 [4] CLAMP-HOSE  
53. 8X-1827 I [1] HOSE AS  
54. 7M-8485 [2] SEAL-O-RING  
55. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 776C :

CONTROL GP-TRANSMISSION HYD
3T-0283 CONTROL GP-TRANSMISSION HYD
8X-7437 CONTROL AR-TRACTION
2A-6904 CONTROL AR-TRACTION
CASE & PARTS GP-PLANETARY
458-8995 CASE & PARTS GP-PLANETARY
CASE & PARTS GP-PLANETARY
3T-0281 CASE & PARTS GP-PLANETARY
ACTUATOR GP-ROTARY
9W-4119 ACTUATOR GP-ROTARY
WIRING GP-SENSOR
8X-8035 WIRING GP-SENSOR
WIRING GP-SENSOR
8X-8035 WIRING GP-SENSOR
COVER GP-SHIPPING
9W-4331 COVER GP-SHIPPING
118-7753 COVER GP-WHEEL
DIFFERENTIAL & BEVEL GEAR GP
104-9410 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
9D-2315 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GP
6G-7565 DIFFERENTIAL GP
DRIVE GP-FINAL
107-8544 DRIVE GP-FINAL
DRIVE GP-FINAL
8X-7884 DRIVE GP-FINAL
FILTER & LINES GP-TORQUE CONV
8X-0363 FILTER & LINES GP-TORQUE CONV

Truck sale:

 
 
CAT 776C

RD Williams Parts
 
 
1982 CAT 776C

HIGH TECH INDUSTRIES
Mexia, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.