HYDRAULIC SYSTEM
PUMP GPVALVE GP-BANK
VALVE GP-CONTROL
VALVE GP-CHECK
VALVE GP-RELIEF
IMPLEMENTS
BULLDOZER GPHYDRAULIC SYSTEM
PUMP GP#SEBP19750250
9J-5082: PUMP GP-VANE
Parts for your D4E SR TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4J-2395 | [1] | COVER | |
| 2. | 3G-2806 RY | [1] | CARTRIDGE GP (24 GPM) | |
| 3. | 3G-7242 | [1] | PLUG | |
| 4. | 8J-8623 | [1] | SHAFT | |
| 5. | 2B-2006 | [4] | BOLT | |
| 6. | 9J-5122 | [1] | BODY | |
| 7. | 4M-7652 | [1] | RING-RETAINING | |
| 8. | 1L-8497 | [1] | RING-SNAP | |
| 9. | 4J-0985 | [1] | BALL BEARING | |
| 10. | 4M-7648 | [1] | WASHER | |
| 11. | 3G-9193 | [1] | SEAL-LIP TYPE | |
| 12. | 5P-0903 | [1] | SEAL-LIP TYPE | |
| THE FOLLOWING REPAIR | ||||
| KIT IS AVAILABLE: | ||||
| 1U-0379 | [1] | KIT-FLEXPLATE | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP19750251
8J-8483: PUMP GP-VANE
8J8483 PUMP GP-VANE-SINGLE
9J5082-PAGE 152
PART OF 5Y1512 CONTROL AR-HYDRAULIC
AN ATTACHMENT
9J5082-PAGE 152
PART OF 5Y1512 CONTROL AR-HYDRAULIC
AN ATTACHMENT
Parts for your D4E SR TRACK-TYPE TRACTOR:
#SEBP19750252
3G-2806: CARTRIDGE GP-VANE PUMP
Parts for your D4E SR TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-3078 | [4] | SEAL-O-RING | |
| 2. | 3G-2192 | [4] | RETAINER-SEAL | |
| 3. | 9T-5041 | [2] | DOWEL | |
| 4. | 9T-5047 | [1] | PLATE-INLET | |
| 5. | 9T-5056 | [1] | KIT-VANE | |
| 6. | 9T-5073 | [1] | RING | |
| 7. | 6V-1197 | [1] | SEAL-O-RING | |
| 8. | 8J-4351 | [1] | SEAL-O-RING | |
| 9. | 9T-5086 | [1] | RING | |
| 10. | 9T-5090 | [1] | PLATE-OUTLET | |
| 11. | 3G-2193 | [1] | RING-SEAL | |
| 12. | 9T-5098 | [2] | FLEXPLATE | |
| 13. | 9T-5106 | [1] | ROTOR | |
| 14. | 9T-5111 | [2] | SCREW |
#SEBP19750253
4T-0911: VALVE GP-BANK 3
4T0911 VALVE GP-BANK-3
3G2705-PAGE 160, 9J0718-PAGE 158, 4T0484-PAGE 157,
8J9471-PAGE 159. PART OF 5Y1512 CONTROL AR-HYDRAULIC
AN ATTACHMENT
3G2705-PAGE 160, 9J0718-PAGE 158, 4T0484-PAGE 157,
8J9471-PAGE 159. PART OF 5Y1512 CONTROL AR-HYDRAULIC
AN ATTACHMENT
Parts for your D4E SR TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-5048 | [1] | MANIFOLD-OUTLET | |
| 2. | 9S-4181 | [1] | PLUG-O-RING | |
| 7M-8485 | [1] | SEAL-O-RING | ||
| 3. | 2P-8421 | [1] | ADAPTER-O-RING | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 4. | 9J-0718 Y | [2] | VALVE GP-CONTROL | |
| 5. | 4T-0484 Y | [1] | VALVE GP-CONTROL | |
| 6. | 3G-2705 Y | [1] | VALVE GP-RELIEF | |
| 7. | 2H-4145 | [1] | SEAL-O-RING | |
| 8. | 9J-0713 | [1] | ROD | |
| 1B-4205 | [2] | NUT | ||
| 9. | 9J-0703 | [2] | ROD | |
| 1B-4204 | [4] | NUT-FULL | ||
| 10. | 3G-5047 | [1] | MANIFOLD-INLET | |
| 11. | 9S-4191 | [1] | PLUG-O-RING | |
| 3J-1907 | [1] | SEAL | ||
| 12. | 8J-9471 CY | [1] | VALVE GP-CHECK | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP19750254
4T-0484: VALVE GP-CONTROL
Parts for your D4E SR TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5F-7054 | [2] | SEAL-O-RING | |
| 2. | 8J-9463 | [1] | SPRING | |
| 3. | 8J-9464 | [1] | POPPET | |
| 4. | 8J-9471 Y | [1] | VALVE GP-CHECK | |
| 5. | 8J-9472 | [1] | CAP-DETENT | |
| 6. | 4T-0485 | [1] | SPRING | |
| 7. | 8J-9476 | [1] | SLEEVE | |
| 8. | 8J-4455 | [1] | BALL | |
| 9. | 9J-0706 | [1] | RING-RETAINING | |
| 10. | 8J-9462 | [1] | PLUG-DETENT | |
| 11. | 2D-6642 | [4] | BALL | |
| 12. | 8J-9459 | [1] | PIN-DETENT | |
| 13. | 8J-9465 | [1] | SPRING | |
| 14. | 8J-9468 | [2] | RETAINER | |
| 15. | 4L-7124 | [2] | BOLT | |
| 16. | 8J-9474 | [1] | SPACER | |
| 17. | 4F-8946 | [1] | SEAL-O-RING | |
| 18. | 2H-4145 | [1] | SEAL-O-RING | |
| 19. | 005-8143 | [2] | PLATE-VALVE SEAL | |
| 20. | 8F-5758 | [2] | SCREW | |
| 21. | 032-9805 | [2] | SEAL-VALVE | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP19750255
9J-0718: VALVE GP-CONTROL
Parts for your D4E SR TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 032-9805 | [2] | SEAL-VALVE | |
| 2. | 5F-7054 | [2] | SEAL-O-RING | |
| 3. | 8J-9464 | [1] | POPPET | |
| 4. | 8J-9463 | [1] | SPRING | |
| 5. | 2H-4145 | [1] | SEAL-O-RING | |
| 6. | 6L-5897 | [2] | BOLT | |
| 7. | 005-8145 | [1] | SCREW | |
| 8. | 005-8141 | [1] | CAP | |
| 9. | 005-8146 | [1] | SPRING | |
| 10. | 005-8144 | [2] | SEAT | |
| 11. | 005-8143 | [2] | PLATE-VALVE SEAL | |
| 12. | 8F-5758 | [2] | SCREW |
#SEBP19750256
8J-9471: VALVE GP-CHECK
8J9471 VALVE GP-CHECK & RELIEF
PART OF 4T0911 VALVE-BANK-3 & 4T0484 VALVE-CONTROL
AN ATTACHMENT
PART OF 4T0911 VALVE-BANK-3 & 4T0484 VALVE-CONTROL
AN ATTACHMENT
#SEBP19750257
3G-2705: VALVE GP-RELIEF
#SEBP19750258
2Y-9139: BULLDOZER AR-ANGLING
#SEBP19750259
2Y-4043: BULLDOZER AR-ANGLING
Parts for your D4E SR TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2J-1136 Y | [1] | BLADE GP | ||
| 8J-6634 Y | [1] | BRACE GP | ||
| 4T-4574 Y | [2] | CYLINDER GP-LIFT | ||
| 5J-7379 Y | [1] | FRAME GP | ||
| 6J-8135 Y | [1] | MOUNTING GP-CYLINDER | ||
| 9J-2724 Y | [1] | TRUNNION GP | ||
| 2Y-9790 | [1] | PLATE-SERIAL NUMBER | ||
| BEHIND BLADE NEAR TOP OF RH EDGE | ||||
| 4B-4158 | [2] | SCREW | ||
| Y | SEPARATE ILLUSTRATION | |||
Information:
HYDRAULIC SYSTEM
PUMP GP
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Procedure to Fill Gear Pump with Oil Before Start-Up{5073}
Procedure to Fill Gear Pump with Oil Before Start-Up{5073}
Procedure to Fill Gear Pump with Oil Before Start-Up{5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Specifications
9J5083 Hydraulic Pump<BR> (Power Shift & Special Application Tractors)
140 & 143 HYDRAULIC CONTROL
140 & 143 HYDRAULIC CONTROL
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Service Magazine

