6I2477 PUMP GP-FUEL INJECTION-PART 3 OF 3 PART OF 6I2476 PUMP-FUEL INJECTION 426B BACKHOE LOADER

Part No	Qty	Parts name
	[1]	STUD
116-7101	[1]	NUT
116-7102	[1]	SEAL
116-7103	[1]	SHAFT
116-7104	[1]	ARM AS
116-7108	[1]	SHAFT
116-7109	[1]	BOLT
116-7110	[2]	NUT
116-7110	[2]	NUT
116-7111	[1]	BOLT
116-7112	[2]	SPACER
116-7114	[1]	LEVER
116-7115	[1]	SPRING
116-7116	[1]	RETAINER
116-7117	[1]	BOLT
116-7118	[1]	LEVER
116-7119	[1]	CLIP
116-7120	[1]	SHAFT
116-7121	[1]	HOOK
116-7122	[1]	BOLT
116-7123	[1]	WASHER
116-7124	[1]	SPRING
116-7125	[1]	LINK
116-7126	[1]	PLUG
116-7127	[1]	SEAL
116-7128	[1]	PISTON
116-7129	[1]	PISTON
116-7130	[2]	O-RING
116-7131	[2]	SEAL
116-7132	[1]	PLUG
116-7133	[1]	BOLT
116-7134	[3]	O-RING
116-7135	[2]	NUT
116-7945	[1]	BOLT
116-7947	[1]	SEAL
116-7948	[1]	CAP
116-7950	[1]	SPRING

		THE FOLLOWING REPAIR KITS ARE AVAILABLE

101-2986	[1]	KIT-GASKET
101-3897	[1]	KIT-SOLENOID

#SEBP19810051

4P-3026: SEPARATOR GP-WATER

SEPARATOR GP-WATER

4P3026 SEPARATOR GP-WATER

c617126 SEBP1981

For full view, you need register

Parts for your 426B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4H-2494	[2]	SLEEVE-FITTING
2.	1P-4278	[2]	CLAMP-HOSE
3.	5P-6442 E		HOSE (62CM)
4.	131-3959	[2]	TUBE AS
5.	130-7092	[1]	FILTER GP-WATER SEP & FUEL
	118-8118	[1]	RING-RETAINING
	118-8119	[1]	NUT
	131-1812	[1]	FILTER ELEMENT-FUEL (WATER SEPARATOR)
6.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
7.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
8.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
9.	131-3982	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
10.	032-8100	[2]	WASHER (0.531X0.718X0.064-IN THK)
11.	033-7849	[2]	PLUG
12.	7X-7729	[2]	WASHER (11X25X3-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP19810052

6I-0916: LINES GP-FUEL FILTER

LINES GP-FUEL FILTER

6I0916 LINES GP-FUEL FILTER

c585886 SEBP1981

For full view, you need register

Parts for your 426B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	032-8193	[4]	FERRULE
2.	6I-0260	[1]	BOLT
3.	6I-0630	[1]	BRACKET
4.	6I-0631	[1]	BOLT
5.	6I-0817	[2]	ADAPTER
6.	6I-0917	[1]	BOLT
7.	6I-0918	[1]	NUT
8.	6I-2608	[1]	SPACER
9.	9Y-9381	[2]	WASHER-HARD
10.	101-3909	[1]	NUT
11.	032-8100	[1]	WASHER
12.	032-8181	[4]	NUT
13.	033-7849	[1]	PLUG
14.	105-2422	[1]	TUBE
15.	067-6300	[2]	DAMPER
16.	067-6301	[2]	PLATE
17.	067-6998	[2]	NUT
18.	067-6999	[2]	FERRULE
19.	101-3901	[1]	LINE AS-FUEL FILTER
20.	4H-2494	[2]	SLEEVE-FITTING
21.	6I-0628	[1]	CLIP
22.	6I-0629	[1]	CLIP
23.	067-7001	[2]	NUT
24.	105-2424	[1]	TUBE AS
25.	6I-0629	[1]	CLIP
26.	105-2425	[1]	CLIP
27.	101-3903	[1]	TUBE AS
28.	4H-2494	[1]	SLEEVE-FITTING
29.	067-7001	[1]	NUT
30.	101-3904	[1]	TUBE
31.	105-2423	[1]	CONNECTOR
32.	101-3906	[1]	BOLT
33.	101-3907	[2]	WASHER
34.	101-3908	[1]	BOLT

#SEBP19810053

6I-1213: LINES GP-FUEL INJECTION

LINES GP-FUEL INJECTION

6I1213 LINES GP-FUEL INJECTION

c617214 SEBP1981

For full view, you need register

Parts for your 426B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-9255	[4]	CLAMP
2.	7W-0186	[4]	SPACER
3.	7W-0187	[4]	SEAL
4.	033-7873	[4]	WASHER-SEATING
5.	067-6312	[3]	BOLT
6.	067-6980	[1]	BOLT
7.	067-7011	[8]	WASHER
8.	101-3888	[1]	LINE AS (NO 1 CYLINDER)
9.	101-3889	[1]	LINE AS (NO 2 CYLINDER)
10.	101-3890	[1]	LINE AS (NO 3 CYLINDER)
11.	101-3891	[1]	LINE AS (NO 4 CYLINDER)
12.	101-3892	[2]	CLIP
13.	101-3893	[1]	CLIP
14.	6I-1214	[4]	ATOMIZER AS-FUEL
			(EACH INCLUDES)
15.	105-2002	[1]	NOZZLE
16.	105-2003	[1]	HOLDER
17.	101-3895	[8]	BOLT
18.	101-3896	[1]	LINE-DRAIN

#SEBP19810054

101-3376: FILTER GP-FUEL

FILTER GP-FUEL

101-3376 FILTER GP-FUEL

c538725 SEBP1981

For full view, you need register

Parts for your 426B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-0592	[1]	BRACKET
2.	6I-0593	[2]	BOLT
3.	6I-0594	[2]	NUT
4.	100-4830	[2]	BOLT
5.	101-3738	[1]	FILTER AS
6.	100-5593	[1]	ELEMENT
7.	101-3739	[1]	NUT
8.	101-3740	[1]	CAP
9.	101-3741	[1]	SEAL
10.	101-3742	[1]	PLUG
11.	101-3743	[1]	SEAL
12.	101-3744	[1]	RING

#SEBP19810055

9R-7590: BATTERY & WIRING GP

BATTERY & WIRING GP

9R7590 BATTERY & WIRING GP-PART 1 OF 3
TYPE 1 S/N 5YJ1-UP

c557022 SEBP1981

For full view, you need register

Parts for your 426B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-8623	[1]	HARNESS AS
2.	3S-2093	[25]	STRAP-CABLE
3.	9R-8624	[1]	HARNESS AS
4.	8T-4137 M	[3]	BOLT
5.	9M-8406	[1]	CLIP
6.	8T-4121	[3]	WASHER
7.	7T-0635	[1]	HORN AS
	6V-5210 M	[2]	SCREW-MACHINE
	9B-7233	[2]	LOCKWASHER
8.	6V-9505 M	[2]	SCREW-MACHINE
9.	6T-5925	[1]	SWITCH AS
	6V-8376	[3]	SCREW-MACHINE
	9B-7233	[3]	LOCKWASHER
10.	5H-6555	[2]	LOCKWASHER-TOOTH
11.	4P-7581	[1]	CLIP
12.	9R-4834	[1]	PLATE
13.	9R-9802	[1]	HOLDER AS
14.	8T-4195 M	[1]	BOLT
15.	8T-4244 M	[1]	NUT
16.	8T-4223	[1]	WASHER-HARD
17.	3T-5760	[1]	BATTERY (12 VOLT)
18.	8Y-8075	[1]	CABLE AS
	5P-0747		CABLE (00 GA) (32CM)
	7N-5274	[1]	COVER
	9R-4286	[1]	TERMINAL
	3S-6050	[1]	TERMINAL AS
	1M-6119	[1]	BOLT
	1M-6120	[1]	NUT
19.	033-8248	[2]	CLIP
20.	8Y-8074	[1]	CABLE AS
	1S-7252	[1]	TERMINAL
	5P-0761		CABLE (00 GA) (102CM)
	8N-0869	[1]	COVER
	8N-1725	[1]	COVER
21.	9R-8621	[1]	HARNESS AS-ENGINE
22.	4B-2049	[1]	NUT
23.	8F-1434	[1]	LOCKWASHER
24.	9R-7814	[1]	COVER
25.	9R-1780	[1]	CLIP AS
26.	9R-8843	[1]	HARNESS AS-FRAME
27.	8T-4224	[1]	WASHER-HARD
28.	8T-4200 M	[1]	BOLT
	M		METRIC PART

#SEBP19810056

9R-7590: BATTERY & WIRING GP

BATTERY & WIRING GP

9R7590 BATTERY & WIRING GP-PART 2 OF 3
TYPE 1 S/N 5YJ1-UP
3E7341-PAGE 61

c557024 SEBP1981

For full view, you need register

Parts for your 426B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8M-6176	[10]	LAMP-MINIATURE
2.	8J-1256	[2]	CLIP
3.	3E-7341 Y	[1]	SWITCH GP-START
4.	4B-4274	[2]	WASHER
5.	8C-4110	[1]	RESISTOR
6.	8T-4754 M	[1]	SCREW
7.	1H-4393	[1]	LOCKWASHER
8.	5C-8312 M	[1]	NUT
9.	8L-9801	[2]	LAMP
10.	3S-2093	[13]	STRAP-CABLE
11.	3E-7272	[1]	SWITCH AS
	6T-3631	[2]	NUT-HEX
	6T-3632	[1]	LOCKWASHER
12.	8T-6693 M	[4]	SCREW-MACHINE
13.	9F-8125	[4]	LOCKWASHER
14.	5C-2874 M	[4]	NUT
15.	7T-4848	[1]	FLASHER-ELECTRIC
16.	8T-4127 M	[1]	SCREW-MACHINE
17.	9X-9589	[1]	SWITCH AS
	9X-9590	[1]	LEVER
	2H-3920	[1]	LOCKWASHER
	3E-3382	[1]	RECEPTACLE AS
	3E-3383	[1]	WEDGE-RECEP LOCK
	6V-8369	[2]	NUT
	8T-8729	[6]	PIN-CONNECTOR
18.	9D-2868	[1]	LENS-RED
19.	9D-8047	[1]	BASE AS
20.	8Y-8606	[1]	GROMMET
21.	5C-7261 M	[1]	NUT
22.	8T-4224	[3]	WASHER-HARD
23.	6T-5925	[2]	SWITCH AS
			(EACH INCLUDES)
	6V-8376	[3]	SCREW-MACHINE
	9B-7233	[3]	LOCKWASHER
24.	6V-9505 M	[4]	SCREW-MACHINE
25.	5H-6555	[4]	LOCKWASHER-TOOTH
26.	9R-4834	[2]	PLATE
27.	3E-6330	[1]	ALARM GP
	102-8802	[1]	KIT-RECEPTACLE
	3E-3365	[1]	WEDGE
	8T-8729	[2]	PIN-CONNECTOR
28.	8T-8799	[1]	BOOT
29.	9R-9115	[1]	CAM AS
	6V-8236	[1]	PIN-SPRING
	096-8055	[2]	PIN-SPRING
30.	8T-3647 M	[2]	BOLT
31.	8T-7547 M	[1]	BOLT
32.	9R-9116	[1]	BRACKET
33.	6T-3633	[1]	RING-LOCKING
34.	3E-7273	[1]	SWITCH AS
	6T-3631	[2]	NUT-HEX
	6T-3632	[1]	LOCKWASHER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP19810057

9R-7590: BATTERY & WIRING GP

BATTERY & WIRING GP

9R7590 BATTERY & WIRING GP-PART 3 OF 3
TYPE 1 5YJ1-UP

c557026 SEBP1981

For full view, you need register

Parts for your 426B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[10]	STRAP-CABLE
2.	9R-9536	[1]	HARNESS AS
3.	8T-4138 M	[2]	BOLT
4.	8T-4205	[2]	WASHER-HARD
5.	101-0419	[1]	BRACKET AS
6.	101-0811	[1]	SWITCH AS-ROLLER
	2H-3922	[1]	LOCKWASHER
	6V-8363	[2]	SCREW
	6V-8370	[1]	NUT-HEX
	8F-1434	[2]	LOCKWASHER
	9X-0199	[1]	BOOT-SWITCH
	M		METRIC PART

#SEBP19810058

9R-7590: BATTERY & WIRING GP

BATTERY & WIRING GP

9R7590 BATTERY & WIRING GP-PART 1 OF 3
TYPE 2 S/N 5YJ1-UP

c579601 SEBP1981

For full view, you need register

Parts for your 426B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-4116	[1]	WASHER
2.	3S-2093	[27]	STRAP-CABLE
3.	8T-4200 M	[1]	BOLT
4.	8T-4137 M	[4]	BOLT
5.	9R-8843	[1]	HARNESS AS-FRAME
6.	4B-2049	[1]	NUT
7.	8F-1434	[1]	LOCKWASHER
8.	8T-4121	[3]	WASHER
9.	3T-5760	[1]	BATTERY-MAINTENANCE FREE
10.	9R-9802	[1]	HOLDER AS
11.	8T-4195 M	[1]	BOLT
12.	8Y-8074	[1]	CABLE AS
	1S-7252	[1]	TERMINAL
	5P-0761		CABLE (102CM)
	8N-0869	[1]	COVER
	8N-1725	[1]	COVER
13.	8T-4223	[1]	WASHER-HARD
14.	8T-4244 M	[1]	NUT
15.	9R-1780	[1]	CLIP AS
16.	9R-7814	[1]	COVER
17.	105-8034	[1]	SWITCH AS-LIMIT
18.	4P-7581	[4]	CLIP
19.	4P-7581	[1]	CLIP
20.	7T-0635	[1]	HORN AS
	6V-5210 M	[2]	SCREW-MACHINE
	9B-7233	[2]	LOCKWASHER
21.	106-1691	[1]	HARNESS AS
22.	106-1689	[1]	HARNESS AS
23.	106-2003	[1]	HARNESS AS-ENGINE
24.	7P-6682	[1]	CABLE AS
	1S-7251	[2]	TERMINAL
	5P-0747		CABLE (40CM)
25.	106-1692	[1]	CABLE AS
	1S-7251	[1]	TERMINAL
	5P-0747		CABLE (47CM)
	7N-5274	[1]	COVER
	M		METRIC PART

#SEBP19810059

9R-7590: BATTERY & WIRING GP

BATTERY & WIRING GP

9R7590 BATTERY & WIRING GP-PART 2 OF 3
TYPE 2 S/N 5YJ1-UP
3E7341-PAGE 61

c579603 SEBP1981

For full view, you need register

Parts for your 426B BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[13]	STRAP-CABLE
2.	8T-8799	[1]	BOOT
3.	7T-4848	[1]	FLASHER-ELECTRIC
4.	8T-3998 M	[1]	BOLT
5.	4B-4274	[2]	WASHER
6.	6V-4369	[2]	CLIP
7.	9W-1446	[2]	FUSE (20 AMP)
8.	8T-4121 M	[1]	WASHER
9.	8T-4191	[1]	BOLT
10.	5C-7261 M	[1]	NUT
11.	8T-4224	[3]	WASHER-HARD
12.	9W-1441	[2]	FUSE (15 AMP)
13.	9W-1442	[8]	FUSE (10 AMP)
14.	8M-6176	[11]	LAMP-MINIATURE
15.	9X-9589	[1]	SWITCH AS
	9X-9590	[1]	LEVER
	2H-3920	[1]	LOCKWASHER
	3E-3382	[1]	RECEPTACLE AS
	3E-3383	[1]	WEDGE-RECEP LOCK
	6V-8369	[2]	NUT
	8T-8729	[6]	PIN-CONNECTOR
16.	8Y-8606	[1]	GROMMET
17.	105-8034 C	[2]	SWITCH AS-LIMIT
18.	3E-7268 C	[2]	SWITCH AS-TOGGLE
			(EACH SWITCH
			INCLUDES)
	6T-3631	[2]	NUT-HEX
	6T-3632	[1]	LOCKWASHER
19.	6T-3633 C	[2]	RING-LOCKING
20.	8C-4110	[1]	RESISTOR
21.	8T-4754 M	[1]	SCREW
22.	1H-4393	[2]	LOCKWASHER
23.	5C-8312 M	[1]	NUT
24.	3E-6330	[1]	ALARM GP
	102-8802	[1]	KIT-RECEPTACLE
	3E-3365	[1]	WEDGE
	8T-8729	[2]	PIN-CONNECTOR
25.	3E-7341 Y	[1]	SWITCH GP-START
26.	9R-9116	[1]	BRACKET
27.	8L-9801	[3]	LAMP
28.	3E-7273	[1]	SWITCH AS
	6T-3631	[2]	NUT-HEX
	6T-3632	[1]	LOCKWASHER
29.	9R-9115	[1]	CAM AS
	6V-8236	[1]	PIN-SPRING
	096-8055	[2]	PIN-SPRING
30.	8T-7547 M	[1]	BOLT
31.	8T-6693 M	[4]	SCREW-MACHINE
32.	9F-8125	[4]	LOCKWASHER
33.	5C-2874 M	[4]	NUT
34.	3E-7272	[1]	SWITCH AS
	6T-3631	[2]	NUT-HEX
	6T-3632	[1]	LOCKWASHER
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

FUEL SYSTEM

PUMP GP-FUEL INJECTION

Truck Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01

Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Special Instruction

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Specifications

Fuel Injection Pump
3054 Engine

Fuel Injection Nozzles
3054 Engine

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

Reuse And Salvage Guidelines

Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Testing and Adjusting

Fuel Injection Nozzle - Test
3054 Engine

Disassembly and Assembly

Fuel Injection Pump
3054 ENGINE FOR416B, 426B, 428B, 436B AND 438B BACKHOE LOADE

Fuel Injection Pump Gear
3054 ENGINE FOR416B, 426B, 428B, 436B AND 438B BACKHOE LOADE

Fuel Injection Nozzles - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines

Fuel Injection Nozzles - Remove
3054 Engine for Caterpillar Built Machines

Fuel Injection Nozzles - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines

Fuel Injection Nozzles - Install
3054 Engine for Caterpillar Built Machines

Fuel Injection Pump - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines

Fuel Injection Pump - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines

Fuel Injection Pump - Remove - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines

Fuel Injection Pump - Install - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines

Service Magazine

Injection Pump Kits (Gasket/Solenoid) Available From Parts Service {1250,1251}
1993/05/17

B-Series Backhoe Loader Fuel Injection Pump And Injector Specifications{1251,1290}
1993/11/29

O-Ring Seal In Fuel Injection Pump Group Is A Serviceable Part{1251}
1994/04/18

3054 And 3056 Machine Engine Fuel Injection Pump Service{1251}
1994/11/21

Fuel Injection Pump Change{1251}
1995/01/16

Fuel System Component Information{1254}
1996/01/22

Proper Procedure For Servicing And Cleaning The Fuel Injection Pump{1251}
1996/10/21

Improved Fuel Lift Pump For 3054 Engines {1250,1256,1258}
1998/06/08

Use 136-3113 Timing Gauge To Time Engines With Bosch Pump {1251}
1998/08/17

Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/09

Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/03/08

Remanufactured Stanadyne Fuel Injection Pumps are now available for 3054 and 3056 Engines {1251}
2000/10/02

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Support for Fuel Injection Pumps {1251}
2008/07/14

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 426B :

6I-2477 PUMP GP-FUEL INJECTION

6I-2476 PUMP GP-FUEL INJECTION

6I-0570 PUMP GP-FUEL TRANSFER

101-0327 TANK GP-FUEL

9R-7584 CONTROL GP-GOV & ACCELERATOR

4P-3026 SEPARATOR GP-WATER

6I-0916 LINES GP-FUEL FILTER

6I-1213 LINES GP-FUEL INJECTION

101-3376 FILTER GP-FUEL

9R-7590 BATTERY & WIRING GP

Truck sale:

USD $19,500

1996 CAT 426B

Rowden & Sons
Farmington, Georgia

1996 CAT 426B

HUNYADY AUCTION CO
Doublassville, Pennsylvania

USD $24,500

1992 CAT 426B

Campbell Tractor Co
NAMPA, Idaho

CAT 426B

BLOUNT PARTS & EQUIPMENT