ELECTRICAL AND STARTING SYSTEM
WIRING GPSTARTING MOTOR GP
STARTING AID GP
BASIC ENGINE
PULLEY GPPOWER TRAIN
DRIVE GPELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP19810100
9R-5374: WIRING GP-HYD CONTROL VALVE
9R5374 WIRING GP
TYPE 2 S/N 5YJ1-UP, 6KL1-UP {(LOADER CONTROL VALVE-COSA)}
PART OF 9R7212 LOCK AR-COSA HYDRAULIC
AN ATTACHMENT
TYPE 2 S/N 5YJ1-UP, 6KL1-UP {(LOADER CONTROL VALVE-COSA)}
PART OF 9R7212 LOCK AR-COSA HYDRAULIC
AN ATTACHMENT
Parts for your 426B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 130-2759 C | [1] | HOUSING-DETENT | |
| 2. | 130-2758 C | [1] | HOUSING-SWITCH | |
| 3. | 131-0379 C | [1] | SWITCH AS | |
| 102-8803 | [1] | KIT-RECEPTACLE | ||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK | ||
| 5P-5677 BD | WIRE (18 GA) | |||
| 8T-8729 | [3] | PIN-CONNECTOR | ||
| 4. | 3S-2093 C | [1] | STRAP-CABLE (1.75IN DIA) | |
| 5. | 3S-2093 B | [14] | STRAP-CABLE (1.75IN DIA) | |
| 6. | 131-0290 C | [1] | HARNESS AS | |
| 7. | 109-7459 C | [1] | HARNESS AS | |
| 8. | 3E-9362 | [1] | RELAY AS | |
| 9. | 8T-3998 M | [1] | BOLT (M4X0.7X12MM) | |
| 10. | 1H-4393 | [1] | LOCKWASHER (NO.8) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP19810101
7E-7711: STARTING MOTOR GP-ELECTRIC
7E7711 STARTING MOTOR GP-ELECTRIC-12 VOLT
3E7905-PAGE 81
3E7905-PAGE 81
Parts for your 426B BACKHOE LOADER:
CATERPILLAR SIS#SEBP19810102
3E-7905: STARTING MOTOR GP-ELECTRIC
3E7905 STARTING MOTOR GP-ELECTRIC
PART OF 7E7711 STARTING MOTOR
PART OF 7E7711 STARTING MOTOR
Parts for your 426B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4133 M | [2] | NUT | |
| 2. | 8T-4121 | [2] | WASHER | |
| 3. | 3E-5153 | [1] | COVER-STARTER | |
| 4. | 9X-2036 M | [1] | SCREW-PAN HEAD | |
| 5. | 8F-1434 | [1] | LOCKWASHER | |
| 6. | 8C-9778 | [1] | PLUNGER AS | |
| 7. | 8C-9783 | [1] | GASKET | |
| 8. | 6T-8953 | [1] | BEARING AS | |
| 9. | 7T-6092 | [1] | HOLDER AS-BRUSH | |
| 10. | 100-4118 | [1] | CASE AS-STARTER | |
| 11. | 7T-6088 | [1] | BEARING AS | |
| 12. | 7T-6087 | [1] | WASHER | |
| 13. | 7T-6093 | [1] | CLUTCH AS | |
| 14. | 8J-4455 | [1] | BALL | |
| 15. | 7T-6090 | [1] | SPRING | |
| 16. | 100-4119 | [1] | ARMATURE AS | |
| 17. | 100-4116 | [1] | FRAME-STARTER | |
| 18. | 100-4115 | [1] | HOUSING-STARTER | |
| 19. | 100-4114 | [1] | SWITCH AS | |
| 20. | 3E-5154 | [1] | BUSHING-STARTER | |
| 21. | 100-3685 | [1] | CAP-STARTER | |
| THE FOLLOWING REPAIR | ||||
| KITS ARE AVAILABLE: | ||||
| 7T-6099 | [1] | KIT-GEAR | ||
| (INCLUDES: RETAINER, | ||||
| PINION & ROLLER) | ||||
| 7T-6100 | [1] | KIT-HARDWARE | ||
| (INCLUDES: PLATE, | ||||
| SCREW AS & BOLT AS) | ||||
| 100-4112 | [1] | KIT-CONTACT | ||
| (INCLUDES: NUT, WASHER, | ||||
| PLATE, BUSHINGS & BOLT) | ||||
| 8C-5457 | [1] | KIT-CONTACT | ||
| (INCLUDES: PLATE, | ||||
| BUSHINGS, BOLT, NUT, | ||||
| WASHER & SEAL) | ||||
| M | METRIC PART | |||
#SEBP19810103
6I-1149: HEATER GP-AIR INLET
6I1149 STARTING AID GP
Parts for your 426B BACKHOE LOADER:
CATERPILLAR SIS#SEBP19810104
9X-0341: ALTERNATOR GP-CHARGING
9X0341 ALTERNATOR GP
PART OF 9R8009 AIR CONDITIONER AR, 7E7712 ALTERNATOR & 9R8041 LIGHTING
AN ATTACHMENT
PART OF 9R8009 AIR CONDITIONER AR, 7E7712 ALTERNATOR & 9R8041 LIGHTING
AN ATTACHMENT
#SEBP19810105
7E-7712: ALTERNATOR GP-CHARGING
7E7712 ALTERNATOR GP
AN ATTACHMENT
AN ATTACHMENT
Parts for your 426B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9X-0341 Y | ALTERNATOR GP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP19810106
105-2813: ALTERNATOR GP-CHARGING
1052813 ALTERNATOR GP-CHARGING
12 VOLT, 90 AMP
PART OF 9R8009 AIR CONDITIONER AR & 9R8041 LIGHTING-FRONT & REAR WORK
AN ATTACHMENT
12 VOLT, 90 AMP
PART OF 9R8009 AIR CONDITIONER AR & 9R8041 LIGHTING-FRONT & REAR WORK
AN ATTACHMENT
Parts for your 426B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 113-4457 | [1] | PULLEY-ALTERNATOR | |
| 2. | 113-4459 | [1] | FRAME AS-ALTERNATOR | |
| 3. | 113-4460 | [1] | ROTOR AS-ALTERNATOR | |
| 4. | 113-4461 | [1] | FRAME AS-ALTERNATOR | |
| 5. | 113-4462 | [1] | REGULATOR AS-ALTERNATOR | |
| 6. | 113-4463 | [1] | RECTIFIER AS-ALTERNATOR | |
| 7. | 113-4464 | [1] | COVER-ALTERNATOR | |
| 8. | 113-4469 | [4] | BUSHING-ALTERNATOR | |
| 9. | 113-4470 | [1] | BUSHING-ALTERNATOR | |
| 10. | 5C-2890 M | [1] | NUT | |
| 11. | 8T-4205 | [1] | WASHER-HARD | |
| 12. | 1H-3244 | [1] | LOCKWASHER | |
| (THE FOLLOWING REPAIR KITS ARE AVAILABLE) | ||||
| 113-4465 | [1] | KIT-ALTERNATOR BEARING | ||
| 113-4466 | [1] | KIT-ALTERNATOR BRUSH | ||
| 113-4467 | [1] | KIT-ALTERNATOR TERMINAL | ||
| 113-4468 | [1] | KIT-ALTERNATOR HARDWARE | ||
| M | METRIC PART | |||
#SEBP19810107
4P-3711: MOUNTING GP-ALTERNATOR
4P3711 ALTERNATOR GP
3E7295-PAGE 85
3E7295-PAGE 85
Parts for your 426B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-3713 | [1] | STRAP | |
| 2. | 8T-3647 M | [1] | BOLT | |
| 3. | 8T-4224 | [2] | WASHER-HARD | |
| 4. | 7X-0818 M | [1] | BOLT | |
| 5. | 4P-4854 | [1] | BRACKET AS | |
| 6. | 101-7399 M | [1] | BOLT-HEX SOCKET | |
| 101-7399 CM | [1] | BOLT-HEX SOCKET | ||
| 7. | 8T-4121 C | [2] | WASHER | |
| 8. | 8T-0389 M | [1] | NUT | |
| 9. | 4K-5824 | [2] | BOSS | |
| 10. | 5P-1075 C | [2] | WASHER-HARD | |
| 11. | 5P-4116 | [1] | WASHER | |
| 12. | 8T-4908 M | [1] | BOLT | |
| 13. | 7C-9465 | [1] | SPACER | |
| 14. | 8T-4136 M | [2] | BOLT | |
| 15. | 4N-0205 M | [1] | SPACER | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP19810108
3E-7295: ALTERNATOR GP-CHARGING
3E7295 ALTERNATOR GP
PART OF 4P3711 ALTERNATOR
PART OF 4P3711 ALTERNATOR
Parts for your 426B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5C-2874 M | [2] | NUT | |
| 2. | 8T-0328 | [2] | WASHER-HARD | |
| 3. | 8F-1434 | [3] | LOCKWASHER | |
| 4. | 5C-7261 M | [1] | NUT | |
| 5. | 8T-4224 | [1] | WASHER-HARD | |
| 6. | 109-7039 | [1] | FRAME AS-ALTERNATOR | |
| 7. | 9W-1794 | [1] | COVER | |
| 8. | 109-7040 | [1] | ROTOR AS-ALTERNATOR | |
| 9. | 109-7044 | [1] | COVER-ALTERNATOR | |
| 10. | 109-7042 | [1] | FRAME AS-ALTERNATOR | |
| 11. | 105-2062 | [1] | REGULATOR AS-ALTERNATOR | |
| 12. | 109-7043 | [1] | STATOR AS-ALTERNATOR | |
| 13. | 9W-1900 | [1] | CAPACITOR | |
| 14. | 109-7045 | [1] | FAN-ALTERNATOR | |
| 15. | 109-7047 | [1] | RECTIFIER AS-ALTERNATOR | |
| 16. | 109-7048 | [1] | SPACER | |
| 17. | 2P-8099 | [1] | BALL BEARING | |
| 18. | 4M-2697 | [1] | BALL BEARING | |
| 19. | 9W-1901 M | [3] | SCREW | |
| 20. | 9W-1902 M | [1] | SCREW | |
| 21. | 6V-5210 M | [2] | SCREW-MACHINE | |
| 22. | 096-6166 | [4] | WASHER-HARD | |
| 23. | 6V-9673 M | [1] | SCREW-MACHINE | |
| 24. | 6V-9492 M | [2] | SCREW-MACHINE | |
| THE FOLLOWING REPAIR | ||||
| KITS ARE AVAILABLE: | ||||
| 9W-1912 | [1] | KIT-HARDWARE | ||
| 109-7046 | [1] | KIT-ALTERNATOR TERMINAL | ||
| M | METRIC PART | |||
#SEBP19810109
9R-9309: DRIVE AR-ALL WHEEL
9R9309 DRIVE AR-AWD (COSA)
AN ATTACHMENT
AN ATTACHMENT
Parts for your 426B BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9R-7540 Y | [1] | AXLE GP-DRIVE | ||
| 9R-8036 Y | [1] | AXLE GP-DRIVE & STEER | ||
| 9R-1231 Y | [1] | DRIVE SHAFT GP | ||
| 9R-7585 Y | [1] | FRAME GP-LOADER | ||
| 9R-7609 Y | [1] | LINES GP-STEERING | ||
| 8E-7681 Y | [1] | TRANSMISSION GP-DIRECT DRIVE | ||
| 9R-1287 Y | [1] | WHEEL & TIRE GP-FRONT | ||
| 9R-0720 Y | [1] | WHEEL & TIRE GP-REAR | ||
| 9R-8005 Y | [1] | WIRING GP-FRONT DRIVE | ||
| 9R-9996 | [1] | BAFFLE | ||
| 3E-8134 | [2] | FILM-4X4 | ||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Special Instruction
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Troubleshooting
Service Magazine
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
2000/04/10
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}


