AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3508 LOCOMOTIVE ENGINE 6TJ00001-UP BASIC ENGINE Caterpillar SIS



LOCOMOTIVE ENGINE 3508 LOCOMOTIVE ENGINE 6TJ
 3508 LOCOMOTIVE ENGINE 6TJ00001-UP SEBP1988 3508 6TJ   (1991)

Parts group 3508:

  For full view, you need register
BASIC ENGINE
BALANCER GP
BALANCER GP
7N-8711 BALANCER GP
7N-8711 BALANCER GP -FRONT
S/N 6TJ1-99999
CAMSHAFT GP
CAMSHAFT GP
7W-1256 CAMSHAFT GP
7W-1256 CAMSHAFT GP
S/N 6TJ1-99999
COUPLING GP
COUPLING GP-AUXILIARY DRIVE
9Y-7612 COUPLING GP-AUXILIARY DRIVE
9Y-7612 COUPLING GP-AUXILIARY DRIVE
FOR USE WITH 2-SIDED FRONT HOUSING
AN ATTACHMENT
COUPLING GP-FLEXIBLE
7E-0469 COUPLING GP-FLEXIBLE
7E-0469 COUPLING GP-FLEXIBLE
AN ATTACHMENT
COUPLING GP-FLEXIBLE
9Y-7201 COUPLING GP-FLEXIBLE
9Y-7201 COUPLING GP-FLEXIBLE
AN ATTACHMENT
GUARD GP-COUPLING
4P-3662 GUARD GP-COUPLING
4P-3662 GUARD GP-COUPLING
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
7N-8707 CRANKSHAFT GP
7N-8707 CRANKSHAFT GP
S/N 6TJ1-13
CRANKSHAFT GP
7N-8707 CRANKSHAFT GP
7N-8707 CRANKSHAFT GP
S/N 6TJ14-99999
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
S/N 6TJ1-99999
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
7N-8633 COVER GP-CYLINDER BLOCK
7N-8633 COVER GP-CYLINDER BLOCK
S/N 6TJ1-99999
CYLINDER BLOCK AS
101-1171 CYLINDER BLOCK AS
101-1171 CYLINDER BLOCK AS
S/N 6TJ14-99999
PART OF 115-3501 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@115-3503@@@@@
CYLINDER BLOCK AS
106-2778 CYLINDER BLOCK AS
106-2778 CYLINDER BLOCK AS
S/N 6TJ14-UP
PART OF 115-3503 CYLINDER BLOCK GP
CYLINDER BLOCK AS
7E-4659 CYLINDER BLOCK AS
7E-4659 CYLINDER BLOCK AS
PART OF 4P-7262 CYLINDER BLOCK GP
CYLINDER BLOCK AS
7E-4939 CYLINDER BLOCK AS
7E-4939 CYLINDER BLOCK AS
S/N 6TJ1-13
PART OF 2W-8240 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 4P-7262@@@@@
CYLINDER BLOCK GP
115-3501 CYLINDER BLOCK GP
115-3501 CYLINDER BLOCK GP
S/N 6TJ14-99999
CYLINDER BLOCK GP
115-3503 CYLINDER BLOCK GP
115-3503 CYLINDER BLOCK GP
S/N 6TJ14-UP
FIELD REPLACEMENT FOR 101-1171 CYLINDER BLOCK AS
CYLINDER BLOCK GP
2W-8240 CYLINDER BLOCK GP
2W-8240 CYLINDER BLOCK GP
S/N 6TJ1-13
CYLINDER BLOCK GP
4P-7262 CYLINDER BLOCK GP
4P-7262 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 7E-4939@@@@@
LINER-CYLINDER BLOCK
123-8206 LINER-CYLINDER BLOCK
123-8206 LINER-CYLINDER BLOCK
FOR USE WITH CYLINDER BLOCKS WHEN A WEAR STEP EXISTS AND REDECKING IS NOT AN OPTION
FIELD INSTALLATION
CYLINDER HEAD GP
CYLINDER HEAD AS
172-0838 CYLINDER HEAD AS
172-0838 CYLINDER HEAD AS
S/N 6TJ14-UP
CYLINDER HEAD AS
242-5326 CYLINDER HEAD AS
242-5326 CYLINDER HEAD AS
S/N 6TJ14-UP
FIELD REPLACEMENT FOR @@@@@172-0836@@@@@
CYLINDER HEAD AS
7E-5858 CYLINDER HEAD AS
7E-5858 CYLINDER HEAD AS
S/N 6TJ1-13
FIELD REPLACEMENT FOR @@@@@ 7E-5860@@@@@
CYLINDER HEAD AS
7E-5860 CYLINDER HEAD AS
7E-5860 CYLINDER HEAD AS
S/N 6TJ1-13
PART OF 7E-5858 CYLINDER HEAD AS, 4P-2471 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7E-5858@@@@@
CYLINDER HEAD GP
172-0836 CYLINDER HEAD GP
172-0836 CYLINDER HEAD GP
S/N 6TJ14-99999
PART OF 172-0838, 242-5326 CYLINDER HEAD AS, 203-2144 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@172-0838@@@@@, @@@@@242-5326@@@@@
CYLINDER HEAD GP
203-2144 CYLINDER HEAD GP
203-2144 CYLINDER HEAD GP
S/N 6TJ14-99999
PART OF 203-2170 CYLINDER HEAD GP
CYLINDER HEAD GP
203-2170 CYLINDER HEAD GP
203-2170 CYLINDER HEAD GP
S/N 6TJ14-99999
CYLINDER HEAD GP
4P-2470 CYLINDER HEAD GP
4P-2470 CYLINDER HEAD GP
S/N 6TJ1-13
CYLINDER HEAD GP
4P-2471 CYLINDER HEAD GP
4P-2471 CYLINDER HEAD GP
S/N 6TJ1-13
PART OF 4P-2470 CYLINDER HEAD GP
355-0769 KIT-CYLINDER HEAD GASKET
355-0769 KIT-CYLINDER HEAD GASKET
S/N 6TJ1-13
PROVIDE A STANDARDIZED 3500 SINGLE CYLINDER HEAD KIT FOR MUI APPLICATIONS WITH STANDARD EXHAUST 320-8974 GASKET, AND INTAKE AIR LINE GASKETS 7N-5089. THIS KIT DOES NOT CONTAIN INJECTOR SEALS, BREATHER SEALS, VALVE STEM SEALS, OR ROCKER ARM BUTTON SEALS. ORDER AS NEEDED
FOR USE WITH @@@@@ 4P-8270@@@@@, GS055- MACHINE S/N CAL1-UP, GS056- MACHINE S/N FDR1-UP, E258- ENGINE S/N 95Y1-UP, ENGINE ARRANGEMENTS: 143-5189, 4W-0280, 7N-8704, 8N-5810, E260- ENGINE S/N 97Y1-UP, E261- ENGINE S/N 49Y1-UP, ENGINE ARRANGEMENTS: 4W-0282, 8N-5805, E263- ENGINE S/N 51Y-UP, ENGINE ARRANGEMENTS: 2W-8863, 8N-5803, E264- ENGINE S/N 27Z1-UP, ENGINE ARRANGEMENTS: 8N-0461, 4W-0284, 135-4467, 135-4468, E265- ENGINE S/N 29Z1-UP, ENGINE ARRANGEMENTS: 2W-8864, 8N-0464, 8N-5813, E266- ENGINE S/N 28Z1-UP, ENGINE ARRANGEMENTS: 2W-8865, 8N-0465, E273- ENGINE S/N 23Z1-UP, ENGINE ARRANGEMENTS: 2W-8046, 7C-1299, 7C-4594, 7N-8701, E274- ENGINE S/N 24Z1-UP, ENGINE ARRANGEMENTS: 2W-8405, 7C-1300, 7C-5185, 8N-5806, E275- ENGINE S/N 25Z1-UP, ENGINE ARRANGEMENTS: 107-7346, 107-7350, 2W-8404, 4P-4444, 6I-2939, 7C-1301, 7C-5186, 8N-0462, 8N-0463, E301- ENGINE S/N 68Z1-UP, ENGINE ARRANGEMENTS: 1W-4210, 1W-4214, 4W-0281, E303- ENGINE S/N 70Z1-UP, ENGINE ARRANGEMENTS: 1W-4211, 2W-8867, E304- ENGINE S/N 65Z1-UP, ENGINE ARRANGEMENTS: 1W-4216, 4W-0283, E305- ENGINE S/N 71Z1-UP, E306- ENGINE S/N 67Z1-UP, E307- ENGINE S/N 71Z1-UP, E308- ENGINE S/N 72Z1-UP, ENGINE ARRANGEMENTS: 1W-4225, 1W-4227, 2W-8870, E309- ENGINE S/N 73Z1-UP, ENGINE ARRANGEMENTS: 1W-4223, 1W-4224, 2W-8871, E387- ENGINE S/N 2WK1-77, E390- ENGINE S/N 6TJ1-13, RM388- ENGINE S/N 99W1-UP, MACHINE S/N 6JC1-UP, RM389- ENGINE S/N 99W1-UP, MACHINE S/N 4YC1-UP, RM413- ENGINE S/N 96Z1-UP, MACHINE S/N 8GB1-UP, RM415- ENGINE S/N 54Z1-UP, MACHINE S/N 9ZC1-UP, T403- ENGINE S/N 99W1-UP, MACHINE S/N 74Z1-UP, T534- ENGINE S/N 54Z1-UP, MACHINE S/N 9YF1-UP
FIELD INSTALLATION
DAMPER GP
100-4324 DAMPER GP
100-4324 DAMPER GP
S/N 6TJ14-UP
PART OF 8N-0339 DAMPER GP
100-4325 DAMPER GP
100-4325 DAMPER GP
S/N 6TJ14-UP
DAMPER GP
146-3740 DAMPER GP
146-3740 DAMPER GP
S/N 6TJ14-99999
PART OF 8N-0339 DAMPER GP
DAMPER GP
171-4571 DAMPER GP
171-4571 DAMPER GP
FIELD INSTALLATION
DAMPER GP
6I-3697 DAMPER GP
6I-3697 DAMPER GP
S/N 6TJ14-UP
PART OF 100-4324 DAMPER GP
DAMPER GP
6I-3699 DAMPER GP
6I-3699 DAMPER GP
S/N 6TJ14-UP
PART OF 100-4325 DAMPER GP
FIELD REPLACEMENT ORDER @@@@@171-4571@@@@@
DAMPER GP
7C-9639 DAMPER GP
7C-9639 DAMPER GP
PART OF 100-4325 DAMPER GP
FIELD REPLACEMENT ORDER @@@@@171-4571@@@@@
FIELD INSTALLATION
DAMPER GP
7C-9641 DAMPER GP
7C-9641 DAMPER GP
PART OF 100-4324, 8N-0339 DAMPER GP
DAMPER GP
8N-0339 DAMPER GP
8N-0339 DAMPER GP
S/N 6TJ1-13
DAMPER GP
8N-0339 DAMPER GP
8N-0339 DAMPER GP
S/N 6TJ14-UP
DAMPER GP
8N-0339 DAMPER GP
8N-0339 DAMPER GP
S/N 6TJ14-99999
GUARD GP-DAMPER
8N-9639 GUARD GP-DAMPER
8N-9639 GUARD GP-DAMPER
FOR USE WITH FRONT ACCESSORY DRIVE HOUSING
AN ATTACHMENT
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
111-8144 DRIVE GP-ACCESSORY
111-8144 DRIVE GP-ACCESSORY -LOWER, LH
STANDARD ROTATION
AN ATTACHMENT
DRIVE GP-ACCESSORY
7N-4871 DRIVE GP-ACCESSORY
7N-4871 DRIVE GP-ACCESSORY -UPPER, RH
S/N 6TJ1-99999
FOR USE WITH 900-1800 RPM
CANNOT BE USED WITH RIGHT HAND GOVERNOR
DRIVE GP-ACCESSORY
8N-9167 DRIVE GP-ACCESSORY
8N-9167 DRIVE GP-ACCESSORY -LOWER, LH
STANDARD ROTATION
Type 1
AN ATTACHMENT
DRIVE GP-ACCESSORY
8N-9167 DRIVE GP-ACCESSORY
8N-9167 DRIVE GP-ACCESSORY -LOWER, LH
STANDARD ROTATION
Type 2
AN ATTACHMENT
DRIVE GP-AUXILIARY
COUPLING GP-AUXILIARY DRIVE
9Y-7612 COUPLING GP-AUXILIARY DRIVE
9Y-7612 COUPLING GP-AUXILIARY DRIVE
FOR USE WITH 2-SIDED FRONT HOUSING
AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GP
7N-4851 FLYWHEEL GP
7N-4851 FLYWHEEL GP
S/N 6TJ1-99999
GEAR GP-REAR
116-9854 GEAR GP-REAR
116-9854 GEAR GP-REAR
S/N 6TJ14-99999
GEAR GP-REAR
4W-5908 GEAR GP-REAR
4W-5908 GEAR GP-REAR
S/N 6TJ1-13
CAM DRIVE
GEAR GP
GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
S/N 6TJ1-13
GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
S/N 6TJ14-99999
GEAR GP-REAR
116-9854 GEAR GP-REAR
116-9854 GEAR GP-REAR
S/N 6TJ14-99999
GEAR GP-REAR
4W-5908 GEAR GP-REAR
4W-5908 GEAR GP-REAR
S/N 6TJ1-13
CAM DRIVE
HOUSING GP-FRONT
7W-3724 HOUSING GP-FRONT
7W-3724 HOUSING GP-FRONT -ACCESSORY DRIVE
S/N 6TJ1-99999
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
4W-1529 COVER GP-FLYWHEEL HOUSING
4W-1529 COVER GP-FLYWHEEL HOUSING
S/N 6TJ1-99999
HOUSING GP-FLYWHEEL
7W-3722 HOUSING GP-FLYWHEEL
7W-3722 HOUSING GP-FLYWHEEL
S/N 6TJ1-13
FOR USE WITH SAE 00 FLYWHEEL
HOUSING GP-FLYWHEEL
7W-3722 HOUSING GP-FLYWHEEL
7W-3722 HOUSING GP-FLYWHEEL
S/N 6TJ14-99999
FOR USE WITH SAE 00 FLYWHEEL
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
8N-9642 COVER GP-FRONT HOUSING
8N-9642 COVER GP-FRONT HOUSING
S/N 6TJ1-99999
GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
S/N 6TJ1-13
GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
S/N 6TJ14-99999
HOUSING GP-FRONT
7W-3724 HOUSING GP-FRONT
7W-3724 HOUSING GP-FRONT -ACCESSORY DRIVE
S/N 6TJ1-99999
LIFTING GP-ENGINE
LIFTING GP-ENGINE
140-9593 LIFTING GP-ENGINE
140-9593 LIFTING GP-ENGINE
S/N 6TJ14-99999
LIFTING GP-ENGINE
8N-7734 LIFTING GP-ENGINE
8N-7734 LIFTING GP-ENGINE
S/N 6TJ1-13
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
4P-0240 MOUNTING GP-ENGINE
4P-0240 MOUNTING GP-ENGINE
AN ATTACHMENT
PAN GP-OIL
COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
Type 1
AN ATTACHMENT
COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
Type 2
AN ATTACHMENT
PAN GP-OIL
4P-8271 PAN GP-OIL
4P-8271 PAN GP-OIL
S/N 6TJ1-13
PAN GP-OIL
4P-8282 PAN GP-OIL
4P-8282 PAN GP-OIL
S/N 6TJ1-13
PART OF 4P-8271 PAN GP-OIL
PAN GP-OIL
7C-7185 PAN GP-OIL
7C-7185 PAN GP-OIL -DEEP SUMP
S/N 6TJ14-99999
PAN GP-OIL
9Y-3083 PAN GP-OIL
9Y-3083 PAN GP-OIL -DEEP SUMP
S/N 6TJ14-UP
PART OF 7C-7185 PAN GP-OIL
PAN GP-OIL
9Y-3083 PAN GP-OIL
9Y-3083 PAN GP-OIL -DEEP SUMP
S/N 6TJ14-99999
PART OF 7C-7185 PAN GP-OIL
PISTON & ROD GP
PISTON & ROD GP
6I-2861 PISTON & ROD GP
6I-2861 PISTON & ROD GP
S/N 6TJ14-99999
PISTON & ROD GP
8N-6224 PISTON & ROD GP
8N-6224 PISTON & ROD GP
S/N 6TJ1-13
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
S/N 6TJ1-99999
VALVE MECHANISM GP
195-1926 VALVE MECHANISM GP
195-1926 VALVE MECHANISM GP
S/N 6TJ14-99999
VALVE MECHANISM GP
4W-1035 VALVE MECHANISM GP
4W-1035 VALVE MECHANISM GP
S/N 6TJ1-13
ENGINE OVERHAUL KIT
494-1221 KIT-ENGINE OVERHAUL
494-1221 KIT-ENGINE OVERHAUL
FIELD INSTALLATION
494-1279 KIT-ENGINE OVERHAUL
494-1279 KIT-ENGINE OVERHAUL
FIELD INSTALLATION

Information:

(For parts list, see above)

Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
The Connecting Rod On The Air Compressor Is Now Serviceable {1803}
2002/05/01
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Specifications
Balancer Group (Front)
3500 Locomotive Engines
Belt Tension Chart
3500 Locomotive Engines
Engine News
New 8T2998 Lubricant Available
1986/03/01
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/11/01
New Sleeve Bearing Used In Camshaft Idler Gear Assembly In Rear Gear Groups{1206}
1995/11/20
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
New Cover Seals are Available {1107, 1201, 1210}
2003/05/01
Quality of Remanufactured Camshafts {1210}
2003/07/01
Procedure for Installing the Camshaft Drive Gear {1212}
2005/12/12
Specifications
Camshaft
3500 Locomotive Engines
Systems Operation
Camshaft
3500 Locomotive Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500 Locomotive Engines
Camshaft Timing
3500 Locomotive Engines
Disassembly and Assembly
Rear Gear Group
3512 & 3516 Locomotive Engines
Camshafts
3512 & 3516 Locomotive Engines
Camshaft Bearings
3512 & 3516 Locomotive Engines
Service Magazine
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
1993/11/09
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Engine News
Improved Auxiliary Drive Coupling {3279}
2003/12/01
Reuse And Salvage Guidelines
Inspection of the Coupling Assembly for 3524 Engines {3279}
Inspection of the Coupling Assembly for 3524 Engines {3279}
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Service Life of Crankshaft Gears Can Be Extended
1993/07/01
Improved Crankshaft Seal Groups Used
1993/10/01
Remanufactured Crankshaft Interchangeability; Remanufactured "Upgrade To New" (UTN) Availability {1202}
1994/10/01
New Crankshaft Damper Assembly Used {1205}
1995/04/01
Numbering The Crankshaft To Match Counterweights{1202,1231}
1995/10/01
New Counterweight Bolt Assembly Replaces Bolt And Washer {1231}
1998/07/01
Change In Location And Size Of Crankshaft Counterweight Sequence Number{1231,1202}
1998/12/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Be Sure To Use The Correct Procedure To Remove The Rear Crankshaft Seal And Wear Sleeve{1161}
1999/09/01
Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/11
Important Notice on Installation of Crankshaft Seals and Wear Sleeves {1160, 1161}
2009/02/23
New Front and Rear Crankshaft Seals Are Now Used on Certain 3500 and G3500 Engines {1160, 1161}
2015/02/20
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Inspection of Crankshaft Main Bearings{1203}
Inspection of Crankshaft Main Bearings{1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Technical Information Bulletin
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Specifications
Crankshaft Wear Sleeves and Seals
3500 Locomotive Engines
Connecting Rod and Main Bearing Journals
3500 Locomotive Engines
Crankshaft
3500 Locomotive Engines
Systems Operation
Crankshaft
3500 Locomotive Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500 Locomotive Engines
Main Bearings
3500 Locomotive Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500 Locomotive Engines
Disassembly and Assembly
Crankshaft Vibration Damper
3512 & 3516 Locomotive Engines
Crankshaft Front Seal And Wear Sleeve
3512 & 3516 Locomotive Engines
Crankshaft Rear Seal And Wear Sleeve
3512 & 3516 Locomotive Engines
Crankshaft Main Bearings
3512 & 3516 Locomotive Engines
Crankshaft
3512 & 3516 Locomotive Engines
Service Magazine
6V3143 Distorter Adapter Available For Use With 5P7409 Wear Sleeve Distorter For Removal Of Crankshaft Wear Sleeves{0621,1202,1160,1161}
1980/09/08
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Service Life of Crankshaft Gears Can Be Extended{1204}
1993/07/26
New Crankshaft Seal Groups Prevent Oil Lip Damage {1160,1161}
1993/10/04
New Main Bearings Have Higher Fatigue Strength {1203,1200}
1993/10/04
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
New Copper Lead Main and Connecting Rod Bearings Are Available For All 3500 Diesel Machine Engines {1203, 1219}
2015/01/28
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Checking Or Adjusting Valve Clearances
1986/01/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Main Bearings Have Higher Fatigue Strength
1993/09/01
New O-ring Seal Used On Cylinder Block Covers
1993/10/01
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/11/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
New Cylinder Blocks Made From Stronger Alloy{1201}
1994/12/01
"Narrow Flange" Cylinder Liner Available For Service Repair {1216,1201}
1995/03/01
Improved Spacer Plate Provides Visual Indication Of Use Of "Wide Flange" Cylinder Liners {1221}
1995/05/01
New Liner Seat Inserts Allow Cylinder Blocks With Deeper Liner Seat Cracks To Be Salvaged{1201,1217}
1995/07/01
5P-8665 Liner Puller Group Changed To Accommodate Cylinder Liner With Larger Diameter Top Flange{1216}
1995/09/01
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
Improved Cylinder Liner Has Longer Service Life{1216}
1997/05/01
Recommended Lubrication And Torque Procedure For Main Bearing Cap Bolts {1203}
1998/09/01
New Spacer Plate Gasket Provides Improved Sealing {1221}
1998/09/01
New Spacer Plate Gasket Provides Improved Sealing{1221}
1998/10/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
New Cover Seals are Available {1107, 1201, 1210}
2003/05/01
New Cylinder Liner {1216}
2003/05/01
The Cylinder Block Has Changed {1201}
2003/10/01
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
2010/06/25
A New Top Liner Seal Is Used on 3500 Engines {1201, 7555}
2010/12/16
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
2011/07/29
A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
2013/08/21
An Improved Inspection Process for Cylinder Liners Used in All 3500 Engines {1201, 1216}
2014/06/20
Cat<SUP>&reg;</SUP> Reman Has Added New Cylinder Block Groups for Certain 3500 and G3500 Commercial Engines {1000, 1201}
2014/10/31
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Engines {0705, 1201, 1217}
2014/12/05
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Ordering &quot;Series B&quot; Replacement Cylinder Blocks for 3500 Series Engines{1201}
Ordering "Series B" Replacement Cylinder Blocks for 3500 Series Engines{1201}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Inspection of Crankshaft Main Bearings{1203}
Inspection of Crankshaft Main Bearings{1203}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Technical Information Bulletin
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Specifications
Cylinder Liner
3500 Locomotive Engines
Cylinder Block
3500 Locomotive Engines
Piston and Rings - One-Piece Piston
3500 Locomotive Engines
Connecting Rod
3500 Locomotive Engines
Systems Operation
Cylinder Block, Liners and Heads
3500 Locomotive Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Information Release Memo
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500 Locomotive Engines
Cylinder Block
3500 Locomotive Engines
Cylinder Liner Projection
3500 Locomotive Engines
Main Bearings
3500 Locomotive Engines
Disassembly and Assembly
Spacer Plates
3512 & 3516 Locomotive Engines
Piston Cooling Jets
3512 & 3516 Locomotive Engines
Crankshaft Main Bearings
3512 & 3516 Locomotive Engines
Cylinder Liners
3512 & 3516 Locomotive Engines
Camshaft Bearings
3512 & 3516 Locomotive Engines
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Steel Plunger Used In Oil Filter Relief Valve Plunger; Use 2P4005 Oil Filters Instead Of 1R0716 Oil Filters{1315,1318}
1992/07/13
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Main Bearings Have Higher Fatigue Strength {1203,1200}
1993/10/04
New O-ring Seal Used On Cylinder Block Covers {1200}
1993/10/11
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
1993/11/09
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Machine Engines {0705, 1201, 1217}
2014/12/05
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Checking Or Adjusting Valve Clearances
1986/01/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
Taller Water Seals Used In Cylinder Head Groups
1992/08/01
Correct Identification Of Rocker Arm Assembly Components
1992/10/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit
1993/02/01
Valve Seat Insert Removal Tools
1993/02/01
Use Molycoat Paste Lubricant On Cylinder Head Bolts
1993/07/01
New Cylinder Head Gasket Used
1993/09/01
Intake And Exhaust Valve Lash Increased{1105}
1994/07/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
Longer Inch Cylinder Head Bolt Provides Increased Thread Engagement {1100}
1994/10/01
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
A Chamfer Has Been Added To Some Engine Cylinder Head Bolt Holes To Help Reduce Stress Concentrations And Prevent Cracks {1101}
1996/09/23
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
Improved Water Seal Reduces The Possibility Of Cylinder Head Joint Water Leaks {1100}
1998/01/20
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
Recommended Lubrication And Torque Procedure For Cylinder Head Bolts {1100}
1998/09/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}
1999/02/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124}
2002/12/01
New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
2003/01/01
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/10/01
Oversized Valve Guides are Available {1104}
2005/01/31
Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/11
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
An Improved Outer Valve Spring is Used {1100, 1108}
2006/01/02
A New Cylinder Head Gasket is Used {1124}
2006/07/24
Use the Correct Parts in the Valve Train {1100}
2007/01/22
New Exhaust Valves Are Used in Diesel 3500 Commercial Engines {1100, 1105}
2014/01/13
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Cylinder Heads for 3500 and G3500 Engines {1100}
2015/06/26
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Service Letter-NACD
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Australia
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-CFEL
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-CSARL
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Americas
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Brazil
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Truck/Ag/Marine
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Technical Information Bulletin
Installation Of New Cylinder Port Thermocouples
Installation Of New Cylinder Port Thermocouples
Machining Premachined Valve Seat Inserts
Machining Premachined Valve Seat Inserts
Failure of Reused Rotocoils in 3500 Engines{1100}
Failure of Reused Rotocoils in 3500 Engines{1100}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Specifications
Cylinder Head
3500 Locomotive Engines
Cylinder Head Valves
3500 Locomotive Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Asia
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Systems Operation
Cylinder Block, Liners and Heads
3500 Locomotive Engines
Valve System Components
3500 Locomotive Engines
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Testing and Adjusting
Valve Lash and Valve Bridge Adjustment
3500 Locomotive Engines
Valve Lash Check
3500 Locomotive Engines
Cylinder Heads
3500 Locomotive Engines
Disassembly and Assembly
Cylinder Head Assemblies
3512 & 3516 Locomotive Engines
Valves
3512 & 3516 Locomotive Engines
Bridge Dowels
3512 & 3516 Locomotive Engines
Valve Seat Inserts
3512 & 3516 Locomotive Engines
Valve Guides
3512 & 3516 Locomotive Engines
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Taller Water Seals Used In Cylinder Head Groups {1115}
1992/08/10
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
New Cylinder Head Bolt Tightening Procedure{1100}
1992/12/21
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit {1115}
1993/02/15
New Cylinder Head Gasket Used{1124}
1993/09/20
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
Engine News
New Crankshaft Damper Assembly Used {1205}
1995/04/01
Technical Information Bulletin
Damper Fluid Kits Are not Available Outside of the United States {1205}
Damper Fluid Kits Are not Available Outside of the United States {1205}
Specifications
Vibration Damper Guard
3500 Locomotive Engines
Vibration Damper
3500 Locomotive Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Information Release Memo
REMANUFACTURED DAMPER FOR THE 3500 ENGINE
REMANUFACTURED DAMPER FOR THE 3500 ENGINE
REMANUFACTURED DAMPERS FOR THE 3500 AND 3600 ENGINES
REMANUFACTURED DAMPERS FOR THE 3500 AND 3600 ENGINES
Testing and Adjusting
Vibration Damper
3500 Locomotive Engines
Disassembly and Assembly
Crankshaft Vibration Damper
3512 & 3516 Locomotive Engines
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Engine News
New Accessory Drive Group Includes New Idler Gear Assembly{1207}
1995/02/01
Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
2003/10/01
New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
2010/01/18
Specifications
Accessory Drive (Upper Right Hand)
3500 Locomotive Engines
Disassembly and Assembly
Accessory Drive (Front)
3512 & 3516 Locomotive Engines
Front Drive Housing
3512 & 3516 Locomotive Engines
Engine News
New Accessory Drive Group Includes New Idler Gear Assembly{1207}
1995/02/01
Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
2003/10/01
Improved Auxiliary Drive Coupling {3279}
2003/12/01
New Seal for the Front Housing {1151, 1207}
2004/06/01
Disassembly and Assembly
Accessory Drive (Front)
3512 & 3516 Locomotive Engines
Engine News
Procedure for Tightening the Locknut for the Fan Drive on 3500 Engines {1359}
2003/04/01
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
2014/01/31
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
Reuse And Salvage Guidelines
Specifications for Reusability of the <NOBR>251-7646</NOBR> Fan Drive Bracket Assembly on 3500 Machine Engines {1359}
Specifications for Reusability of the 251-7646 Fan Drive Bracket Assembly on 3500 Machine Engines {1359}
Disassembly and Assembly
Water Pump
3512 & 3516 Locomotive Engines
Oil And Water Pump Drive
3512 & 3516 Locomotive Engines
Service Magazine
New Oil Seal For Water Pumps Has Hydrodynamic Grooves{1361,1389}
1988/11/21
Technical Information Bulletin
Remanufactured Water Pump For 3500 Engine
Remanufactured Water Pump For 3500 Engine
Service Magazine
New Oil Seal For Water Pumps Has Hydrodynamic Grooves{1361,1389}
1988/11/21
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Correct Installation of Front Gear Train Idler Shaft{1237}
1994/11/01
New Accessory Drive Group Includes New Idler Gear Assembly{1207}
1995/02/01
New Flywheels Are Used {1156}
2003/08/01
Heavy Duty, Engine Turning Tool Released {0701, 1156, 1157}
2006/03/20
Technical Information Bulletin
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Specifications
Flywheel
3500 Locomotive Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Testing and Adjusting
Flywheel - Inspect
3500 Locomotive Engines
Disassembly and Assembly
Flywheel
3512 & 3516 Locomotive Engines
Flywheel Housing
3512 & 3516 Locomotive Engines
Rear Gear Group
3512 & 3516 Locomotive Engines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Service Life of Crankshaft Gears Can Be Extended{1204}
1993/07/26
Engine News
Service Life of Crankshaft Gears Can Be Extended
1993/07/01
Correct Installation of Front Gear Train Idler Shaft{1237}
1994/11/01
New Accessory Drive Group Includes New Idler Gear Assembly{1207}
1995/02/01
New Sleeve Bearing Used In Camshaft Idler Gear Assembly In Rear Gear Groups{1206}
1995/11/20
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Front Gear Group Changed To Help Keep Oil Pump Adapter Assembly Bolts Tight{1206,1304}
1999/09/01
Replace the Gear when the Sleeve Bearing is Replaced {1212, 1234}
2005/04/18
A New Oil Pump Adapter Assembly is Used {1206, 1313}
2005/10/31
Procedure for Installing the Camshaft Drive Gear {1212}
2005/12/12
New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
2010/01/18
Special Instruction
Machining of Replacement Sleeve Bearings{1206, 1212, 1234}
Machining of Replacement Sleeve Bearings{1206, 1212, 1234}
Technical Information Bulletin
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Specifications
Gear Group (Front)
3500 Locomotive Engines
Gear Group (Rear)
3500 Locomotive Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Rocker Shaft Assemblies And Push Rods
3512 & 3516 Locomotive Engines
Rear Gear Group
3512 & 3516 Locomotive Engines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Life of Crankshaft Gears Can Be Extended{1204}
1993/07/26
Engine News
New Flywheel Housing Assembly Available{1157}
1999/05/01
Be Sure To Use The Correct Procedure To Remove The Rear Crankshaft Seal And Wear Sleeve{1161}
1999/09/01
Heavy Duty, Engine Turning Tool Released {0701, 1156, 1157}
2006/03/20
Sealing and Installing the Flywheel Housing {1157, 7555}
2006/03/27
Specifications
Flywheel Housing
3500 Locomotive Engines
Reuse And Salvage Guidelines
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Testing and Adjusting
Flywheel Housing - Inspect
3500 Locomotive Engines
Disassembly and Assembly
Crankshaft Rear Seal And Wear Sleeve
3512 & 3516 Locomotive Engines
Flywheel Housing
3512 & 3516 Locomotive Engines
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Engine News
Correct Installation of Front Gear Train Idler Shaft{1237}
1994/11/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Front Gear Group Changed To Help Keep Oil Pump Adapter Assembly Bolts Tight{1206,1304}
1999/09/01
New Seals for the Front Housing {1151, 1207}
2003/10/01
Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
2003/10/01
New Seal for the Front Housing {1151}
2003/11/01
New Seal for the Front Housing {1151, 1207}
2004/06/01
New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
2010/01/18
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3512 & 3516 Locomotive Engines
Front Drive Housing
3512 & 3516 Locomotive Engines
Engine News
New Stronger Engine Lifting Eye Bracket Used{1154}
1995/09/01
New Engine Lifting Eye Assembly {1122}
1998/12/01
Technical Information Bulletin
A Lifting Eye Quality Issue Exists for Certain 3500 Engines {1122}
A Lifting Eye Quality Issue Exists for Certain 3500 Engines {1122}
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Improved Crankshaft Seal Groups Used
1993/10/01
Intake And Exhaust Valve Lash Increased{1105}
1994/07/01
New Oil Pan With Oil Level Sensor Mounting Hole{1302}
1995/01/01
New Accessory Drive Group Includes New Idler Gear Assembly{1207}
1995/02/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Installation Of New Cylinder Port Thermocouples
Installation Of New Cylinder Port Thermocouples
Service Letter-China
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Water Pump
3512 & 3516 Locomotive Engines
Accessory Drive (Front)
3512 & 3516 Locomotive Engines
Oil And Water Pump Drive
3512 & 3516 Locomotive Engines
Crankshaft Vibration Damper
3512 & 3516 Locomotive Engines
Crankshaft Front Seal And Wear Sleeve
3512 & 3516 Locomotive Engines
Front Drive Housing
3512 & 3516 Locomotive Engines
Flywheel
3512 & 3516 Locomotive Engines
Crankshaft Rear Seal And Wear Sleeve
3512 & 3516 Locomotive Engines
Flywheel Housing
3512 & 3516 Locomotive Engines
Rocker Shaft Assemblies And Push Rods
3512 & 3516 Locomotive Engines
Rocker Shaft Assemblies
3512 & 3516 Locomotive Engines
Spacer Plates
3512 & 3516 Locomotive Engines
Valve Lifters
3512 & 3516 Locomotive Engines
Valve Guides
3512 & 3516 Locomotive Engines
Piston Cooling Jets
3512 & 3516 Locomotive Engines
Rear Gear Group
3512 & 3516 Locomotive Engines
Crankshaft Main Bearings
3512 & 3516 Locomotive Engines
Pistons And Connecting Rod Assemblies
3512 & 3516 Locomotive Engines
Cylinder Liners
3512 & 3516 Locomotive Engines
Camshafts
3512 & 3516 Locomotive Engines
Camshaft Bearings
3512 & 3516 Locomotive Engines
Service Magazine
6V3143 Distorter Adapter Available For Use With 5P7409 Wear Sleeve Distorter For Removal Of Crankshaft Wear Sleeves{0621,1202,1160,1161}
1980/09/08
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Special Procedure Needed To Clean 3500 Series Engine Pistons{0374,1214}
1983/05/30
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Oil Seal For Water Pumps Has Hydrodynamic Grooves{1361,1389}
1988/11/21
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Steel Plunger Used In Oil Filter Relief Valve Plunger; Use 2P4005 Oil Filters Instead Of 1R0716 Oil Filters{1315,1318}
1992/07/13
Correct Identification Of Rocker Arm Assembly Components{1123}
1992/11/09
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
New Cylinder Head Bolt Tightening Procedure{1100}
1992/12/21
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
Service Life of Crankshaft Gears Can Be Extended{1204}
1993/07/26
New Cylinder Head Gasket Used{1124}
1993/09/20
New Crankshaft Seal Groups Prevent Oil Lip Damage {1160,1161}
1993/10/04
Engine News
Improved Alternator Adjusting Rod {1405}
2005/03/07
Service Magazine
Two New Tools Check Tension on Engine Belts {0701, 0767}
2004/05/03
Reuse And Salvage Guidelines
Specifications for the Inspection of Trunnions for Series 3500 Family of Engines {1154}
Specifications for the Inspection of Trunnions for Series 3500 Family of Engines {1154}
Inspection of Rear Engine Mounts on 3500 Family of Engines {1152, 1154}
Inspection of Rear Engine Mounts on 3500 Family of Engines {1152, 1154}
Service Magazine
New Service Magazine Special Edition (Product Support Update-3500 Machine Engines) Available {1000}
1997/05/05
Engine News
New Oil Pan With Oil Level Sensor Mounting Hole{1302}
1995/01/01
Summary Of Improvements To Deep Sump Oil Pans{1302}
1999/09/01
New Oil Pans {1302}
2003/10/01
Technical Information Bulletin
Oil Pan Cracking
Oil Pan Cracking
Specifications
Engine Oil Pan
3500 Locomotive Engines
Reuse And Salvage Guidelines
Reuse and Salvage for 3500, 3600 & C175 Engine Oil Pans {1302}
Reuse and Salvage for 3500, 3600 & C175 Engine Oil Pans {1302}
Disassembly and Assembly
Oil Pan
3512 & 3516 Locomotive Engines
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Engine News
Reliability And Fatigue Strength Improved In Connecting Rod {1218,1219}
1997/08/01
New Cover Seals are Available {1107, 1201, 1210}
2003/05/01
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
Special Procedure Needed To Clean 3500 Series Engine Pistons
1983/07/06
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01
New Connecting Rod Assembly Used
1992/11/01
New Connecting Rod Bearing Used In Piston And Rod Groups
1993/01/01
New 9U7360 Piston Ring Groove Gauge Group Available
1993/10/01
New Connecting Rod Identification Used On Engines
1993/10/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
New Connecting Rod Assembly Has Increased Fatigue Strength{1218}
1994/12/01
Connecting Rod Assembly Includes New Rod Eye Sleeve Bearing {1218,1219}
1995/04/01
New Rod Bearings Have Higher Fatigue Strength {1219}
1995/05/01
5P-8665 Liner Puller Group Changed To Accommodate Cylinder Liner With Larger Diameter Top Flange{1216}
1995/09/01
Installation Of Piston Pin Retainer {1215}
1997/02/17
Structural Improvement To Piston Permits Removal Of Piston Coatings{1214}
1997/05/01
Reliability And Fatigue Strength Improved In Connecting Rod {1218,1219}
1997/08/01
Process Changes Result In Improved 3500 Engine Remanufactured Connecting Rod Assembly{1218}
1998/03/01
New Remanufactured 3500 Engine Connecting Rod Results From Improved Remanufacturing Processes {1218}
1998/07/01
Piston And Piston Ring Reference Chart For 3500 And 3500B Engines {1214,1215}
1998/08/01
New Piston Rings Provide Increased Service Life {1215}
1998/08/01
The Causes Of Worn And Broken Piston Rings {1215}
1998/08/01
Recommended Lubrication And Torque Procedure For Connecting Rod Bolts {1218}
1998/09/01
New Connecting Rod Assembly Provides Increased Rod Eye Bushing Retention{1218}
1998/10/01
New Connecting Rod Assembly Provides Increased Rod Eye Bushing Retention {1218}
1998/11/01
A New Top Piston Ring Promotes Reduced Cylinder Liner Wear {1214, 1215}
2002/12/01
Use the Correct Tooling for Installing Piston Rings {1214, 1215}
2003/03/01
New Fabricated Tool for Piston Pin Installation {1225}
2003/08/01
Introduction of New Pistons and Remanufactured Cylinder Packs {1214, 1239}
2006/06/26
Some Pistons and Cylinder Packs are Cancelled and Replaced {1214}
2006/06/26
The Piston Pin Retainer Is Now Marked for Correct Orientation {1214}
2004/02/01
A Parts Kit for the Piston Cooling Jets and Retainers for the Piston Cooling Jets is Now Cancelled {1331}
2004/06/01
The Piston Pin Retainer is Now Marked for Correct Orientation {1214}
2004/03/01
A New Piston Pin Retainer is Used {1214}
2004/06/01
Addition to Specifications for "Piston and Rings (One-Piece Piston)" {1214, 1215}
2005/01/31
Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/11
New Piston and Rod Group {1225}
2006/06/26
New Procedure for Measuring the Connecting Rod {1218, 1225}
2006/08/14
New Piston Assemblies Are Used {1225}
2008/07/14
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331}
Install the Correct Piston Cooling Jet and the Correct Retainer for the One-Piece Piston{1214, 1331}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
Certain Connecting Rod Assemblies Need To Be Removed From Parts Stock
Certain Connecting Rod Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Deburr Process For 3500 Connecting Rods Improves Reusability And Decreases Rod To Crankshaft Wear
Deburr Process For 3500 Connecting Rods Improves Reusability And Decreases Rod To Crankshaft Wear
Information that is required to understanding and the determining of the root cause of a piston pin joint failure
Information that is required to understanding and the determining of the root cause of a piston pin joint failure
Failure of Some Bearings In 3500 and G3600 Engines{1225}
Failure of Some Bearings In 3500 and G3600 Engines{1225}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Do Not Use Unapproved Connecting Rod 7N-2405 Bolts for 3500 and G3500 Engines{1225, 7553}
Do Not Use Unapproved Connecting Rod 7N-2405 Bolts for 3500 and G3500 Engines{1225, 7553}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
3500 Locomotive Engines
Piston and Rings - One-Piece Piston
3500 Locomotive Engines
Connecting Rod
3500 Locomotive Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
Certain Connecting Rod Assemblies Need To Be Removed From Parts Stock
Certain Connecting Rod Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Pistons, Rings and Connecting Rods - Two-Piece Piston
3500 Locomotive Engines
Pistons, Rings and Connecting Rods - One-Piece Piston
3500 Locomotive Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
Service Letter-APD
Certain Connecting Rod Assemblies Need To Be Removed From Parts Stock
Certain Connecting Rod Assemblies Need To Be Removed From Parts Stock
Testing and Adjusting
Compression
3500 Locomotive Engines
Excessive Bearing Wear - Inspect
3500 Locomotive Engines
Connecting Rod Bearings
3500 Locomotive Engines
Crankcase Pressure
3500 Locomotive Engines
Disassembly and Assembly
Connecting Rod Bearings
3512 & 3516 Locomotive Engines
Pistons And Connecting Rod Assemblies
3512 & 3516 Locomotive Engines
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Special Procedure Needed To Clean 3500 Series Engine Pistons{0374,1214}
1983/05/30
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Connecting Rod Assembly Used{1218}
1992/11/16
New Connecting Rod Bearing Used In Piston And Rod Groups {1219}
1993/01/25
New 9U7360 Piston Ring Groove Gauge Group Available {0763,1214,1215}
1993/10/11
New Connecting Rod Identification Used On Engines {1218}
1993/10/11
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
New Copper Lead Main and Connecting Rod Bearings Are Available For All 3500 Diesel Machine Engines {1203, 1219}
2015/01/28
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
New Crankshaft Damper Assembly Used {1205}
1995/04/01
New Seal for the Front Housing {1151, 1207}
2004/06/01
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
2014/01/31
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Crankshaft Vibration Damper
3512 & 3516 Locomotive Engines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two New Tools Check Tension on Engine Belts {0701, 0767}
2004/05/03
Engine News
Correct Installation of Front Gear Train Idler Shaft{1237}
1994/11/01
The Torque Has Been Increased For The Bolts That Fasten The Stub Shafts To The Engine Cylinder Block {1237}
2002/05/01
New 6V87 Gauge Measures Valve Stem Wear
1979/01/10
Separate Valve Stem Gauges Available
1982/08/25
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
New 9U7360 Piston Ring Groove Gauge Group Available
1993/10/01
Service Tools For Electronic Controls{0781,0782}
1994/05/01
Dynamometer Testing of Electronic Engines{1000}
1995/10/01
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
Heavy Duty, Engine Turning Tool Released {0701, 1156, 1157}
2006/03/20
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U-8860 Large Engine Blowby Pickup Group{0781, 0785}
Using the 1U-8860 Large Engine Blowby Pickup Group{0781, 0785}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}
Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New 9U7360 Piston Ring Groove Gauge Group Available {0763,1214,1215}
1993/10/11
Service Tools For Electronic Controls {0781,0782}
1994/04/25
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
Two New Tools Check Tension on Engine Belts {0701, 0767}
2004/05/03
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
An Improved Alternator Belt is Used {1357}
2003/08/01
A New Special Instruction, REHS2259 , "Fabricated Tool for Alternate Method of Tightening Fan Drive Belts" is Available {1357, 1397}
2004/06/01
Special Instruction
Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397}
Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397}
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Checking Or Adjusting Valve Clearances
1986/01/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
Taller Water Seals Used In Cylinder Head Groups
1992/08/01
Correct Identification Of Rocker Arm Assembly Components
1992/10/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit
1993/02/01
Valve Seat Insert Removal Tools
1993/02/01
New Cylinder Head Gasket Used
1993/09/01
Intake And Exhaust Valve Lash Increased{1105}
1994/07/01
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
A Chamfer Has Been Added To Some Engine Cylinder Head Bolt Holes To Help Reduce Stress Concentrations And Prevent Cracks {1101}
1996/09/23
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New Cover Seals are Available {1107, 1201, 1210}
2003/05/01
New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
2003/01/01
A Pin for the Rocker Shaft Is Now Available for Parts Service {1102}
2003/08/01
New Rocker Arm Improves Lubrication {1123}
2003/09/01
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/12/01
A New Dowel Improves Lubrication to the Rocker Assembly {1123, 1123}
2003/12/01
An Improved Lifter Is Used for 3500 Engines with Mechanical Unit Injectors {1102, 1121, 1123}
2011/03/09
Importance of Proper Valve Lash Setting {1102, 1121, 1123}
2012/10/04
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Service Letter-NACD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Installation Of New Cylinder Port Thermocouples
Installation Of New Cylinder Port Thermocouples
Specifications
Fuel Injector Mechanism
3500 Locomotive Engines
Valve Mechanism
3500 Locomotive Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
Service Letter-China
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
REMANUFACTURED VALVE LIFTERS FOR THE 3500 ENGINE
REMANUFACTURED VALVE LIFTERS FOR THE 3500 ENGINE
REMANUFACTURED VALVE ROCKER ARMS FOR THE 3500 ENGINE
REMANUFACTURED VALVE ROCKER ARMS FOR THE 3500 ENGINE
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Testing and Adjusting
Finding the Top Center Position for the No. 1 Piston
3500 Locomotive Engines
Valve Lash and Valve Bridge Adjustment
3500 Locomotive Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500 Locomotive Engines
Valve Lash Check
3500 Locomotive Engines
Disassembly and Assembly
Valve Covers
3512 & 3516 Locomotive Engines
Rocker Shaft Assemblies And Push Rods
3512 & 3516 Locomotive Engines
Rocker Shaft Assemblies
3512 & 3516 Locomotive Engines
Valve Lifters
3512 & 3516 Locomotive Engines
Bridge Dowels
3512 & 3516 Locomotive Engines
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Correct Identification Of Rocker Arm Assembly Components{1123}
1992/11/09
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
New Cylinder Head Bolt Tightening Procedure{1100}
1992/12/21
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Cylinder Head Gasket Used{1124}
1993/09/20
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
Disassembly and Assembly
Flywheel Housing
3512 & 3516 Locomotive Engines
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Engine News
Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
2003/10/01
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

Caterpillar 3508, Stationary Generator Sets, Construction
61,000 
Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
307.208 
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3508, Industrial engines, Construction
84,962 
Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction


 
145.548 
Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.