AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3508 LOCOMOTIVE ENGINE 6TJ00001-UP ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



LOCOMOTIVE ENGINE 3508 LOCOMOTIVE ENGINE 6TJ
 3508 LOCOMOTIVE ENGINE 6TJ00001-UP SEBP1988 3508 6TJ   (1991)

Parts group 3508:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
THERMOCOUPLE GP
127-8129 THERMOCOUPLE GP
127-8129 THERMOCOUPLE GP
INSTALLED IN EXHAUST MANIFOLD AHEAD OF TURBINE INLETS
AN ATTACHMENT
THERMOCOUPLE GP
7E-8098 THERMOCOUPLE GP
7E-8098 THERMOCOUPLE GP
AN ATTACHMENT
BOX GP
BOX & MOUNTING GP
4P-5241 BOX & MOUNTING GP
4P-5241 BOX & MOUNTING GP
MAGNETIC SWITCH
AN ATTACHMENT
BOX GP-JUNCTION
108-5564 BOX GP-JUNCTION
108-5564 BOX GP-JUNCTION
S/N 6TJ1-99999
FOR USE WITH 64-VOLT STARTING SYSTEMS
AN ATTACHMENT
BOX GP-JUNCTION
108-5565 BOX GP-JUNCTION
108-5565 BOX GP-JUNCTION
S/N 6TJ1-99999
PART OF 257-5609 BOX GP-JUNCTION
AN ATTACHMENT
BOX GP-JUNCTION
257-5609 BOX GP-JUNCTION
257-5609 BOX GP-JUNCTION
S/N 6TJ1-99999
PART OF 108-5564 BOX GP-JUNCTION
AN ATTACHMENT
BOX GP-JUNCTION
4P-0258 BOX GP-JUNCTION
4P-0258 BOX GP-JUNCTION
PART OF 4P-8985 SHUTOFF GP-ELECTRICAL
AN ATTACHMENT
BOX GP-JUNCTION
4P-3779 BOX GP-JUNCTION
4P-3779 BOX GP-JUNCTION
ENGINE MOUNTED
AN ATTACHMENT
BOX GP-JUNCTION
4P-3863 BOX GP-JUNCTION
4P-3863 BOX GP-JUNCTION
ENGINE MOUNTED
PART OF 4P-3779 BOX GP-JUNCTION
AN ATTACHMENT
BOX GP-JUNCTION
4P-4886 BOX GP-JUNCTION
4P-4886 BOX GP-JUNCTION
PART OF 4P-3863 BOX GP-JUNCTION
AN ATTACHMENT
BOX GP-JUNCTION
4P-5660 BOX GP-JUNCTION
4P-5660 BOX GP-JUNCTION
PART OF 4P-5241 BOX & MOUNTING GP
AN ATTACHMENT
BOX GP-JUNCTION
6I-2203 BOX GP-JUNCTION
6I-2203 BOX GP-JUNCTION
PART OF 6I-2204 BOX GP-JUNCTION
AN ATTACHMENT
BOX GP-JUNCTION
6I-2204 BOX GP-JUNCTION
6I-2204 BOX GP-JUNCTION
AN ATTACHMENT
BOX GP-JUNCTION
6I-2205 BOX GP-JUNCTION
6I-2205 BOX GP-JUNCTION
PART OF 6I-2203 BOX GP-JUNCTION
AN ATTACHMENT
BOX GP-JUNCTION
6I-3160 BOX GP-JUNCTION
6I-3160 BOX GP-JUNCTION
PART OF 6I-3161 SHUTOFF GP-ELECTRICAL
AN ATTACHMENT
BOX GP-JUNCTION
7E-5592 BOX GP-JUNCTION
7E-5592 BOX GP-JUNCTION
PART OF 4P-4886, 6I-2205 BOX GP-JUNCTION
AN ATTACHMENT
CONTACTOR GP
CONTACTOR GP
4P-8982 CONTACTOR GP
4P-8982 CONTACTOR GP
PART OF 4P-8985, 6I-3161 SHUTOFF GP-ELECTRICAL
AN ATTACHMENT
ELECTRONICS GP-ENGINE
CONTROL & MTG GP-ENGINE ELEK
3E-7894 CONTROL & MTG GP-ENGINE ELEK
3E-7894 CONTROL & MTG GP-ENGINE ELEK
LOCO II / SURGE
PART OF 3E-7895, 3E-7902 CONTROL & MTG GP-ENGINE ELEK
AN ATTACHMENT
CONTROL & MTG GP-ENGINE ELEK
3E-7895 CONTROL & MTG GP-ENGINE ELEK
3E-7895 CONTROL & MTG GP-ENGINE ELEK
LOCO II / SURGE
PART OF 3E-7896 CONTROL & MTG GP-ENGINE ELEK
AN ATTACHMENT
CONTROL & MTG GP-ENGINE ELEK
3E-7896 CONTROL & MTG GP-ENGINE ELEK
3E-7896 CONTROL & MTG GP-ENGINE ELEK
LOCO II/SURGE
AN ATTACHMENT
CONTROL & MTG GP-ENGINE ELEK
3E-7900 CONTROL & MTG GP-ENGINE ELEK
3E-7900 CONTROL & MTG GP-ENGINE ELEK
LOCO II/SURGE
AN ATTACHMENT
CONTROL & MTG GP-ENGINE ELEK
3E-7902 CONTROL & MTG GP-ENGINE ELEK
3E-7902 CONTROL & MTG GP-ENGINE ELEK
LOCO II/SURGE
PART OF 3E-7900 CONTROL & MTG GP-ENGINE ELEK
AN ATTACHMENT
CONTROL & MTG GP-ENGINE ELEK
4P-2714 CONTROL & MTG GP-ENGINE ELEK
4P-2714 CONTROL & MTG GP-ENGINE ELEK
AN ATTACHMENT
CONTROL & MTG GP-ENGINE ELEK
9X-9374 CONTROL & MTG GP-ENGINE ELEK
9X-9374 CONTROL & MTG GP-ENGINE ELEK
S/N 6TJ1-99999
PART OF 9X-9375, 9X-9626 CONTROL & MTG GP-ENGINE ELEK
ALSO AN ATTACHMENT
CONTROL & MTG GP-ENGINE ELEK
9X-9375 CONTROL & MTG GP-ENGINE ELEK
9X-9375 CONTROL & MTG GP-ENGINE ELEK
PART OF 9X-9617 CONTROL & MTG GP-ENGINE ELEK
AN ATTACHMENT
CONTROL & MTG GP-ENGINE ELEK
9X-9617 CONTROL & MTG GP-ENGINE ELEK
9X-9617 CONTROL & MTG GP-ENGINE ELEK
AN ATTACHMENT
CONTROL & MTG GP-ENGINE ELEK
9X-9621 CONTROL & MTG GP-ENGINE ELEK
9X-9621 CONTROL & MTG GP-ENGINE ELEK
S/N 6TJ1-99999
ELECTRONIC-LOCO II
PART OF 4P-3703 GOVERNOR GP
CONTROL & MTG GP-ENGINE ELEK
9X-9626 CONTROL & MTG GP-ENGINE ELEK
9X-9626 CONTROL & MTG GP-ENGINE ELEK
ELECTRONIC-LOCO II
PART OF 9X-9621 CONTROL & MTG GP-ENGINE ELEK
CONTROL & MTG GP-ENGINE ELEK
9X-9626 CONTROL & MTG GP-ENGINE ELEK
9X-9626 CONTROL & MTG GP-ENGINE ELEK
S/N 6TJ1-99999
ELECTRONIC-LOCO II
PART OF 9X-9621 CONTROL & MTG GP-ENGINE ELEK
CONTROL GP-ENG RATINGS ELEK
108-0207 CONTROL GP-ENG RATINGS ELEK
108-0207 CONTROL GP-ENG RATINGS ELEK
AN ATTACHMENT
CONTROL GP-ENG RATINGS ELEK
3E-2211 CONTROL GP-ENG RATINGS ELEK
3E-2211 CONTROL GP-ENG RATINGS ELEK
AN ATTACHMENT
CONTROL GP-ENG RATINGS ELEK
3E-3411 CONTROL GP-ENG RATINGS ELEK
3E-3411 CONTROL GP-ENG RATINGS ELEK
AN ATTACHMENT
CONTROL GP-ENG RATINGS ELEK
9X-6813 CONTROL GP-ENG RATINGS ELEK
9X-6813 CONTROL GP-ENG RATINGS ELEK
PART OF 108-0207, 3E-2211, 3E-3411 CONTROL GP-ENG RATINGS ELEK, 122-0779 CONTROL GP-ENGINE ELECTRONIC
AN ATTACHMENT
CONTROL GP-ENGINE ELECTRONIC
122-0779 CONTROL GP-ENGINE ELECTRONIC
122-0779 CONTROL GP-ENGINE ELECTRONIC
AN ATTACHMENT
CONTROL GP-ENGINE ELECTRONIC
3E-5294 CONTROL GP-ENGINE ELECTRONIC
3E-5294 CONTROL GP-ENGINE ELECTRONIC
LOCO SURGE SUPPRESSION
PART OF 3E-7894 CONTROL & MTG GP-ENGINE ELEK
AN ATTACHMENT
CONTROL GP-ENGINE ELECTRONIC
6T-9593 CONTROL GP-ENGINE ELECTRONIC
6T-9593 CONTROL GP-ENGINE ELECTRONIC -RACK POSITION
S/N 6TJ1-99999
PART OF 4P-3783 CONTROL & HOUSING GP-GOVERNOR
CONTROL GP-ENGINE ELECTRONIC
7E-9327 CONTROL GP-ENGINE ELECTRONIC
7E-9327 CONTROL GP-ENGINE ELECTRONIC
AN ATTACHMENT
FASTENER GP-PERSONALITY MODULE
4P-8145 FASTENER GP-PERSONALITY MODULE
4P-8145 FASTENER GP-PERSONALITY MODULE
AN ATTACHMENT
SENSOR GP
SWITCH GP-COOLANT LEVEL
7N-4885 SWITCH GP-COOLANT LEVEL
7N-4885 SWITCH GP-COOLANT LEVEL
FOR USE WITH EXPANSION TANK
AN ATTACHMENT
SENSOR GP-SPEED
117-4739 SENSOR GP-SPEED
117-4739 SENSOR GP-SPEED -ENGINE
S/N 6TJ14-99999
TACHOMETER
PART OF 2W-9592 METER GP-SERVICE
SENSOR GP-SPEED
189-5746 SENSOR GP-SPEED
189-5746 SENSOR GP-SPEED
S/N 6TJ14-UP
FIELD REPLACEMENT FOR @@@@@ 3E-7886@@@@@
SENSOR GP-SPEED
3E-7886 SENSOR GP-SPEED
3E-7886 SENSOR GP-SPEED
S/N 6TJ14-UP
PART OF 117-4739 SENSOR GP-SPEED
FIELD REPLACEMENT ORDER @@@@@189-5746@@@@@, 1-155-2270 KIT-CONNECTING PLUG, 2-186-3736 SOCKET-CONNECTOR
SENSOR GP-SPEED
4P-3483 SENSOR GP-SPEED
4P-3483 SENSOR GP-SPEED
PART OF 4P-8985, 6I-3161 SHUTOFF GP-ELECTRICAL
AN ATTACHMENT
SENSOR GP-TEMPERATURE
124-0326 SENSOR GP-TEMPERATURE
124-0326 SENSOR GP-TEMPERATURE
PART OF 127-8129 THERMOCOUPLE GP
AN ATTACHMENT
SHUTOFF GP
SHUTOFF GP-AIR
2W-7163 SHUTOFF GP-AIR
2W-7163 SHUTOFF GP-AIR
PART OF 4W-3047 SHUTOFF GP-AIR
SHUTOFF GP-AIR
2W-7163 SHUTOFF GP-AIR
2W-7163 SHUTOFF GP-AIR
S/N 6TJ1-99999
PART OF 4W-3047 SHUTOFF GP-AIR
SHUTOFF GP-AIR
4W-3047 SHUTOFF GP-AIR
4W-3047 SHUTOFF GP-AIR -INTAKE
S/N 6TJ1-99999
PART OF 4P-8273 LINES GP-AIR
FOR USE WITH HYDRAMECHANICAL SHUTOFF
4P-8985 SHUTOFF GP-ELECTRICAL
4P-8985 SHUTOFF GP-ELECTRICAL
AN ATTACHMENT
6I-3161 SHUTOFF GP-ELECTRICAL
6I-3161 SHUTOFF GP-ELECTRICAL
AN ATTACHMENT
SOLENOID GP-SHUTOFF
7W-8641 SOLENOID GP-SHUTOFF
7W-8641 SOLENOID GP-SHUTOFF -AIR
S/N 6TJ1-99999
64 VOLT DC
SOLENOID GP
SOLENOID AS-STARTING MOTOR
3T-5051 SOLENOID AS-STARTING MOTOR
3T-5051 SOLENOID AS-STARTING MOTOR
32 VOLT
PART OF 3T-8943, 3T-8948 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
SOLENOID GP-SHUTOFF
7W-8641 SOLENOID GP-SHUTOFF
7W-8641 SOLENOID GP-SHUTOFF -AIR
S/N 6TJ1-99999
64 VOLT DC
STARTING AID GP
STARTING AID GP-ETHER
4P-8295 STARTING AID GP-ETHER
4P-8295 STARTING AID GP-ETHER
AN ATTACHMENT
STARTING MOTOR GP
COVER GP-STARTING MOTOR
4P-4981 COVER GP-STARTING MOTOR
4P-4981 COVER GP-STARTING MOTOR
AN ATTACHMENT
PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
PART OF 107-0997 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
SOLENOID AS-STARTING MOTOR
3T-5051 SOLENOID AS-STARTING MOTOR
3T-5051 SOLENOID AS-STARTING MOTOR
32 VOLT
PART OF 3T-8943, 3T-8948 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
107-0997 STARTING MOTOR GP-ELECTRIC
107-0997 STARTING MOTOR GP-ELECTRIC
PART OF 108-5546 STARTING MOTOR GP-ELECTRIC
Type 1
FIELD REPLACEMENT FOR @@@@@ 3T-8943@@@@@
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
107-0997 STARTING MOTOR GP-ELECTRIC
107-0997 STARTING MOTOR GP-ELECTRIC
PART OF 108-5546 STARTING MOTOR GP-ELECTRIC
Type 2
FIELD REPLACEMENT FOR @@@@@ 3T-8943@@@@@
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
108-5546 STARTING MOTOR GP-ELECTRIC
108-5546 STARTING MOTOR GP-ELECTRIC
FOR USE WITH 64-VOLT STARTING SYSTEM
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-8943 STARTING MOTOR GP-ELECTRIC
3T-8943 STARTING MOTOR GP-ELECTRIC
32-VOLT
PART OF 7C-1716 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 3T-8948@@@@@, @@@@@ 6V-0501@@@@@, @@@@@107-0997@@@@@
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
3T-8948 STARTING MOTOR GP-ELECTRIC
3T-8948 STARTING MOTOR GP-ELECTRIC
32 VOLT
FIELD REPLACEMENT ORDER @@@@@ 6V-0501@@@@@
FIELD REPLACEMENT FOR @@@@@ 3T-8943@@@@@
STARTING MOTOR GP-ELECTRIC
3T-8948 STARTING MOTOR GP-ELECTRIC
3T-8948 STARTING MOTOR GP-ELECTRIC
32 VOLT
FIELD REPLACEMENT ORDER @@@@@ 6V-0501@@@@@
FIELD REPLACEMENT FOR @@@@@ 3T-8943@@@@@
FIELD INSTALLATION
STARTING MOTOR GP-ELECTRIC
6V-0501 STARTING MOTOR GP-ELECTRIC
6V-0501 STARTING MOTOR GP-ELECTRIC
32-VOLT
FIELD REPLACEMENT FOR @@@@@ 3T-8943@@@@@, @@@@@ 3T-8948@@@@@, @@@@@ 6V-0508@@@@@
FIELD INSTALLATION
STARTING MOTOR GP-ELECTRIC
6V-0508 STARTING MOTOR GP-ELECTRIC
6V-0508 STARTING MOTOR GP-ELECTRIC
PART OF 7C-1716 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-0501@@@@@
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
7C-1716 STARTING MOTOR GP-ELECTRIC
7C-1716 STARTING MOTOR GP-ELECTRIC
64 VOLT. DUAL
Type 1
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
7C-1716 STARTING MOTOR GP-ELECTRIC
7C-1716 STARTING MOTOR GP-ELECTRIC
64 VOLT. DUAL
Type 2
AN ATTACHMENT
WIRING GP-ELECTRIC STARTING
108-5570 WIRING GP-ELECTRIC STARTING
108-5570 WIRING GP-ELECTRIC STARTING
FOR USE WITH 64V STARTING SYSTEMS
AN ATTACHMENT
SWITCH GP
SWITCH GP-MAGNETIC
7C-3124 SWITCH GP-MAGNETIC
7C-3124 SWITCH GP-MAGNETIC -DUAL
64-VOLT
FOR USE WITH DUAL 64-VOLT ELECTRIC STARTING MOTOR
AN ATTACHMENT
WIRING GP
CONNECTOR
5N-2126 CONNECTOR
5N-2126 CONNECTOR -THERMOCOUPLE
AN ATTACHMENT
FASTENER GP-WIRING HARNESS
108-5576 FASTENER GP-WIRING HARNESS
108-5576 FASTENER GP-WIRING HARNESS
AN ATTACHMENT
FASTENER GP-WIRING HARNESS
4P-8983 FASTENER GP-WIRING HARNESS
4P-8983 FASTENER GP-WIRING HARNESS
AN ATTACHMENT
WIRING GP-ELECTRIC STARTING
108-5570 WIRING GP-ELECTRIC STARTING
108-5570 WIRING GP-ELECTRIC STARTING
FOR USE WITH 64V STARTING SYSTEMS
AN ATTACHMENT
RELAY GP
RELAY AS
7E-9325 RELAY AS
7E-9325 RELAY AS
AN ATTACHMENT
ELECTRONICS GP-MONITOR
CONTROL GP-ENGINE MONITORING
101-8290 CONTROL GP-ENGINE MONITORING
101-8290 CONTROL GP-ENGINE MONITORING
S/N 6TJ1-99999
LOCO II ALT DERATE
PART OF 3E-7902, 9X-9626 CONTROL & MTG GP-ENGINE ELEK
ALSO AN ATTACHMENT
CONTROL GP-ENGINE MONITORING
9X-0369 CONTROL GP-ENGINE MONITORING
9X-0369 CONTROL GP-ENGINE MONITORING
TEMPERATURE/INTERFACE II
PART OF 4P-3863, 6I-2203 BOX GP-JUNCTION
AN ATTACHMENT
CONTROL GP-ENGINE MONITORING
9X-6801 CONTROL GP-ENGINE MONITORING
9X-6801 CONTROL GP-ENGINE MONITORING
PART OF 9X-9626 CONTROL & MTG GP-ENGINE ELEK
REPLACED BY @@@@@101-8290@@@@@
HARNESS GP
108-5577 HARNESS AS-POWER
108-5577 HARNESS AS-POWER
STARTER
AN ATTACHMENT
HARNESS AS-WIRING
4P-8984 HARNESS AS-WIRING
4P-8984 HARNESS AS-WIRING
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
New Exhaust Manifold Sections Have Locations To Install Temperature Sensors{1059}
1997/04/01
Special Instruction
Installation Procedure For Mobile Exhaust Port Kit On All Select Caterpillar and Non-Caterpillar Diesel Engines {0781, 1408, 1919, 7466}
Installation Procedure For Mobile Exhaust Port Kit On All Select Caterpillar and Non-Caterpillar Diesel Engines {0781, 1408, 1919, 7466}
Disassembly and Assembly
Contactors
3512 & 3516 Locomotive Engines
Service Magazine
Engine Shuts Down Immediately After Start-Up {7400}
1985/10/21
Engine News
New Regulator And Field Coil Assemblies Used
1981/11/25
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
Identification Of External Terminals On Alternators
1987/04/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Repair Parts Available for Alternator R-Terminal {1405}
2000/12/01
Harness Repair of Alternator R-Terminal Connector {1405}
2000/12/01
Improved Alternator Adjusting Rod {1405}
2005/03/07
Improved Design for the Alternator Guard Assembly {7168}
2005/05/30
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Systems Operation
Alternator
3500 Locomotive Engines
Testing and Adjusting
Alternator Regulator
3500 Locomotive Engines
Charging System
3500 Locomotive Engines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Repair Parts Available for Alternator R-Terminal {1405}
2000/10/02
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Two New Tools Check Tension on Engine Belts {0701, 0767}
2004/05/03
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Heavy-Duty Line Of Batteries Available To U.S. Dealers
1986/09/01
5P957 And 5P3514 Coolant And Battery Tester
1987/04/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Safety Vent Caps For Caterpillar Batteries
1977/07/13
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Battery Test Procedure {1401}
Battery Test Procedure {1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
Testing and Adjusting
Battery
3500 Locomotive Engines
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Speed Sensor Available With Improved Reliability{1907}
1994/04/11
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Engine News
New Electronic Speed Switch Assembly Used In Junction Box Groups Increases Service Life
1993/06/01
Special Instruction
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Service Magazine
New Electronic Speed Switch Assembly Used In Junction Box Groups Increases Service Life{1900}
1993/06/07
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Service Magazine
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Engine News
New Electronic Speed Switch Assembly Used In Junction Box Groups Increases Service Life
1993/06/01
Special Instruction
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Specifications
Temperature Contactor - Coolant
3500 Locomotive Engines
Pressure Contactor
3500 Locomotive Engines
Pressure Contactor
3500 Locomotive Engines
Pressure Contactor
3500 Locomotive Engines
Disassembly and Assembly
Water Temperature Contactor
3512 & 3516 Locomotive Engines
Contactors
3512 & 3516 Locomotive Engines
General Service Information
3E3411 Personality Module Standard 4 Axle (No DB)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS
3E1818 Personality Module Standard 4 Axle (No DB)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS
3E0119 Personality Module Standard 4 Axle (Earlier)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS
3E1866 Personality Module High DB 4 Axle (Earlier)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS
3E6249 Personality Module Standard 4 Axle (Later)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS
3E6243 Personality Module High DB 4 Axle (Later)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS
Engine News
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved
1993/11/01
Service Tools For Electronic Controls{0781,0782}
1994/05/01
Help Available For PC Based Service Tools Used For All Electronic Engines {1902}
1996/09/23
Real Time Clock is no Longer Supported {1901}
Real Time Clock is no Longer Supported {1901}
Special Instruction
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/22
Service Tools For Electronic Controls {0781,0782}
1994/04/25
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01
Finding the Latest Flash Files {7620}
2009/10/01
A New Control Module is Available {1900, 1901, 1920}
2009/03/16
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Instruction for Installing 3E-8866 Wire As to Fit Alternate Harness Lengths{1408, 1900, 1901}
Instruction for Installing 3E-8866 Wire As to Fit Alternate Harness Lengths{1408, 1900, 1901}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Tool Operating Manual
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Speed Measurement
3500 Locomotive Engines
Service Magazine
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/22
Service Tools For Electronic Controls {0781,0782}
1994/04/25
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Service Magazine
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Special Instruction
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Engine News
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Service Magazine
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Engine News
New Engine Timing Indicator Group Available
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Testing and Adjusting
Indicators for Engine Oil Pressure
3500 Locomotive Engines
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
General Service Information
3E3411 Personality Module Standard 4 Axle (No DB)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS
3E1818 Personality Module Standard 4 Axle (No DB)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS
3E0119 Personality Module Standard 4 Axle (Earlier)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS
3E1866 Personality Module High DB 4 Axle (Earlier)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS
3E6249 Personality Module Standard 4 Axle (Later)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS
3E6243 Personality Module High DB 4 Axle (Later)
3500 LOCOMOTIVE ENGINES PERSONALITY MODULE SETTINGS
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Heavy-Duty Line Of Batteries Available To U.S. Dealers
1986/09/01
&quot;Ugly's Electrical-References&quot; SEBD0983, Now Available
1990/06/01
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved
1993/11/01
Service Tools For Electronic Controls{0781,0782}
1994/05/01
Help Available For PC Based Service Tools Used For All Electronic Engines {1902}
1996/09/23
Safety Vent Caps For Caterpillar Batteries
1977/07/13
Special Instruction
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Technical Information Bulletin
Loss Of The Desired Speed Signal During Earth Fault Test
Loss Of The Desired Speed Signal During Earth Fault Test
Disassembly and Assembly
Manual Shutoff
3512 & 3516 Locomotive Engines
Water Temperature Contactor
3512 & 3516 Locomotive Engines
Pre-lubrication Oil Pump
3512 & 3516 Locomotive Engines
Contactors
3512 & 3516 Locomotive Engines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting{1400}
1987/05/04
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
4C6534 Harness Now Available To Set Engine Electronic Speed Switches{7427,0779,0785}
1991/03/11
New Electronic Speed Switch Assembly Used In Junction Box Groups Increases Service Life{1900}
1993/06/07
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/22
Speed Sensor Available With Improved Reliability{1907}
1994/04/11
Service Tools For Electronic Controls {0781,0782}
1994/04/25
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Engine News
New Exhaust Manifold Sections Have Locations To Install Temperature Sensors{1059}
1997/04/01
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Service Magazine
Speed Sensor Available With Improved Reliability{1907}
1994/04/11
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Engine News
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved
1993/11/01
Service Tools For Electronic Controls{0781,0782}
1994/05/01
Help Available For PC Based Service Tools Used For All Electronic Engines {1902}
1996/09/23
New Exhaust Manifold Sections Have Locations To Install Temperature Sensors{1059}
1997/04/01
New Engine Pressure Sensors Available {1916,1917,1922,1923,1924}
1999/03/01
Field Returns of the Engine Speed Sensor are Necessary for Failure Analysis and Product Improvement {1907}
2000/06/01
Special Instruction
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Technical Information Bulletin
Loss Of The Desired Speed Signal During Earth Fault Test
Loss Of The Desired Speed Signal During Earth Fault Test
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Specifications
Engine Speed Sensor
3500 Locomotive Engines
Engine Speed Sensor
3500 Locomotive Engines
Engine Speed Sensor
3500 Locomotive Engines
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
New Electronic Speed Switch Assembly Used In Junction Box Groups Increases Service Life{1900}
1993/06/07
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/22
Speed Sensor Available With Improved Reliability{1907}
1994/04/11
Service Tools For Electronic Controls {0781,0782}
1994/04/25
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Engine News
Shorter Rack Shutoff Solenoids Available
1993/02/01
Stronger Leaf Spring Used In Air Shut-Off Group{1078}
1995/01/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Specifications
Manual Shutoff
3500 Locomotive Engines
Disassembly and Assembly
Manual Shutoff
3512 & 3516 Locomotive Engines
Air Intake Shutoff
3512 & 3516 Locomotive Engines
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Shorter Rack Shutoff Solenoids Available {1259}
1993/03/01
Engine News
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Adjust Bosch Solenoid If Replaced Or Reinstalled
1988/01/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Shorter Rack Shutoff Solenoids Available
1993/02/01
New Electric Starting Motor Group Available {1453,1467}
1994/05/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Systems Operation
Starting Solenoid
3500 Locomotive Engines
Service Magazine
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Shorter Rack Shutoff Solenoids Available {1259}
1993/03/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Shorter Rack Shutoff Solenoids Available {1259}
1993/03/01
Engine News
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Special Instruction
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Engine Shuts Down Immediately After Start-Up {7400}
1985/10/21
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Testing The Starter On The Engine
1987/05/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
New Electric Starting Motor Group Available {1453,1467}
1994/05/01
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Electric Starting Motor
3500 Locomotive Engines
Starting Motor
Starting Motor - Delco 50-MT
Electric Starting Motor
3500 Locomotive Engines
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor
3500 Locomotive Engines
Component Description
Starting Motor - Delco 50-MT
General Information
Starting Motor - Delco 50-MT
Normal Operation
Starting Motor - Delco 50-MT
Testing and Adjusting
Electric Starting System
3500 Locomotive Engines
Pinion Clearance Adjustment
3500 Locomotive Engines
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT
Field Winding - Test
Starting Motor - Delco 50-MT
Armature - Test
Starting Motor - Delco 50-MT
Brush and Brush Holder - Check
Starting Motor - Delco 50-MT
Pinion Drive - Check
Starting Motor - Delco 50-MT
No Load - Test
Starting Motor - Delco 50-MT
Pinion Clearance - Adjust
Starting Motor - Delco 50-MT
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT
Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT
Disassembly and Assembly
Pre-lubrication Oil Pump
3512 & 3516 Locomotive Engines
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Starting Motor - Disassemble
Starting Motor - Delco 50-MT
Starting Motor - Assemble
Starting Motor - Delco 50-MT
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Engine News
Check For Dirt Before Replacing Pyrometer Switch
1987/01/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Improvements Reduce Vibration To The Low Water Level Switch On Expansion Tanks
1990/08/01
New Electronic Speed Switch Assembly Used In Junction Box Groups Increases Service Life
1993/06/01
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Specifications
Coolant Level Switch
3500 Locomotive Engines
Magnetic Switch
3500 Locomotive Engines
Temperature Switch
3500 Locomotive Engines
Temperature Switch
3500 Locomotive Engines
Pressure Switch - Prelube
3500 Locomotive Engines
Pressure Switch
3500 Locomotive Engines
Pressure Switch
3500 Locomotive Engines
Pressure Switch
3500 Locomotive Engines
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
4C6534 Harness Now Available To Set Engine Electronic Speed Switches{7427,0779,0785}
1991/03/11
New Electronic Speed Switch Assembly Used In Junction Box Groups Increases Service Life{1900}
1993/06/07
Engine News
New Address For Repair Of Diagnostic Tools
1982/06/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
5P957 And 5P3514 Coolant And Battery Tester
1987/04/01
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved
1993/11/01
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
2002/08/01
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 1U-8860 Large Engine Blowby Pickup Group{0781, 0785}
Using the 1U-8860 Large Engine Blowby Pickup Group{0781, 0785}
Tool Operating Manual
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}
Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Test Tools for the Electrical System
3500 Locomotive Engines
Troubleshooting
Service Tools
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Tools
Starting Motor - Delco 50-MT
Service Magazine
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
4C6534 Harness Now Available To Set Engine Electronic Speed Switches{7427,0779,0785}
1991/03/11
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/22
Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25
Two New Tools Check Tension on Engine Belts {0701, 0767}
2004/05/03
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Engine News
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01
Field Returns of the Engine Speed Sensor are Necessary for Failure Analysis and Product Improvement {1907}
2000/06/01
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Instruction for Installing 3E-8866 Wire As to Fit Alternate Harness Lengths{1408, 1900, 1901}
Instruction for Installing 3E-8866 Wire As to Fit Alternate Harness Lengths{1408, 1900, 1901}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System
3500 Locomotive Engines
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
4C6534 Harness Now Available To Set Engine Electronic Speed Switches{7427,0779,0785}
1991/03/11
New Strap-Cable Used In Fastener Group{7553}
1992/07/27
Speed Sensor Available With Improved Reliability{1907}
1994/04/11
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Engine News
Magnetic Switches (Starter Relays) Improved
1988/03/01
Special Instruction
Installing the 6I1864 12 VDC, 6I1868 24 VDC, and 6I1908 32 VDC Relay Kit{1422, 1423}
Installing the 6I1864 12 VDC, 6I1868 24 VDC, and 6I1908 32 VDC Relay Kit{1422, 1423}
Service Magazine
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
Engine News
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Horizontally Mounted Jacket Water Heater Now Used
1987/05/01
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
How To Identify Failures To Electric Jacket Water Heaters{1383}
1988/04/18
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
Special Instruction
Installation Instructions For Product Link 101 Inline Timer{7602}
Installation Instructions For Product Link 101 Inline Timer{7602}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/07/15
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2014/07/15
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606}
2014/08/08
Loss of Daily Reports May Be an Indicator of End of Life for the Product Link<SUP>&reg;</SUP> ECM on PL321SR and PL321VSR Systems {7606}
2014/08/13
Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat<SUP>&reg;</SUP> Products with Cat<SUP>&reg;</SUP> Product Link 121/321 {7606}
2014/12/24
Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06
Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/06/26
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/09/11
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
Special Instruction
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Installation Procedure For Mobile Exhaust Port Kit On All Select Caterpillar and Non-Caterpillar Diesel Engines {0781, 1408, 1919, 7466}
Installation Procedure For Mobile Exhaust Port Kit On All Select Caterpillar and Non-Caterpillar Diesel Engines {0781, 1408, 1919, 7466}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Truck sale:

Caterpillar 3508, Stationary Generator Sets, Construction
61,000 
Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
307.208 
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3508, Industrial engines, Construction
84,962 
Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction


 
145.548 
Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.