AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W-4906 CLUTCH GP PART OF 2W-4907 POWER TAKE-OFF GP AN ATTACHMENT 3306 ENGINE - MACHINE


BASIC ENGINE
CLUTCH GP
CYLINDER BLOCK GP
CYLINDER HEAD GP

ENGINE - MACHINE 3306 ENGINE - MACHINE 64Z
 3306 Industrial Engine 64Z05381-UP SEBP1989 3306 64Z   (2018)

BASIC ENGINE

CLUTCH GP
CLUTCH AS
3N-4128 CLUTCH AS
CLUTCH GP
1W-8856 CLUTCH GP
CLUTCH GP
2W-4900 CLUTCH GP
CLUTCH GP
2W-4906 CLUTCH GP
CLUTCH GP
2W-4908 CLUTCH GP
CLUTCH GP
3N-9097 CLUTCH GP
CLUTCH GP
4P-2270 CLUTCH GP
CLUTCH GP
4P-3073 CLUTCH GP
 

#SEBP19890100
 

2W-4906: CLUTCH GP

2W-4906 CLUTCH GP
PART OF 2W-4907 POWER TAKE-OFF GP
AN ATTACHMENT
i00359273 SEBP1989
2W4906 CLUTCH GP Parts scheme 2W4906 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4810 [1] LEVER AS-HAND  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
2. 6L-3969 [4] PIN  
3. 6L-3964 [8] PIN-COTTER  
4. 6L-3970 [4] PIN  
5. 3N-8427 [1] CARRIER AS-BEARING  
  2F-6938 [1] TUBE  
6. 2W-4904 [2] RING-SEAL  
7. 2L-6010 [2] PLUG-PIPE  
8. 5L-1545 [2] CUP-BEARING  
9. 7L-6551 [2] CONE-BEARING  
10. 9F-2247 [1] PLUG-PIPE  
11. 5L-3556 B [1] SHIM (0.0200-IN THK)(0.14MM THK)  
12. 5L-3557 B [1] SHIM (0.010-IN THK)(0.20MM THK)  
13. 5L-3558 B [1] SHIM (0.007-IN THK)(0.28MM THK)  
14. 5L-3559 B [1] SHIM (0.005-IN THK)(0.56MM THK)  
15. 5L-3613 [1] RETAINER-BEARING  
16. 0S-1594 [6] BOLT (3/8-16X1-IN)  
17. 5L-3560 [3] PLATE-LOCK  
18. 5L-3553 [1] YOKE  
19. 5L-3485 [1] SHAFT-CLUTCH LEVER  
20. 6L-5151 [2] KEY-WOODRUFF  
21. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
22. 3N-1462 [1] PIN AS  
23. 3N-1461 [1] SPRING  
24. 5L-3602 [1] PLATE-PRESSURE  
25. 4P-3020 [3] PLATE-DRIVE  
26. 3N-9175 [1] RING-DRIVE  
27. 4B-4773 [1] LOCK  
28. 4B-4764 [1] NUT  
29. 3N-9176 [1] KEY  
30. 3N-9178 [1] PLATE-HUB & BACK  
31. 5L-3603 [2] PLATE AS-CENTER  
32. 6L-4016 [4] PIN  
33. 6L-3961 [4] PIN-COTTER (PIN)  
34. 5L-3493 [4] LEVER  
35. 5L-3492 [1] YOKE-ADJUSTMENT  
36. 5L-3495 [8] LINK-LEVER  
37. 5L-3496 [1] SLEEVE-SLIDING  
38. 3N-9179 [1] HOUSING-CLUTCH  
39. 5L-3487 [1] COLLAR AS  
40. 5B-2410 [1] HOSE AS (393MM)  
41. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
  9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
42. 1L-6931 [2] SCREW AS-MACHINE (1/4-20X0.5-IN)  
43. 108-3561 C [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
44. 5L-3617 [1] SEAL-RUBBER  
45. 3B-8489 C [1] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
46. 4B-9782 C [1] BALL  
47. 2F-7771 [1] KEY-SQUARE  
48. 5N-7498 [1] SHAFT-CLUTCH  
49. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
50. 0S-1625 [8] BOLT (5/8-11X2.5-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19890101
 

2W-4908: CLUTCH GP

2W-4908 CLUTCH GP
PART OF 2W-4909 POWER TAKE-OFF GP
AN ATTACHMENT
i00359283 SEBP1989
2W4908 CLUTCH GP Parts scheme 2W4908 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4810 [1] LEVER AS-HAND  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
2. 6L-3969 [4] PIN  
  6L-3964 [8] PIN-COTTER  
3. 6L-3970 [4] PIN  
4. 3N-8427 [1] CARRIER AS-BEARING  
  9F-2247 [1] PLUG-PIPE  
5. 2W-4904 [2] RING-SEAL  
6. 5L-3495 [8] LINK-LEVER  
7. 2L-6010 [2] PLUG-PIPE  
8. 5L-1545 [2] CUP-BEARING  
  7L-6551 [2] CONE-BEARING  
9. 5L-3556 B [1] SHIM (0.0200-IN THK)  
  5L-3557 B [1] SHIM (0.010-IN THK)  
  5L-3558 B [1] SHIM (0.007-IN THK)  
  5L-3559 B [1] SHIM (0.005-IN THK)  
10. 5L-3613 [1] RETAINER-BEARING  
11. 0S-1594 [6] BOLT (3/8-16X1-IN)  
  5L-3560 [3] PLATE-LOCK  
12. 5L-3553 [1] YOKE  
13. 5L-3485 [1] SHAFT-CLUTCH LEVER  
  6L-5151 [2] KEY-WOODRUFF  
14. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
15. 3N-1462 [1] PIN AS  
16. 3N-1461 [1] SPRING  
17. 5L-3602 [1] PLATE-PRESSURE  
18. 4P-3020 [3] PLATE-DRIVE  
19. 3N-9175 [1] RING-DRIVE  
20. 4B-4773 [1] LOCK  
21. 4B-4764 [1] NUT  
22. 3N-9176 [1] KEY  
23. 3N-9178 [1] PLATE-HUB & BACK  
24. 5L-3603 [2] PLATE AS-CENTER  
25. 6L-4016 [4] PIN  
26. 6L-3961 [4] PIN-COTTER  
27. 5L-3493 [4] LEVER  
28. 5L-3492 [1] YOKE-ADJUSTMENT  
29. 5L-3496 [1] SLEEVE-SLIDING  
30. 0S-1625 [8] BOLT (5/8-11X2.5-IN)  
31. 5L-3487 [1] COLLAR AS  
31A. 5L-3561 B [2] SHIM (0.06-IN THK)  
31B. 2L-6267 [2] LOCKNUT (3/8-24-THD)  
31C. 0L-1648 [2] BOLT (3/8-24X2.5-IN)  
32. 5B-2410 [1] HOSE AS  
33. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
  9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
34. 1L-6931 [2] SCREW AS-MACHINE (1/4-20X0.5-IN)  
35. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
36. 5L-3617 [1] SEAL-RUBBER  
37. 3N-9179 [1] HOUSING-CLUTCH  
  8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
38. 4B-9782 [1] BALL  
39. 3N-9180 [1] SHAFT-CLUTCH  
40. 5P-3499 [1] BALL BEARING  
  B   USE AS REQUIRED
 

#SEBP19890102
 

3N-9097: CLUTCH GP

3N-9097 CLUTCH GP
PART OF 3N-9098 POWER TAKE-OFF GP
AN ATTACHMENT
i00366955 SEBP1989
3N9097 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4810 [1] LEVER AS-HAND  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
2. 6L-3972 [4] PIN  
  6L-3961 [4] PIN-COTTER  
  1L-4863 [8] WASHER-SPRING  
3. 1L-6931 [2] SCREW AS-MACHINE (1/4-20X0.5-IN)  
4. 6L-3967 [8] PIN  
  6L-3964 [8] PIN-COTTER  
5. 4B-4721 [8] LINK  
6. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
  9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
7. 3H-9572 [1] RING-ADJUSTMENT  
8. 5B-2410 [1] HOSE AS  
9. 4B-4716 [1] COLLAR AS-SLEEVE  
10. 0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4758 B [2] SHIM (0.06-IN THK)  
11. 2L-6010 [1] PLUG-PIPE  
12. 4B-4782 [1] RETAINER  
13. 3F-3729 [1] RING-SNAP  
14. 4L-3527 [1] PLATE-CLUTCH DRIVING  
15. 4H-0002 [4] LEVER  
16. 3N-4086 [1] SHAFT-CLUTCH  
17. 8B-1303 [1] HOUSING-CLUTCH  
  108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
18. 1B-3922 [2] CUP-BEARING  
  6B-3183 [2] CONE-BEARING  
19. 7L-0116 [1] LOCK  
20. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
  3F-9556 [1] LOCKWASHER  
21. 4B-4792 [1] YOKE AS  
22. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
23. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
24. 6L-5151 [2] KEY-WOODRUFF  
25. 4B-4754 [1] SHAFT  
26. 1L-5517 [1] SLEEVE-THROW-OUT  
27. 3N-8125 [1] PLATE AS-PRESSURE  
28. 3N-8123 [1] LOCK PIN  
29. 3N-8124 [1] SPRING  
30. 5N-9316 [1] RING-DRIVE  
31. 4B-4752 [1] NUT  
32. 4B-4772 [1] LOCK  
33. 5B-2417 [1] KEY  
34. 1L-5516 [1] PLATE-CLUTCH  
35. 108-3633 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
  B   USE AS REQUIRED
 

#SEBP19890103
 

4P-2270: CLUTCH GP

4P-2270 CLUTCH GP
PART OF 6I-0415 POWER TAKE-OFF GP
AN ATTACHMENT
i00374578 SEBP1989
4P2270 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-2017 [1] NUT (1-3/4-16-THD)  
  5L-2026 [1] LOCK  
2. 1N-7513 [1] KEY-WOODRUFF  
3. 5L-2016 [1] PLATE-HUB & BACK  
4. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  9F-5644 [2] LOCKWASHER  
5. 2N-1372 [1] RING-DRIVE  
6. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
7. 6L-5151 [2] KEY-WOODRUFF  
8. 4B-4756 [1] SHAFT  
9. 1K-2673 [1] YOKE  
10. 5L-9645 [1] HOUSING  
11. 3N-7952 [2] PLATE-DRIVE  
12. 5D-2751 [6] WASHER-SPRING (0.406X0.687X0.125-IN THK)  
13. 4B-4787 [1] LEVER AS  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
14. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
15. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
16. 2A-4576 [2] CUP-BEARING (TAPERED ROLLER)  
  5L-9656 [2] CONE-BEARING (TAPERED ROLLER)  
17. 5L-9648 [1] RETAINER-BEARING  
18. 4B-4775 [1] HOSE AS  
19. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
  3F-9556 [1] LOCKWASHER  
20. 7L-0116 [1] LOCK  
  5B-6159 [1] SETSCREW-POINT  
21. 5N-6094 [1] SHAFT-CLUTCH  
22. 5L-9647 [1] SLEEVE-SLIDING  
23. 5B-5251 [6] LINK  
  6L-3965 [6] PIN  
  3B-4613 [6] PIN-COTTER  
24. 2L-8262 [1] RING-ADJUSTMENT  
25. 2L-8259 [3] LEVER  
26. 6L-3966 [3] PIN  
  3B-5301 [3] PIN-COTTER  
27. 3N-7953 [1] PLATE AS  
28. 3N-7955 [1] SPRING  
29. 3N-7954 [1] LOCK PIN  
30. 5L-2012 [1] PLATE-CENTER  
31. 1K-2811 [1] COLLAR AS  
  [2] BOLT  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  1K-3621 B [2] SHIM  
32. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
33. 1H-3338 [2] LOCKWASHER  
  1S-7443 [2] SCREW-MACHINE  
34. 108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
  B   USE AS REQUIRED
 

#SEBP19890104
 

4P-3073: CLUTCH GP

4P-3073 CLUTCH GP
PART OF 4P-3074 POWER TAKE-OFF GP
FOR USE WITH SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
AN ATTACHMENT
i00375417 SEBP1989
4P3073 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-3527 [2] PLATE-CLUTCH DRIVING  
2. 5L-9652 [1] HUB  
3. 8B-7987 [1] KEY-WOODRUFF  
4. 5L-9653 [1] NUT  
  5L-9654 [1] LOCK  
5. 3H-9571 [1] PLATE-CENTER  
6. 5N-9317 [1] RING-DRIVE  
7. 7F-8897 [1] PLATE  
8. 3H-9572 [1] RING-ADJUSTMENT  
9. 3H-9574 [1] SLEEVE  
10. 4B-4754 [1] SHAFT  
  6L-5151 [2] KEY-WOODRUFF  
11. 4B-4792 [1] YOKE AS  
12. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
13. 1A-1460 [6] BOLT (1/2-13X2-IN)  
  5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 5L-9655 [1] RETAINER-BEARING  
15. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
16. 4B-4716 [1] COLLAR AS-SLEEVE  
17. 0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4758 B [2] SHIM (0.06-IN THK)  
18. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
  3F-9556 [1] LOCKWASHER  
  5B-2407 [1] LOCK  
19. 5B-2410 E [1] HOSE AS (38.1-CM)  
20. 4B-4721 [8] LINK  
  6L-3967 [8] PIN  
  3B-5301 [8] PIN-COTTER  
21. 6L-3972 [4] PIN  
  3B-4627 [4] PIN-COTTER  
  1L-4863 [8] WASHER-SPRING  
22. 4H-0002 [4] LEVER  
23. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)(SERVICING)  
24. 3N-8125 [1] PLATE AS-PRESSURE  
25. 3N-8124 [1] SPRING  
  3N-8123 [1] LOCK PIN  
26. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
27. 3N-4896 [1] SHAFT-CLUTCH  
28. 1S-7443 [4] SCREW-MACHINE  
  1H-3338 [4] LOCKWASHER  
29. 6B-3223 [2] CUP-BEARING  
30. 4B-7270 [2] CONE-BEARING  
31. 4B-4810 [1] LEVER AS-HAND  
32. 7F-8916 [1] CARRIER-BEARING  
33. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
34. 7W-7155 [1] HOUSING-CLUTCH  
35. 108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP19890105
 

7N-1292: COVER GP-CYLINDER BLOCK

7N-1292 COVER GP-CYLINDER BLOCK
i00122383 SEBP1989
7N1292 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-0130 [1] COVER  
  4M-6480 [1] GASKET  
2. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
3. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
4. 8L-8662 [1] COVER  
  5S-8055 [1] GASKET  
5. 4B-3938 [1] PLUG-CUP  
6. 2A-3798 [2] DOWEL  
7. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 8M-3267 [1] SCREW-HEX SOCKET (3/8-16X0.75-IN)  
 

#SEBP19890106
 

7N-1342: COVER GP-CYLINDER BLOCK

7N-1342 COVER GP-CYLINDER BLOCK
i00146796 SEBP1989
7N1342 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 B [2] BOLT (3/8-16X0.875-IN)  
2. 5M-2894 B [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 8L-8662 B [1] COVER  
4. 5S-8055 B [1] GASKET  
5. 4B-3938 [1] PLUG-CUP  
6. 2A-3798 [2] DOWEL  
7. 8M-3267 B [1] SCREW-HEX SOCKET (3/8-16X0.75-IN)  
8. 8T-6764 B [1] PLUG-PIPE (1/8-27-THD)  
  B   USE AS REQUIRED
 

#SEBP19890107
 

8N-3163: COVER GP-CYLINDER BLOCK

8N-3163 COVER GP-CYLINDER BLOCK
i00122467 SEBP1989
8N3163 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-8662 [1] COVER  
  5S-8055 [1] GASKET  
2. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 4B-3938 [1] PLUG-CUP  
4. 2A-3798 [2] DOWEL  
5. 8M-3267 [1] SCREW-HEX SOCKET (3/8-16X0.75-IN)  
 

#SEBP19890108
 

117-2952: COVER GP-CYLINDER HEAD

117-2952 COVER GP-CYLINDER HEAD
S/N 64Z20159-UP
i00493095 SEBP1989
1172952 COVER GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
2. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 7C-0273 [1] COVER  
4. 5S-6735 [1] GASKET  
5. 8T-6764 [2] PLUG-PIPE (1/8-27-THD)  
 

#SEBP19890109
 

2P-6530: COVER GP-CYLINDER HEAD

2P-6530 COVER GP-CYLINDER HEAD
i00122027 SEBP1989
2P6530 COVER GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6367 [1] COVER  
  5S-6735 [1] GASKET  
2. 0S-1594 B [4] BOLT (3/8-16X1-IN)  
  5M-2894 B [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
 

Information:

Engine News
New Rear Power Takeoff Clutch Plates Do Not Contain Asbestos
1990/12/01
Special Instruction
Installation Of 5N1678 Rear Power Take-Off Clutch Support Group{1007}
Installation Of 5N1678 Rear Power Take-Off Clutch Support Group{1007}
Service Letter-NACD
Remove All 1K2811 Collar Assemblies Without The "F" Identifier Casted On The Part
Remove All 1K2811 Collar Assemblies Without The "F" Identifier Casted On The Part
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Front Power Take-off Clutch Adapter
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Letter-China
Remove All 1K2811 Collar Assemblies Without The "F" Identifier Casted On The Part
Remove All 1K2811 Collar Assemblies Without The "F" Identifier Casted On The Part
Service Letter-Asia
Service Letter-APD
Service Magazine
New Rear Power Takeoff Clutch Plates Do Not Contain Asbestos{3055,3404}
1990/12/10
Clutch (PTO) Warranty On Morbark Industries Products Powered By Caterpillar Engines{7758}
1992/07/20
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22

Caterpillar Parts SIS Catalog 3306 :

CLUTCH GP
2W-4900 CLUTCH GP
CLUTCH GP
1W-8856 CLUTCH GP
CLUTCH AS
3N-4128 CLUTCH AS
CAMSHAFT GP
1N-4406 CAMSHAFT GP
CAMSHAFT GP
107-7913 CAMSHAFT GP
BELT TIGHTENER GP
5N-7744 BELT TIGHTENER GP
BELT TIGHTENER GP
3N-2755 BELT TIGHTENER GP
AIR COMPRESSOR GP
9N-8069 AIR COMPRESSOR GP
CLUTCH GP
2W-4908 CLUTCH GP
CLUTCH GP
3N-9097 CLUTCH GP
CLUTCH GP
4P-2270 CLUTCH GP
CLUTCH GP
4P-3073 CLUTCH GP
COVER GP-CYLINDER BLOCK
7N-1292 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7N-1342 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
8N-3163 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER HEAD
117-2952 COVER GP-CYLINDER HEAD

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.