2P-6224 SEAL GP-CRANKSHAFT 3306 ENGINE - MACHINE



BASIC ENGINE
CRANKSHAFT GP
SHAFT GP-STUB
MOUNTING GP-ENGINE

ENGINE - MACHINE 3306 ENGINE - MACHINE 64Z
 3306 Industrial Engine 64Z05381-UP SEBP1989 3306 64Z   (2018)

BASIC ENGINE

CRANKSHAFT GP
ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL
CRANKSHAFT AS
334-8389 CRANKSHAFT AS
CRANKSHAFT GP
4P-9856 CRANKSHAFT GP
CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
 

#SEBP19890240
 

2P-6224: SEAL GP-CRANKSHAFT

2P-6224 SEAL GP-CRANKSHAFT
i00122024 SEBP1989
2P6224 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 4W-0452 [1] SEAL GP-CRANKSHAFT (COUNTERCLOCKWISE ROTATION)(REAR)  
2. 362-8853 J [1] SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION)(FRONT)  
    -OR-
  9Y-9895 [1] SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION)(FRONT)  
  J   HEAVY DUTY SEAL THAT IMPROVES AGAINST CONTAMINATION
 

#SEBP19890241
 

109-0858: SHAFT GP-STUB

109-0858 SHAFT GP-STUB
PROVIDES 69.82 MM OD. SHAFT AND 101.6MM LONG KEY, 15.88 MM SQUARE KEY FOR DRIVING A MAX OF 225HP AT 2200 RPM FROM FRONT OF ENGINE
CANNOT BE USED WITH FACTORY INSTALLED RADIATORS OR FAN DRIVES
AN ATTACHMENT
i00488306 SEBP1989
1090858 SHAFT GP-STUB Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 0S-1571 [6] BOLT (3/8-16X1.75-IN)  
2. 1D-2328 [1] KEY-SQUARE  
3. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6L-2681 [1] SHAFT-STUB  
 

#SEBP19890242
 

6L-2692: SHAFT GP-STUB

6L-2692 SHAFT GP-STUB
REAR
AN ATTACHMENT
i00404930 SEBP1989
6L2692 SHAFT GP-STUB Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 6L-2704 [1] SHAFT  
2. 1D-2328 [1] KEY-SQUARE  
3. 0S-2353 [9] BOLT (5/8-18X3.75-IN)  
4. 4D-3704 [9] WASHER-HARD (17X30X5-MM THK)  
 

#SEBP19890243
 

110-6266: SUPPORT GP-ENGINE

110-6266 SUPPORT GP-ENGINE
REQUIRES SAE #1 FLYWHEEL HOUSING
AN ATTACHMENT
i00471234 SEBP1989
1106266 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 0S-1592 [4] BOLT (5/8-11X1.25-IN)  
2. 110-6267 [2] SUPPORT AS-REAR  
3. 0S-1566 [4] BOLT (5/8-11X1.5-IN)  
 

#SEBP19890244
 

116-7596: SUPPORT GP-ENGINE

116-7596 SUPPORT GP-ENGINE
S/N 64Z34982-UP
FRONT
i00489174 SEBP1989
1167596 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
2. 0T-0573 [3] BOLT (3/8-16X2.75-IN)  
3. 116-7595 [1] SUPPORT AS-ENGINE  
  1P-2841 [1] SPACER (0.531X1X0.69-IN THK)  
4. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 9X-8874 [4] BOLT (1/2-13X3-IN)  
6. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
7. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
8. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
9. 0S-1619 [1] BOLT (3/8-16X3-IN)  
 

#SEBP19890245
 

1W-5122: SUPPORT GP-ENGINE

1W-5122 SUPPORT GP-ENGINE
REAR
AN ATTACHMENT
i00352211 SEBP1989
1W5122 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 0S-1592 [4] BOLT (5/8-11X1.25-IN)  
2. 1W-5123 [2] SUPPORT AS-REAR  
3. 0S-1566 [4] BOLT (5/8-11X1.5-IN)  
 

#SEBP19890246
 

1W-6332: SUPPORT GP-ENGINE

1W-6332 SUPPORT GP-ENGINE
REAR
FOR USE WITH NO. 2 FLYWHEEL HOUSING
AN ATTACHMENT
i00352772 SEBP1989
1W6332 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 0S-1585 [8] BOLT (1/2-13X1.5-IN)  
  5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 1W-6334 [1] SUPPORT AS-REAR  
3. 1W-6333 [1] SUPPORT AS-REAR  
 

#SEBP19890247
 

3N-2883: SUPPORT GP-ENGINE

3N-2883 SUPPORT GP-ENGINE
FOR USE WITH RADIATOR & MOBILE EQUIPMENT AR
ALSO AN ATTACHMENT
i00366119 SEBP1989
3N2883 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 2H-5330 C [3] BOLT (3/8-16X2.88-IN)  
2. 0L-1329 [2] BOLT (1/2-13X3-IN)  
  2M-0849 C [2] WASHER-HARD (13.5X25.5X5-MM THK)  
3. 3N-1877 [1] SUPPORT AS  
4. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
5. 0S-1594 C [2] BOLT (3/8-16X1-IN)  
6. 5M-2894 C [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19890248
 

3N-6695: SUPPORT GP-ENGINE

3N-6695 SUPPORT GP-ENGINE -FRONT
FOR USE WITH STANDARD INDUSTRIAL TYPE SUPPORT
CANNOT BE USED WITH RADIATOR
AN ATTACHMENT
i00366606 SEBP1989
3N6695 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 4B-4043 [4] BOLT (5/8-11X1.375-IN)  
    -OR-
  7S-9372 C [4] BOLT (5/8-11X1.125-IN)  
2. 4L-7893 BC [2] SHIM (0.598-IN THK)  
3. 1N-5526 [2] SUPPORT AS  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19890249
 

7N-0744: SUPPORT GP-ENGINE

7N-0744 SUPPORT GP-ENGINE
SINGLE MOUNTING POINT FRONT SUPPORT
FOR USE WITH @@@@@ 7N-8143@@@@@
ALSO AN ATTACHMENT
i00407871 SEBP1989
7N0744 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 0T-0573 C [4] BOLT (3/8-16X2.75-IN)  
2. 5M-2894 C [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 7N-6059 [1] SUPPORT AS  
4. 0L-1329 [2] BOLT (1/2-13X3-IN)  
  2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
5. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
6. 1A-2029 C [2] BOLT (3/8-16X1.125-IN)  
7. 0L-2070 C [1] BOLT (3/8-16X2.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed
1979/06/06
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
New Crankshaft Assemblies
1982/11/10
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
New Rear Crankshaft Seal Group Used
1984/07/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
New Front Crankshaft Seal Used{1160,1202}
1991/03/01
A New Type of Main Bearing is Available {1203}
2006/01/02
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1202}
2008/09/15
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Rear Crankshaft Gear And Accessory Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Hub And Damper
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Vibration Damper & Pulley (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3304B & 3306B MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Crankshaft Pulley (3304)
3304B & 3306B MARINE ENGINES
Crankshaft
3304B & 3306B MARINE ENGINES
Crankshaft Rear Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
New Rear Crankshaft Seal Group Used {1161}
1984/06/25
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
A New Type of Main Bearing is Available {1203}
2005/12/26
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 3306 :

PULLEY GP-FAN DRIVE
8N-2252 PULLEY GP-FAN DRIVE
PULLEY GP-FAN DRIVE
8N-2111 PULLEY GP-FAN DRIVE
PULLEY GP-FAN DRIVE
6N-6703 PULLEY GP-FAN DRIVE
PULLEY GP-FAN DRIVE
3N-7211 PULLEY GP-FAN DRIVE
PULLEY GP-FAN DRIVE
3N-5627 PULLEY GP-FAN DRIVE
PULLEY GP-FAN DRIVE
3N-5626 PULLEY GP-FAN DRIVE
PULLEY GP-CRANKSHAFT
3N-6128 PULLEY GP-CRANKSHAFT
PULLEY GP-CRANKSHAFT
3N-5618 PULLEY GP-CRANKSHAFT
SHAFT GP-STUB
109-0858 SHAFT GP-STUB
SHAFT GP-STUB
6L-2692 SHAFT GP-STUB
SUPPORT GP-ENGINE
110-6266 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
116-7596 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
1W-5122 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
1W-6332 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
3N-2883 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
3N-6695 SUPPORT GP-ENGINE

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC