AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

393-1165 KIT-TURBOCHARGER GASKET -TURBOCHARGER KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TUROBS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE FOR USE WITH @@@@@130-2237@@@@@, @@@@@130-2239@@@@@, @@@@@130-2241@@@@@, @@@@@131-2992@@@@@ FIELD INSTALLATION 3306


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LINES GP-AIR

ENGINE - MACHINE 3306 ENGINE - MACHINE 64Z
 3306 Industrial Engine 64Z05381-UP SEBP1989 3306 64Z   (2018)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
7N-7750 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
7W-8841 CARTRIDGE GP-TURBOCHARGER
393-1165 KIT-TURBOCHARGER GASKET
393-1181 KIT-TURBOCHARGER GASKET
482-7056 KIT-TURBOCHARGER GASKET
7E-7690 MOUNTING GP-TURBOCHARGER
 

#SEBP19890590
 

393-1165: KIT-TURBOCHARGER GASKET

393-1165 KIT-TURBOCHARGER GASKET -TURBOCHARGER
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TUROBS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE
FOR USE WITH @@@@@130-2237@@@@@, @@@@@130-2239@@@@@, @@@@@130-2241@@@@@, @@@@@131-2992@@@@@
FIELD INSTALLATION
i04902434 SEBP1989
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1S-4295 [1] GASKET (TURBOCHARGER)  
  8H-9788 [1] GASKET  
  188-6126 [1] GASKET  
  1S-4810 [1] GASKET-OIL DRAIN  
  1S-6595 [1] GASKET-OIL SUPPLY  
  391-2167 [4] LOCKNUT-FLANGE (3/8X16-THD)  
  2M-9780 [1] SEAL-O-RING  
  4L-8337 [2] SEAL-O-RING  
  5H-7704 [2] SEAL-O-RING  
  9M-4849 [1] SEAL-O-RING  
  3K-0360 [2] SEAL-O-RING  
  8M-5253 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP19890591
 

393-1181: KIT-TURBOCHARGER GASKET

393-1181 KIT-TURBOCHARGER GASKET
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE
FIELD INSTALLATION
i05948395 SEBP1989
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8M-2295 [4] BOLT (3/8-16X1.625-IN)  
  1H-7666 [1] GASKET  
  1P-0451 [1] GASKET  
  4M-6480 [1] GASKET  
  8H-9788 [1] GASKET  
  188-6126 [1] GASKET  
  5S-6735 [1] GASKET  
  9S-7083 [1] GASKET-INLET  
  2N-2766 [4] LOCKNUT (3/8-16-THD)  
  6N-0009 [1] RING-METAL SEAL  
  6N-0992 [1] RING-METAL SEAL  
  2M-9780 [1] SEAL-O-RING  
  3J-1907 [1] SEAL-O-RING  
  3K-0360 [2] SEAL-O-RING  
  5H-7704 [2] SEAL-O-RING  
  9M-4849 [1] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP19890592
 

482-7056: KIT-TURBOCHARGER GASKET

482-7056 KIT-TURBOCHARGER GASKET
TURBOCHARGER GASKET KIT
FIELD INSTALLATION
i06673909 SEBP1989
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7L-3195 [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
  1S-4295 [1] GASKET (TURBOCHARGER)  
  1S-4810 [1] GASKET-OIL DRAIN  
  1S-6595 [1] GASKET-OIL SUPPLY  
  391-2167 [4] LOCKNUT-FLANGE (3/8X16-THD)  
  4L-8337 [4] SEAL-O-RING  
  9M-4849 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP19890593
 

101-7646: LINES GP-AIR

101-7646 LINES GP-AIR
FOR USE WITH SAE NO. 2 FLYWHEEL HOUSING
AN ATTACHMENT
i00463879 SEBP1989
1017646 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-9195 [1] PIPE AS  
  5M-6214 [1] PLUG (1/8-27 PTF)  
  7M-1674 [1] SCREEN-AIR CLEANER INLET (AIR LINES)  
  9M-2151 [8] STUD-TAPERLOCK (3/8-16X1.378-IN)  
2. 5H-7704 [2] SEAL-O-RING  
3. 101-7642 [1] BRACKET AS  
4. 7X-0345 [2] BOLT (5/8-11X1.75-IN)  
5. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
6. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
7. 6V-8801 [2] NUT (3/8-16-THD)  
8. 5P-1075 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
9. 7X-0295 [1] BOLT (3/8-16X5.25-IN)  
 

#SEBP19890594
 

132-5398: LINES GP-AIR

132-5398 LINES GP-AIR
S/N 64Z20134-UP
i00496430 SEBP1989
1325398 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-2790 [4] BOLT (5/16-18X1.375-IN)  
2. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
3. 6L-9691 [1] GASKET-FLANGE  
4. 4N-9579 [1] PIPE-AIR TRANSFER  
5. 6L-3052 [1] PIPE-AIR TRANSFER  
6. 8T-6757 [1] PLUG-PIPE  
7. 1W-2127 [1] TUBE AS-CONTROL  
8. 2B-2404 [2] CLIP  
9. 2H-3755 [2] BOLT (5/16-18X0.43-IN)  
10. 5P-4479 [1] ELBOW (FLARED-LONG)  
11. 3J-7352 [1] CONNECTOR  
12. 3J-7354 [1] SEAL-O-RING  
13. 7M-8322 [1] CLIP  
14. 4L-8337 [4] SEAL-O-RING  
 

#SEBP19890595
 

135-6467: LINES GP-AIR

135-6467 LINES GP-AIR
FOR USE WITH S3 TURBOCHARGER
AN ATTACHMENT
i00498957 SEBP1989
1356467 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-6466 [1] COUPLING  
2. 6N-0009 [1] RING-METAL SEAL  
3. 8N-5740 [1] SUPPORT-ELBOW  
4. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
5. 1B-5355 [2] NUT-FULL (3/8-16-THD)  
6. 5L-8854 [1] RING-SEALING  
 

#SEBP19890596
 

147-6764: LINES GP-AIR

147-6764 LINES GP-AIR
S/N 64Z27429-UP
REQUIRES: SAE NO.1 FLYWHEEL HOUSING
FOR USE WITH UNDERGROUND MINING ENGINE
i00600909 SEBP1989
1476764 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-0273 [1] COVER  
2. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
3. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 5S-6735 [2] GASKET  
5. 0S-1588 [8] BOLT (3/8-16X1.25-IN)  
6. 7C-8299 [1] ELBOW  
7. 8T-6765 [1] PLUG-PIPE (1/4-18-THD)  
8. 3J-7354 [1] SEAL-O-RING  
9. 2N-1287 [1] ELBOW-FLARED  
10. 110-4903 [1] TUBE AS  
11. 2H-3755 [2] BOLT (5/16-18X0.43-IN)  
12. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
13. 2B-2404 [2] CLIP  
14. 3J-7352 [1] CONNECTOR  
 

#SEBP19890597
 

169-4202: LINES GP-AIR

169-4202 LINES GP-AIR
S/N 64Z29536-UP
i04985350 SEBP1989
1694202 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-7632 [1] SUPPORT-ELBOW  
2. 2N-2766 [2] LOCKNUT (3/8-16-THD)  
3. 8M-2295 [2] BOLT (3/8-16X1.625-IN)  
4. 5L-8854 [1] RING-SEALING  
5. 5L-8855 [1] RING-METAL SEAL  
6. 369-9487 [1] COUPLING-EXHAUST  
 

#SEBP19890598
 

1W-2486: LINES GP-AIR

1W-2486 LINES GP-AIR
S/N 64Z29536-UP
FOR USE WITH REAR FACING EXHAUST TURBOCHARGER
ALSO AN ATTACHMENT
i00355972 SEBP1989
1W2486 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-8337 [2] SEAL-O-RING  
2. 4W-2539 C [1] PIPE-AIR TRANSFER  
3. 5H-7704 [2] SEAL-O-RING  
4. 2N-1287 [1] ELBOW-FLARED  
5. 7M-8322 [1] CLIP  
6. 1W-2127 [1] TUBE AS-CONTROL  
7. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
8. 2B-2404 [1] CLIP  
9. 3J-7352 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
10. 2H-3755 C [1] BOLT (5/16-18X0.43-IN)  
  9M-1974 C [1] WASHER-HARD (8.8X16X2-MM THK)  
  2B-2404 C [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19890599
 

1W-3925: LINES GP-AIR

1W-3925 LINES GP-AIR
S/N 64Z5381-36766
i00356527 SEBP1989
1W3925 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-8337 [2] SEAL-O-RING  
2. 0L-1351 C [1] BOLT (3/8-16X0.875-IN)  
  7W-1944 C [1] RETAINER  
3. 4N-8582 [1] PIPE-AIR TRANSFER  
4. 7W-1945 C [1] RETAINER  
5. 5H-7704 [2] SEAL-O-RING  
6. 5L-8855 [1] RING-METAL SEAL  
7. 6N-5978 [1] COUPLING-EXHAUST  
8. 5L-8854 [1] RING-SEALING  
9. 3N-5869 [1] SUPPORT-ELBOW  
10. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
  1B-5355 [2] NUT-FULL (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Installation Instructions For Turbocharger Bearing Kit
1984/08/08
Remanufactured Turbocharger Groups
1984/12/12
New Air Pipe Retainers Used To Connect Turbocharger To Aftercooler
1985/01/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Remanufactured Turbocharger Groups And Cartridges
1987/08/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
"Off-Size" Bearing Kits Available
1991/10/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Add Chamfer To Cartridge Assembly Bearings To Prevent Oil Leakage
1977/12/14
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W722 Turbocharger Cartridge Repair Kit{1053}
2W722 Turbocharger Cartridge Repair Kit{1053}
2W725 Turbocharger Cartridge Repair Kit{1053}
2W725 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbochargers
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbocharger
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Turbocharger (AiResearch T04)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Turbocharger (Schwitzer 3LM)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Turbocharger (AiResearch TW61)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Turbocharger
3304B & 3306B MARINE ENGINES
Turbocharger (AiResearch T04 or TW4)
3304B & 3306B MARINE ENGINES
Turbocharger (AiResearch TW61)
3304B & 3306B MARINE ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11
Installation Instructions For Turbocharger Bearing Kit{1052,1053}
1984/07/16
New Air Pipe Retainers Used To Connect Turbocharger To Aftercooler{1052,1063}
1984/12/10
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Add Chamfer To Cartridge Assembly Bearings To Prevent Oil Leakage{1052,1053}
1977/11/21
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Remanufactured Turbocharger Groups And Cartridges{1052,1053}
1987/08/10
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/09
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3306 :

6I-3832 KIT-AIR CLEANER
6I-3830 KIT-AIR CLEANER
6I-3828 KIT-AIR CLEANER
HOUSING GP-AFTERCOOLER
160-6740 HOUSING GP-AFTERCOOLER
GAUGE GP-AIR CLEANER
2N-3322 GAUGE GP-AIR CLEANER
FLANGE GP-EXHAUST
8N-9486 FLANGE GP-EXHAUST
FLANGE GP-EXHAUST
2W-7860 FLANGE GP-EXHAUST
FLANGE GP-EXHAUST
2W-7857 FLANGE GP-EXHAUST
393-1181 KIT-TURBOCHARGER GASKET
482-7056 KIT-TURBOCHARGER GASKET
LINES GP-AIR
101-7646 LINES GP-AIR
LINES GP-AIR
132-5398 LINES GP-AIR
LINES GP-AIR
135-6467 LINES GP-AIR
LINES GP-AIR
147-6764 LINES GP-AIR
LINES GP-AIR
169-4202 LINES GP-AIR
LINES GP-AIR
1W-2486 LINES GP-AIR

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.