7W-5928 PUMP GP-FUEL INJECTION PART OF 6I-2831 PUMP GP-FUEL INJECTION, 7W-5932 PUMP GP-GOV & FUEL INJ OPTIONAL FIELD REPLACEMENT ORDER 432-8277 PUMP GP-FUEL INJECTION 3306



FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
FILTER GP-FUEL

ENGINE - MACHINE 3306 ENGINE - MACHINE 64Z
 3306 Industrial Engine 64Z05381-UP SEBP1989 3306 64Z   (2018)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2834 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2837 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-5928 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
110-6625 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
110-6625 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
119-3842 PUMP GP-GOV & FUEL INJ
 

#SEBP19890830
 

7W-5928: PUMP GP-FUEL INJECTION

7W-5928 PUMP GP-FUEL INJECTION
PART OF 6I-2831 PUMP GP-FUEL INJECTION, 7W-5932 PUMP GP-GOV & FUEL INJ
OPTIONAL FIELD REPLACEMENT ORDER 432-8277 PUMP GP-FUEL INJECTION
i00122409 SEBP1989
7W5928 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 7W-1927 [1] RING-RETAINING  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-9171 [1] BONNET-VALVE  
4. 1W-6987 [1] VALVE AS-CHECK (FUEL INJECTION PUMP)  
5. 7W-5929 [1] PLUNGER & BARREL AS (FUEL PUMP)  
6. 7C-5278 C [1] BOLT-PLUNGER GEAR (FUEL PUMP)  
7. 7N-1066 C [1] WASHER-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP19890831
 

184-1641: PUMP GP-FUEL PRIMING

184-1641 PUMP GP-FUEL PRIMING
AN ATTACHMENT
i01233263 SEBP1989
1841641 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 7W-8834 [1] BASE-FUEL PRIMING PUMP  
2. 105-2508 [1] PUMP AS-FUEL PRIMING  
3. 1P-0436 [2] GASKET (FUEL PRIMING PUMP)  
4. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
5. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
7. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
8. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
9. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 8N-3573 [1] COVER  
11. 4F-7957 [1] BOLT (1/4-20X0.875-IN)  
12. 0S-1618 [1] BOLT (5/16-18X1-IN)  
 

#SEBP19890832
 

4W-1876: PUMP GP-FUEL PRIMING

4W-1876 PUMP GP-FUEL PRIMING
i00378280 SEBP1989
4W1876 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 7W-8834 C [1] BASE-FUEL PRIMING PUMP  
2. 137-5541 [1] PUMP GP-FUEL PRIMING (HAND)  
3. 1P-0436 [2] GASKET (FUEL PRIMING PUMP)  
4. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
5. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 0T-0055 [1] BOLT (3/8-16X4.25-IN)  
7. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
8. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
9. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
10. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
11. 030-8194 [1] CONNECTOR  
12. 2M-9780 [1] SEAL-O-RING  
13. 0S-1618 [1] BOLT (5/16-18X1-IN)  
14. 4F-7957 [1] BOLT (1/4-20X0.875-IN)  
15. 8N-3573 [1] COVER  
16. 1P-1669 [1] PLUG-SEAL  
17. 1W-6629 [1] TUBE AS-FUEL FILTER  
18. 3K-0360 [1] SEAL-O-RING  
19. 030-7947 [1] ADAPTER-ELBOW  
20. 3J-1907 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19890833
 

8N-3365: PUMP GP-FUEL PRIMING

8N-3365 PUMP GP-FUEL PRIMING
PART OF 8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
ALSO AN ATTACHMENT
i00157299 SEBP1989
8N3365 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 1W-6350 [1] BASE AS-FUEL FILTER  
1A. 8N-0803 [1] BASE-FILTER  
1B. 7E-5346 [1] VALVE AS (FUEL CHECK)  
1C. 9S-8003 [2] PLUG (1/2-20-THD)  
1D. 1J-9671 [2] SEAL-O-RING  
2. 105-2508 [1] PUMP AS-FUEL PRIMING  
3. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
 

#SEBP19890834
 

8N-6200: PUMP GP-FUEL PRIMING

8N-6200 PUMP GP-FUEL PRIMING
PART OF 8N-6201 PUMP GP-FUEL PRM & PRIM FILTER
ALSO AN ATTACHMENT
i00122473 SEBP1989
8N6200 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 137-5541 [1] PUMP GP-FUEL PRIMING  
2. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
3. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
4. 2W-6688 [1] BASE AS-FUEL FILTER  
  8N-6199 [1] BASE-PUMP & FILTER  
4A. 7E-5346 [1] VALVE AS (FUEL FILTER BASE CHECK)  
5. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
6. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
7. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
 

#SEBP19890835
 

122-2513: PUMP GP-FUEL PRM & PRIM FILTER

122-2513 PUMP GP-FUEL PRM & PRIM FILTER
FOR USE WITH @@@@@184-1642@@@@@
AN ATTACHMENT
i00090256 SEBP1989
1222513 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 128-8557 [1] BASE AS-FILTER (PRIMARY FUEL FILTER)  
  7E-5346 [1] VALVE AS (FUEL CHECK)  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
2. 129-0372 J [1] FILTER AS-WATER SEP & FUEL  
  513-4490 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
  129-0375 [1] BOWL AS-WATER COLLECTION  
3. 105-2508 [1] PUMP AS-FUEL PRIMING  
4. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
5. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
6. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
8. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
9. 9S-8002 [4] PLUG (7/16-20-THD)  
10. 6V-5048 [4] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  141-0284 J [1] KIT-SEAL (FUEL FILTER, WATER SEPARATOR)  
    (INCLUDES SEAL & GASKET)
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP19890836
 

1W-5374: PUMP GP-FUEL PRM & PRIM FILTER

1W-5374 PUMP GP-FUEL PRM & PRIM FILTER
ALSO AN ATTACHMENT
i00121985 SEBP1989
1W5374 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 0T-0055 [1] BOLT (3/8-16X4.25-IN)  
2. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 030-8194 [1] CONNECTOR  
  2M-9780 [1] SEAL-O-RING  
5. 8N-6201 Y [1] PUMP GP-FUEL PRM & PRIM FILTER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19890837
 

4W-1241: PUMP GP-FUEL PRM & PRIM FILTER

4W-1241 PUMP GP-FUEL PRM & PRIM FILTER
PROVIDES FRONT MOUNTED PRIMING PUMP AND PRIMARY FUEL FILTER
FOR USE WITH @@@@@ 4W-1250@@@@@
AN ATTACHMENT
i00378613 SEBP1989
4W1241 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 4W-1242 [1] BRACKET AS  
2. 0L-1143 [2] BOLT (3/8-16X2.5-IN)  
3. 1D-4717 [4] NUT (3/8-16-THD)  
4. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 8N-5251 Y [1] PUMP GP-FUEL PRM & PRIM FILTER  
6. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
7. 5P-1404 [1] ADAPTER  
8. 2M-9780 [1] SEAL-O-RING  
9. 030-7947 [1] ADAPTER-ELBOW  
10. 3J-1907 [1] SEAL-O-RING  
11. 030-7948 [1] ELBOW  
12. 3K-0360 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP19890838
 

8N-1180: PUMP GP-FUEL PRM & PRIM FILTER

8N-1180 PUMP GP-FUEL PRM & PRIM FILTER
S/N 64Z29536-UP
45 DEGREE
FOR USE WITH @@@@@ 4W-1876@@@@@
CANNOT BE USED WITH @@@@@ 4N-4599@@@@@, @@@@@ 4N-4600@@@@@, @@@@@ 4N-4601@@@@@, @@@@@ 3N-7741@@@@@
ALSO AN ATTACHMENT
i00157296 SEBP1989
8N1180 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 8S-9191 B [1] BOLT (3/8-16X4-IN)  
    -OR-
  0T-0055 B [1] BOLT (3/8-16X4.25-IN)  
2. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 8N-5251 Y [1] PUMP GP-FUEL PRM & PRIM FILTER  
4. 030-8194 B [1] CONNECTOR  
  2M-9780 B [1] SEAL-O-RING  
5. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP19890839
 

8N-5251: PUMP GP-FUEL PRM & PRIM FILTER

8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
PART OF 4W-1241, 8N-1180 PUMP GP-FUEL PRM & PRIM FILTER
ALSO AN ATTACHMENT
i00157301 SEBP1989
8N5251 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 8N-3365 Y [1] PUMP GP-FUEL PRIMING  
2. 8H-2807 [1] NUT (3/8-24-THD)  
3. 2J-0157 [1] SEAL-O-RING  
4. 1L-3769 [1] RING-RETAINING  
5. 8H-2778 [1] SEAL-RING (FUEL PRIMING PUMP)  
6. 7H-9678 [1] RETAINER-ELEMENT  
7. 7S-9323 [1] SPRING  
8. 2H-3429 [1] RING-RETAINING  
9. 8H-2810 [1] CASE AS-FILTER  
10. 9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)(PRIMARY)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
New Fuel Injection Nozzle Assembly Used
1980/01/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Explanation Of Differences In Timing Advance Information
1981/08/26
New Broken Link Spring Used In Governor
1982/05/12
Change Made To Fuel Nozzle Assembly; New Bleed Screw Used
1982/08/25
New Torque Specification For Fuel Injection Pump Bushing
1982/09/22
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Governor Drive Gears And Weight Assemblies
1983/09/14
Remanufactured Fuel Pump And Governor Groups
1983/10/26
Service Information For Woodward Governors
1983/10/26
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Fuel Transfer Pump Improved
1985/11/01
Bolt Removed From Governor And Fuel Injection Pump Group
1985/12/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Seals In Variable Timing Advance Available For Parts Service
1988/08/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Governor Control Motor Polarity May Require A Change
1990/11/01
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly
1991/04/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Manufacturing And Design Improvements Incorporated Into Fuel Injection Nozzle Assemblies{1252,1307}
1997/07/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2009/04/20
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {0782, 1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Cat® Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Engines {1251, 1278}
2014/09/05
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines<BR>
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Control
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Nozzles
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing &amp; Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assembly &amp; Push Rods
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3304B & 3306B MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304B & 3306B MARINE ENGINES
Governor
3304B & 3306B MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly And Push Rods
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly
3304B & 3306B MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08
New Broken Link Spring Used In Governor{1264}
1982/04/19
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Change Made To Fuel Nozzle Assembly; New Bleed Screw Used{1254}
1982/07/19
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Fuel Ratio Control Group Has Improved Diaphragm{1278,1257,1251}
1983/08/15
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Remanufactured Fuel Pump And Governor Groups{1251,1264}
1983/10/17
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Higher Torque Can Be Used With 6V6980 Nozzle Puller Group{0706,1254}
1985/06/10
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Seals In Variable Timing Advance Available For Parts Service{1272}
1988/07/11
Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}
1988/12/19
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/04/15
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Improved Fuel Injection Line Assemblies And Clamps Used{1252}
1992/11/09
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 3306 :

PUMP GP-FUEL INJECTION
6I-2837 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2834 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2833 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2831 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-9827 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-6179 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0256 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0256 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
184-1641 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4W-1876 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
8N-3365 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
8N-6200 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRM & PRIM FILTER
122-2513 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
1W-5374 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
4W-1241 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
8N-1180 PUMP GP-FUEL PRM & PRIM FILTER

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC