AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

131-2652 PUMP GP-GOV & FUEL INJ S/N 64Z18487-UP 3306 ENGINE - MACHINE


FUEL SYSTEM
GOVERNOR GP

ENGINE - MACHINE 3306 ENGINE - MACHINE 64Z
 3306 Industrial Engine 64Z05381-UP SEBP1989 3306 64Z   (2018)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
131-2650 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
131-2651 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
131-2652 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
146-8502 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1W-6905 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1W-6905 PUMP GP-GOV & FUEL INJ
 

#SEBP19890850
 

131-2652: PUMP GP-GOV & FUEL INJ

131-2652 PUMP GP-GOV & FUEL INJ
S/N 64Z18487-UP
i00508294 SEBP1989
1312652 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-9296 Y [1] PUMP GP-FUEL INJECTION  
2. 8L-9790 [1] SPRING  
3. 7N-1052 [1] DOWEL  
4. 7N-2176 [1] PIN-DETENT  
5. 2W-9657 [1] SPRING-DETENT  
6. 8N-5403 [1] SHAFT AS-THROTTLE  
7. 4W-5735 [1] LEVER AS-PIVOT  
8. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
9. 8L-5832 [1] NUT-HEX (10-32-THD)  
10. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
12. 8N-6680 [1] SCREEN AS (GOV & FUEL INJ PUMP)  
13. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
14. 8N-7276 Y [1] TORQUE CONTROL GP  
15. 2W-2410 Y [1] GOVERNOR GP  
16. 2W-5448 [1] COVER  
17. 8N-5784 [1] DEFLECTOR-PULSE  
18. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
19. 4B-2049 [1] NUT (10-32-THD)  
20. 7N-9907 [1] COVER  
21. 111-5162 Y [1] CONTROL GP-FUEL RATIO  
22. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
23. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
24. 2D-6392 [1] SEAL-O-RING  
25. 3J-1907 [1] SEAL-O-RING  
26. 144-0477 [1] GASKET  
27. 5P-6620 [1] SEAL-O-RING  
28. 150-3726 [1] GASKET  
29. 8J-8343 [1] SEAL-O-RING  
30. 150-3727 [1] GASKET-FUEL  
31. 8M-8515 [1] SEAL-O-RING  
32. 033-5879 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19890851
 

146-8502: PUMP GP-GOV & FUEL INJ

146-8502 PUMP GP-GOV & FUEL INJ
S/N 64Z23105-UP
i00625356 SEBP1989
1468502 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-5088 Y [1] PUMP GP-FUEL INJECTION  
2. 2N-2878 [1] SPRING  
3. 7N-1052 [1] DOWEL  
4. 7N-2176 [1] PIN-DETENT  
5. 8N-3096 [1] SPRING-DETENT  
6. 8N-5403 [1] SHAFT AS-THROTTLE  
7. 4W-5735 [1] LEVER AS-PIVOT  
  8L-5832 [1] NUT-HEX (10-32-THD)  
  115-1249 [1] SETSCREW-SOCKET  
8. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
9. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
10. 1W-8668 Y [1] TORQUE CONTROL GP  
11. 2W-2410 Y [1] GOVERNOR GP  
12. 2W-5448 [1] COVER  
13. 8N-5784 [1] DEFLECTOR-PULSE  
14. 5H-6552 SETSCREW-SOCKET (10-32X1.25-IN)  
15. 8L-5832 [1] NUT-HEX (10-32-THD)  
16. 7N-9907 [1] COVER  
17. 119-3843 Y [1] CONTROL GP-FUEL RATIO  
18. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
19. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 2D-6392 [1] SEAL-O-RING  
21. 8N-6680 [1] SCREEN AS (GOV & FUEL INJ PUMP)  
22. 3J-1907 [1] SEAL-O-RING  
23. 5P-6620 [1] SEAL-O-RING  
24. 150-3726 [1] GASKET  
25. 150-3727 [1] GASKET-FUEL  
26. 8J-8343 [1] SEAL-O-RING  
27. 8M-8515 [1] SEAL-O-RING  
28. 033-5879 [1] SEAL-O-RING  
29. 144-0477 [1] GASKET  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19890852
 

1W-6905: PUMP GP-GOV & FUEL INJ

1W-6905 PUMP GP-GOV & FUEL INJ
Type 1
i00353054 SEBP1989
1W6905 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
2. 033-5879 [1] SEAL-O-RING  
3. 8J-8343 [1] SEAL-O-RING  
4. 7N-5334 [1] SETSCREW-SOCKET (25.4-MM LG)  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
8. 8L-5832 C [1] NUT-HEX (10-32-THD)  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 C [1] NUT-HEX (10-32-THD)  
10. 2W-2410 Y [1] GOVERNOR GP  
11. 7N-8768 [1] GASKET  
12. 3J-1907 [1] SEAL-O-RING  
13. 2W-0256 Y [1] PUMP GP-FUEL INJECTION  
14. 0S-1616 C [2] BOLT (1/4-20X1-IN)  
15. 7C-8993 CY [1] FASTENER GP-FUEL INJ PUMP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 8N-3093 [1] SPRING-DETENT  
19. 8N-7276 Y [1] TORQUE CONTROL GP  
20. 8N-5784 C [1] DEFLECTOR-PULSE  
21. 8N-9594 [1] SPRING  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
23. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
24. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
25. 8M-8515 [1] SEAL-O-RING  
26. 5P-6620 [1] SEAL-O-RING  
27. 8L-5832 C [1] NUT-HEX (10-32-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19890853
 

1W-6905: PUMP GP-GOV & FUEL INJ

1W-6905 PUMP GP-GOV & FUEL INJ
Type 2
i00353055 SEBP1989
1W6905 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG  
2. 033-5879 [1] SEAL-O-RING  
3. 8J-8343 [1] SEAL-O-RING  
4. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
8. 8L-5832 C [1] NUT-HEX (10-32-THD)  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 C [1] NUT-HEX (10-32-THD)  
10. 2W-2410 Y [1] GOVERNOR GP  
11. 150-3726 [1] GASKET  
12. 3J-1907 [1] SEAL-O-RING  
13. 6I-2834 Y [1] PUMP GP-FUEL INJECTION  
14. 0S-1616 C [2] BOLT (1/4-20X1-IN)  
15. 7C-8993 CY [1] FASTENER GP-FUEL INJ PUMP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 8N-3093 [1] SPRING-DETENT  
19. 8N-7276 Y [1] TORQUE CONTROL GP  
20. 8N-5784 C [1] DEFLECTOR-PULSE  
21. 8N-9594 [1] SPRING  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
23. 2W-5448 [1] COVER  
  144-0477 [1] GASKET  
24. 7N-9907 [1] COVER  
  150-3727 [1] GASKET-FUEL  
25. 8M-8515 [1] SEAL-O-RING  
26. 5P-6620 [1] SEAL-O-RING  
27. 8L-5832 C [1] NUT-HEX (10-32-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19890854
 

2W-0057: PUMP GP-GOV & FUEL INJ

2W-0057 PUMP GP-GOV & FUEL INJ
Type 1
i00360612 SEBP1989
2W0057 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
2. 033-5879 [1] SEAL-O-RING  
3. 8J-8343 [1] SEAL-O-RING  
4. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
8. 8L-5832 C [1] NUT-HEX (10-32-THD)  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 C [1] NUT-HEX (10-32-THD)  
10. 2W-6559 Y [1] GOVERNOR GP  
11. 7N-8768 [1] GASKET  
12. 3J-1907 [1] SEAL-O-RING  
13. 2W-6179 Y [1] PUMP GP-FUEL INJECTION  
14. 0S-1616 C [2] BOLT (1/4-20X1-IN)  
15. 7C-8993 CY [1] FASTENER GP-FUEL INJ PUMP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 8N-3093 [1] SPRING-DETENT  
19. 8N-7276 Y [1] TORQUE CONTROL GP  
20. 8N-5784 C [1] DEFLECTOR-PULSE  
21. 8M-9141 [1] SPRING  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
23. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
24. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
25. 8M-8515 [1] SEAL-O-RING  
26. 5P-6620 [1] SEAL-O-RING  
27. 8L-5832 C [1] NUT-HEX (10-32-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19890855
 

2W-0057: PUMP GP-GOV & FUEL INJ

2W-0057 PUMP GP-GOV & FUEL INJ
Type 2
i00360614 SEBP1989
2W0057 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG  
2. 033-5879 [1] SEAL-O-RING  
3. 8J-8343 [1] SEAL-O-RING  
4. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
8. 8L-5832 [1] NUT-HEX (10-32-THD)  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
10. 2W-6559 Y [1] GOVERNOR GP  
11. 150-3726 [1] GASKET  
12. 3J-1907 [1] SEAL-O-RING  
13. 6I-2837 CY [1] PUMP GP-FUEL INJECTION  
14. 0S-1616 [2] BOLT (1/4-20X1-IN)  
15. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 8N-3093 [1] SPRING-DETENT  
19. 8N-7276 Y [1] TORQUE CONTROL GP  
20. 8N-5784 [1] DEFLECTOR-PULSE  
21. 8M-9141 [1] SPRING  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
23. 2W-5448 [1] COVER  
  144-0477 [1] GASKET  
24. 7N-9907 [1] COVER  
  150-3727 [1] GASKET-FUEL  
25. 8M-8515 [1] SEAL-O-RING  
26. 5P-6620 [1] SEAL-O-RING  
27. 8L-5832 [1] NUT-HEX (10-32-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19890856
 

2W-1078: PUMP GP-GOV & FUEL INJ

2W-1078 PUMP GP-GOV & FUEL INJ
Type 1
i00357803 SEBP1989
2W1078 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
2. 033-5879 [1] SEAL-O-RING  
3. 8J-8343 [1] SEAL-O-RING  
4. 7N-5334 [1] SETSCREW-SOCKET (25.4-MM LG)  
    -OR-
  5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
8. 8L-5832 C [1] NUT-HEX (10-32-THD)  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 C [1] NUT-HEX (10-32-THD)  
10. 2W-2410 Y [1] GOVERNOR GP  
11. 7N-8768 [1] GASKET  
12. 3J-1907 [1] SEAL-O-RING  
13. 2W-0256 Y [1] PUMP GP-FUEL INJECTION  
14. 0S-1616 C [2] BOLT (1/4-20X1-IN)  
15. 7C-8993 CY [1] FASTENER GP-FUEL INJ PUMP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 8N-3093 [1] SPRING-DETENT  
19. 8N-7276 Y [1] TORQUE CONTROL GP  
20. 8N-5784 C [1] DEFLECTOR-PULSE  
21. 8N-9594 [1] SPRING  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
23. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
24. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
25. 8M-8515 [1] SEAL-O-RING  
26. 5P-6620 [1] SEAL-O-RING  
27. 8L-5832 [1] NUT-HEX (10-32-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19890857
 

2W-1078: PUMP GP-GOV & FUEL INJ

2W-1078 PUMP GP-GOV & FUEL INJ
Type 2
i00357805 SEBP1989
2W1078 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
4. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 115-1249 [1] SETSCREW-SOCKET  
8. 8L-5832 [1] NUT-HEX (10-32-THD)  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
10. 2W-2410 Y [1] GOVERNOR GP  
13. 6I-2834 CY [1] PUMP GP-FUEL INJECTION  
14. 0S-1616 [2] BOLT (1/4-20X1-IN)  
15. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 2W-9657 [1] SPRING-DETENT  
19. 8N-7276 Y [1] TORQUE CONTROL GP  
20. 8N-5784 [1] DEFLECTOR-PULSE  
21. 8N-9594 [1] SPRING  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
23. 2W-5448 [1] COVER  
24. 7N-9907 [1] COVER  
27. 8L-5832 [1] NUT-HEX (10-32-THD)  
28. 3J-1907 [1] SEAL-O-RING  
29. 5P-6620 [1] SEAL-O-RING  
30. 8J-8343 [1] SEAL-O-RING  
31. 8M-8515 [1] SEAL-O-RING  
32. 033-5879 [1] SEAL-O-RING  
33. 144-0477 [1] GASKET  
34. 150-3726 [1] GASKET  
35. 150-3727 [1] GASKET-FUEL  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19890858
 

2W-6275: PUMP GP-GOV & FUEL INJ

2W-6275 PUMP GP-GOV & FUEL INJ
Type 1
i00359800 SEBP1989
2W6275 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
2. 033-5879 [1] SEAL-O-RING  
3. 8J-8343 [1] SEAL-O-RING  
4. 7N-5334 [1] SETSCREW-SOCKET (25.4-MM LG)  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
8. 8L-5832 C [1] NUT-HEX (10-32-THD)  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 C [1] NUT-HEX (10-32-THD)  
10. 2W-2410 Y [1] GOVERNOR GP  
11. 7N-8768 [1] GASKET  
12. 3J-1907 [1] SEAL-O-RING  
13. 8N-2525 Y [1] PUMP GP-GOV & FUEL INJ  
14. 0S-1616 C [2] BOLT (1/4-20X1-IN)  
15. 7C-8993 CY [1] FASTENER GP-FUEL INJ PUMP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 8N-3093 [1] SPRING-DETENT  
19. 8N-7276 Y [1] TORQUE CONTROL GP  
20. 8N-5784 C [1] DEFLECTOR-PULSE  
21. 8N-9594 [1] SPRING  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
23. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
24. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
25. 8M-8515 [1] SEAL-O-RING  
26. 5P-6620 [1] SEAL-O-RING  
27. 8L-5832 C [1] NUT-HEX (10-32-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19890859
 

2W-6275: PUMP GP-GOV & FUEL INJ

2W-6275 PUMP GP-GOV & FUEL INJ
Type 2
i00359801 SEBP1989
2W6275 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
4. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 115-1249 [1] SETSCREW-SOCKET  
8. 8L-5832 C [1] NUT-HEX (10-32-THD)  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 C [1] NUT-HEX (10-32-THD)  
10. 2W-2410 Y [1] GOVERNOR GP  
13. 6I-2833 CY [1] PUMP GP-FUEL INJECTION  
14. 0S-1616 C [2] BOLT (1/4-20X1-IN)  
15. 7C-8993 CY [1] FASTENER GP-FUEL INJ PUMP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 8N-3093 [1] SPRING-DETENT  
19. 8N-7276 Y [1] TORQUE CONTROL GP  
20. 8N-5784 C [1] DEFLECTOR-PULSE  
21. 8N-9594 [1] SPRING  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
23. 2W-5448 [1] COVER  
24. 7N-9907 [1] COVER  
27. 8L-5832 C [1] NUT-HEX (10-32-THD)  
28. 3J-1907 [1] SEAL-O-RING  
29. 5P-6620 [1] SEAL-O-RING  
30. 8J-8343 [1] SEAL-O-RING  
31. 8M-8515 [1] SEAL-O-RING  
32. 033-5879 [1] SEAL-O-RING  
33. 144-0477 [1] GASKET  
34. 150-3726 [1] GASKET  
35. 150-3727 [1] GASKET-FUEL  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
New Broken Link Spring Used In Governor
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
New Torque Specification For Fuel Injection Pump Bushing
1982/09/22
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Governor Drive Gears And Weight Assemblies
1983/09/14
Remanufactured Fuel Pump And Governor Groups
1983/10/26
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Fuel Transfer Pump Improved
1985/11/01
Bolt Removed From Governor And Fuel Injection Pump Group
1985/12/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Seals In Variable Timing Advance Available For Parts Service
1988/08/01
Governor Control Motor Polarity May Require A Change
1990/11/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Governor Control Cover Assembly Includes New Seal And Improved Cover{1264}
1997/07/01
Improved Governor Raise/Lower Motor Used In Governor Control Groups{1264}
1998/03/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Control
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Letter-China
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing & Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304B & 3306B MARINE ENGINES
Governor
3304B & 3306B MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New Broken Link Spring Used In Governor{1264}
1982/04/19
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Fuel Ratio Control Group Has Improved Diaphragm{1278,1257,1251}
1983/08/15
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Remanufactured Fuel Pump And Governor Groups{1251,1264}
1983/10/17
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}
1988/12/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Engine Magnetic Speed Sensor Used{1907}
1990/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Caterpillar Parts SIS Catalog 3306 :

PUMP GP-GOV & FUEL INJ
131-2651 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
131-2650 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
131-2649 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
119-3842 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
119-3842 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
110-6625 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
110-6625 PUMP GP-GOV & FUEL INJ
PUMP GP-FUEL TRANSFER
1W-1695 PUMP GP-FUEL TRANSFER
PUMP GP-GOV & FUEL INJ
146-8502 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1W-6905 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1W-6905 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-0057 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-0057 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-1078 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-1078 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-6275 PUMP GP-GOV & FUEL INJ

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.