AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-0272 COVER GP-CYLINDER HEAD S/N 7RJ1-6046 3306C TRUCK ENGINE


BASIC ENGINE
CYLINDER HEAD GP
HOUSING GP-FRONT
PAN GP-OIL
VALVE MECHANISM GP
CRANKSHAFT GP

TRUCK ENGINE 3306C TRUCK ENGINE 7RJ
 3306C Truck Engine 7RJ00001-UP SEBP1990 3306C 7RJ   (1991)

BASIC ENGINE

CYLINDER HEAD GP
COVER GP-CYLINDER HEAD
7C-0272 COVER GP-CYLINDER HEAD
CYLINDER HEAD AS
4P-9669 CYLINDER HEAD AS
CYLINDER HEAD GP
4P-9670 CYLINDER HEAD GP
CYLINDER HEAD GP
6I-2312 CYLINDER HEAD GP
FASTENER GP-CYLINDER HEAD
7E-4184 FASTENER GP-CYLINDER HEAD
FASTENER GP-CYLINDER HEAD
7N-9536 FASTENER GP-CYLINDER HEAD
 

#SEBP19900090
 

7C-0272: COVER GP-CYLINDER HEAD

7C-0272 COVER GP-CYLINDER HEAD
S/N 7RJ1-6046
i00396852 SEBP1990
7C0272 COVER GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 3306C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-0273 [1] COVER  
2. 5S-6735 [1] GASKET  
3. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
6. 2N-1287 C [1] ELBOW-FLARED  
7. 110-4903 [1] TUBE AS  
8. 2H-3755 B [2] BOLT (5/16-18X0.43-IN)  
9. 9M-1974 B [2] WASHER-HARD (8.8X16X2-MM THK)  
10. 2B-2404 [2] CLIP  
11. 3J-7352 C [1] CONNECTOR  
  3J-7354 C [1] SEAL-O-RING  
12. 0S-1594 B [1] BOLT (3/8-16X1-IN)  
13. 0S-1588 B [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19900091
 

2P-6529: COVER GP-FRONT HOUSING

2P-6529 COVER GP-FRONT HOUSING
S/N 7RJ1-6046
FOR USE WITH AIR COMPRESSOR
i00122026 SEBP1990
2P6529 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3306C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5769 [1] COVER-HOUSING  
2. 6N-7887 [1] GASKET-HOUSING COVER  
3. 3S-2713 [6] NUT-FULL (3/8-24-THD)  
4. 8M-9024 [6] WASHER-HARD (10.2X22.5X5-MM THK)  
5. 0S-1589 [2] BOLT (5/8-11X1.75-IN)  
6. 5F-3106 [1] SEAL-O-RING  
7. 7N-8374 C [1] COVER-PUMP  
8. 5P-8247 C [2] WASHER-HARD (17X32X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19900092
 

9Y-0832: COVER GP-FRONT HOUSING

9Y-0832 COVER GP-FRONT HOUSING
S/N 7RJ1-2710; 7RJ2751-5815
i00437274 SEBP1990
9Y0832 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3306C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-3106 [1] SEAL-O-RING  
2. 7N-8374 [1] COVER-PUMP  
3. 0S-1566 [2] BOLT (5/8-11X1.5-IN)  
4. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
 

#SEBP19900093
 

9Y-4721: COVER GP-FRONT HOUSING

9Y-4721 COVER GP-FRONT HOUSING
S/N 7RJ1-2710; 7RJ2751-5815
OIL FILL HOLE
i00168913 SEBP1990
9Y4721 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3306C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4526 [1] COVER  
2. 2P-2720 [1] GASKET  
3. 2P-3200 [2] BOLT-WASHER HEAD  
 

#SEBP19900094
 

9N-3499: COVER GP-OIL PAN

9N-3499 COVER GP-OIL PAN
S/N 7RJ1-2710; 7RJ2751-5815
WITHOUT OIL LEVEL GAUGE
i00437022 SEBP1990
9N3499 COVER GP-OIL PAN Parts scheme
  For full view, you need register

Parts for your 3306C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5H-7673 [1] COVER  
2. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 4H-9541 [1] GASKET  
 

#SEBP19900095
 

7E-4180: COVER GP-VALVE MECHANISM

7E-4180 COVER GP-VALVE MECHANISM
S/N 7RJ1-2672
i00404177 SEBP1990
7E4180 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3306C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4505 [15] LOCKWASHER  
2. 0S-1617 [15] BOLT (5/16-18X0.75-IN)  
3. 2W-1086 [1] COVER AS-CYLINDER HEAD  
4. 8S-1605 [1] SEAL-VALVE COVER  
5. 6L-4783 [15] BOLT-12 POINT HEAD (5/16-18X1.25-IN)  
6. JZ [1] BASE AS  
  J   PART OF JAKE BRAKE GP
  Z   NOT SERVICED SEPARATELY
 

#SEBP19900096
 

7E-4180: COVER GP-VALVE MECHANISM

7E-4180 COVER GP-VALVE MECHANISM
S/N 7RJ2673-2945
i00404180 SEBP1990
7E4180 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3306C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4505 [15] LOCKWASHER  
2. 0S-1617 [15] BOLT (5/16-18X0.75-IN)  
3. 2W-1086 [1] COVER AS-CYLINDER HEAD  
4. 8S-1605 C [2] SEAL-VALVE COVER  
5. 6L-4783 [15] BOLT-12 POINT HEAD (5/16-18X1.25-IN)  
6. JZ [1] BASE AS  
  C   CHANGE FROM PREVIOUS TYPE
  J   PART OF JAKE BRAKE GP
  Z   NOT SERVICED SEPARATELY
 

#SEBP19900097
 

7E-4180: COVER GP-VALVE MECHANISM

7E-4180 COVER GP-VALVE MECHANISM
S/N 7RJ2946-6002
i00404239 SEBP1990
7E4180 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3306C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [15] WASHER-HARD (8.8X16X2-MM THK)  
2. 2B-2695 [15] BOLT (5/16-18X0.875-IN)  
3. 2W-1086 [1] COVER AS-CYLINDER HEAD  
4. 133-1247 [1] SEAL-VALVE COVER  
5. 136-4193 [15] BOLT-12 POINT HEAD  
 

#SEBP19900098
 

8N-4745: COVER GP-VALVE MECHANISM

8N-4745 COVER GP-VALVE MECHANISM
S/N 7RJ1-6046
i00122470 SEBP1990
8N4745 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3306C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-1086 [1] COVER AS-CYLINDER HEAD  
2. 0S-1617 [15] BOLT (5/16-18X0.75-IN)  
3. 9M-1974 [15] WASHER-HARD (8.8X16X2-MM THK)  
4. 133-1247 [1] SEAL-VALVE COVER  
 

#SEBP19900099
 

4P-9856: CRANKSHAFT GP

4P-9856 CRANKSHAFT GP
S/N 7RJ1-6046
i00122113 SEBP1990
4P9856 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3306C TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-3652 J [2] PLATE-THRUST  
2. 344-2603 [1] CRANKSHAFT AS  
2A. 4P-7827 [1] GEAR-CRANKSHAFT (33-TEETH)  
2B. 5H-2671 [1] KEY-WOODRUFF  
2C. 8T-6757 [6] PLUG-PIPE  
3. 232-3233 J [7] BEARING-MAIN (STANDARD)  
  8N-8225 AB BEARING-MAIN (0.25-MM US)  
  8N-8226 AB BEARING-MAIN (0.51-MM US)  
  8N-8227 AB BEARING-MAIN (0.76-MM US)  
  8N-8228 AB BEARING-MAIN (0.51-MM OS)  
  8N-8229 AB BEARING-MAIN (0.25-MM US, 0.51-MM OS)  
  4P-7305 AB BEARING-MAIN (0.51-MM OS, 0.51-MM US)  
  4P-7306 AB BEARING-MAIN (0.51-MM OS, 0.76-MM US)  
   
    AVAILABLE REPLACEMENT PART(S):
  196-9534 AJ KIT-BASIC ENGINE REPAIR (MAIN BEARING)  
    (INCLUDES STANDARD BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Truck Engine News
Separate Valve Stem Gauges Available
1982/06/23
Engine Valve Stem "use Again " Specifications
1983/03/02
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads
1988/06/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Correction For Camshaft And Valve Seat Specifications
1992/06/01
New Valve Guides Available {1104}
1995/12/15
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/10/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/01
Engine News
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Cylinder Head Gasket
Cylinder Head Gasket
Specifications
Cylinder Head
3306C DIESEL TRUCK ENGINE
Cylinder Head
3306C Truck Engine
Cylinder Head Valves
3306C Truck Engine
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Testing and Adjusting
Fuel Injection Nozzle - Test
3306C Truck Engine
Engine Valve Lash - Inspect/Adjust
3306C Truck Engine
Disassembly and Assembly
Cylinder Head
3306C DIESEL TRUCK ENGINE
Valves
3306C DIESEL TRUCK ENGINE
Valve Guides
3306C DIESEL TRUCK ENGINE
Valve Seat Inserts
3306C DIESEL TRUCK ENGINE
Water Directors
3306C DIESEL TRUCK ENGINE
Cylinder Head - Remove
3306C Truck Engine
Cylinder Head - Install
3306C Truck Engine
Camshaft Bearings - Remove and Install
3306C Truck Engine
Inlet and Exhaust Valves - Remove and Install
3306C Truck Engine
Inlet and Exhaust Valve Guides - Remove and Install
3306C Truck Engine
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3306C Truck Engine
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20

Caterpillar Parts SIS Catalog 3306C :

COVER GP-CYLINDER BLOCK
7N-1342 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7N-1292 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7C-6189 COVER GP-CYLINDER BLOCK
CAMSHAFT GP
7E-9777 CAMSHAFT GP
AIR COMPRESSOR GP
9N-8069 AIR COMPRESSOR GP
AIR COMPRESSOR GP
7N-5642 AIR COMPRESSOR GP
AIR COMPRESSOR GP
7N-5642 AIR COMPRESSOR GP
AIR COMPRESSOR GP
7N-5642 AIR COMPRESSOR GP
COVER GP-FRONT HOUSING
2P-6529 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
9Y-0832 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
9Y-4721 COVER GP-FRONT HOUSING
COVER GP-OIL PAN
9N-3499 COVER GP-OIL PAN
COVER GP-VALVE MECHANISM
7E-4180 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7E-4180 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7E-4180 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
8N-4745 COVER GP-VALVE MECHANISM

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.