AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3406B Truck Engine (PEEC III) 4CK00001-00845 FUEL SYSTEM Caterpillar SIS



TRUCK ENGINE 3406C TRUCK ENGINE 4CK
 3406B Truck Engine (PEEC III) 4CK00001-00845 SEBP1991 3406C 4CK   (1991)

Parts group 3406C:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-FUEL RATIO
LINES GP-FUEL RATIO CONTROL
7E-8450 LINES GP-FUEL RATIO CONTROL
7E-8450 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL RATIO CONTROL
7W-8803 LINES GP-FUEL RATIO CONTROL
7W-8803 LINES GP-FUEL RATIO CONTROL
CONTROL GP-GOVERNOR
CONTROL & HOUSING GP-GOVERNOR
4P-7563 CONTROL & HOUSING GP-GOVERNOR
4P-7563 CONTROL & HOUSING GP-GOVERNOR
PART OF 4P-7564 GOVERNOR GP-ELECTRONIC
LEVER GP-GOVERNOR CONTROL
4W-9590 LEVER GP-GOVERNOR CONTROL
4W-9590 LEVER GP-GOVERNOR CONTROL
PART OF 4P-7564 GOVERNOR GP-ELECTRONIC
FILTER GP-FUEL
FILTER GP-FUEL
4N-1981 FILTER GP-FUEL
4N-1981 FILTER GP-FUEL -ENGINE
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
PRIMARY
AN ATTACHMENT
LINES GP-FUEL FILTER
4W-9379 LINES GP-FUEL FILTER
4W-9379 LINES GP-FUEL FILTER
PEEC-HIGH MOUNTED
LINES GP-FUEL FILTER
7W-8788 LINES GP-FUEL FILTER
7W-8788 LINES GP-FUEL FILTER
GOVERNOR GP
CONTROL & HOUSING GP-GOVERNOR
4P-7563 CONTROL & HOUSING GP-GOVERNOR
4P-7563 CONTROL & HOUSING GP-GOVERNOR
PART OF 4P-7564 GOVERNOR GP-ELECTRONIC
DRIVE GP-GOVERNOR & FUEL PUMP
2W-4544 DRIVE GP-GOVERNOR & FUEL PUMP
2W-4544 DRIVE GP-GOVERNOR & FUEL PUMP
GOVERNOR GP-ELECTRONIC
4P-7564 GOVERNOR GP-ELECTRONIC
4P-7564 GOVERNOR GP-ELECTRONIC
PART OF 4P-7565 PUMP GP-GOV & FUEL INJ
LEVER GP-GOVERNOR CONTROL
4W-9590 LEVER GP-GOVERNOR CONTROL
4W-9590 LEVER GP-GOVERNOR CONTROL
PART OF 4P-7564 GOVERNOR GP-ELECTRONIC
PUMP GP-GOV & FUEL INJ
4P-7565 PUMP GP-GOV & FUEL INJ
4P-7565 PUMP GP-GOV & FUEL INJ
LINES GP-FUEL
FITTING GP-FUEL LINES
4P-2182 FITTING GP-FUEL LINES
4P-2182 FITTING GP-FUEL LINES
7/8-14 THD, 45 DEGREE FLARE. QUICK DISCONNECT
AN ATTACHMENT
FITTING GP-FUEL LINES
7W-6973 FITTING GP-FUEL LINES
7W-6973 FITTING GP-FUEL LINES
FOR USE WITH A PROVIDED 3/8 NPTF FUEL RETURN CONNECTION FOR CUSTOMER INTERFACE
AN ATTACHMENT
LINES GP-FUEL FILTER
4W-9379 LINES GP-FUEL FILTER
4W-9379 LINES GP-FUEL FILTER
PEEC-HIGH MOUNTED
LINES GP-FUEL FILTER
7W-8788 LINES GP-FUEL FILTER
7W-8788 LINES GP-FUEL FILTER
LINES GP-FUEL RATIO CONTROL
7E-8450 LINES GP-FUEL RATIO CONTROL
7E-8450 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL RATIO CONTROL
7W-8803 LINES GP-FUEL RATIO CONTROL
7W-8803 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-1927 LINES GP-FUEL INJECTION
4P-1927 LINES GP-FUEL INJECTION
S/N 4CK1-196
LINES GP-FUEL INJECTION
4P-1927 LINES GP-FUEL INJECTION
4P-1927 LINES GP-FUEL INJECTION
S/N 4CK197-845
LINES GP-FUEL INJECTION
4P-1928 LINES GP-FUEL INJECTION
4P-1928 LINES GP-FUEL INJECTION
S/N 4CK1-196
LINES GP-FUEL INJECTION
4P-1928 LINES GP-FUEL INJECTION
4P-1928 LINES GP-FUEL INJECTION
S/N 4CK197-845
LINES GP-FUEL INJECTION
4P-1929 LINES GP-FUEL INJECTION
4P-1929 LINES GP-FUEL INJECTION
S/N 4CK1-196
LINES GP-FUEL INJECTION
4P-1929 LINES GP-FUEL INJECTION
4P-1929 LINES GP-FUEL INJECTION
S/N 4CK197-845
LINES GP-FUEL INJECTION
4P-1930 LINES GP-FUEL INJECTION
4P-1930 LINES GP-FUEL INJECTION
S/N 4CK1-196
LINES GP-FUEL INJECTION
4P-1930 LINES GP-FUEL INJECTION
4P-1930 LINES GP-FUEL INJECTION
S/N 4CK197-845
LINES GP-FUEL INJECTION
4P-3673 LINES GP-FUEL INJECTION
4P-3673 LINES GP-FUEL INJECTION
S/N 4CK1-196
PART OF 4P-1927, 4P-1928, 4P-1929, 4P-1930, 4P-6018 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-3674 LINES GP-FUEL INJECTION
4P-3674 LINES GP-FUEL INJECTION
S/N 4CK1-196
PART OF 4P-1927, 4P-1928, 4P-1929, 4P-1930, 4P-6018 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-3675 LINES GP-FUEL INJECTION
4P-3675 LINES GP-FUEL INJECTION
S/N 4CK1-196
PART OF 4P-1927, 4P-1928, 4P-1929, 4P-1930, 4P-6018 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-6018 LINES GP-FUEL INJECTION
4P-6018 LINES GP-FUEL INJECTION
S/N 4CK1-196
LINES GP-FUEL INJECTION
4P-6018 LINES GP-FUEL INJECTION
4P-6018 LINES GP-FUEL INJECTION
S/N 4CK197-845
LINES GP-FUEL INJECTION
4P-9658 LINES GP-FUEL INJECTION
4P-9658 LINES GP-FUEL INJECTION
S/N 4CK197-845
PART OF 4P-1927, 4P-1928, 4P-1929, 4P-1930, 4P-6018 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9659 LINES GP-FUEL INJECTION
4P-9659 LINES GP-FUEL INJECTION
S/N 4CK197-845
PART OF 4P-1927, 4P-1928, 4P-1929, 4P-1930, 4P-6018 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9660 LINES GP-FUEL INJECTION
4P-9660 LINES GP-FUEL INJECTION
S/N 4CK197-845
PART OF 4P-1927, 4P-1928, 4P-1929, 4P-1930, 4P-6018 LINES GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
DRIVE GP-GOVERNOR & FUEL PUMP
2W-4544 DRIVE GP-GOVERNOR & FUEL PUMP
2W-4544 DRIVE GP-GOVERNOR & FUEL PUMP
FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP -ENGINE
PUMP GP-FUEL INJECTION
4P-1366 PUMP GP-FUEL INJECTION
4P-1366 PUMP GP-FUEL INJECTION
PART OF 4P-7565 PUMP GP-GOV & FUEL INJ
PUMP GP-FUEL INJECTION
4P-7681 PUMP GP-FUEL INJECTION
4P-7681 PUMP GP-FUEL INJECTION
PART OF 4P-1366 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
4P-7565 PUMP GP-GOV & FUEL INJ
4P-7565 PUMP GP-GOV & FUEL INJ
PUMP GP-FUEL PRIMING
ADAPTER GP-PRIMING PUMP
9N-2722 ADAPTER GP-PRIMING PUMP
9N-2722 ADAPTER GP-PRIMING PUMP
FOR USE WITH @@@@@ 7W-8959@@@@@
AN ATTACHMENT
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
FOR USE WITH @@@@@ 4N-1981@@@@@
ALSO AN ATTACHMENT
PUMP GP-FUEL PRIMING
9N-3937 PUMP GP-FUEL PRIMING
9N-3937 PUMP GP-FUEL PRIMING
FORWARD FACING
ALSO AN ATTACHMENT
PUMP GP-FUEL TRANSFER
PUMP & MTG GP-FUEL TRANSFER
2W-4381 PUMP & MTG GP-FUEL TRANSFER
2W-4381 PUMP & MTG GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1W-1700 PUMP GP-FUEL TRANSFER
1W-1700 PUMP GP-FUEL TRANSFER
PART OF 2W-4381 PUMP & MTG GP-FUEL TRANSFER
SHUTOFF GP
SHUTOFF GP-MANUAL
2W-9161 SHUTOFF GP-MANUAL
2W-9161 SHUTOFF GP-MANUAL
FOR USE WITH PEEC GOVERNOR
AN ATTACHMENT

Information:

(For parts list, see above)

Service Magazine
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Truck Engine News
Information For Repair Of Hydraulic Fuel Ratio Controls
1983/08/31
New Components Used In Fuel Ratio Control Groups
1992/05/01
New Diaphragm Used In Fuel Ratio Control Groups
1992/06/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Fuel Rack Controls
3406B (PEEC III) TRUCK ENGINE
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Truck Engine News
Information For Repair Of Hydraulic Fuel Ratio Controls
1983/08/31
New Components Used In Fuel Ratio Control Groups
1992/05/01
New Diaphragm Used In Fuel Ratio Control Groups
1992/06/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Truck Engine News
New Pedal Mounted Throttle Position Sensor Available{1913}
1994/01/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Disassembly and Assembly
Fuel Injection Pump Housing And Rack Actuator Package 1286-011
3406B DIESEL TRUCK ENGINE (PEEC III)
Rack Actuator Package
3406B DIESEL TRUCK ENGINE (PEEC III)
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Truck Engine News
Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) Systems
1992/04/01
Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) And Electronic Systems
1993/04/01
Special Instruction
Procedures To Install a 3406C Electronic Engine, And Reprogram The Electronic Control Module (ECM), In a Truck Chassis Formerly Equipped With a 3406B PEEC Engine{1000, 1900}
Procedures To Install a 3406C Electronic Engine, And Reprogram The Electronic Control Module (ECM), In a Truck Chassis Formerly Equipped With a 3406B PEEC Engine{1000, 1900}
Service Letter-NACD
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Service Letter-Australia
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Service Letter-CFEL
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Service Letter-Americas
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Service Letter-Truck/Ag/Marine
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Service Letter-China
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Service Letter-Asia
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Service Letter-APD
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Service Magazine
Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) Systems{1900}
1992/04/20
Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) And Electronic Systems{1900}
1993/04/12
Truck Engine News
Gasket Leakage On Aftermarket Fuel Filters
1985/12/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/01
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies{1261}
1997/11/18
Troubleshooting Reminder For Low Power Or Intermittent Low Power Symptoms {1250,1252,1256,1260,1261,1273}
1998/09/01
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Specifications
Primary Fuel Filter
3406B (PEEC III) TRUCK ENGINE
Fuel Filter Base
3406B (PEEC III) TRUCK ENGINE
Fuel Filter (Primary)
3406C (PEEC III) Truck Engine
Fuel Filter Base
3406C (PEEC III) Truck Engine
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Filter And Base
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Priming Pump
3406C (PEEC III) TRUCK ENGINE
Fuel Filter And Base
3406C (PEEC III) TRUCK ENGINE
Service Magazine
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Truck Engine News
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Improved Locknut In Timing Advance On Fuel Pump And Governor Drive Group
1988/07/01
New Carrier Assembly Used In Governor And Fuel Pump Drive Groups
1992/06/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly.
1992/09/01
3406 Truck Engine Component Update
1992/10/01
Summery Of Changes To Timing Advance Drive Groups
1993/05/01
New Bonnet Used In Fuel Injection Pump Group
1993/06/01
Fuel Injection Pump Improvements{1251}
1994/01/01
Fuel Injection Pump Improvements{1251}
1994/04/22
Procedure For Lapping Sealing Surfaces Of Fuel Injection Pump Barrels And Bonnets{1251}
1994/06/24
Be Sure To Use The Correct Reverse Flow Check Valve{1251}
1994/07/01
Changing Complete Sets Of Fuel Injection Pump Groups May Not Fix Low Power Problems{1251}
1994/08/30
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance{1251}
1994/09/01
Electronic Timing Advance Improvements{1272,1253,1264}
1995/01/01
Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/27
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/01
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Australia
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-CFEL
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-CSARL
Service Letter-Americas
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Governor And Fuel Pump Drive Group (Timing Advance Unit)
3406B (PEEC III) TRUCK ENGINE
Governor and Fuel Pump Drive
3406C (PEEC III) Truck Engine
Service Letter-China
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Asia
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-APD
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Disassembly and Assembly
Timing Advance Unit
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pump Housing And Rack Actuator Package 1286-011
3406B DIESEL TRUCK ENGINE (PEEC III)
Rack Actuator Package
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pumps
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pumps
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Pump Housing
3406C (PEEC III) TRUCK ENGINE
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Carrier Assembly Used In Governor And Fuel Pump Drive Groups {1288,1299}
1992/08/10
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Fuel Injection Pump Improvements{1251}
1994/02/07
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Truck Engine News
Do Not Use A Wire Brush On Fuel Nozzles
1982/09/29
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Gasket Leakage On Aftermarket Fuel Filters
1985/12/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/01
3406 Truck Engine Component Update
1992/10/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles {1254}
1994/05/31
Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01
Shutoff Valve In Fuel Return Lines{1274,1279}
1995/10/01
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/01
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Lines
3406B (PEEC III) TRUCK ENGINE
Fuel Injection Nozzle And Adapter
3406B (PEEC III) TRUCK ENGINE
Disassembly and Assembly
Fuel Injection Lines
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Line Adapters
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Nozzles And Adapters
3406B DIESEL TRUCK ENGINE (PEEC III)
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/17
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Truck Engine News
3406 Truck Engine Component Update
1992/10/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles {1254}
1994/05/31
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/01
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Lines
3406C (PEEC III) Truck Engine
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Lines
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Line Adapters
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Nozzles And Adapters
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Lines
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Line Adapters
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Nozzles And Adapters
3406C (PEEC III) TRUCK ENGINE
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/17
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Truck Engine News
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Truck Engine News
Use Only EPA-Approved Rack And Idle Setting; Change Seal, Data Plate
1981/09/23
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems
1982/09/01
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/27
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Information For Repair Of Hydraulic Fuel Ratio Controls
1983/08/31
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Gasket Leakage On Aftermarket Fuel Filters
1985/12/01
Fuel Sulfur Analyzer Available
1986/01/01
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
New Engine Timing Indicator Group Available
1986/07/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals
1986/11/01
Improved Locknut In Timing Advance On Fuel Pump And Governor Drive Group
1988/07/01
New Personality Modules Require New Service Program Modules
1990/03/01
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/01
New Components Used In Fuel Ratio Control Groups
1992/05/01
New Diaphragm Used In Fuel Ratio Control Groups
1992/06/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly.
1992/09/01
3406 Truck Engine Component Update
1992/10/01
Summery Of Changes To Timing Advance Drive Groups
1993/05/01
New Bonnet Used In Fuel Injection Pump Group
1993/06/01
Fuel Injection Pump Improvements{1251}
1994/01/01
New Pedal Mounted Throttle Position Sensor Available{1913}
1994/01/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Fuel Injection Pump Improvements{1251}
1994/04/22
Final Control Group (Personality Module) Update{1902}
1994/04/22
Procedure For Lapping Sealing Surfaces Of Fuel Injection Pump Barrels And Bonnets{1251}
1994/06/24
Changing Complete Sets Of Fuel Injection Pump Groups May Not Fix Low Power Problems{1251}
1994/08/30
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance{1251}
1994/09/01
Electronic Timing Advance Improvements{1272,1253,1264}
1995/01/01
Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01
New &quot;Fuel System Reuse And Salvage Guides&quot; Reference Manual Available{1250}
1997/04/01
Lubricity Limit Added To Preferred Distillate Fuel Recommendation{1280}
1997/08/01
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available{0374,1250}
1998/06/01
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250}
1998/06/01
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Procedures To Install a 3406C Electronic Engine, And Reprogram The Electronic Control Module (ECM), In a Truck Chassis Formerly Equipped With a 3406B PEEC Engine{1000, 1900}
Procedures To Install a 3406C Electronic Engine, And Reprogram The Electronic Control Module (ECM), In a Truck Chassis Formerly Equipped With a 3406B PEEC Engine{1000, 1900}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Letter-NACD
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Service Letter-China
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Service Letter-Asia
Systems Operation
Fuel System
3406C (PEEC III) Truck Engines
Service Letter-APD
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Testing and Adjusting
Fuel System
3406C (PEEC III) Truck Engines
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Faster Response Water Temperature Regulators; Service Simplified{1350,1355}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
4C6534 Harness Now Available To Set Engine Electronic Speed Switches{7427,0779,0785}
1991/03/11
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/17
Troubleshooting Electrical Noise Problems {1900}
1992/03/23
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
Diesel Truck Engine Smoke Limits{1250}
1993/07/26
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Magazine
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Truck Engine News
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Do Not Use A Wire Brush On Fuel Nozzles
1982/09/29
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
New 8T2998 Lubricant Available
1986/02/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Improved Locknut In Timing Advance On Fuel Pump And Governor Drive Group
1988/07/01
New Carrier Assembly Used In Governor And Fuel Pump Drive Groups
1992/06/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly.
1992/09/01
3406 Truck Engine Component Update
1992/10/01
Summery Of Changes To Timing Advance Drive Groups
1993/05/01
New Bonnet Used In Fuel Injection Pump Group
1993/06/01
Fuel Injection Pump Improvements{1251}
1994/01/01
Fuel Injection Pump Improvements{1251}
1994/04/22
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles {1254}
1994/05/31
Procedure For Lapping Sealing Surfaces Of Fuel Injection Pump Barrels And Bonnets{1251}
1994/06/24
Be Sure To Use The Correct Reverse Flow Check Valve{1251}
1994/07/01
Changing Complete Sets Of Fuel Injection Pump Groups May Not Fix Low Power Problems{1251}
1994/08/30
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance{1251}
1994/09/01
Electronic Timing Advance Improvements{1272,1253,1264}
1995/01/01
Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/27
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/01
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2009/04/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
New Electronic Transducer Module Installation Instructions For 3406B And 3406C Truck Engines{1900, 1904, 1917, 1924}
New Electronic Transducer Module Installation Instructions For 3406B And 3406C Truck Engines{1900, 1904, 1917, 1924}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Australia
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-CFEL
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-CSARL
Service Letter-Americas
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Pump
3406B (PEEC III) TRUCK ENGINE
Fuel Injection Pump Housing
3406B (PEEC III) TRUCK ENGINE
Fuel Injection Pump Camshaft
3406B (PEEC III) TRUCK ENGINE
Governor And Fuel Pump Drive Group (Timing Advance Unit)
3406B (PEEC III) TRUCK ENGINE
Fuel Injection Nozzle And Adapter
3406B (PEEC III) TRUCK ENGINE
Fuel Injection Pump
3406C (PEEC III) Truck Engine
Fuel Injection Pump Housing
3406C (PEEC III) Truck Engine
Governor and Fuel Pump Drive
3406C (PEEC III) Truck Engine
Fuel Injection Pump Housing
3406C (PEEC III) Truck Engine
Service Letter-China
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Asia
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Disassembly and Assembly
Timing Advance Unit
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pump Housing And Rack Actuator Package 1286-011
3406B DIESEL TRUCK ENGINE (PEEC III)
Rack Actuator Package
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Shut-Off Solenoid
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pumps
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Line Adapters
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Nozzles And Adapters
3406B DIESEL TRUCK ENGINE (PEEC III)
Timing Advance Unit
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Pump Housing And Rack Actuator Package 1286-011
3406C (PEEC III) TRUCK ENGINE
Rack Actuator Package
3406C (PEEC III) TRUCK ENGINE
Fuel Shut-Off Solenoid
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Pumps
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Pump Housing
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Line Adapters
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Nozzles And Adapters
3406C (PEEC III) TRUCK ENGINE
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Carrier Assembly Used In Governor And Fuel Pump Drive Groups {1288,1299}
1992/08/10
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Fuel Injection Pump Improvements{1251}
1994/02/07
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/08
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Specifications
Fuel Priming Pump Group
3406B (PEEC III) TRUCK ENGINE
Disassembly and Assembly
Fuel Priming Pump
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Priming Pump
3406C (PEEC III) TRUCK ENGINE
Service Magazine
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Truck Engine News
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Improved Locknut In Timing Advance On Fuel Pump And Governor Drive Group
1988/07/01
New Carrier Assembly Used In Governor And Fuel Pump Drive Groups
1992/06/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly.
1992/09/01
3406 Truck Engine Component Update
1992/10/01
Summery Of Changes To Timing Advance Drive Groups
1993/05/01
New Bonnet Used In Fuel Injection Pump Group
1993/06/01
Fuel Injection Pump Improvements{1251}
1994/01/01
Fuel Injection Pump Improvements{1251}
1994/04/22
Procedure For Lapping Sealing Surfaces Of Fuel Injection Pump Barrels And Bonnets{1251}
1994/06/24
Be Sure To Use The Correct Reverse Flow Check Valve{1251}
1994/07/01
Changing Complete Sets Of Fuel Injection Pump Groups May Not Fix Low Power Problems{1251}
1994/08/30
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance{1251}
1994/09/01
Electronic Timing Advance Improvements{1272,1253,1264}
1995/01/01
Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/27
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/01
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/04/01
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Australia
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-CFEL
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-CSARL
Service Letter-Americas
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Specifications
Governor And Fuel Pump Drive Group (Timing Advance Unit)
3406B (PEEC III) TRUCK ENGINE
Fuel Transfer Pump
3406B (PEEC III) TRUCK ENGINE
Fuel Transfer Pump
3406C (PEEC III) Truck Engine
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Asia
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Letter-APD
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Disassembly and Assembly
Fuel Transfer Pump
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Transfer Pump
3406C (PEEC III) TRUCK ENGINE
Service Magazine
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Carrier Assembly Used In Governor And Fuel Pump Drive Groups {1288,1299}
1992/08/10
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Fuel Injection Pump Improvements{1251}
1994/02/07
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Specifications
Fuel Rack Controls
3406C (PEEC III) Truck Engine
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Faster Response Water Temperature Regulators; Service Simplified{1350,1355}
1985/11/25
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Specifications
Shutoff Solenoid
3406C (PEEC III) Truck Engine
Manual Shutoff
3406C (PEEC III) Truck Engine
Disassembly and Assembly
Fuel Shut-Off Solenoid
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Shut-Off Solenoid
3406C (PEEC III) TRUCK ENGINE
Service Magazine
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Truck Engine News
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Fuel Sulfur Analyzer Available
1986/01/01
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Personality Modules Require New Service Program Modules
1990/03/01
Price Adjustments On Service Program Modules
1990/10/01
Engine News
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly
1979/04/25
Changes To 9S240 Rack Position Tool Group; Revision To Special Instructions
1980/05/14
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}
Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Installing the 7X1180 Internal Expansion Board in the 8T8697 ECAP Service Tool{0781, 0782}
Installing the 7X1180 Internal Expansion Board in the 8T8697 ECAP Service Tool{0781, 0782}
New Electronic Transducer Module Installation Instructions For 3406B And 3406C Truck Engines{1900, 1904, 1917, 1924}
New Electronic Transducer Module Installation Instructions For 3406B And 3406C Truck Engines{1900, 1904, 1917, 1924}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Technical Information Bulletin
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Install and Test Fuel Injection Pumps Used on 3406B, 3406C, and 3406 PEEC Engines Using the 4C-8192 Heavy-Duty Coupling Group on the Fuel Injection Equipment Test Stand{1251}
Install and Test Fuel Injection Pumps Used on 3406B, 3406C, and 3406 PEEC Engines Using the 4C-8192 Heavy-Duty Coupling Group on the Fuel Injection Equipment Test Stand{1251}
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}
Using the 7X1400 Digital Diagnostic Tool (DDT) Group{0781, 0782}
Using the 7X1700 Communication Adapter Group{0781, 0782}
Using the 7X1700 Communication Adapter Group{0781, 0782}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
New Personality Modules Require New Service Program Modules {1902}
1990/03/26
Price Adjustments On Service Program Modules{1902,0782}
1990/10/08
Service Tools For Electronic Controls {0781,0782}
1994/04/25
Truck Engine News
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Special Instruction
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23

Truck sale:

Caterpillar 3406C
 
Caterpillar 3406C
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
 
65,000 
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3406C, Stationary Generator Sets, Construction
43,000 
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3406 C, Industrial engines, Construction
42,500 
Caterpillar 3406 C, Industrial engines, Construction
- Industrial engines
RING POWER CORP.
Caterpillar 3406 C, Industrial engines, Construction
59,500 
Caterpillar 3406 C, Industrial engines, Construction
- Industrial engines
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.