AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-3706 CYLINDER HEAD GP Type 2 FOR USE WITH ATAAC ENGINES ONLY AN ATTACHMENT 3406B TRUCK ENGINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP

TRUCK ENGINE 3406B TRUCK ENGINE 4CK
 3406B Truck Engine (PEEC III) 4CK00001-00845 SEBP1991 3406B 4CK   (1991)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
CYLINDER HEAD GP
7E-9580 CYLINDER HEAD GP
CYLINDER HEAD GP
7E-9908 CYLINDER HEAD GP
 

#SEBP19910120
 

7E-3706: CYLINDER HEAD GP

7E-3706 CYLINDER HEAD GP
Type 2
FOR USE WITH ATAAC ENGINES ONLY
AN ATTACHMENT
i00402793 SEBP1991
7E3706 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-0970 Y [1] CYLINDER HEAD GP  
2. 3S-5496 [2] SEAL-O-RING  
3. 7W-5435 [6] ADAPTER-NOZZLE  
4. 5H-7153 [6] SEAL-O-RING  
5. 4N-7253 [6] GASKET-CHAMBER  
6. 5F-4899 [12] BOLT (3/8-16X5.5-IN)  
7. 6L-7442 [6] STUD-TAPERLOCK (5/16-18X1.08-IN)  
8. 4W-1055 [24] SEAL  
9. 9X-8904 C [20] BOLT  
10. 6I-3066 C [1] GASKET-CYLINDER HEAD  
11. 8T-6767 [1] PLUG-PIPE (3/8-18-THD)  
12. 5H-1504 [20] WASHER-HARD (20X33.5X5-MM THK)  
13. 7W-6492 [3] PLUG-PIPE (1/2-14-THD)  
14. 7W-6492 B [1] PLUG-PIPE (1/2-14-THD)(USE WITHOUT AIR COMPRESSOR)  
15. 4S-6137 C [12] STUD-TAPERLOCK (3/8-16X3.1-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19910121
 

7E-3706: CYLINDER HEAD GP

7E-3706 CYLINDER HEAD GP
Type 3
FOR USE WITH ATAAC ENGINES ONLY
AN ATTACHMENT
i00402817 SEBP1991
7E3706 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-0970 Y [1] CYLINDER HEAD GP  
2. 3S-5496 [2] SEAL-O-RING  
3. 100-6920 C [6] ADAPTER-NOZZLE  
4. 8M-5249 C [6] SEAL-O-RING (34.52MM ID)  
5. 4N-7253 [6] GASKET-CHAMBER  
6. 5F-4899 [12] BOLT (3/8-16X5.5-IN)  
7. 6L-7442 [6] STUD-TAPERLOCK (5/16-18X1.08-IN)  
8. 3E-6772 C [24] SEAL (WATER)  
9. 124-1855 C [20] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
10. 6I-3066 [1] GASKET-CYLINDER HEAD  
11. 8T-6767 [1] PLUG-PIPE (3/8-18-THD)  
12. 5H-1504 [20] WASHER-HARD (20X33.5X5-MM THK)  
13. 7W-6492 [3] PLUG-PIPE (1/2-14-THD)  
  5P-3931 AB COMPOUND-ANTI-SEIZE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19910122
 

7E-9580: CYLINDER HEAD GP

7E-9580 CYLINDER HEAD GP
i00391708 SEBP1991
7E9580 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2203 Y [1] CYLINDER HEAD GP  
2. 6L-8562 [1] STUD-TAPERLOCK (3/8-16X1.77-IN)  
3. 7W-5435 [6] ADAPTER-NOZZLE  
4. 5H-7153 [6] SEAL-O-RING  
5. 7E-9579 [6] GASKET  
6. 5F-4899 [12] BOLT (3/8-16X5.5-IN)  
7. 6L-7442 [6] STUD-TAPERLOCK (5/16-18X1.08-IN)  
8. 4W-1055 [24] SEAL  
9. 2H-3750 [20] BOLT (3/4-16X7.5-IN)  
10. 7E-6000 [1] GASKET-CYLINDER HEAD  
11. 8T-6767 [1] PLUG-PIPE (3/8-18-THD)  
12. 5H-1504 [20] WASHER-HARD (20X33.5X5-MM THK)  
13. 7W-6492 [3] PLUG-PIPE (1/2-14-THD)  
14. 7W-6492 B [1] PLUG-PIPE (1/2-14-THD)  
15. 4S-6137 [11] STUD-TAPERLOCK (3/8-16X3.1-IN)  
16. 3S-5496 [2] SEAL-O-RING  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19910123
 

7E-9908: CYLINDER HEAD GP

7E-9908 CYLINDER HEAD GP
i00392145 SEBP1991
7E9908 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2203 Y [1] CYLINDER HEAD GP  
2. 6L-8562 [1] STUD-TAPERLOCK (3/8-16X1.77-IN)  
3. 7W-5435 [6] ADAPTER-NOZZLE  
4. 5H-7153 [6] SEAL-O-RING  
5. 7E-9579 [6] GASKET  
6. 5F-4899 [12] BOLT (3/8-16X5.5-IN)  
7. 6L-7442 [6] STUD-TAPERLOCK (5/16-18X1.08-IN)  
8. 4W-1055 [24] SEAL  
9. 2H-3750 [20] BOLT (3/4-16X7.5-IN)  
10. 7E-6000 [1] GASKET-CYLINDER HEAD  
11. 8T-6767 [1] PLUG-PIPE (3/8-18-THD)  
12. 5H-1504 [20] WASHER-HARD (20X33.5X5-MM THK)  
13. 7W-6492 [3] PLUG-PIPE (1/2-14-THD)  
14. 3S-5496 [2] SEAL-O-RING  
15. 4S-6137 [11] STUD-TAPERLOCK (3/8-16X3.1-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19910124
 

7W-2203: CYLINDER HEAD GP

7W-2203 CYLINDER HEAD GP
PART OF 105-1531, 4W-2436, 7C-0041, 7E-9580, 7E-9908 CYLINDER HEAD GP
ALSO AN ATTACHMENT
i00109127 SEBP1991
7W2203 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-0007 CY [1] CYLINDER HEAD AS  
2. 2W-2622 [12] VALVE-INLET  
3. 2N-5775 [12] DOWEL  
4. 2A-4429 [48] LOCK-RETAINER  
5. 4W-2474 [24] ROTOCOIL AS  
6. 4W-2471 [24] SPRING-VALVE  
7. 1W-3860 [12] VALVE-EXHAUST  
8. 173-7188 [24] GUIDE-VALVE  
9. 4W-2472 [24] SPRING-VALVE  
10. 4W-2473 [24] WASHER-VALVE SPRING GUIDE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19910125
 

7W-2203: CYLINDER HEAD GP

7W-2203 CYLINDER HEAD GP
PART OF 105-1531, 4W-2436 CYLINDER HEAD GP
ALSO AN ATTACHMENT
i00109128 SEBP1991
7W2203 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3775 CY [1] CYLINDER HEAD AS  
2. 108-5902 [12] VALVE-INLET  
3. 2N-5775 [12] DOWEL  
4. 2A-4429 [48] LOCK-RETAINER  
5. 4W-2474 [24] ROTOCOIL AS  
6. 4W-2471 [24] SPRING-VALVE  
7. 106-1111 [12] VALVE-EXHAUST  
8. 173-7188 [24] GUIDE-VALVE  
9. 4W-2472 [24] SPRING-VALVE  
10. 4W-2473 [24] WASHER-VALVE SPRING GUIDE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP19910126
 

4P-4291: DAMPER & PULLEY GP

4P-4291 DAMPER & PULLEY GP
7.5 INCH DIAMETER
i00554875 SEBP1991
4P4291 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0944 [1] PULLEY-CRANKSHAFT  
2. 167-8126 C [1] DAMPER AS  
3. 2A-2814 [6] BOLT (5/8-18X5.5-IN)  
4. 168-2100 [1] SPACER (131.57X163.6X8-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP19910127
 

4P-4292: DAMPER & PULLEY GP

4P-4292 DAMPER & PULLEY GP
8.5 IN DIA PULLEY
i00168554 SEBP1991
4P4292 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8126 C [1] DAMPER AS  
2. 9N-0722 [1] PULLEY-CRANKSHAFT  
3. 2A-2814 [6] BOLT (5/8-18X5.5-IN)  
4. 168-2100 [1] SPACER (131.57X163.6X8-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP19910128
 

4P-4296: DAMPER & PULLEY GP

4P-4296 DAMPER & PULLEY GP
S/N 4CK171-381
9.5 INCH DIAMETER
i00376266 SEBP1991
4P4296 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-9605 [1] PULLEY-CRANKSHAFT  
2. 108-4096 C [1] DAMPER AS  
3. 2B-6030 [6] BOLT (5/8-18X6-IN)  
4. 4D-3704 [6] WASHER-HARD (17X30X5-MM THK)  
5. 7C-6354 [1] SPACER (89.03X163.6X12.7-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP19910129
 

4P-7491: DAMPER & PULLEY GP

4P-7491 DAMPER & PULLEY GP
9.5 INCH DIAMETER
i00540272 SEBP1991
4P7491 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-7490 [1] PULLEY-CRANKSHAFT  
2. 167-8126 [1] DAMPER AS  
3. 2B-6030 [6] BOLT (5/8-18X6-IN)  
4. 168-2100 [1] SPACER (131.57X163.6X8-MM THK)  
5. 7C-6354 [1] SPACER (89.03X163.6X12.7-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Truck Engine News
Separate Valve Stem Gauges Available
1982/06/23
Engine Valve Stem "use Again " Specifications
1983/03/02
New Liner Seat Insert Available
1983/08/31
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/11/07
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Improved Head Gasket Used; Service Tips
1990/02/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Cylinder Heads Have Additional Coolant Passages
1992/06/01
New Liner Seat Inserts Available
1992/11/01
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used and New Cylinder Liner Projection Measurement Method
1992/11/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/01/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/22
New Intake And Exhaust Valves Used{1105,1100}
1994/06/24
New Water Seals Used in 3400 Head Assemblies{1124}
1994/08/30
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/01
Service Cylinder Head Assemblies Have Round Exhaust Ports{1100,1101}
1995/07/01
New And Reconditioned Valve Projection Specifications{1105}
1995/08/01
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/10/01
Reman Cylinder Head Kits Are Now Available {1100}
2001/02/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/01
Improved Reman Cylinder Heads Are Now Used on Certain 3406 Mechanical Engines {1100, 1101}
2012/04/24
Replace the Cylinder Head Water Seals in Precious Metal Overhaul Kits Available for Certain On-Highway Truck Engines {1100}
Replace the Cylinder Head Water Seals in Precious Metal Overhaul Kits Available for Certain On-Highway Truck Engines {1100}
Engine News
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Replacement Procedure:
Replacement Procedure:
Specifications
Intake Valve Timing
3406B (PEEC III) TRUCK ENGINE
Cylinder Head
3406B (PEEC III) TRUCK ENGINE
Cylinder Head Valves
3406C (PEEC III) Truck Engine
Cylinder Head
3406C (PEEC III) Truck Engine
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
DISCONTINUATION OF REMAN CYLINDER HEAD KITS 0R7744 & 0R7745 FOR 3406B AND 3406C ENGINES
DISCONTINUATION OF REMAN CYLINDER HEAD KITS 0R7744 & 0R7745 FOR 3406B AND 3406C ENGINES
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Nozzles And Adapters
3406B DIESEL TRUCK ENGINE (PEEC III)
Cylinder Head Assembly
3406B DIESEL TRUCK ENGINE (PEEC III)
Valves
3406B DIESEL TRUCK ENGINE (PEEC III)
Valve Seat Inserts
3406B DIESEL TRUCK ENGINE (PEEC III)
Bridge Dowels
3406B DIESEL TRUCK ENGINE (PEEC III)
Valve Guides
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Nozzles And Adapters
3406C (PEEC III) TRUCK ENGINE
Cylinder Head Assembly
3406C (PEEC III) TRUCK ENGINE
Valves
3406C (PEEC III) TRUCK ENGINE
Valve Seat Inserts
3406C (PEEC III) TRUCK ENGINE
Bridge Dowels
3406C (PEEC III) TRUCK ENGINE
Valve Guides
3406C (PEEC III) TRUCK ENGINE
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Cylinder Heads Have Additional Coolant Passages{1101,1100}
1992/06/29
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence{1124,1221,1216}
1992/11/16
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04
124-0662 Impact Socket For Removing And Installing Cylinder Head Bolts{1100,0602}
1996/12/09
124-9057 Guide (Swirl) Collar Quickly Installs Valve Guides To Proper Height{1104,0701}
1996/12/09

Caterpillar Parts SIS Catalog 3406B :

CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
CYLINDER HEAD GP
7E-0970 CYLINDER HEAD GP
CYLINDER HEAD GP
7C-0041 CYLINDER HEAD GP
CYLINDER HEAD GP
7C-0041 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
115-2363 CYLINDER HEAD GP
CYLINDER HEAD GP
7E-3706 CYLINDER HEAD GP
CYLINDER HEAD GP
7E-9580 CYLINDER HEAD GP
CYLINDER HEAD GP
7E-9908 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
DAMPER & PULLEY GP
4P-4291 DAMPER & PULLEY GP
DAMPER & PULLEY GP
4P-4292 DAMPER & PULLEY GP
DAMPER & PULLEY GP
4P-4296 DAMPER & PULLEY GP

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.