391-8604 KIT-GASKET -CENTRAL, LOWER STRUCTURE S/N 8TD3150-UP FIELD INSTALLATION D6E SR TRACK-TYPE TRACTOR

Part No	Qty	Parts name
8C-3445	[1]	CAP-DUST
2A-3398	[2]	GASKET
2A-3541	[1]	GASKET
6H-8778	[1]	GASKET
2P-8746	[1]	GASKET
2W-4561	[1]	GASKET
4M-6480	[1]	GASKET
5S-8055	[2]	GASKET
7F-7590	[1]	GASKET
4N-0699	[1]	GASKET
8N-6854	[1]	GASKET
9Y-6860	[1]	GASKET
169-4200	[1]	GASKET
169-4199	[1]	GASKET-OIL PAN
061-9458	[1]	SEAL-O-RING
2M-9780	[3]	SEAL-O-RING
3J-1907	[1]	SEAL-O-RING
3J-7354	[2]	SEAL-O-RING
3K-0360	[2]	SEAL-O-RING
4M-8303	[1]	SEAL-O-RING
8L-2786	[2]	SEAL-O-RING
8M-5248	[2]	SEAL-O-RING
8M-5253	[1]	SEAL-O-RING
9M-4849	[1]	SEAL-O-RING
114-2687	[1]	SEAL-O-RING
121-0145	[2]	SEAL-O-RING

#SEBP19950381

392-3548: KIT-GASKET

KIT-GASKET

392-3548 KIT-GASKET -SINGLE CYLINDER HEAD
S/N 8TD3150-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS, DOES NOT INCLUDE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FIELD INSTALLATION

i06732379 SEBP1995

For full view, you need register

Parts for your D6E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1P-0451	[1]	GASKET
1S-4295	[2]	GASKET (TURBOCHARGER)
2A-3541	[1]	GASKET
4M-6480	[1]	GASKET
5S-6735	[3]	GASKET
7N-0200	[1]	GASKET
7N-0944	[1]	GASKET
8H-9788	[1]	GASKET
188-6126	[1]	GASKET
111-8015	[1]	GASKET AS-CYLINDER HEAD
2P-6132	[1]	GASKET-ELBOW
1N-9372	[1]	GASKET-FLANGE (AIR INLET)
9S-7083	[1]	GASKET-INLET
9Y-1979	[3]	GASKET-MANIFOLD
115-7550	[1]	GASKET-PLATE
391-2167	[4]	LOCKNUT-FLANGE (3/8X16-THD)
7N-8018	[6]	SEAL
9Y-1798	[18]	SEAL
2M-9780	[1]	SEAL-O-RING
3J-1907	[1]	SEAL-O-RING
3J-7354	[1]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
3S-5496	[2]	SEAL-O-RING
5H-7704	[2]	SEAL-O-RING
5M-5860	[2]	SEAL-O-RING
6L-1648	[2]	SEAL-O-RING
8H-2046	[1]	SEAL-O-RING
8M-4448	[1]	SEAL-O-RING
9M-4849	[1]	SEAL-O-RING
133-1247	[1]	SEAL-VALVE COVER
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP19950382

392-8139: KIT-GASKET

KIT-GASKET

392-8139 KIT-GASKET
S/N 8FJ1-UP
CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS
FIELD REPLACEMENT FOR 6V-0900 KIT-GASKET
FIELD INSTALLATION

i05333930 SEBP1995

For full view, you need register

Parts for your D6E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
7L-3195	[3]	BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)
1P-0451	[1]	GASKET (TURBOCHARGER)
2F-7761	[1]	GASKET
1P-1255	[1]	GASKET-OIL DRAIN
2N-2766	[4]	LOCKNUT (3/8-16-THD)
2M-9780	[1]	SEAL-O-RING
3J-7354	[1]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
5H-7704	[2]	SEAL-O-RING
8M-5253	[1]	SEAL-O-RING
9M-4849	[1]	SEAL-O-RING
516-5987	[1]	STUD-TAPERLOCK (3/8-16X1.77-IN)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

#SEBP19950383

5P-8768: KIT-GASKET

KIT-GASKET

5P-8768 KIT-GASKET -SINGLE CYLINDER LINER
S/N 8FJ1-UP
FIELD INSTALLATION

i05089969 SEBP1995

For full view, you need register

Parts for your D6E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
2W-6134	[1]	BAND-FILLER
393-1024	[1]	KIT-GASKET (SINGLE CYLINDER LINER)
167-0024	[1]	SEAL-LINER
456-5581	[3]	SEAL-O-RING

#SEBP19950384

8C-8745: KIT-GASKET

KIT-GASKET

8C-8745 KIT-GASKET -REAR STRUCTURE
S/N 8FJ1-UP
FIELD INSTALLATION

i05333998 SEBP1995

For full view, you need register

Parts for your D6E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1M-7341	[1]	BOLT-LOCKING
4H-7869	[1]	GASKET
9H-5921	[1]	GASKET
0L-1124	[1]	GASKET-PLUG
7C-4297	[1]	SEAL GP-CRANKSHAFT
5F-3106	[1]	SEAL-O-RING
9M-5894	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED

#SEBP19950385

5Y-1924: PLATE & FILM GP

PLATE & FILM GP

5Y-1924 PLATE & FILM GP
S/N 8FJ1-UP
PART OF 5Y-1967 CHASSIS AR

i00386266 SEBP1995

For full view, you need register

Parts for your D6E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
Y	[1]	FILM GP

3N-3790 A	[1]	PLATE-SERIAL NUMBER (ENGINE)
		INSTALL ON TOP OF VALVE COVER ASSEMBLY AS FAR FORWARD AS POSSIBLE
8H-8648	[1]	PLATE-INSTRUCTION (DISCONNECT SWITCH)
		ON KEY SWITCH
9L-6531 A	[1]	PLATE-INFORMATION (ENGINE RATING)
		ON TOP FRONT OF VALVE COVER
9X-6198	[1]	PLATE-PRODUCT IDENT NUMBER (STANDARD)
		ON REAR FACE OF STEERING & BEVEL GEAR HOUSING

4B-4158	[16]	SCREW-DRIVE (NO 4X0.25-IN)

1P-2807	[4]	FILM-IDENTIFICATION (LIFT EYE LOCATION)
		2-ON TRACK ROLLER FRAME BEHIND CENTERLINE OF TRACK IDLER SHAFT (ONE EACH SIDE)
		2-TOWARD REAR ON SIDE OF RIPPER FRAME (ONE EACH SIDE)
5P-9673	[1]	FILM-INSTRUCTION (PARKING BRAKE LOCK)
		ON VERTICAL SURFACE ADJACENT TO THE PARKING BRAKE LEVER
7X-7644	[8]	FILM-IDENTIFICATION (TIE-DOWN)
		2-ON TRACK ROLLER FRAME BEHIND CENTERLINE OF TRACK IDLER SHAFT (ONE EACH SIDE)
		2-ON TRACK ROLLER FRAME IN FRONT OF CENTERLINE OF TRACK IDLER SHAFT (ONE EACH SIDE)
		1-ON FRONT PULL HOOK (NOT REQUIRED ON MACHINES WITHOUT PULL HOOK
		2-ON TRACK ROLLER FRAME ON CENTERLINE OF IDLER & SPROCKET CENTERED BETWEEN THEM (ONE EACH SIDE)
		1-ON REAR NEXT TO HITCH OR DRAWBAR (NOT REQUIRED ON MACHINES WITHOUT HITCH OR DRAWBAR)
9X-6680	[1]	FILM-NOTICE
		ON RH SIDE OF RADIATOR GUARD
134-3589	[1]	FILM-INFORMATION (FUEL FILTER)
		ON INSIDE OF RADIATOR DOOR
A		NOT PART OF THIS GROUP
Y		SEPARATE ILLUSTRATION

#SEBP19950386

8H-4933: PLATE & FILM GP

PLATE & FILM GP

8H-4933 PLATE & FILM GP
S/N 4EP1-UP; 54U1-UP
PART OF 111-4035, 2Y-7001, 5Y-2218 BULLDOZER AR-ANGLING
AN ATTACHMENT

i00707601 SEBP1995

For full view, you need register

Parts for your D6E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
2Y-9790	[1]	PLATE-SERIAL NUMBER
		(ON UPPER RH CORNER OF BLADE)
4B-4158	[2]	SCREW-DRIVE (NO 4X0.25-IN)

#SEBP19950387

1N-4296: PROTECTION GP-VANDALISM

PROTECTION GP-VANDALISM

1N-4296 PROTECTION GP-VANDALISM
S/N 8FJ1-UP
OIL FILLER CAP
AN ATTACHMENT

i00352452 SEBP1995

1N4296 PROTECTION GP-VANDALISM Parts scheme

For full view, you need register

Parts for your D6E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2Y-4071	[1]	PADLOCK (INCLUDES 2 KEYS)
2.	8S-4212	[2]	RIVET
3.	8S-3746	[2]	COVER-FILLER CAP
4.	7W-1484	[1]	CAP AS-OIL FILLER
	6H-0411	[1]	WASHER (32.5X50.8X1.6-MM THK)

#SEBP19950388

2Y-2578: TOOL GP-HAND

TOOL GP-HAND

2Y-2578 TOOL GP-HAND
S/N 8FJ1-UP
AN ATTACHMENT

i00361537 SEBP1995

For full view, you need register

Parts for your D6E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2Y-8280	[1]	TOOL GP-HAND
	4C-9605	[1]	WRENCH (5/16-IN)
	4C-9592	[1]	WRENCH-COMBINATION (3/8-IN)(3/8 IN)
	4C-9594	[1]	WRENCH (1/2-IN)
	4C-9595	[1]	WRENCH (9/16-IN)
	4C-9596	[1]	WRENCH-COMBINATION (5/8-IN)(5/8 IN)
	4C-9598	[1]	WRENCH (3/4-IN)
	4C-9601	[1]	WRENCH (7/8-IN)
	4C-9603	[1]	WRENCH (1-IN)
2.	1S-0259	[1]	SOCKET (1/2 IN)
	8H-8549	[1]	SOCKET (1/2-IN)(9/16 IN)
	2Y-2577	[1]	SOCKET (5/8 IN)
	8H-8554	[1]	SOCKET (7/8-IN)(7/8 IN)
	8H-8555	[1]	SOCKET (1/2-IN)(15/16 IN)
	8H-8556	[1]	SOCKET (1 IN)
	9S-1730	[1]	SOCKET (1-1/8-IN)(1 1/8 IN)
3.	1P-5518	[1]	SCREWDRIVER
4.	1P-5521	[1]	SCREWDRIVER-PHILLIPS
5.	8H-8559	[1]	EXTENSION AS (1/2-IN DRIVE)(1/2 IN DRIVE-10 IN LONG)
6.	213-1985	[1]	HANDLE (SLIDING TOOTH)
7.	8F-9866 Y	[1]	GREASE GUN GP
8.	8H-8581	[1]	GAUGE GP-FEELER
9.	5F-4764	[1]	BAR-PRY
10.	212-8146	[1]	SOCKET (DRAIN PLUG)
11.	185-3630	[1]	WRENCH AS-STRAP
	2P-8253	[1]	STRAP
	6H-7378	[1]	RING-RETAINING
12.	1P-0551	[1]	PIN-SPRING
13.	212-8145	[1]	SOCKET-SPECIAL (DRAIN PLUG)
	Y		SEPARATE ILLUSTRATION