108-3916 CYLINDER BLOCK GP S/N 4JK1-98 FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@ 3406B GEN SET ENGINE

BASIC ENGINE

CYLINDER BLOCK GP

0. 108-3916 CYLINDER B
1. 152-7642 CYLINDER B
2. 152-7644 CYLINDER B
3. 8N-9267 CYLINDER B

CYLINDER HEAD GP

4. 9Y-3775 CYLINDER H
5. 4W-2436 CYLINDER H
6. 4W-2436 CYLINDER H
7. 7W-2203 CYLINDER H

DAMPER GP

8. 4P-9183 DAMPER & P

DRIVE GP-ACCESSORY

9. 8N-9653 DRIVE GP-A
0. INFORMATION

GEN SET ENGINE 3406B GEN SET ENGINE 4JK
3406B Generator Set Engine 4JK00001-00098 SEBP2000 3406B 4JK (1991)

BASIC ENGINE

CYLINDER BLOCK GP

1W-5107 COVER GP-CYLINDER BLOCK

108-3914 CYLINDER BLOCK GP

108-3916 CYLINDER BLOCK GP

152-7642 CYLINDER BLOCK GP

152-7644 CYLINDER BLOCK GP

8N-9267 CYLINDER BLOCK GP

#SEBP20000010

108-3916: CYLINDER BLOCK GP

CYLINDER BLOCK GP

108-3916 CYLINDER BLOCK GP
S/N 4JK1-98
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@

i00123090 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-5155	[1]	SEAL-O-RING
2.	8T-6757	[3]	PLUG-PIPE
3.	7W-6534	[1]	PLUG-PIPE
4.	9S-8009	[3]	PLUG-O-RING
5.	8T-6763	[3]	PLUG-PIPE (1/4-18-THD)
6.	9S-4190	[2]	PLUG-O-RING (7/8-14-THD)
7.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
8.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
9.	030-7571	[4]	BOLT (3/8-16X1-IN)
10.	4W-8585	[1]	COVER
11.	7W-6081	[1]	GASKET
12.	9X-7378	[1]	SEAL-O-RING
13.	4N-6658	[1]	BUSHING (1.3-IN WIDE)
14.	4N-0685	[6]	BUSHING (1-IN WIDE)
15.	7X-7732	[6]	PLUG-PIPE
16.	114-4427	[2]	SEAL-O-RING
17.	8S-9094	[1]	PLUG-ORIFICE
18.	108-3914 Y	[1]	CYLINDER BLOCK GP
19.	3E-6747	[2]	SEAL-O-RING
20.	100-7399	[2]	PLUG
21.	9S-4182	[1]	PLUG (7/16-20-THD)
	Y		SEPARATE ILLUSTRATION

#SEBP20000011

152-7642: CYLINDER BLOCK GP

CYLINDER BLOCK GP

152-7642 CYLINDER BLOCK GP
S/N 4JK1-98
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@

i00729861 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-6757	[3]	PLUG-PIPE
2.	7W-6534	[1]	PLUG-PIPE
3.	152-7644 Y	[1]	CYLINDER BLOCK GP
4.	8T-6763	[3]	PLUG-PIPE (1/4-18-THD)
5.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
6.	119-5155	[1]	SEAL-O-RING
7.	030-7571	[4]	BOLT (3/8-16X1-IN)
8.	4W-8585	[1]	COVER
9.	7W-6081	[1]	GASKET
11.	8S-9094	[1]	PLUG-ORIFICE
12.	9S-4190	[2]	PLUG-O-RING (7/8-14-THD)
13.	114-4427	[2]	SEAL-O-RING
14.	8T-6767	[6]	PLUG-PIPE (3/8-18-THD)
15.	4N-0685	[6]	BUSHING (1-IN WIDE)
16.	4N-6658	[1]	BUSHING (1.3-IN WIDE)
17.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
18.	9S-8009	[1]	PLUG-O-RING
19.	100-7399	[2]	PLUG
20.	3E-6747	[2]	SEAL-O-RING
21.	9S-4182	[1]	PLUG (7/16-20-THD)
22.	9X-7378	[1]	SEAL-O-RING
	Y		SEPARATE ILLUSTRATION

#SEBP20000012

152-7644: CYLINDER BLOCK GP

CYLINDER BLOCK GP

152-7644 CYLINDER BLOCK GP
S/N 4JK1-98
PART OF 152-7642 CYLINDER BLOCK GP

i00734657 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
2.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
3.	4N-0795	[7]	CAP-CRANKSHAFT BEARING

#SEBP20000013

8N-9267: CYLINDER BLOCK GP

CYLINDER BLOCK GP

8N-9267 CYLINDER BLOCK GP
S/N 4JK1-98
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6-111-8606 BOLT-SPECIAL, 6-290-6567 TUBE AS-OIL JET

i00147398 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-4990	[6]	JET AS-PISTON COOLING
2.	8T-6757	[3]	PLUG-PIPE
3.	7M-7410 B	[1]	PLUG-PIPE
4.	2W-6000	[6]	LINER-CYLINDER BLOCK
5.	8T-6763	[3]	PLUG-PIPE (1/4-18-THD)
6.	1S-9540	[2]	DOWEL
7.	3S-5496	[2]	SEAL-O-RING
8.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
9.	030-7571	[4]	BOLT (3/8-16X1-IN)
10.	4W-8585	[1]	COVER
11.	7W-6081	[1]	GASKET
12.	2M-6471	[1]	PLUG-CUP
13.	4N-0683	[4]	DOWEL
14.	4N-1650	[2]	DOWEL
15.	6I-2981	[1]	PLATE-BLOCK
16.	6I-4024	[1]	GASKET-PLATE
17.	8S-9094	[1]	PLUG-ORIFICE
18.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
19.	2M-9780	[1]	SEAL-O-RING
20.	8T-6767	[6]	PLUG-PIPE (3/8-18-THD)
21.	7E-6479	[6]	BOLT-SPECIAL (OIL JET)
22.	4N-0685	[6]	BUSHING (1-IN WIDE)
23.	4N-6658	[1]	BUSHING (1.3-IN WIDE)
24.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
25.	9S-8009	[1]	PLUG-O-RING
26.	4K-1388	[1]	SEAL-O-RING
27.	110-2220	[18]	SEAL-LINER
28.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
29.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
30.	4N-5857	[7]	CAP-CRANKSHAFT BEARING
31.	9L-5854	[6]	BAND-FILLER (130.2-MM ID)
32.	4W-4588 AH		SLEEVE-LIFTER BORE
	4W-6061 AJ		SLEEVE
33.	9S-4190 B	[1]	PLUG-O-RING (7/8-14-THD)
34.	2M-9780 B	[1]	SEAL-O-RING
35.	100-7399	[1]	PLUG
36.	3E-6747	[1]	SEAL-O-RING

	5N-0093 AFH		INSERT-LINER SEAT (2.71-MM THK)
	6I-4365 ABFH		INSERT-LINER SEAT (2.66-MM THK)
	6I-4366 ABFH		INSERT-LINER SEAT (2.76-MM THK)
	2W-3815 AFH		INSERT-LINER SEAT (1.605-MM THK)
	6I-4363 ABFH		INSERT-LINER SEAT (1.555-MM THK)
	6I-4364 ABFH		INSERT-LINER SEAT (1.655-MM THK)
	9Y-3368 AFH		INSERT-LINER SEAT (0.822-MM THK)
	6I-4361 ABFH		INSERT-LINER SEAT (0.772-MM THK)
	6I-4362 ABFH		INSERT-LINER SEAT (0.872-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	H		FOR SALVAGE OF DAMAGED LIFTER BORES IN CYL BLOCK. QUANTITY TO BE DETERMINED BY USER.
	J		FOR SALVAGE OF THE BOTTOM LINER O-RING BORE. QUANTITY TO BE DETERMINED BY USER.

#SEBP20000014

9Y-3775: CYLINDER HEAD AS

CYLINDER HEAD AS

9Y-3775 CYLINDER HEAD AS
S/N 4JK1-98
PART OF 7W-2203 CYLINDER HEAD GP

i00158354 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-0645	[12]	PLUG-CUP
2.	4N-5893	[12]	INSERT-VALVE SEAT (INLET)(STANDARD)
	7C-7602 AB		INSERT-VALVE SEAT (0.13-MM OS, INLET)
	7C-7603 AB		INSERT-VALVE SEAT (0.25-MM OS, INLET)
	7C-7604 AB		INSERT-VALVE SEAT (0.51-MM OS, INLET)
	7C-7605 AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
3.	1W-5283	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	7C-5353 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
	7C-5354 AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
4.	2M-6471	[1]	PLUG-CUP
5.	3B-0623	[10]	PLUG-CUP
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#SEBP20000015

4W-2436: CYLINDER HEAD GP

CYLINDER HEAD GP

4W-2436 CYLINDER HEAD GP
S/N 4JK1-97

i00109099 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-2203 Y	[1]	CYLINDER HEAD GP
2.	6L-8562 C	[1]	STUD-TAPERLOCK (3/8-16X1.77-IN)
3.	7W-5435 C	[6]	ADAPTER-NOZZLE
4.	5H-7153	[6]	SEAL-O-RING
5.	4N-7253	[6]	GASKET-CHAMBER
6.	5F-4899	[12]	BOLT (3/8-16X5.5-IN)
7.	6L-7442	[6]	STUD-TAPERLOCK (5/16-18X1.08-IN)
8.	4W-1055	[24]	SEAL
9.	2H-3750	[20]	BOLT (3/4-16X7.5-IN)
10.	7E-6000	[1]	GASKET-CYLINDER HEAD
11.	3J-5390 C	[1]	PLUG (3/8-18-THD)
12.	5H-1504	[20]	WASHER-HARD (20X33.5X5-MM THK)
13.	3J-5389	[3]	PLUG (EXTERNAL)
14.	3J-5389 B	[1]	PLUG (EXTERNAL)(USE WITHOUT AIR COMPRESSOR)
15.	4S-6137	[11]	STUD-TAPERLOCK (3/8-16X3.1-IN)
16.	3S-5496	[2]	SEAL-O-RING
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP20000016

4W-2436: CYLINDER HEAD GP

CYLINDER HEAD GP

4W-2436 CYLINDER HEAD GP
S/N 4JK98-98

i00109100 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-2203 Y	[1]	CYLINDER HEAD GP
2.	3S-5496	[2]	SEAL-O-RING
3.	7W-5435	[6]	ADAPTER-NOZZLE
4.	5H-7153	[6]	SEAL-O-RING
5.	4N-7253	[6]	GASKET-CHAMBER
6.	5F-4899	[12]	BOLT (3/8-16X5.5-IN)
7.	6L-7442	[6]	STUD-TAPERLOCK (5/16-18X1.08-IN)
8.	4W-1055	[24]	SEAL
9.	9X-8904	[20]	BOLT
10.	6I-3066	[1]	GASKET-CYLINDER HEAD
11.	8T-6767	[1]	PLUG-PIPE (3/8-18-THD)
12.	5H-1504	[20]	WASHER-HARD (20X33.5X5-MM THK)
13.	7W-6492	[3]	PLUG-PIPE (1/2-14-THD)
14.	7W-6492 B	[1]	PLUG-PIPE (1/2-14-THD)
			(USE WITHOUT AIR COMPRESSOR)
15.	4S-6137	[12]	STUD-TAPERLOCK (3/8-16X3.1-IN)
	B		USE AS REQUIRED
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP20000017

7W-2203: CYLINDER HEAD GP

CYLINDER HEAD GP

7W-2203 CYLINDER HEAD GP
S/N 4JK1-98
PART OF 4W-2436 CYLINDER HEAD GP

i00109128 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-3775 CY	[1]	CYLINDER HEAD AS
2.	108-5902	[12]	VALVE-INLET
3.	2N-5775	[12]	DOWEL
4.	2A-4429	[48]	LOCK-RETAINER
5.	4W-2474	[24]	ROTOCOIL AS
6.	4W-2471	[24]	SPRING-VALVE
7.	106-1111	[12]	VALVE-EXHAUST
8.	173-7188	[24]	GUIDE-VALVE
9.	4W-2472	[24]	SPRING-VALVE
10.	4W-2473	[24]	WASHER-VALVE SPRING GUIDE
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP20000018

4P-9183: DAMPER & PULLEY GP

DAMPER & PULLEY GP

4P-9183 DAMPER & PULLEY GP
S/N 4JK1-98
4 GROOVE PULLEY

i00372385 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	177-9024	[1]	ADAPTER-DAMPER
2.	167-8126	[1]	DAMPER AS
3.	6N-7378	[1]	PULLEY-CRANKSHAFT (4-GROOVE)
4.	8S-4753	[6]	BOLT (5/8-18X8-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP20000019

8N-9653: DRIVE GP-ACCESSORY

DRIVE GP-ACCESSORY

8N-9653 DRIVE GP-ACCESSORY
S/N 4JK1-98

i00122480 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-0942	[1]	ADAPTER AS
	8N-9476	[1]	SLEEVE
	2M-2488	[3]	STUD-TAPERLOCK (3/8-16X3.59-IN)
	2M-1538	[3]	STUD-TAPERLOCK (3/8-16X1.6-IN)
	1M-3735	[1]	DOWEL
2.	1W-1898	[1]	GASKET
3.	8N-8259	[1]	GEAR AS-IDLER
	8N-8258	[1]	BUSHING
4.	8N-8256	[1]	PLATE-THRUST
5.	7W-4381	[1]	SHAFT-IDLER
6.	9S-8752	[6]	NUT-FULL (3/8-16-THD)
7.	5M-2894	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	147-0182	[2]	SEAL-O-RING
9.	8T-6765	[1]	PLUG-PIPE (1/4-18-THD)
10.	0L-2070	[5]	BOLT (3/8-16X2.25-IN)
11.	053-2294	[2]	BOLT-12 POINT HEAD (3/8-16X1.75-IN)

Information:

BASIC ENGINE

CYLINDER BLOCK GP

Truck Engine News

The Cylinder Liners Have a New Appearance {1216}
2005/03/01

Engine News

In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09

Inspection Marks On Bearings
1982/05/12

Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25

New Liner Seat Insert Available
1983/08/17

Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01

Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01

New Cylinder Liner Available
1986/02/01

3400 Engine Major Component Performance Guide Available
1987/07/01

Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In
1992/08/01

Cylinder Pack Puller Groups Improved
1993/01/01

Damper Requirements For Remanufactured Short Block
1993/08/01

Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01

New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/16

Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18

New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03

Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05

Change In Procedure To Check Main Bearing Clearance
1978/08/30

The Cylinder Liners Have a New Appearance {1216}
2005/03/14

A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/08/14

Special Instruction

Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}

Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}

Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}

Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}

Installation of the 3406B and 3406C Long Block Engines
Installation of the 3406B and 3406C Long Block Engines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}

Service Letter-NACD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Australia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-CFEL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-CSARL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Americas

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Brazil

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Truck/Ag/Marine

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Technical Information Bulletin

0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks

Liner Flange Breakage
Liner Flange Breakage

Specifications

Camshaft Bearings
3406 & 3406B GENERATOR SET ENGINE

Cylinder Block
3406 & 3406B GENERATOR SET ENGINE

Cylinder Liners
3406 & 3406B GENERATOR SET ENGINE

Cylinder Liner Projection
3406 & 3406B GENERATOR SET ENGINE

Connecting Rod And Main Bearing Journals
3406 & 3406B GENERATOR SET ENGINE

Tool Operating Manual

9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}

362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}

Service Letter-China

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Asia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Service Letter-APD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Disassembly and Assembly

Spacer Plate
3406B DIESEL ENGINE FOR GENERATOR SETS

Piston Cooling Tubes
3406B DIESEL ENGINE FOR GENERATOR SETS

Camshaft Bearings
3406B DIESEL ENGINE FOR GENERATOR SETS

Crankshaft Main Bearings
3406B DIESEL ENGINE FOR GENERATOR SETS

Cylinder Liners
3406B DIESEL ENGINE FOR GENERATOR SETS

Service Magazine

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

New Liner Seat Insert Available{1217}
1983/08/15

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

New Cylinder Block Groups Used{1201}
1984/10/01

Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15

New Cylinder Liner Available{1201}
1986/02/10

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

New Information On Reusable Cylinder Liners{1216}
1978/06/19

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21

Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26

Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16

Caterpillar Parts SIS Catalog 3406B :

108-3914 CYLINDER BLOCK GP

4N-0741 CRANKSHAFT GP

4N-4953 COVER GP-VALVE MECHANISM

1W-1395 COVER GP-FRONT HOUSING

4N-4792 COVER GP-FLYWHEEL HOUSING

1W-5107 COVER GP-CYLINDER BLOCK

4P-3359 COUPLING GP-GENERATOR

7W-3798 CAMSHAFT GP

152-7642 CYLINDER BLOCK GP

152-7644 CYLINDER BLOCK GP

8N-9267 CYLINDER BLOCK GP

9Y-3775 CYLINDER HEAD AS

4W-2436 CYLINDER HEAD GP

7W-2203 CYLINDER HEAD GP

4P-9183 DAMPER & PULLEY GP

Truck sale:

USD $25,000

1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California

USD $22,000

1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania

USD $35,000

1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas

USD $29,000

1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania

$29,000 USD

CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States