7N-8840 DRIVE GP-FAN S/N 4JK1-98 4 GROOVE-254MM DIAMETER PULLEY-.800 DRIVE RATIO AND BLOWER DRIVE FOR USAGE REFER TO CHART @@@@@ 4N-6973@@@@@ AN ATTACHMENT 3406B

7N-8840 DRIVE GP-FAN
S/N 4JK1-98
4 GROOVE-254MM DIAMETER PULLEY-.800 DRIVE RATIO AND BLOWER DRIVE
FOR USAGE REFER TO CHART @@@@@ 4N-6973@@@@@
AN ATTACHMENT

i00411166 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7X-3391	[4]	WASHER-HARD (13.5X32X6-MM THK)
2.	6V-8188	[2]	NUT (1/2-13-THD)
3.	2P-9084	[2]	STUD-TAPERLOCK (1/2-13X0.83-IN, 1/2-13X0.98-IN)
4.	8T-2502	[2]	BOLT (3/8-16X1.125-IN)
5.	9N-5120	[1]	BRACKET
6.	4N-2372	[1]	ADAPTER-BRACKET
7.	5R-1771	[1]	BOLT (3/8-16X5.5-IN)
8.	7X-0328	[2]	BOLT (1/2-13X3.5-IN)
9.	5S-9062	[1]	SPACER (35.032X50.8X15.88-MM THK)
10.	8T-9377	[6]	BOLT (3/8-16X2.25-IN)
11.	7N-8828	[1]	PULLEY-FAN DRIVE (4-GROOVE)
12.	7N-8827	[1]	HUB
13.	8N-5305	[1]	SPACER (35.6X47.62X43.74-MM THK)
14.	6N-6598	[1]	ADAPTER-FAN
15.	7X-7731	[1]	PLUG-PIPE (3/4-14-THD)
16.	5P-7979	[2]	BOLT-LOCKING (5/16-24X2.25-IN)
17.	7N-2900	[1]	RETAINER
18.	3L-1425	[1]	BALL BEARING
19.	9F-4446	[1]	SEAL-O-RING
20.	8H-9789	[1]	BALL BEARING
21.	5S-2106	[1]	SEAL-LIP TYPE
22.	6N-6656	[1]	V-BELT SET (INCLUDES 3-BELTS)(FAN DRIVE)
23.	6N-7688	[1]	BRACKET AS-FAN
23A.	4N-0684	[1]	DOWEL
23B.	1P-9946	[1]	SHAFT-FAN
24.	6U-1989	[1]	VALVE-RELIEF (FAN DRIVE)
25.	2D-4867	[1]	FITTING-GREASE (1/8-27 PTF)(FAN DRIVE)

#SEBP20000021

4N-6006: FASTENER GP-FRONT HOUSING

FASTENER GP-FRONT HOUSING

4N-6006 FASTENER GP-FRONT HOUSING
S/N 4JK1-98

i00158192 SEBP2000

4N6006 FASTENER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1A-2029	[3]	BOLT (3/8-16X1.125-IN)
	5M-2894	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
2.	4N-4107	[1]	PLATE
3.	1A-2029 B	[1]	BOLT (3/8-16X1.125-IN)
	5M-2894 B	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	B		USE AS REQUIRED

#SEBP20000022

7N-3060: FLYWHEEL GP

FLYWHEEL GP

7N-3060 FLYWHEEL GP
S/N 4JK1-98
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING

i00408972 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1601	[12]	BOLT (5/8-18X2.75-IN)
	4D-3704	[12]	WASHER-HARD (17X30X5-MM THK)
2.	7W-1248	[1]	FLYWHEEL AS
3.	4N-2514	[1]	GEAR (113-TEETH)

#SEBP20000023

8N-9246: GEAR GP-FRONT

GEAR GP-FRONT

8N-9246 GEAR GP-FRONT
S/N 4JK1-98

i00122478 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-5661	[1]	GEAR-OIL PUMP DRIVE (69-TEETH)
2.	1P-7346	[1]	WASHER-HARD (10.2X35X6-MM THK)
3.	0S-1571	[1]	BOLT (3/8-16X1.75-IN)
4.	1B-8705	[1]	KEY-WOODRUFF
5.	3G-2292	[5]	BOLT-LOCKING (3/8-16X0.87-IN)
6.	6I-0093	[1]	SHAFT-IDLER
7.	112-9217	[1]	PLATE-THRUST
8.	126-1756	[4]	BOLT-LOCKING (5/16-18X0.875-IN)
9.	2W-7455	[1]	GEAR AS-IDLER (105, 42-TEETH)
10.	131-7123	[1]	BUSHING
11.	1B-8705	[1]	KEY-WOODRUFF

#SEBP20000024

1N-3876: GUARD GP-BELT

GUARD GP-BELT

1N-3876 GUARD GP-BELT
S/N 4JK1-98
FOR USE WITH @@@@@ 7W-1340@@@@@
CANNOT BE USED WITH 60-AMPERE ALTERNATORS, BELT GUARDS
AN ATTACHMENT

i00352206 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	3H-7654	[2]	WASHER-HARD (13.5X22.5X3-MM THK)
2.	1N-3877	[1]	GUARD AS-ALTERNATOR

#SEBP20000025

8N-5941: HOUSING GP-FLYWHEEL

HOUSING GP-FLYWHEEL

8N-5941 HOUSING GP-FLYWHEEL
S/N 4JK1-98
PROVIDES ADDITIONAL MOUNTING HOLES AT THE HOUSING/BLOCK FACE

i00412261 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	155-5619 C	[1]	GASKET
2.	108-4744 C	[1]	HOUSING AS-FLYWHEEL
3.	165-3929	[8]	BOLT (3/8-16X1.5-IN)
4.	165-3931	[5]	BOLT (3/8-16X1.75-IN)
5.	5J-5793	[9]	BOLT-12 POINT HEAD (1/2-13X2-IN)
6.	5P-8245	[9]	WASHER-HARD (13.5X25.5X3-MM THK)
7.	8T-6765	[2]	PLUG-PIPE (1/4-18-THD)
8.	5F-0304	[1]	PLUG (FLYWHEEL HOUSING)
9.	7X-7731	[3]	PLUG-PIPE (3/4-14-THD)
10.	165-3934	[2]	BOLT (3/8-16X2.75-IN)
11.	2A-1162	[1]	GASKET
	C		CHANGE FROM PREVIOUS TYPE

#SEBP20000026

1W-1468: HOUSING GP-FRONT

HOUSING GP-FRONT

1W-1468 HOUSING GP-FRONT
S/N 4JK1-98

i00147046 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-1469	[1]	HOUSING AS-GEAR
1A.	3K-3256 C	[4]	STUD-TAPERLOCK (3/8-16X1.7-IN)
1B.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
1C.	4M-2743 BC	[3]	STUD-TAPERLOCK (3/8-16-THD)
1D.	4M-2743 B	[2]	STUD-TAPERLOCK (3/8-16-THD)
1E.	3K-3256 B	[1]	STUD-TAPERLOCK (3/8-16X1.7-IN)
			-OR-
	6H-0406 B	[1]	STUD-TAPERLOCK (3/8-16X1.968-IN)
2.	1A-2029	[4]	BOLT (3/8-16X1.125-IN)
3.	1W-1471	[1]	PLATE
4.	166-9142	[1]	GASKET
5.	166-9146	[1]	GASKET
6.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
7.	5P-4255	[8]	BOLT-LOCKING (3/8-16X1-IN)
8.	0L-1352	[2]	BOLT (3/8-16X3.25-IN)
9.	0T-0055	[3]	BOLT (3/8-16X4.25-IN)
10.	5M-2894	[18]	WASHER-HARD (10.2X18.5X2.5-MM THK)
11.	1N-3181	[2]	STUD-HOLLOW (3/8-16X1.476-IN)
	6B-2250	[2]	GASKET
12.	6N-0389	[1]	STUD (1/2-13X2.63-IN)
	4H-6145	[1]	GASKET
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP20000027

466-9532: KIT-ENGINE GASKET

KIT-ENGINE GASKET

466-9532 KIT-ENGINE GASKET -SINGLE CYLINDER HEAD
S/N 4JK1-98
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
PART OF 481-1237 KIT-ENGINE OVERHAUL
FIELD INSTALLATION

i06136550 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
2N-2765	[3]	BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)
1S-4295	[1]	GASKET (TURBOCHARGER)
2N-8204	[6]	GASKET
4N-0699	[1]	GASKET
6L-9589	[4]	GASKET
7C-0307	[1]	GASKET
4N-7253	[6]	GASKET-CHAMBER
6I-3066	[1]	GASKET-CYLINDER HEAD
129-9452	[6]	GASKET-EXHAUST MANIFOLD
1S-4810	[1]	GASKET-OIL DRAIN
1S-6595	[1]	GASKET-OIL SUPPLY
6I-4024	[1]	GASKET-PLATE
4N-1156	[1]	GASKET-REGULATOR COVER
2N-2766	[7]	LOCKNUT (3/8-16-THD)
5P-5678	[11]	SEAL
3E-6772	[24]	SEAL (WATER)
3S-9643	[2]	SEAL-LIP TYPE
109-0076	[1]	SEAL-O-RING
3S-5496	[4]	SEAL-O-RING
4L-8337	[2]	SEAL-O-RING
5P-7204	[2]	SEAL-O-RING
5S-1188	[2]	SEAL-O-RING
6V-3251	[1]	SEAL-O-RING
6V-3831	[1]	SEAL-O-RING
6V-9769	[4]	SEAL-O-RING
7L-4774	[6]	SEAL-O-RING
8C-5196	[1]	SEAL-O-RING
464-0509	[6]	SEAL-O-RING
109-0078	[2]	SEAL-O-RING
114-2687	[1]	SEAL-O-RING
203-3940	[6]	SEAL-O-RING
194-8124	[6]	SLEEVE AS (EXHAUST PORT)
313-9550	[4]	STUD-TAPERLOCK (3/8-16X2.165-IN)
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP20000028

471-1663: KIT-ENGINE GASKET

KIT-ENGINE GASKET

471-1663 KIT-ENGINE GASKET -AFTERCOOLER & LINES
S/N 4JK1-98
KIT CONTAINS GASKETS AND SEALS TO INSTALL THE AFTERCOOLER AND ATTACHING LINES
FOR USE WITH @@@@@6I-0368@@@@@
FIELD INSTALLATION

i06216294 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
2N-8204	[6]	GASKET
4N-0699	[1]	GASKET
4N-0933	[1]	GASKET
4N-4159	[1]	GASKET
6L-9589	[4]	GASKET
7W-0688	[2]	GASKET
153-5484	[2]	GASKET
4L-8337	[2]	SEAL-O-RING
5P-7204	[2]	SEAL-O-RING
5S-1188	[2]	SEAL-O-RING
6V-9769	[4]	SEAL-O-RING
109-0078	[2]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP20000029

479-7990: KIT-ENGINE GASKET

KIT-ENGINE GASKET

479-7990 KIT-ENGINE GASKET
S/N 4JK1-98
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS
FOR USE WITH @@@@@ 6I-0368@@@@@
FIELD INSTALLATION

i06240343 SEBP2000

For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
4N-0699	[4]	GASKET
7C-0307	[2]	GASKET
7W-6081	[1]	GASKET
188-0210	[1]	GASKET
165-6170	[3]	PLUG
5P-5846	[1]	SEAL-O-RING
5P-8068	[1]	SEAL-O-RING
5P-8210	[1]	SEAL-O-RING
9X-7378	[1]	SEAL-O-RING
114-4427	[1]	SEAL-O-RING
118-5068	[1]	SEAL-O-RING
119-5155	[1]	SEAL-O-RING
214-7566	[1]	SEAL-O-RING
214-7568	[4]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED