AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GPMANIFOLD GP-EXHAUST
TURBOCHARGER GP
FUEL SYSTEM
CONTROL GP-GOVERNORCONTROL GP-FUEL
CONTROL GP-GOVERNOR
PUMP GP-FUEL TRANSFER
GOVERNOR GP
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
#SEBP20000080
8N-9759: MOUNTING GP-AIR CLEANER
8N-9759 MOUNTING GP-AIR CLEANER
S/N 4JK1-98
CANNOT BE USED WITH WATERCOOLED MANIFOLDS
FOR USAGE REFER TO CHART @@@@@ 1N-3480@@@@@, @@@@@ 1N-3481@@@@@
AN ATTACHMENT
S/N 4JK1-98
CANNOT BE USED WITH WATERCOOLED MANIFOLDS
FOR USAGE REFER TO CHART @@@@@ 1N-3480@@@@@, @@@@@ 1N-3481@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3406B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9377 | [2] | BOLT (3/8-16X2.25-IN) | |
| 148-7017 | [2] | SPACER (10.2X19.05X13-MM THK) | ||
| 2. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 3. | 8N-8361 | [1] | BRACKET | |
| 4. | 8T-2502 | [2] | BOLT (3/8-16X1.125-IN) | |
| 6V-8801 | [2] | NUT (3/8-16-THD) | ||
| 5. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 6V-8188 | [4] | NUT (1/2-13-THD) | ||
| 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 6. | 1N-2984 | [1] | SUPPORT AS | |
| 7. | 7X-0347 | [4] | BOLT (5/8-11X2.25-IN) | |
| 8. | 8T-4122 | [4] | WASHER-HARD (17X32X3.5-MM THK) | |
| 9. | 2P-2216 | [4] | SPACER (0.641X1.125X0.750-IN THK) |
#SEBP20000081
9L-6671: SHIELD GP-MANIFOLD
9L-6671 SHIELD GP-MANIFOLD
S/N 4JK1-98
S/N 4JK1-98
For full view, you need register
#SEBP20000082
1W-3728: TURBOCHARGER GP
For full view, you need register
#SEBP20000083
1W-4209: TURBOCHARGER GP
1W-4209 TURBOCHARGER GP
S/N 4JK1-98
S/N 4JK1-98
For full view, you need register
Parts for your 3406B GEN SET ENGINE:
CATERPILLAR SIS#SEBP20000084
131-5455: CONTROL AS-GOVERNOR
131-5455 CONTROL AS-GOVERNOR
S/N 5CK1-UP
24-VOLT DC. WITH FUEL START LIMIT
PART OF 109-5265 PANEL AR-CONTROL
AN ATTACHMENT
S/N 5CK1-UP
24-VOLT DC. WITH FUEL START LIMIT
PART OF 109-5265 PANEL AR-CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your 3406B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP20000085
7E-8396: CONTROL GP-FUEL
7E-8396 CONTROL GP-FUEL -AUXILIARY
S/N 5CK1-UP
PART OF 109-5265 PANEL AR-CONTROL
AN ATTACHMENT
S/N 5CK1-UP
PART OF 109-5265 PANEL AR-CONTROL
AN ATTACHMENT
For full view, you need register
#SEBP20000086
1W-7411: CONTROL GP-GOVERNOR
1W-7411 CONTROL GP-GOVERNOR
S/N 4JK1-98
LH, VERNIER & POSITIVE LOCK
AN ATTACHMENT
S/N 4JK1-98
LH, VERNIER & POSITIVE LOCK
AN ATTACHMENT
For full view, you need register
Parts for your 3406B GEN SET ENGINE:
CATERPILLAR SIS#SEBP20000087
4N-3829: CONTROL GP-GOVERNOR
4N-3829 CONTROL GP-GOVERNOR
S/N 4JK1-98
POSITIVE LOCK & VERNIER
PART OF 1W-7411 CONTROL GP-GOVERNOR
AN ATTACHMENT
S/N 4JK1-98
POSITIVE LOCK & VERNIER
PART OF 1W-7411 CONTROL GP-GOVERNOR
AN ATTACHMENT
For full view, you need register
Parts for your 3406B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8L-4282 | [1] | HUB | |
| 2. | 4N-4523 | [1] | HANDLE AS | |
| 3. | 4W-2541 C | [1] | SHAFT | |
| 4. | 4W-2542 C | [1] | SPRING | |
| 5. | 4N-4520 | [1] | GUIDE | |
| 6. | 5K-0605 | [1] | PLUG | |
| 7. | 3N-3786 | [1] | ROD-THROTTLE CONTROL | |
| 8. | 6B-5150 | [2] | LOCKNUT | |
| 9. | 3N-3787 | [1] | BRACKET-CONTROL | |
| 10. | 4J-6750 | [1] | SPACER (21-MM THK) | |
| 11. | 2H-0210 | [1] | SPRING-SHUTOFF | |
| 12. | 4N-4519 | [1] | QUADRANT-CONTROL | |
| 13. | 1K-6539 | [1] | PIN | |
| 3B-4604 | [1] | PIN-COTTER | ||
| 14. | 6N-0775 C | [1] | RATCHET-GOVERNOR CONTROL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP20000088
4W-1727: COVER GP-FUEL TRANSFER
4W-1727 COVER GP-FUEL TRANSFER
S/N 4JK1-98
PART OF 7W-9662 MOUNTING GP-CONTACTOR
CANNOT BE USED WITH TACH DRIVE AND/OR SERVICE METER
AN ATTACHMENT
S/N 4JK1-98
PART OF 7W-9662 MOUNTING GP-CONTACTOR
CANNOT BE USED WITH TACH DRIVE AND/OR SERVICE METER
AN ATTACHMENT
For full view, you need register
Parts for your 3406B GEN SET ENGINE:
CATERPILLAR SIS#SEBP20000089
4P-1365: DRIVE GP-GOVERNOR & FUEL PUMP
4P-1365 DRIVE GP-GOVERNOR & FUEL PUMP
S/N 4JK1-98
S/N 4JK1-98
For full view, you need register
Parts for your 3406B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6H-3958 | [4] | BOLT-SOCKET HEAD (1/4-20X2.5-IN) | |
| 2. | 9X-7715 | [1] | SEAL-QUAD RING | |
| 3. | 1W-5438 | [1] | SPOOL | |
| 4. | 4W-0435 | [1] | SEAL-QUAD RING | |
| 5. | 4W-4617 | [1] | PLUG | |
| 6. | 4P-1369 | [1] | BODY-VALVE | |
| 7. | 4P-1368 | [1] | CARRIER-DRIVE | |
| 8. | 7W-3218 | [1] | RING-GUIDE | |
| 9. | 5H-0793 | [1] | RING-LOCK | |
| 10. | 6V-7543 | [4] | BOLT-12 POINT HEAD (3/8-16X3.25-IN) | |
| 11. | 009-3101 | [1] | RING-RETAINING | |
| 12. | 8T-7893 | [4] | BOLT (1/4-20X0.87-IN) | |
| 13. | 1W-5427 | [1] | SPRING | |
| 14. | 3K-3467 | [1] | NUT (7/8-20-THD) | |
| 15. | 7W-7663 | [1] | SCREW-ADJUSTMENT | |
| 16. | 3E-4301 | [1] | SETSCREW-SOCKET | |
| 17. | 8L-5832 | [1] | NUT-HEX (10-32-THD) | |
| 18. | 4P-1358 | [1] | SPRING | |
| 19. | 7N-7264 | [4] | WEIGHT-GOVERNOR | |
| 20. | 1S-5440 | [4] | DOWEL | |
| 21. | 1W-5434 | [1] | CARRIER-WEIGHT | |
| 22. | 1W-5441 | [1] | RETAINER AS-SPRING | |
| 23. | 5P-3383 | [4] | NUT-WELD | |
| 24. | 1W-5431 | [1] | RING-DRIVE | |
| 25. | 7W-0993 | [1] | GEAR-PUMP DRIVE (64-TEETH) | |
| 26. | 4N-2927 | [1] | RACE-THRUST BEARING | |
| 27. | 4W-4616 | [1] | SEAL-QUAD RING |
Information:
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
Special Instruction
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Specifications
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Service Magazine
