AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W2197 CRANKSHAFT GP 325 LN EXCAVATOR


BASIC ENGINE
CRANKSHAFT GP
CAMSHAFT GP
MOUNTING GP-ENGINE
PISTON & ROD GP
CYLINDER HEAD GP
VALVE MECHANISM GP

EXCAVATOR 325 LN EXCAVATOR 2SK
 325, 325L, 325LN EXCAVATORS 2SK00001-UP (MACHINE) POWERED BY 3116 ENGINE SEBP2005 325 LN 2SK   (2016)

BASIC ENGINE

CRANKSHAFT GP
SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
 

#SEBP20050010
 

4W-2197: CRANKSHAFT GP

4W2197 CRANKSHAFT GP
c606537 SEBP2005
4W2197 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-1725 [1] CRANKSHAFT AS  
2. 1B-8705 [1] KEY-WOODRUFF  
3. 2W-8147 M [1] GEAR  
4. 107-7602 [1] BEARING-THRUST  
  7C-6969 AB BEARING-THRUST 0.5MM OS  
  7C-6970 AB BEARING-THRUST 0.5MM US - 0.5MM OS  
  7C-6966 AB BEARING-THRUST 0.25MM US  
  7C-6967 AB BEARING-THRUST 0.5MM US  
  AB BEARING-THRUST 0.75MM US  
5. 101-1530 [3] BEARING-MAIN  
6. 107-7708 [3] BEARING-MAIN  
   
  7C-7980 AF [1] SLEEVE-OIL SEAL  
    (THIS WEAR SLEEVE IS
    USED ONLY TO SALVAGE
    (REPAIR) THE REAR SEAL
    SURFACE OF THE CRANKSHAFT)
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP20050011
 

2W-9608: CAMSHAFT GP

2W9608 CAMSHAFT GP-SINGLE
c593702 SEBP2005
2W9608 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-5426 R [1] CAMSHAFT AS  
2. 1B-8705 [1] KEY-WOODRUFF  
3. 7W-4070 [1] GEAR (100 TEETH)  
4. 107-7694 [1] PLATE-THRUST  
5. 6V-3940 M [2] BOLT (M8X1.25X25MM)  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP20050012
 

7Y-1280: MOUNTING GP-ENGINE

7Y1280 MOUNTING GP-ENGINE
c565184 SEBP2005
7Y1280 MOUNTING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-0427 [2] BRACKET AS-REAR  
2. 7X-2555 M [8] BOLT (M16X2.0X80MM)  
3. 9X-8257 [8] WASHER (3.50MM THK)  
4. 4I-7434 [4] MOUNT RUBBER  
5. 7Y-0432 [1] BRACKET AS-FRAME-RH  
6. 096-9655 M [4] BOLT  
7. 7X-0510 [8] WASHER-HARD  
8. 4I-7433 [4] MOUNT-RUBBER  
9. 7Y-0437 [1] BRACKET AS-FRAME-LH  
10. 8C-3425 M [4] BOLT  
11. 7Y-1734 [4] WASHER  
12. 7X-2566 M [4] BOLT (M20X2.5X110MM)  
13. 8T-4123 M [4] WASHER-PLATED (3.5MM THK)  
14. 7Y-1896 [4] SUPPORT AS  
    (EACH INCLUDES)
  7Y-1537 [1] LOCKNUT (M29X2.5 THD)  
  M   METRIC PART
 

#SEBP20050013
 

9Y-8543: PISTON & ROD GP

9Y8543 PISTON & ROD GP
ENGINE S/N 4TF3312-5108
c487580 SEBP2005
9Y8543 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-3226 [1] CROWN AS-PISTON  
2. 7C-2899 [1] RING-PISTON (TOP)  
3. 7E-5786 [1] RING-PISTON (INTERMEDIATE)  
4. 7C-5232 [1] RING-PISTON (OIL)  
5. 7C-0111 [2] RETAINER-PIN  
6. 7C-3901 [1] PIN-PISTON  
7. 2W-9128 R [1] ROD AS-CONNECTING  
8. 2W-0027 [1] BEARING  
9. 9N-3832 [2] BOLT-CONNECTING ROD  
10. 9L-7669 [2] NUT-CONNECTING ROD  
11. 7W-9415 [1] BEARING-CONNECTING ROD (STANDARD)  
  7C-6976 A [1] BEARING (.25MM)US  
  7C-6977 A [1] BEARING (.50MM)US  
12. 7E-9512 [1] SKIRT-PISTON  
  A   NOT PART OF THIS GROUP
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP20050014
 

100-3694: PISTON & ROD GP

1003694 PISTON & ROD GP
ENGINE S/N 4TF5109-UP
c538662 SEBP2005
1003694 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1512 [1] CROWN AS-PISTON  
2. 7C-2899 [1] RING-PISTON (TOP)  
3. 7E-5786 [1] RING-PISTON (INTERMEDIATE)  
4. 7C-5232 [1] RING-PISTON (OIL)  
5. 7C-0111 [2] RETAINER-PIN  
6. 7C-3901 [1] PIN-PISTON  
7. 2W-9128 R [1] ROD AS-CONNECTING  
8. 2W-0027 [1] BEARING  
9. 9N-3832 [2] BOLT-CONNECTING ROD  
10. 9L-7669 [2] NUT-CONNECTING ROD  
11. 7W-9415 [1] BEARING-CONNECTING ROD  
  7C-6976 A [1] BEARING (.25MM)US  
  7C-6977 A [1] BEARING (.50MM)US  
12. 7E-9512 [1] SKIRT-PISTON  
  A   NOT PART OF THIS GROUP
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP20050015
 

6I-4765: PISTON & ROD GP

6I4765 PISTON & ROD GP-16.7:1 RATIO
ENGINE S/N 4TF5109-UP
c563828 SEBP2005
6I4765 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1210 [1] CROWN AS-PISTON  
2. 105-1746 [1] RING-PISTON  
3. 7E-5786 [1] RING-PISTON  
    (INTERMEDIATE)
4. 7C-5232 [1] RING-PISTON (OIL)  
5. 7C-0111 [2] RETAINER-PIN  
6. 7C-3901 [1] PIN-PISTON  
7. 2W-9128 R [1] ROD AS-CONNECTING  
8. 2W-0027 [1] BEARING  
9. 9N-3832 [2] BOLT-CONNECTING ROD  
10. 9L-7669 [2] NUT-CONNECTING ROD  
11. 7W-9415 [1] BEARING-CONNECTING ROD  
    (STANDARD)
  7C-6976 A [1] BEARING (.25MM)US  
  7C-6977 A [1] BEARING (.50MM)US  
12. 4P-1549 [1] SKIRT-PISTON  
  A   NOT PART OF THIS GROUP
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP20050016
 

9Y-8871: CYLINDER HEAD GP

9Y8871 CYLINDER HEAD GP
9Y8850-PAGE 12
c534046 SEBP2005
9Y8871 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-9671 [3] SEAL-O-RING  
2. 9Y-8850 RY [1] CYLINDER HEAD GP  
3. 8T-0657 M [14] BOLT  
4. 8T-3282 [14] WASHER-HARD  
5. 2M-6471 [2] PLUG-CUP  
6. 4P-6930 [1] GASKET-CYLINDER HEAD  
    (1.60MM THK)
  4P-2590 AB [1] GASKET-CYLINDER HEAD  
    (1.85MM THK)
7. 8T-5030 M [6] BOLT  
8. 9S-8003 [3] PLUG-O-RING  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20050017
 

9Y-8850: CYLINDER HEAD GP

9Y8850 CYLINDER HEAD GP*R
PART OF 9Y8871 CYLINDER HEAD
c573282 SEBP2005
9Y8850 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3278 [1] CYLINDER HEAD AS  
2. 1W-2713 [6] INSERT-VALVE SEAT  
3. 7W-8065 [6] INSERT-SEAT  
4. 7W-5749 [6] SLEEVE  
5. 8M-5860 [6] PLUG-CUP  
6. 7W-8064 [6] VALVE-INLET  
7. 105-1779 [6] VALVE-EXHAUST  
8. 1W-2715 [24] LOCK-RETAINER  
9. 7E-7779 [12] RETAINER-SPRING  
10. 7C-4273 [12] SPRING-VALVE  
11. 4P-7750 [12] SEAL-V STEM  
12. 9Y-8848 [12] GUIDE-VALVE  
 

#SEBP20050018
 

2W-9607: VALVE MECHANISM GP

2W9607 MECHANISM GP-FUEL PUMP & VALVE
7C6077-PAGE 14
c568299 SEBP2005
2W9607 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-6077 Y [6] ROCKER ARM GP-VALVE  
2. 3E-9412 [6] DOWEL-BUSHING  
3. 8T-8442 M [12] BOLT-SOCKET HEAD  
4. 7C-6078 C [3] LIFTER GP  
    (EACH INCLUDES)
  4P-7738 [1] SHAFT AS-LIFTER  
  2D-6642 [2] BALL  
5. 7E-6794 [2] ARM AS-INJECTOR  
6. 7W-3989 C [4] ARM AS-LIFTER  
7. 7E-4199 [12] ROD-VALVE PUSH  
8. 4P-8577 [6] ROD AS-INJECTOR  
9. 6V-5223 M [23] BOLT  
10. 9X-6005 M [1] BOLT-LOCKING  
11. 7E-5984 [1] COVER-POWERSCREW  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20050019
 

7C-6077: ROCKER ARM GP

7C6077 ROCKER ARM GP-VALVE
TYPE 1
PART OF 2W9607 MECHANSIM-FUEL PUMP & VALVE
c496549 SEBP2005
7C6077 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-4832 M [2] SCREW-VALVE ADJUSTING  
2. 2Y-5829 M [2] NUT  
3. 9Y-8532 [1] SHAFT AS-ARM  
4. 9Y-8533 [1] SUPPORT-SHAFT  
5. 7M-5130 [1] PIN  
6. 7W-4137 [1] SHAFT AS  
7. 0L-1026 [1] PLUG-CUP  
8. 7W-3983 [1] RING-RETAINER  
9. 9Y-1582 [1] BUTTON-ARM  
10. 7W-4338 [2] ARM AS-ROCKER  
11. 9Y-4973 [1] SCREW-INJECTION ADJUST  
12. 7W-4117 M [1] NUT  
13. 9Y-3222 [1] ARM AS-UNIT INJ  
14. Z [1] BEARING-SLEEVE  
15. Z [1] SOCKET-ARM  
16. 7E-7922 [1] SUPPORT AS-SHAFT  
  9Y-8533 [1] SUPPORT-SHAFT  
17. 8S-0527 [1] PLUG-CUP  
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

Information:

Special Instruction
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Damper, Pulley & Crankshaft Front Seal
SUPPLEMENT FOR 3116 ENGINE 325, 325L, & 325N EXCAVATORS
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Wear Sleeve (Rear) - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Wear Sleeve (Rear) - Remove - If Equipped
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
New Rear Crankshaft Seal Groups Available{1161}
1994/10/17
Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/07
Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/09
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
There Is a New Maximum Temperature for 2W-8147 Gear {1204}
2003/08/04
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 325 LN :

SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
COVER GP-CYLINDER BLOCK
4W-2108 COVER GP-CYLINDER BLOCK
SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
9Y-1932 ENGINE AR
9Y-1932 ENGINE AR
7Y-0373 ENGINE AR
CAMSHAFT GP
2W-9608 CAMSHAFT GP
MOUNTING GP-ENGINE
7Y-1280 MOUNTING GP-ENGINE
PISTON & ROD GP
9Y-8543 PISTON & ROD GP
PISTON & ROD GP
100-3694 PISTON & ROD GP
PISTON & ROD GP
6I-4765 PISTON & ROD GP
CYLINDER HEAD GP
9Y-8871 CYLINDER HEAD GP
CYLINDER HEAD GP
9Y-8850 CYLINDER HEAD GP
VALVE MECHANISM GP
2W-9607 VALVE MECHANISM GP

Truck sale:

1992 CAT 325LN
USD $56,098 
1992 CAT 325LN

BIG MACHINERY BV
Velddriel, The Netherlands
1992 CAT 325LN
USD $53,180 
1992 CAT 325LN

BIG MACHINERY BV
Velddriel, The Netherlands
1994 CAT 325 LN
USD $29,000 
1994 CAT 325 LN

NASSER HEAVY EQUIP SALES
LAWERENCEVILLE, Georgia
 
USD $40,628 
1993 CAT 325LN

BIG MACHINERY BV
Velddriel, The Netherlands
 
$42,807 USD 
CATERPILLAR 325LN 1995
- TRACK EXCAVATORS
TEKNOXGROUP S.A.
Switzerland
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.