AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

874780 ROTATING GP-PUMP 874782-PAGE 182.01 PART OF 874718 PUMP-HYDRAULIC 325 LN EXCAVATOR


HYDRAULIC SYSTEM
PUMP GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
HYDRAULIC SYSTEM
LINES GP-PUMP
VALVE GP-CONTROL

EXCAVATOR 325 LN EXCAVATOR 2SK
 325, 325L, 325LN EXCAVATORS 2SK00001-UP (MACHINE) POWERED BY 3116 ENGINE SEBP2005 325 LN 2SK   (2016)

HYDRAULIC SYSTEM

PUMP GP
PUMP & MOUNTING GP
7Y-6020 PUMP & MOUNTING GP
PUMP & MOUNTING GP
7Y-0420 PUMP & MOUNTING GP
PUMP GP-PISTON
7Y-4002 PUMP GP-PISTON
PUMP GP-HYDRAULIC
087-4718 PUMP GP-HYDRAULIC
PUMP GP-GEAR
087-4727 PUMP GP-GEAR
ROTATING GP-PUMP
087-4781 ROTATING GP-PUMP
ROTATING GP-PUMP
087-4780 ROTATING GP-PUMP
ROTATING GP-PUMP
087-4782 ROTATING GP-PUMP
 

#SEBP20050260
 

087-4780: ROTATING GP-PUMP

874780 ROTATING GP-PUMP
874782-PAGE 182.01
PART OF 874718 PUMP-HYDRAULIC
c527315 SEBP2005
0874780 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 099-5865 [1] PLATE-VALVE  
2. 087-4782 Y [1] ROTATING GP-PUMP  
3. 099-5864 [1] SHAFT-PINION  
4. 9T-3873 [1] BEARING AS  
5. 9T-3876 [1] BEARING AS  
6. 9T-2004 [1] NUT-BEARING LOCK  
7. 9T-3376 B [1] SHIM (2.7MM THICK)  
  9T-3377 B [1] SHIM (2.8MM THICK)  
  9T-3378 B [1] SHIM (2.9MM THICK)  
  9T-3379 B [1] SHIM (3.0MM THICK)  
  9T-3380 B [1] SHIM (3.1MM THICK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP20050261
 

087-4782: ROTATING GP-PUMP

874782 ROTATING GP-PUMP
PART OF 874780 ROTATING PUMP
c652856 SEBP2005
0874782 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-3368 [4] SPRING-BELLEVILLE  
2. 087-4783 [1] CYLINDER  
3. 105-1516 [1] PLATE-RETAINING  
4. 105-1517 M [14] SCREW  
5. 9T-3369 [1] PIN-CENTER  
6. 099-5713 [7] PISTON  
7. 9T-3745 [14] RING  
8. 9T-3391 B [1] SPACER-SPRING (5.3MM THICK)  
  9T-3392 B [1] SPACER-SPRING (5.4MM THICK)  
  9T-3393 B [1] SPACER-SPRING (5.5MM THICK)  
  9T-3394 B [1] SPACER-SPRING (5.6MM THICK)  
  9T-3395 B [1] SPACER-SPRING (5.7MM THICK)  
  9T-3396 B [1] SPACER-SPRING (5.8MM THICK)  
  9T-3397 B [1] SPACER-SPRING (5.9MM THICK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP20050262
 

6C-6146: CONTROL GP-HYDRAULIC

6C6146 CONTROL GP-HYDRAULIC
875675-PAGE 207
PART OF 6C6209 CONTROL AR-AUXILIARY
AN ATTACHMENT
c549860 SEBP2005
6C6146 CONTROL GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1295 [1] RUBBER  
2. 6C-6344 [1] PEDAL AS  
3. 6C-6349 [1] FLOOR MAT  
4. 7Y-4717 [1] PIN  
5. 7Y-5704 [1] CHAIN AS-BALL  
6. 7Y-5753 [1] SUPPORT AS  
7. 7Y-5757 [1] PIN  
8. 8T-4121 [2] WASHER  
9. 8T-4195 M [2] BOLT  
10. 7I-8479 M [1] BOLT-SOCKET HEAD  
11. 087-5675 Y [1] VALVE GP-PILOT  
12. 8T-8894 M [2] BOLT-SOCKET HEAD  
13. 095-0735 M [2] SCREW-MACHINE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20050263
 

7Y-6009: CONTROL GP-HYDRAULIC

7Y6009 CONTROL GP-HYDRAULIC
TYPE 1
875675-PAGE 207
PART OF 6C6000 BOOM AR, 7Y6006, 7Y6004, 7Y6008 CONTROL ARS
AN ATTACHMENT
c549861 SEBP2005
7Y6009 CONTROL GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1296 [1] RUBBER  
2. 7Y-5751 [1] PEDAL AS  
3. 7Y-5753 [1] SUPPORT AS  
4. 7Y-5704 [1] CHAIN AS-BALL  
5. 7I-8479 M [1] BOLT-SOCKET HEAD  
6. 087-5675 Y [1] VALVE GP-PILOT  
7. 5I-7125 [1] FLOORMAT  
8. 8T-4195 M [2] BOLT  
9. 8T-8894 M [2] BOLT-SOCKET HEAD  
10. 8T-4121 [4] WASHER  
11. 7Y-4717 [1] PIN  
12. 095-0735 M [2] SCREW-MACHINE  
13. 7Y-5757 [1] PIN  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20050264
 

5I-7058: CONTROL GP-HYDRAULIC

5I7058 CONTROL GP-HYDRAULIC
TYPE 2
875675-PAGE 207
PART OF 7Y6008 CONTROL AR-AUXILIARY
AN ATTACHMENT
c547457 SEBP2005
5I7058 CONTROL GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1296 [1] RUBBER  
2. 7Y-5751 [1] PEDAL AS  
3. 7Y-5753 [1] SUPPORT AS  
  7Y-5226 M [1] NUT  
4. 7Y-5704 [1] CHAIN AS-BALL  
5. 7I-8479 M [1] BOLT-SOCKET HEAD  
6. 087-5675 Y [1] VALVE GP-PILOT  
7. 5I-7059 [1] FLOOR MAT  
8. 8T-4195 M [2] BOLT  
9. 8T-8894 M [2] BOLT-SOCKET HEAD  
10. 8T-4121 [4] WASHER  
11. 7Y-4717 [1] PIN  
12. 095-0735 M [2] SCREW-MACHINE  
13. 7Y-5757 [1] PIN  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20050265
 

7Y-3425: CONTROL GP-PILOT OPERATED HYD

7Y3425 CONTROL GP-PILOT OPERATED HYDRAULIC
c522994 SEBP2005
7Y3425 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 096-6332 [1] KNOB (LH)  
2. 4I-1317 [1] PLATE AS (LH)  
3. 4I-1297 [1] RUBBER (LH)  
4. 4I-1291 [1] RUBBER (LH)  
5. 095-0648 M [4] BOLT-SOCKET HEAD  
6. 8T-4121 [12] WASHER  
7. 8T-4137 M [8] BOLT  
8. 4I-1290 [1] RUBBER (RH)  
9. 4I-1292 [1] PLATE AS (RH)  
10. 4I-1298 [1] RUBBER (RH)  
11. 1R-5131 [2] NUT  
12. 4I-1283 [2] LEVER AS  
13. 095-0658 M [4] BOLT-SOCKET HEAD  
14. 099-4734 [2] BRACKET  
15. 096-6333 [1] KNOB (RH)  
16. 4I-1296 [1] RUBBER  
17. 4I-1284 [1] BRACKET AS  
18. 4I-1295 [1] RUBBER  
19. 4I-1287 [1] BRACKET AS  
  M   METRIC PART
 

#SEBP20050266
 

087-5076: LINES GP-PUMP

875076 LINES GP-PUMP
c644519 SEBP2005
0875076 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0400 [8] FLANGE-HALF  
2. 8T-4184 M [16] BOLT (M12X1.75X45MM)  
3. 8T-4223 [20] WASHER-HARD (3MM THK)  
4. 1P-3703 [4] SEAL-RECTANGULAR  
5. 4I-1792 I [1] HOSE AS  
6. 096-4883 M [3] LOCKNUT (M10X1.50 THD)  
7. 8T-4172 M [3] BOLT (M10X1.50X80MM)  
8. 8T-4121 [6] WASHER (2.5MM THK)  
9. 7Y-8055 [1] PLATE  
10. 7Y-8058 [2] CLAMP-DOUBLE  
11. 7Y-8059 [1] CHANNEL  
12. 7X-2553 M [4] BOLT (M16X2.0X40MM)  
13. 9X-8257 [8] WASHER (3.50MM THK)  
14. 4I-5861 [1] PIPE AS  
15. 5P-1979 [1] SEAL-O-RING  
16. 9S-4182 [1] PLUG (7/16-20 THD)  
17. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
18. 087-5472 [1] SUPPORT  
19. 8T-4192 M [2] BOLT (M12X1.75X25MM)  
20. 7Y-5225 [1] U-BOLT  
21. 096-4884 M [2] LOCKNUT (M12X1.75 THD)  
22. 8T-6726 [2] CLAMP-HOSE  
23. 111-1084 E HOSE (30 CM)  
24. 4I-1795 I [1] HOSE AS  
25. 4I-5860 [1] PIPE AS  
26. 7X-2475 M [4] BOLT (M16X2.0X130MM)  
27. 9F-7283 [1] SEAL-O-RING (107.32MM ID)  
  E   ORDER BY THE CENTIMETER
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP20050267
 

6E-5633: VALVE GP-MAIN CONTROL

6E5633 VALVE GP
6E5634-PAGE 188, 6E5639-PAGE 192, 6E4298-PAGE 203
6E4281-PAGE 203, 6E5933-PAGE 202
c527622 SEBP2005
6E5633 VALVE GP-MAIN CONTROL Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-5634 Y [1] VALVE GP-CONTROL  
2. 6E-5639 Y [1] VALVE GP-CONTROL  
3. 6E-4298 Y [1] VALVE GP-PRESSURE CONTROL  
4. 6V-5230 M [3] BOLT  
5. 6V-5686 M [4] BOLT  
6. 5P-8247 [4] WASHER-HARD  
7. 6E-4281 Y [1] VALVE GP-PRESSURE CONTROL  
8. 4J-9535 [6] SEAL  
9. 4J-5309 [6] SEAL-O-RING  
10. 1P-3702 [2] SEAL-RECTANGULAR  
11. 6V-0357 [2] SEAL-O-RING  
12. 6E-5933 Y [1] VALVE GP-RELIEF  
13. 4J-0519 [1] SEAL  
14. 6E-2157 [1] SPRING  
15. 6V-7981 M [4] BOLT  
16. 4B-4158 [1] SCREW  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20050268
 

6E-5634: VALVE GP-CONTROL

6E5634 VALVE GP-CONTROL-PART 1 OF 2
S/N 2SK1-191, 9SG1-173, 7LJ1-232
6E5635-PAGE 196
PART OF 6E5633 VALVE
c583862 SEBP2005
6E5634 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-5635 Y [1] VALVE GP (MAIN CONTROL)  
2. 6V-5597 [4] SEAL-O-RING  
3. 6E-2274 [2] COVER  
4. 6V-1820 M [4] BOLT  
5. 6V-5839 [8] WASHER  
6. 9S-4183 [1] PLUG  
  3D-2824 [1] SEAL-O-RING (23.47MM ID)  
7. 1T-0936 [2] PLUG-PIPE  
8. 9S-4191 [1] PLUG-O-RING  
9. 3J-1907 [2] SEAL-O-RING (11.89MM ID)  
10. 096-3044 [1] SEAL-O-RING  
11. 6E-5731 [1] VALVE (ATTCH LOAD CHECK)  
12. 7I-1248 [1] SPRING  
13. 6V-1819 M [2] BOLT  
14. 6E-2273 [2] HOUSING  
15. 4K-1388 [1] SEAL-O-RING (26.59MM ID)  
16. 6E-2151 [1] ADAPTER  
17. 4J-5309 [1] SEAL-O-RING  
18. 9S-4180 [2] PLUG-O-RING  
19. 4J-7533 [2] SEAL-O-RING  
20. 6E-4816 [2] PLUG GP  
  6E-2746 [1] PLUG GP  
  6E-2745 [1] SEAL  
  9T-4506 [1] PLUG  
  6E-4793 [1] PLUG GP  
  3D-2824 [1] SEAL-O-RING (23.47MM ID)  
  6E-4815 [1] PLUG  
  6M-5062 [1] SEAL-O-RING  
  9J-0705 [1] RING-BACK-UP  
21. 6E-5730 [1] PLUG  
22. 8T-0644 M [2] BOLT  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20050269
 

6E-5634: VALVE GP-CONTROL

6E5634 VALVE GP-CONTROL-PART 2 OF 2
S/N 2SK1-191, 9SG1-173, 7LJ1-232
5I4114-PAGE 198, 6E2914-PAGE 202
PART OF 6E5633 VALVE
c527861 SEBP2005
6E5634 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 325 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5597 [6] SEAL-O-RING  
2. 6E-2274 [3] COVER  
3. 6V-1820 M [6] BOLT  
4. 6V-5839 [12] WASHER  
5. 9S-4183 [1] PLUG  
  3D-2824 [1] SEAL-O-RING (23.47MM ID)  
6. 6E-5643 [1] VALVE (STICK II LOAD)  
7. 6E-5644 [1] PLUG  
8. 3J-1907 [1] SEAL (11.89MM ID)  
9. 5I-8478 [1] SPRING  
10. 5I-8480 [1] PLUG  
11. 6E-2273 [3] HOUSING  
12. 4T-3148 [1] SPRING  
13. 6E-5730 [2] PLUG  
14. 4K-1388 [4] SEAL-O-RING (26.59MM ID)  
15. 2S-2596 [2] SPRING  
16. 6E-5731 [2] VALVE (BOOM LOAD CHECK)  
17. 8T-0644 M [6] BOLT  
18. 9S-4191 [1] PLUG-O-RING  
19. 6E-2914 Y [3] VALVE GP-RELIEF (BOOM CYL)  
20. 5I-4114 Y [1] VALVE GP-RELIEF (NEG FLOW)  
21. 5I-8822 [1] VALVE GP (LOAD CHECK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Main Pump
325, 325L AND 325LN EXCAVATORS HYDRAULIC SYSTEM
Pilot Pump<BR> (Part Of Main Pump)
325, 325L AND 325LN EXCAVATORS HYDRAULIC SYSTEM
Pump Lines Group
325, 325L AND 325LN EXCAVATORS HYDRAULIC SYSTEM
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Disassembly and Assembly
Swivel Joint
325, 325L & 325N EXCAVATORS VEHICLE SYSTEMS
Main Hydraulic Pump &amp; Pump Drive Coupling
325, 325L & 325N EXCAVATORS VEHICLE SYSTEMS
Service Magazine
Procedure To Purge Air From Hydraulic Implement Pumps{0374}
1993/09/27
Information Release Memo PELE0401 Has Information About Remanufactured Hydraulic Piston Pump And Piston Motor Groups {0374,4134,4136,4351,5058,5070,5080,5314,5315,5473}
1994/12/26
Bolt Torque Specifications For Rebuilt Hydraulic Pumps {5070}
1995/03/06
New Adjustment Procedure Now Used During Rebuild Of Main Hydraulic Pumps{5070}
1995/08/28
New Control Piston Is Now Used In The Implement Hydraulic Pump{5070}
1995/11/27
New Gauge Block Set Available For Rebuilding Of Hydraulic Pumps and Motors{0733,0738,0763,4351,5070,5058}
1997/07/28
Serviceable Parts For Hydraulic Pilot System Pump {5073,5085}
1998/02/09
Serviceable Parts For Hydraulic Pilot System Pump{5073,5085}
1998/05/04
New Gear Pumps Have Improved Pressure Plates And Seals {5073}
1999/06/14
Corrections to Hydraulic and Electronic Systems Testing and Adjusting , "Main Pump Constant Horsepower Control Test and Negative Flow Control Test" {5050, 5070}
2002/05/27
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog 325 LN :

ROTATING GP-PUMP
087-4781 ROTATING GP-PUMP
HEAD GP-PUMP CONTROL
087-4754 HEAD GP-PUMP CONTROL
PUMP GP-GEAR
087-4727 PUMP GP-GEAR
HEAD GP-PUMP CONTROL
087-4740 HEAD GP-PUMP CONTROL
HEAD GP-PUMP CONTROL
087-4719 HEAD GP-PUMP CONTROL
PUMP GP-HYDRAULIC
087-4718 PUMP GP-HYDRAULIC
PUMP GP-PISTON
7Y-4002 PUMP GP-PISTON
VALVE GP-CHECK & RELIEF
4I-6301 VALVE GP-CHECK & RELIEF
ROTATING GP-PUMP
087-4782 ROTATING GP-PUMP
CONTROL GP-HYDRAULIC
6C-6146 CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC
7Y-6009 CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC
5I-7058 CONTROL GP-HYDRAULIC
CONTROL GP-PILOT OPERATED HYD
7Y-3425 CONTROL GP-PILOT OPERATED HYD
LINES GP-PUMP
087-5076 LINES GP-PUMP
VALVE GP-MAIN CONTROL
6E-5633 VALVE GP-MAIN CONTROL
VALVE GP-CONTROL
6E-5634 VALVE GP-CONTROL

Truck sale:

1992 CAT 325LN
USD $56,098 
1992 CAT 325LN

BIG MACHINERY BV
Velddriel, The Netherlands
1992 CAT 325LN
USD $53,180 
1992 CAT 325LN

BIG MACHINERY BV
Velddriel, The Netherlands
1994 CAT 325 LN
USD $29,000 
1994 CAT 325 LN

NASSER HEAVY EQUIP SALES
LAWERENCEVILLE, Georgia
 
USD $40,628 
1993 CAT 325LN

BIG MACHINERY BV
Velddriel, The Netherlands
 
$42,807 USD 
CATERPILLAR 325LN 1995
- TRACK EXCAVATORS
TEKNOXGROUP S.A.
Switzerland
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.