AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-7564 GOVERNOR GP-ELECTRONIC PART OF 4P-7565 PUMP GP-GOV & FUEL INJ 3406B TRUCK ENGINE


FUEL SYSTEM
GOVERNOR GP
FUEL SYSTEM GP
CONTROL GP-GOVERNOR
FILTER GP-FUEL
LINES GP-FUEL INJECTION

TRUCK ENGINE 3406B TRUCK ENGINE 4CK
 3406C Truck Engine (Electronic) 4CK00846-UP SEBP2012 3406B 4CK   (1991)

FUEL SYSTEM

GOVERNOR GP
CONTROL & HOUSING GP-GOVERNOR
4P-7563 CONTROL & HOUSING GP-GOVERNOR
DRIVE GP-GOVERNOR & FUEL PUMP
2W-4544 DRIVE GP-GOVERNOR & FUEL PUMP
GOVERNOR GP-ELECTRONIC
4P-7564 GOVERNOR GP-ELECTRONIC
LEVER GP-GOVERNOR CONTROL
4W-9590 LEVER GP-GOVERNOR CONTROL
PUMP GP-GOV & FUEL INJ
4P-7565 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-7565 PUMP GP-GOV & FUEL INJ
 

#SEBP20120580
 

4P-7564: GOVERNOR GP-ELECTRONIC

4P-7564 GOVERNOR GP-ELECTRONIC
PART OF 4P-7565 PUMP GP-GOV & FUEL INJ
i00371013 SEBP2012
4P7564 GOVERNOR GP-ELECTRONIC Parts scheme 4P7564 GOVERNOR GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-7563 Y [1] CONTROL & HOUSING GP-GOVERNOR  
2. 4W-2488 [1] GASKET  
3. 4W-2525 [1] HOUSING AS (RACK ACTUATOR)  
  6F-0984 [1] DOWEL  
4. 8B-2377 [1] BOLT (1/4-20X2-IN)  
5. 5P-0537 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 4W-2489 [1] GASKET  
7. 4W-2283 [1] COVER  
8. 4P-1751 [1] CLIP AS  
9. 4B-9365 [3] BOLT (1/4-20X3-IN)  
10. 6L-1559 [2] BOLT  
11. 2A-5546 [2] BOLT (1/4-20X1.375-IN)  
12. 4W-2372 [1] SHAFT  
13. 8S-7803 [1] RING-RETAINING  
14. 7W-9850 [1] SPRING  
15. 4W-2371 [1] LEVER  
16. 2M-7819 [1] RING-RETAINING  
17. 6V-5029 [1] SEAL-LIP TYPE  
18. 9F-6580 [3] BOLT (1/4-20X1.125-IN)  
19. 5P-0537 [9] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 7E-3502 [3] BOLT  
21. 4P-1367 [1] PISTON AS-SERVO  
  4P-1372 [1] PISTON-GOVERNOR SERVO  
  5P-9757 [1] SEAL-O-RING  
  7W-7809 [1] VALVE-GOVERNOR SERVO  
22. 2M-7819 [2] RING-RETAINING  
23. 1N-3800 [1] SLEEVE-RACK CONTROL  
24. 1N-3801 [1] SPRING-LINK  
25. 1N-3802 [1] SEAT-SPRING  
26. 1B-2717 [3] BOLT (1/4-20X5.5-IN)  
27. 4B-4909 J [1] SPRING  
28. 4P-9667 J [1] COLLAR  
29. 4W-2480 J [1] NUT  
30. 8S-4710 [1] BOLT (1/4-20X4-IN)  
31. 1B-2714 [1] BOLT (1/4-20X2.5-IN)  
32. 4W-9590 Y [1] LEVER GP-GOVERNOR CONTROL  
33. 2A-5546 [1] BOLT (1/4-20X1.375-IN)  
  J   USED WITH RACK POSITION SENSOR
  Y   SEPARATE ILLUSTRATION
 

#SEBP20120581
 

437-8112: KIT-FUEL SYSTEM GASKET

437-8112 KIT-FUEL SYSTEM GASKET
304.8 X 228.6 X 38.1 MM. CLASSIC
FIELD INSTALLATION
i07349832 SEBP2012
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP20120582
 

4W-9590: LEVER GP-GOVERNOR CONTROL

4W-9590 LEVER GP-GOVERNOR CONTROL
PART OF 4P-7564 GOVERNOR GP-ELECTRONIC
i00380715 SEBP2012
4W9590 LEVER GP-GOVERNOR CONTROL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-7836 [1] CLIP AS  
  8C-3334 [4] RIVET-TUBULAR  
2. 4W-6963 [1] CLAMP  
3. 4P-1351 [1] LEVER AS  
  6H-3956 [1] PIN  
4. 4W-6961 [1] SHAFT  
5. 4W-2484 [1] SPRING  
6. 1H-3340 [1] BOLT (10-24X1-IN)  
7. 4W-6962 [1] PLATE  
 

#SEBP20120583
 

4W-9379: LINES GP-FUEL FILTER

4W-9379 LINES GP-FUEL FILTER
PEEC-HIGH MOUNTED
i00675306 SEBP2012
4W9379 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-1047 I [1] HOSE AS  
2. 8S-0948 [1] CLIP  
3. 8T-2161 [1] ELBOW  
4. 6V-5049 [8] SEAL-O-RING  
5. 030-7947 [2] ADAPTER-ELBOW  
6. 2R-6806 [1] CONNECTOR  
7. 9N-5279 I [1] HOSE AS  
8. 8T-2160 [1] ELBOW  
9. 2P-7214 [3] ADAPTER-ELBOW  
10. 9S-4182 [1] PLUG (7/16-20-THD)  
11. 6V-5048 [1] SEAL-O-RING  
12. 4W-6841 I [1] HOSE AS  
13. 9S-8752 C [2] NUT-FULL (3/8-16-THD)  
  5M-2894 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  2M-4779 C [2] STUD-TAPERLOCK (3/8-16X1.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP20120584
 

7W-8788: LINES GP-FUEL FILTER

7W-8788 LINES GP-FUEL FILTER
i00417749 SEBP2012
7W8788 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-7947 [4] ADAPTER-ELBOW  
2. 3J-1907 [8] SEAL-O-RING  
3. 4W-9576 I [1] HOSE AS  
4. 4W-6993 [1] BRACKET AS  
  9F-2978 [2] NUT-WELD (3/8-16-THD)  
5. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
6. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
8. 6J-0488 [1] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
9. 2P-7214 [2] ADAPTER-ELBOW  
10. 1W-3151 [1] ELBOW  
11. 6N-1047 I [1] HOSE AS  
12. 107-2627 [1] ELBOW  
13. 4D-6434 [1] CLIP  
14. 7W-8857 I [1] HOSE AS  
15. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
  9S-4182 F [1] PLUG (7/16-20-THD)  
  3J-7354 F [1] SEAL-O-RING  
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP20120585
 

7W-8789: LINES GP-FUEL FILTER

7W-8789 LINES GP-FUEL FILTER
PEEC-LOW MOUNTED
i00417752 SEBP2012
7W8789 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
2. 1W-1652 [1] BRACKET-FILTER  
3. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
  9S-8752 [2] NUT-FULL (3/8-16-THD)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 9L-6958 I [1] HOSE AS  
5. 2R-6806 [1] CONNECTOR  
6. 3J-1907 [8] SEAL-O-RING  
7. 3S-8664 [1] CLIP (LOOP)  
8. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
9. 4V-6698 [1] SPACER (10X16X16-MM THK)  
10. 8T-2161 [1] ELBOW  
11. 030-7947 [1] ADAPTER-ELBOW  
12. 2P-7214 [3] ADAPTER-ELBOW  
13. 9S-4182 [1] PLUG (7/16-20-THD)  
  3J-7354 [1] SEAL-O-RING  
14. 030-7942 [1] ELBOW  
15. 4D-6434 [1] CLIP  
16. 7W-8856 I [1] HOSE AS  
17. 6N-1047 I [1] HOSE AS  
18. 8T-2160 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP20120586
 

4P-1927: LINES GP-FUEL INJECTION

4P-1927 LINES GP-FUEL INJECTION
i00168551 SEBP2012
4P1927 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9658 CY [1] LINES GP-FUEL INJECTION  
2. 4P-9659 CY [1] LINES GP-FUEL INJECTION  
3. 4P-9660 CY [1] LINES GP-FUEL INJECTION  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 7W-7040 [1] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 7W-4487 [1] WASHER-SPECIAL (9.76X17.14X1.27-MM THK)  
9. 9X-2836 [1] SCREW-BUTTON HEAD  
  8T-0659 [1] WASHER  
10. 7W-2315 [6] RETAINER  
11. 8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
12. 9L-9814 [6] LOCKNUT  
13. 4N-1292 [6] LOCK-ADAPTER  
14. 7C-9198 [3] BLOCK  
15. 4P-3946 [1] BRACKET  
16. 4P-3945 [2] BRACKET  
17. 0S-1615 [6] BOLT (1/4-20X0.75-IN)  
  5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 1A-9579 C [3] BOLT (5/16-18X1.5-IN)  
19. 0S-1618 [2] BOLT (5/16-18X1-IN)  
20. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
21. 054-4984 [1] SPACER (10X15X8.5-MM THK)  
22. 185-2831 [6] LINE AS-FUEL INJECTION  
    (EACH INCLUDES)
  8L-2779 [1] SEAL-O-RING  
23. 1B-2790 C [1] BOLT (5/16-18X1.375-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20120587
 

4P-1928: LINES GP-FUEL INJECTION

4P-1928 LINES GP-FUEL INJECTION
i00374289 SEBP2012
4P1928 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9658 CY [1] LINES GP-FUEL INJECTION  
2. 4P-9659 CY [1] LINES GP-FUEL INJECTION  
3. 4P-9660 CY [1] LINES GP-FUEL INJECTION  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 7W-7043 [6] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 7W-4487 [1] WASHER-SPECIAL (9.76X17.14X1.27-MM THK)  
9. 9X-2836 [1] SCREW-BUTTON HEAD  
  8T-0659 [1] WASHER  
10. 7W-2315 [6] RETAINER  
11. 8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
12. 9L-9814 [6] LOCKNUT  
13. 4N-1292 [6] LOCK-ADAPTER  
14. 7C-9198 [3] BLOCK  
15. 4P-3946 [1] BRACKET  
16. 4P-3945 [2] BRACKET  
17. 0S-1615 [6] BOLT (1/4-20X0.75-IN)  
  5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 1A-9579 C [3] BOLT (5/16-18X1.5-IN)  
19. 0S-1618 [2] BOLT (5/16-18X1-IN)  
20. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
21. 054-4984 [1] SPACER (10X15X8.5-MM THK)  
22. 7C-3427 [6] LINE AS-FUEL INJECTION  
23. 1B-2790 C [1] BOLT (5/16-18X1.375-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20120588
 

4P-1929: LINES GP-FUEL INJECTION

4P-1929 LINES GP-FUEL INJECTION
i00374291 SEBP2012
4P1929 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9658 CY [1] LINES GP-FUEL INJECTION  
2. 4P-9659 CY [1] LINES GP-FUEL INJECTION  
3. 4P-9660 CY [1] LINES GP-FUEL INJECTION  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 7W-7042 [1] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 7W-4487 [1] WASHER-SPECIAL (9.76X17.14X1.27-MM THK)  
9. 9X-2836 [1] SCREW-BUTTON HEAD  
  8T-0659 [1] WASHER  
10. 7W-2315 [6] RETAINER  
11. 8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
12. 9L-9814 [6] LOCKNUT  
13. 4N-1292 [6] LOCK-ADAPTER  
14. 7C-9198 [3] BLOCK  
15. 4P-3946 [1] BRACKET  
16. 4P-3945 [2] BRACKET  
17. 0S-1615 [6] BOLT (1/4-20X0.75-IN)  
  5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 1A-9579 C [3] BOLT (5/16-18X1.5-IN)  
19. 0S-1618 [2] BOLT (5/16-18X1-IN)  
20. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
21. 054-4984 [1] SPACER (10X15X8.5-MM THK)  
22. 185-2831 [6] LINE AS-FUEL INJECTION  
    (EACH INCLUDES)
  8L-2779 [1] SEAL-O-RING  
23. 1B-2790 C [1] BOLT (5/16-18X1.375-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20120589
 

4P-1930: LINES GP-FUEL INJECTION

4P-1930 LINES GP-FUEL INJECTION
i00374315 SEBP2012
4P1930 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9658 CY [1] LINES GP-FUEL INJECTION  
2. 4P-9659 CY [1] LINES GP-FUEL INJECTION  
3. 4P-9660 CY [1] LINES GP-FUEL INJECTION  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 7W-7041 [6] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 7W-4487 [1] WASHER-SPECIAL (9.76X17.14X1.27-MM THK)  
9. 9X-2836 [1] SCREW-BUTTON HEAD  
  8T-0659 [1] WASHER  
10. 7W-2315 [6] RETAINER  
11. 8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
12. 9L-9814 [6] LOCKNUT  
13. 4N-1292 [6] LOCK-ADAPTER  
14. 7C-9198 [3] BLOCK  
15. 4P-3946 [1] BRACKET  
16. 4P-3945 [2] BRACKET  
17. 0S-1615 [6] BOLT (1/4-20X0.75-IN)  
  5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 1A-9579 C [3] BOLT (5/16-18X1.5-IN)  
19. 0S-1618 [2] BOLT (5/16-18X1-IN)  
20. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
21. 054-4984 [1] SPACER (10X15X8.5-MM THK)  
22. 7C-3427 [6] LINE AS-FUEL INJECTION  
23. 1B-2790 C [1] BOLT (5/16-18X1.375-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Improved Locknut In Timing Advance On Fuel Pump And Governor Drive Group
1988/07/01
New Carrier Assembly Used In Governor And Fuel Pump Drive Groups
1992/06/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly.
1992/09/01
3406 Truck Engine Component Update
1992/10/01
Summery Of Changes To Timing Advance Drive Groups
1993/05/01
New Bonnet Used In Fuel Injection Pump Group
1993/06/01
Fuel Injection Pump Improvements{1251}
1994/01/01
Fuel Injection Pump Improvements{1251}
1994/04/22
Procedure For Lapping Sealing Surfaces Of Fuel Injection Pump Barrels And Bonnets{1251}
1994/06/24
Be Sure To Use The Correct Reverse Flow Check Valve{1251}
1994/07/01
Changing Complete Sets Of Fuel Injection Pump Groups May Not Fix Low Power Problems{1251}
1994/08/30
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance{1251}
1994/09/01
Electronic Timing Advance Improvements{1272,1253,1264}
1995/01/01
Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/27
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/01
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Australia
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-CFEL
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-CSARL
Service Letter-Americas
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Governor And Fuel Pump Drive Group (Timing Advance Unit)
3406B (PEEC III) TRUCK ENGINE
Governor and Fuel Pump Drive
3406C (PEEC III) Truck Engine
Service Letter-China
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Asia
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-APD
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Disassembly and Assembly
Timing Advance Unit
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pump Housing And Rack Actuator Package 1286-011
3406B DIESEL TRUCK ENGINE (PEEC III)
Rack Actuator Package
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pumps
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pumps
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Pump Housing
3406C (PEEC III) TRUCK ENGINE
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Carrier Assembly Used In Governor And Fuel Pump Drive Groups {1288,1299}
1992/08/10
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Fuel Injection Pump Improvements{1251}
1994/02/07

Caterpillar Parts SIS Catalog 3406B :

FITTING GP-FUEL LINES
7W-6973 FITTING GP-FUEL LINES
FITTING GP-FUEL LINES
4P-2182 FITTING GP-FUEL LINES
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
FILTER GP-FUEL
4N-1981 FILTER GP-FUEL
FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
2W-4544 DRIVE GP-GOVERNOR & FUEL PUMP
CONTROL & HOUSING GP-GOVERNOR
4P-7563 CONTROL & HOUSING GP-GOVERNOR
ADAPTER GP-PRIMING PUMP
9N-2722 ADAPTER GP-PRIMING PUMP
437-8112 KIT-FUEL SYSTEM GASKET
LEVER GP-GOVERNOR CONTROL
4W-9590 LEVER GP-GOVERNOR CONTROL
LINES GP-FUEL FILTER
4W-9379 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
7W-8788 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
7W-8789 LINES GP-FUEL FILTER
LINES GP-FUEL INJECTION
4P-1927 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-1928 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-1929 LINES GP-FUEL INJECTION

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.