AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-7681 PUMP GP-FUEL INJECTION S/N 4CK846-12168 PART OF 4P-1366 PUMP GP-FUEL INJECTION 3406B TRUCK ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
GOVERNOR GP
SHUTOFF GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING

TRUCK ENGINE 3406B TRUCK ENGINE 4CK
 3406C Truck Engine (Electronic) 4CK00846-UP SEBP2012 3406B 4CK   (1991)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
DRIVE GP-GOVERNOR & FUEL PUMP
2W-4544 DRIVE GP-GOVERNOR & FUEL PUMP
FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP
PUMP GP-FUEL INJECTION
107-7537 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
108-6634 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1366 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-7681 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
4P-7565 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-7565 PUMP GP-GOV & FUEL INJ
 

#SEBP20120600
 

4P-7681: PUMP GP-FUEL INJECTION

4P-7681 PUMP GP-FUEL INJECTION
S/N 4CK846-12168
PART OF 4P-1366 PUMP GP-FUEL INJECTION
i00147181 SEBP2012
4P7681 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1665 [1] BONNET-VALVE  
2. 4P-7688 [1] VALVE AS-CHECK (FUEL INJECTION PUMP)  
3. 8N-5993 [1] SPRING-FLOW CHECK  
4. 1N-3257 [1] RING-RETAINING  
5. 7E-6007 [1] PLUNGER & BARREL AS  
 

#SEBP20120601
 

4N-3287: PUMP GP-FUEL PRIMING

4N-3287 PUMP GP-FUEL PRIMING
FOR USE WITH @@@@@ 4N-1981@@@@@
ALSO AN ATTACHMENT
i00107921 SEBP2012
4N3287 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
3. 7X-2501 [1] BOLT (1/4-20X1.25-IN)  
4. 105-2508 [1] PUMP AS-FUEL PRIMING  
5. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP20120602
 

9N-3937: PUMP GP-FUEL PRIMING

9N-3937 PUMP GP-FUEL PRIMING
FORWARD FACING
ALSO AN ATTACHMENT
i00437426 SEBP2012
9N3937 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-5541 [1] PUMP GP-FUEL PRIMING  
2. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
3. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 1P-0436 [2] GASKET (FUEL PRIMING PUMP)  
5. 8B-2377 [1] BOLT (1/4-20X2-IN)  
6. 2B-2694 [1] BOLT (5/16-18X2-IN)  
7. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
8. 9L-6378 [1] ADAPTER-PRIMING PUMP  
9. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
 

#SEBP20120603
 

1W-1700: PUMP GP-FUEL TRANSFER

1W-1700 PUMP GP-FUEL TRANSFER
PART OF 2W-4381 PUMP & MTG GP-FUEL TRANSFER
i00121976 SEBP2012
1W1700 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-1698 [1] HOUSING-TRANSFER PUMP  
2. 1W-1699 [1] COVER  
3. 1W-5910 [1] GUIDE & TAPPET AS  
  7N-8821 [1] RING-RETAINING  
4. 6J-2419 [1] SEAL-O-RING  
5. 7E-2464 C [3] VALVE AS-CHECK (FUEL TRANSFER PUMP)  
6. 3D-2824 [1] SEAL-O-RING  
7. 6F-6672 [1] SEAL-O-RING  
8. 3D-2898 [1] SEAL-O-RING  
9. 5P-8215 [1] SEAL-O-RING  
10. 7W-0134 [1] SPRING-PUMP  
11. 8N-2637 [1] WASHER (21.3X29.5X1.6-MM THK)  
12. 7E-3667 C [1] SPACER (25.46X28.86X1.84-MM THK)  
13. 8N-2641 [1] SLEEVE  
14. 1W-1669 [1] PISTON  
15. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
16. 6D-8498 [2] SCREW-HEAD  
17. 8N-2640 [1] COVER  
18. 7E-4656 C [1] RETAINER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20120604
 

4P-7565: PUMP GP-GOV & FUEL INJ

4P-7565 PUMP GP-GOV & FUEL INJ
S/N 4CK846-12168
i00371014 SEBP2012
4P7565 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-1366 Y [1] PUMP GP-FUEL INJECTION  
2. 4P-7564 Y [1] GOVERNOR GP-ELECTRONIC  
3. 4W-2491 [1] GASKET  
4. 7F-8607 [1] SEAL-O-RING  
5. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
6. 9X-7793 [1] CONTROL GP-ELECTRONIC  
7. 105-2939 [1] SOLENOID-ROTARY  
  2H-3931 [1] SEAL-O-RING  
8. 3E-0076 [1] SOLENOID AS (4/28-VOLT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  8T-8737 [1] PLUG-SEAL  
9. 6V-1903 [1] SEAL-O-RING  
10. 4W-2482 [2] CLAMP  
11. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
12. 8M-2771 [1] CLIP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20120605
 

4P-7565: PUMP GP-GOV & FUEL INJ

4P-7565 PUMP GP-GOV & FUEL INJ
S/N 4CK12169-UP
i00371015 SEBP2012
4P7565 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-7537 CY [1] PUMP GP-FUEL INJECTION  
2. 4P-7564 Y [1] GOVERNOR GP-ELECTRONIC  
3. 4W-2491 [1] GASKET  
4. 7F-8607 [1] SEAL-O-RING  
5. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
6. 9X-7793 [1] CONTROL GP-ELECTRONIC  
7. 8M-2771 [1] CLIP  
8. 3E-0076 [1] SOLENOID AS (4/28-VOLT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  8T-8737 [1] PLUG-SEAL  
9. 6V-1903 [1] SEAL-O-RING  
10. 4W-2482 [2] CLAMP  
11. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
12. 105-2939 [1] SOLENOID-ROTARY  
13. 2H-3931 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20120606
 

2W-9161: SHUTOFF GP-MANUAL

2W-9161 SHUTOFF GP-MANUAL
FOR USE WITH PEEC GOVERNOR
AN ATTACHMENT
i00361288 SEBP2012
2W9161 SHUTOFF GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-9954 [1] LEVER  
2. 9F-6580 [1] BOLT (1/4-20X1.125-IN)  
 

#SEBP20120607
 

121-4134: ALTERNATOR GP-CHARGING

121-4134 ALTERNATOR GP-CHARGING
12-VOLT, 115-AMPERE
FIELD REPLACEMENT FOR @@@@@ 9X-6796@@@@@
i00482792 SEBP2012
1214134 ALTERNATOR GP-CHARGING Parts scheme 1214134 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-3244 [1] LOCKWASHER  
2. 6V-8189 [1] NUT (5/16-18-THD)  
3. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 3E-5451 [1] REGULATOR AS-VOLTAGE (12-VOLT)(ALTERNATOR)  
5. 9L-6770 [1] CAP-DUST  
6. 187-2034 [1] NUT-FLANGE (5/8-18-THD)  
7. 3E-5462 [1] KIT-ALTERNATOR TERMINAL (BATTERY)  
    (INCLUDES INSULATOR, LOCKWASHER, NUTS & TERMINAL)
8. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
9. 3F-9556 [1] LOCKWASHER  
10. 137-4937 [1] ROTOR AS-ALTERNATOR  
11. 3E-5450 [1] COVER  
12. 4B-2043 [4] NUT (8-32-THD)  
13. 9B-7233 [4] LOCKWASHER  
14. 3E-5448 [1] CONNECTOR  
15. 3E-5446 [1] CONNECTOR  
16. 3E-5457 [1] DIODE AS  
17. 231-6126 [1] RECTIFIER AS-ALTERNATOR  
18. 7N-9023 [3] SCREW AS (8-32X26.9-MM)  
19. 3E-5460 [1] HOLDER AS-BRUSH  
20. 3E-5459 [2] BRUSH AS-ALTERNATOR  
21. 3N-3718 [2] SCREW AS  
22. 3E-5458 [1] CAPACITOR AS-ALTERNATOR  
23. 4M-5281 [1] BOLT (1/4-20X0.75-IN)  
24. 3E-5454 [1] FAN-ALTERNATOR (11-BLADE)  
25. 3E-5455 [1] HOUSING  
26. 5P-7807 [1] BALL BEARING  
27. 3E-5447 [1] PLATE  
28. 030-9612 [3] SCREW-FORMING (10-24X0.5-IN)  
29. 3E-5452 [1] STATOR AS  
30. 132-1230 [1] KIT-ALTERNATOR TERMINAL (RELAY)  
    (INCLUDES INSULATOR, WASHER, NUT & TERMINAL)
31. 132-1224 [1] FRAME AS-ALTERNATOR  
32. 5P-6920 [1] BEARING-ROLLER  
 

#SEBP20120608
 

9L-5938: ALTERNATOR GP-CHARGING

9L-5938 ALTERNATOR GP-CHARGING
12 VOLTS, 65 AMPERE
PART OF 9N-0134 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00435255 SEBP2012
9L5938 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6777 [4] BOLT  
2. 9L-6778 [1] FRAME AS-END  
  3H-9675 C [1] PIN-SPRING  
3. 9S-2396 [1] BUSHING-TERMINAL  
4. 5P-6920 C [1] BEARING-ROLLER  
5. 9L-2137 [1] RETAINER AS  
6. 6N-6117 [2] SCREW  
7. 9L-6781 [1] FRAME-DRIVE END  
8. 9L-6766 [1] CONNECTOR  
9. 9L-6767 [1] DIODE AS  
10. 9L-6768 [1] CONNECTOR  
11. 9L-6770 [1] CAP-DUST  
12. 9L-6769 [1] LEAD AS  
13. 9L-6785 [2] SCREW  
  9S-2247 [2] WASHER-SPRING  
14. C [4] NUT  
15. 9L-6776 [1] RECTIFIER AS  
16. 9L-6780 [1] COLLAR  
17. 9N-1206 C [1] SCREW  
18. 9L-6774 [1] REGULATOR AS  
19. 3N-3718 [2] SCREW AS  
20. 9N-1204 C [1] HOLDER AS-BRUSH (ALTERNATOR)  
21. 9L-6775 [1] STATOR AS  
22. 3N-3745 [1] CAPACITOR AS  
23. 9L-2140 [1] PLATE  
24. 9L-6782 [1] SHIELD-DUST  
25. 9L-6783 C [1] COLLAR  
26. 7F-7621 [1] WASHER (0.635X1.25X0.09-IN THK)  
27. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
28. 9L-6784 [1] ROTOR AS  
29. 9L-2139 [1] WASHER-FELT (1.31X1.68X0.125-IN THK)  
30. 5M-3113 [1] BALL BEARING  
31. 9L-2138 [1] GASKET  
32. 9S-2258 [1] FAN & BAFFLE AS  
33. 9B-1722 [3] SCREW (10-24X0.5-IN)  
  3B-4502 [3] LOCKWASHER  
   
    AVAILABLE REPAIR KIT(S):
  9L-6786 [1] KIT-RELAY TERMINAL (ALTERNATOR)  
    (BUSHING, NUT, WASHER)
  9L-6787 [1] KIT-BATTERY TERMINAL (ALTERNATOR)  
    (STUD,INSULATOR,NUT,LOCKWASHER)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20120609
 

9N-0134: ALTERNATOR GP-CHARGING

9N-0134 ALTERNATOR GP-CHARGING
12 VOLT, 115 AMPERE
Type 1
AN ATTACHMENT
i00435633 SEBP2012
9N0134 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 009-8708 [1] BOOT-TERMINAL  
2. 9L-5938 CY [1] ALTERNATOR GP-CHARGING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Do Not Use A Wire Brush On Fuel Nozzles
1982/09/29
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
New 8T2998 Lubricant Available
1986/02/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Improved Locknut In Timing Advance On Fuel Pump And Governor Drive Group
1988/07/01
New Carrier Assembly Used In Governor And Fuel Pump Drive Groups
1992/06/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly.
1992/09/01
3406 Truck Engine Component Update
1992/10/01
Summery Of Changes To Timing Advance Drive Groups
1993/05/01
New Bonnet Used In Fuel Injection Pump Group
1993/06/01
Fuel Injection Pump Improvements{1251}
1994/01/01
Fuel Injection Pump Improvements{1251}
1994/04/22
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles {1254}
1994/05/31
Procedure For Lapping Sealing Surfaces Of Fuel Injection Pump Barrels And Bonnets{1251}
1994/06/24
Be Sure To Use The Correct Reverse Flow Check Valve{1251}
1994/07/01
Changing Complete Sets Of Fuel Injection Pump Groups May Not Fix Low Power Problems{1251}
1994/08/30
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance{1251}
1994/09/01
Electronic Timing Advance Improvements{1272,1253,1264}
1995/01/01
Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/27
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/01
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2009/04/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
New Electronic Transducer Module Installation Instructions For 3406B And 3406C Truck Engines{1900, 1904, 1917, 1924}
New Electronic Transducer Module Installation Instructions For 3406B And 3406C Truck Engines{1900, 1904, 1917, 1924}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Australia
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-CFEL
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-CSARL
Service Letter-Americas
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Pump
3406B (PEEC III) TRUCK ENGINE
Fuel Injection Pump Housing
3406B (PEEC III) TRUCK ENGINE
Fuel Injection Pump Camshaft
3406B (PEEC III) TRUCK ENGINE
Governor And Fuel Pump Drive Group (Timing Advance Unit)
3406B (PEEC III) TRUCK ENGINE
Fuel Injection Nozzle And Adapter
3406B (PEEC III) TRUCK ENGINE
Fuel Injection Pump
3406C (PEEC III) Truck Engine
Fuel Injection Pump Housing
3406C (PEEC III) Truck Engine
Governor and Fuel Pump Drive
3406C (PEEC III) Truck Engine
Fuel Injection Pump Housing
3406C (PEEC III) Truck Engine
Service Letter-China
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Asia
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
The Bolts In The Timing Advance Mechanism May Loosen Or Break On Certain 3406B PEEC Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Disassembly and Assembly
Timing Advance Unit
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pump Housing And Rack Actuator Package 1286-011
3406B DIESEL TRUCK ENGINE (PEEC III)
Rack Actuator Package
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Shut-Off Solenoid
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pumps
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Line Adapters
3406B DIESEL TRUCK ENGINE (PEEC III)
Fuel Injection Nozzles And Adapters
3406B DIESEL TRUCK ENGINE (PEEC III)
Timing Advance Unit
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Pump Housing And Rack Actuator Package 1286-011
3406C (PEEC III) TRUCK ENGINE
Rack Actuator Package
3406C (PEEC III) TRUCK ENGINE
Fuel Shut-Off Solenoid
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Pumps
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Pump Housing
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Line Adapters
3406C (PEEC III) TRUCK ENGINE
Fuel Injection Nozzles And Adapters
3406C (PEEC III) TRUCK ENGINE
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Carrier Assembly Used In Governor And Fuel Pump Drive Groups {1288,1299}
1992/08/10
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Fuel Injection Pump Improvements{1251}
1994/02/07
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/08

Caterpillar Parts SIS Catalog 3406B :

PUMP GP-FUEL INJECTION
4P-1366 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
108-6634 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
107-7537 PUMP GP-FUEL INJECTION
PUMP & MTG GP-FUEL TRANSFER
2W-4381 PUMP & MTG GP-FUEL TRANSFER
LINES GP-FUEL RATIO CONTROL
7W-8803 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL RATIO CONTROL
7E-8450 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL INJECTION
4P-9660 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9659 LINES GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
9N-3937 PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
1W-1700 PUMP GP-FUEL TRANSFER
PUMP GP-GOV & FUEL INJ
4P-7565 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-7565 PUMP GP-GOV & FUEL INJ
SHUTOFF GP-MANUAL
2W-9161 SHUTOFF GP-MANUAL
ALTERNATOR GP-CHARGING
121-4134 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
9L-5938 ALTERNATOR GP-CHARGING

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.