AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N-8080 CRANKSHAFT GP S/N 07Z28000-99999 PART OF 116-7579, 4P-2393 ENGINE AR 518C WHEEL SKIDDER


BASIC ENGINE
CRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP
DRIVE GP-FAN
PAN GP-OIL
CYLINDER HEAD GP
HOUSING GP-FRONT

WHEEL SKIDDER 518C WHEEL SKIDDER 9HJ
 518C Grapple Skidder 9HJ00001-UP (MACHINE) POWERED BY 3304 Engine SEBP2017 518C 9HJ   (1992)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT GP
6N-8080 CRANKSHAFT GP
HUB GP-CRANKSHAFT
2P-8598 HUB GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
2P-6226 SEAL GP-CRANKSHAFT
 

#SEBP20170020
 

6N-8080: CRANKSHAFT GP

6N-8080 CRANKSHAFT GP
S/N 07Z28000-99999
PART OF 116-7579, 4P-2393 ENGINE AR
i00146095 SEBP2017
6N8080 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 518C WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 232-3233 [5] BEARING-MAIN (STANDARD)  
  8N-8225 AB BEARING-MAIN (0.25-MM US)  
  8N-8226 AB BEARING-MAIN (0.51-MM US)  
  8N-8227 AB BEARING-MAIN (0.76-MM US)  
  8N-8228 AB BEARING-MAIN (0.51-MM OS)  
  8N-8229 AB BEARING-MAIN (0.25-MM US, 0.51-MM OS)(0.25-MM US, 0.51-MM OS)  
  4P-7305 AB BEARING-MAIN (0.51-MM OS, 0.51-MM US)  
  4P-7306 AB BEARING-MAIN (0.51-MM OS, 0.76-MM US)  
2. 100-3652 [2] PLATE-THRUST  
3. 337-0872 C [1] CRANKSHAFT AS  
  1W-4405 [1] GEAR-CRANKSHAFT (40-TEETH)  
  5H-2671 [1] KEY-WOODRUFF  
  8T-6757 [4] PLUG-PIPE  
   
    AVAILABLE REPAIR KIT(S):
  196-9532 A KIT-BASIC ENGINE REPAIR (STANDARD MAIN BEARINGS)  
    (INCLUDES A COMPLETE SET OF STANDARD MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP20170021
 

7N-6552: CYLINDER BLOCK AS

7N-6552 CYLINDER BLOCK AS
S/N 07Z28000-99999
PART OF 7N-6553 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 1N-3574@@@@@, 6N-7725 KIT-CYLINDER BLOCK
i00146115 SEBP2017
7N6552 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 518C WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-8003 [5] CAP-CRANKSHAFT BEARING  
2. 7S-3224 [10] BOLT (5/8-11X5.25-IN)  
  2S-5658 [10] WASHER-HARD (17X29X3-MM THK)  
3. 371-5941 [4] LINER-CYLINDER  
4. 2W-6134 [4] BAND-FILLER  
5. 456-5581 [12] SEAL-O-RING  
   
  104-5512 ABF INSERT-LINER SEAT (0.822-MM THK)  
  104-5513 ABF INSERT-LINER SEAT (0.872-MM THK)  
  104-5511 ABF INSERT-LINER SEAT (0.772-MM THK)  
  104-5518 ABF INSERT-LINER SEAT (1.605-MM THK)  
  104-5515 ABF INSERT-LINER SEAT (1.555-MM THK)  
  104-5522 ABF INSERT-LINER SEAT (1.655-MM THK)  
  104-5527 ABF INSERT-LINER SEAT (2.71-MM THK)  
  104-5528 ABF INSERT-LINER SEAT (2.76-MM THK)  
  104-5526 ABF INSERT-LINER SEAT (2.66-MM THK)  
  104-5530 ABF INSERT-LINER SEAT (5.21-MM THK)  
  104-5529 ABF INSERT-LINER SEAT (5.16-MM THK)  
  104-5531 ABF INSERT-LINER SEAT (5.26-MM THK)  
  8S-6045 ABF SHIM (0.007-MM THK)(CYLINDER LINER)  
  8S-6046 ABF SHIM (0.008-MM THK)(CYLINDER LINER)  
  8S-6047 ABF SHIM (0.009-MM THK)(CYLINDER LINER)  
  8S-6048 ABF SHIM (0.015-MM THK)(CYLINDER LINER)  
  8S-6049 ABF SHIM (0.029-MM THK)(CYLINDER LINER)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
 

#SEBP20170022
 

1N-3574: CYLINDER BLOCK GP

1N-3574 CYLINDER BLOCK GP
S/N 07Z28000-99999
FIELD REPLACEMENT FOR @@@@@ 7N-6552@@@@@
FIELD INSTALLATION
i00145904 SEBP2017
1N3574 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 518C WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-6019 C [1] PLUG  
2. 8K-1207 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 1S-9540 [1] DOWEL  
5. 8B-6349 [2] DOWEL (15.88MMX34.92MM)  
6. 5S-8462 [1] STUD  
7. 7M-4046 [2] BUSHING  
8. 8N-4110 [1] BUSHING  
9. 2A-3798 [2] DOWEL  
10. 6N-8003 [5] CAP-CRANKSHAFT BEARING  
11. 7S-3224 [10] BOLT (5/8-11X5.25-IN)  
  2S-5658 [10] WASHER-HARD (17X29X3-MM THK)  
12. 9Y-2991 [4] BUSHING  
13. 9Y-2992 [2] BUSHING  
14. 4B-9782 [5] BALL  
15. 4B-3938 C [1] PLUG-CUP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20170023
 

7N-6553: CYLINDER BLOCK GP

7N-6553 CYLINDER BLOCK GP
S/N 07Z28000-99999
PART OF 116-7579, 4P-2393 ENGINE AR
i00146116 SEBP2017
7N6553 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 518C WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-5496 [1] SEAL-O-RING  
2. 1S-9540 [1] DOWEL  
3. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
4. 4B-3938 [1] PLUG-CUP  
5. 8M-9307 [1] PLUG (CYLINDER BLOCK)  
  6F-7062 [1] WASHER (12.7X19.05X1.83-MM THK)  
6. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
7. 7M-4046 [2] BUSHING  
8. 7N-8021 [1] PLATE-BLOCK  
9. 5B-7652 [2] DOWEL  
10. 7W-7544 [1] GASKET-PLATE  
11. 7N-6552 Y [1] CYLINDER BLOCK AS  
12. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
13. 8K-1207 [2] DOWEL  
14. 8B-6349 [2] DOWEL  
15. 5S-8462 [1] STUD  
16. 8N-4110 [1] BUSHING  
17. 4B-9782 [5] BALL  
18. 9Y-2991 [4] BUSHING  
19. 9Y-2992 [2] BUSHING  
20. 8T-6762 [3] PLUG-PIPE (1/2-14-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20170024
 

1N-4304: CYLINDER HEAD GP

1N-4304 CYLINDER HEAD GP
S/N 07Z28000-99999
FIELD REPLACEMENT FOR @@@@@ 7N-8874@@@@@
i00683826 SEBP2017
1N4304 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 518C WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-4485 [1] VALVE AS-VENT (ENGINE COOLANT)  
2. 148-7425 [8] GUIDE-VALVE (STANDARD)  
  154-6997 ABF GUIDE-VALVE (0.51-MM OS)  
  154-6998 ABF GUIDE-VALVE (0.13-MM OS)  
3. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)(1/4-18 NPTF-THD)  
4. 8T-6762 [3] PLUG-PIPE (1/2-14-THD)(1/2-14-NPTF-THD)  
5. 0S-1594 [4] BOLT (3/8-16X1-IN)  
6. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 5S-6735 [1] GASKET  
8. 1P-6367 [1] COVER  
9. 3B-0623 [4] PLUG-CUP (25.73MM OD)  
10. 3P-1896 [9] PLUG-CUP (35.31MM OD)  
11. 3S-8313 [4] PLUG-CUP (32.08MM OD)  
12. 107-0265 [4] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  ABF INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  ABF INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  ABF INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  ABF INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
13. 107-0268 [4] INSERT-VALVE SEAT (INLET)(STANDARD)  
  ABF INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  ABF INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  ABF INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  ABF INSERT-VALVE SEAT (0.76-MM OS, INLET)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
 

#SEBP20170025
 

7N-8874: CYLINDER HEAD GP

7N-8874 CYLINDER HEAD GP
S/N 07Z28000-99999
PART OF 116-7579, 4P-2393 ENGINE AR
FIELD REPLACEMENT ORDER @@@@@ 1N-4304@@@@@
i00146122 SEBP2017
7N8874 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 518C WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 7N-8018 [4] SEAL  
3. 7S-7144 [8] SPRING-VALVE  
4. 100-7860 [4] VALVE-INLET  
5. 148-7455 [4] VALVE-EXHAUST  
6. 4P-8915 [1] GASKET-CYLINDER HEAD  
7. 3S-5496 [1] SEAL-O-RING  
8. 9Y-1798 [12] SEAL  
9. 1W-5300 [8] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
11. 148-7425 [8] GUIDE-VALVE (STANDARD)  
  154-6997 AB GUIDE-VALVE (0.51-MM OS)  
  154-6998 AB GUIDE-VALVE (0.13-MM OS)  
12. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
13. 3B-0623 [4] PLUG-CUP  
14. 107-0265 [4] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  ABF INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  ABF INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  ABF INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  ABF INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
15. 107-0268 [4] INSERT-VALVE SEAT (INLET)(STANDARD)  
  ABF INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  ABF INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  ABF INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  ABF INSERT-VALVE SEAT (0.76-MM OS, INLET)  
16. 3P-1896 [9] PLUG-CUP  
17. 3S-8313 [4] PLUG-CUP  
18. 8T-6762 [3] PLUG-PIPE (1/2-14-THD)(9.52 CF SQ HOLE)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
 

#SEBP20170026
 

2P-7831: DRIVE GP-FAN

2P-7831 DRIVE GP-FAN
S/N 9HJ1-99999
ADJUSTABLE, CRANK CENTER TO FAN VARIES FROM 13.00 TO 22.00 INCH
PART OF 118-4903, 4P-5601 INSTALLATION AR-ENGINE
i00157116 SEBP2017
2P7831 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 518C WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-9945 [1] BRACKET AS-FAN  
2. 3B-8485 [1] ELBOW (FAN DRIVE)  
3. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
4. 8H-9789 [1] BALL BEARING  
5. 8N-5305 C [1] SPACER (35.6X47.62X43.74-MM THK)  
6. 2P-1757 [1] HUB-FAN PULLEY  
7. 5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
8. 6V-4626 C [2] BOLT-LOCKING (5/16-24X2-IN)  
9. 3L-1425 [1] BALL BEARING  
10. 5S-2106 [1] SEAL-LIP TYPE  
11. 5P-2566 C [4] BOLT (1/2-13X1.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20170027
 

2P-6157: EXTENSION GP-DRAIN

2P-6157 EXTENSION GP-DRAIN
S/N 9HJ1-99999
PART OF 118-4903, 4P-5601 INSTALLATION AR-ENGINE
i00706591 SEBP2017
2P6157 EXTENSION GP-DRAIN Parts scheme
  For full view, you need register

Parts for your 518C WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-7732 [1] ELBOW-STREET  
2. 5P-1251 BE HOSE  
3. 7H-1442 [1] CLAMP-HOSE  
4. 7K-7739 [1] PIPE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP20170028
 

7N-9534: FASTENER GP-CYLINDER HEAD

7N-9534 FASTENER GP-CYLINDER HEAD
S/N 07Z28000-99999
PART OF 116-7579, 4P-2393 ENGINE AR
i00146123 SEBP2017
7N9534 FASTENER GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 518C WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-9603 [5] BOLT (3/8-16X5-IN)  
2. 1B-7709 C [3] BOLT (5/8-11X8-IN)  
3. 1D-4595 [14] BOLT (5/8-11X6-IN)  
4. 2S-0736 C [17] WASHER-HARD (17X27X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20170029
 

8N-0872: FASTENER GP-FRONT HOUSING

8N-0872 FASTENER GP-FRONT HOUSING
S/N 07Z28000-99999
PART OF 116-7579, 4P-2393 ENGINE AR
FOR USE WITH HIGH MOUNT ALTERNATOR BRACKETS
CANNOT BE USED WITH TRUNNION GPS
i00122461 SEBP2017
8N0872 FASTENER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 518C WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6914 C [6] BOLT (3/8-16X0.87-IN)  
2. 0L-2070 C [11] BOLT (3/8-16X2.25-IN)  
3. 5M-2894 C [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6V-8801 [3] NUT (3/8-16-THD)  
5. 1C-2251 B [2] BOLT (3/8-16X1.87-IN)  
6. 0L-2070 B [9] BOLT (3/8-16X2.25-IN)  
7. 5M-2894 B [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 6V-8801 B [5] NUT (3/8-16-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Bearing Clearance - Check
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
A New Type of Main Bearing is Available {1203}
2004/09/27
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 518C :

COVER GP-VALVE MECHANISM
8N-4446 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
2P-6529 COVER GP-FRONT HOUSING
COVER GP-CYLINDER HEAD
2P-6530 COVER GP-CYLINDER HEAD
COVER GP-CYLINDER BLOCK
2W-0102 COVER GP-CYLINDER BLOCK
CAMSHAFT GP
1N-4436 CAMSHAFT GP
1P-6820 BOLT GP-ENGINE MOUNTING
BALANCER GP
1W-2872 BALANCER GP
AIR COMPRESSOR GP
7E-8541 AIR COMPRESSOR GP
CYLINDER BLOCK AS
7N-6552 CYLINDER BLOCK AS
CYLINDER BLOCK GP
1N-3574 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7N-6553 CYLINDER BLOCK GP
CYLINDER HEAD GP
1N-4304 CYLINDER HEAD GP
CYLINDER HEAD GP
7N-8874 CYLINDER HEAD GP
DRIVE GP-FAN
2P-7831 DRIVE GP-FAN
EXTENSION GP-DRAIN
2P-6157 EXTENSION GP-DRAIN
FASTENER GP-CYLINDER HEAD
7N-9534 FASTENER GP-CYLINDER HEAD

Truck sale:

CATERPILLAR 518C 1994
 
CATERPILLAR 518C 1994
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
EMPIRE MACHINERY CO
1725 South Country Club Drive - Mesa -
1995 CAT 518C
Call 
1995 CAT 518C

CROWLEY EQUIPMENT INC
Eugene, Oregon
1993 CAT 518C
USD $29,000 
1993 CAT 518C

Delk Equipment
Jamestown, Tennessee
CATERPILLAR 518C 1994
 
CATERPILLAR 518C 1994
- FORESTRY - SKIDDER
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1994 CAT 518C
USD $37,500 
1994 CAT 518C

MILTON CAT
SYRACUSE, New York
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.