AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6I-2832 PUMP GP-FUEL INJECTION S/N 08Z66000-99999 PART OF 4P-5559 PUMP GP-GOV & FUEL INJ 528B WHEEL SKIDDER


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
FILTER GP-FUEL
PUMP GP-FUEL TRANSFER
GOVERNOR GP
TANK GP-FUEL
TORQUE CONTROL GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING

WHEEL SKIDDER 528B WHEEL SKIDDER 8SJ
 528B Wheel Skidder 8SJ00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2018 528B 8SJ   (1992)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
PUMP GP-FUEL INJECTION
6I-2832 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-5928 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
4P-5559 PUMP GP-GOV & FUEL INJ
 

#SEBP20180100
 

6I-2832: PUMP GP-FUEL INJECTION

6I-2832 PUMP GP-FUEL INJECTION
S/N 08Z66000-99999
PART OF 4P-5559 PUMP GP-GOV & FUEL INJ
i00122204 SEBP2018
6I2832 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
2. 4J-7533 [2] SEAL-O-RING  
3. 1W-3286 [1] RACK-REGULATOR  
4. 7W-5928 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 114-8718 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
8. 150-3724 [1] GASKET  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 4P-9832 [6] LIFTER AS  
12. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
13. 7N-1047 [1] COVER-TIMING  
14. 4P-9021 [1] CAMSHAFT AS  
  6I-2841 [1] CAMSHAFT-FUEL PUMP  
15. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
16. 7N-7264 [4] WEIGHT-GOVERNOR  
17. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
18. 1S-5440 [4] DOWEL  
19. 7E-3986 [1] CARRIER-WEIGHT  
20. 7N-7166 [2] RACE-THRUST BEARING  
21. 7L-3326 [1] BEARING-THRUST  
22. 4N-9019 [1] DOWEL  
23. 4P-9840 [1] HOUSING AS  
24. 1W-3285 [1] BEARING-RACK  
25. 1S-1953 [1] BEARING-RACK  
26. 6I-0979 [6] DOWEL  
27. 7N-7970 [1] BUSHING  
28. 4P-9828 [1] BUSHING  
29. 4P-8480 [6] PIN-PUMP GUIDE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20180101
 

7W-5928: PUMP GP-FUEL INJECTION

7W-5928 PUMP GP-FUEL INJECTION
S/N 08Z66000-99999
PART OF 6I-2832 PUMP GP-FUEL INJECTION
OPTIONAL FIELD REPLACEMENT ORDER 432-8277 PUMP GP-FUEL INJECTION
i00122409 SEBP2018
7W5928 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1927 [1] RING-RETAINING  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-9171 [1] BONNET-VALVE  
4. 1W-6987 [1] VALVE AS-CHECK (FUEL INJECTION PUMP)  
5. 7W-5929 [1] PLUNGER & BARREL AS (FUEL PUMP)  
6. 7C-5278 C [1] BOLT-PLUNGER GEAR (FUEL PUMP)  
7. 7N-1066 C [1] WASHER-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP20180102
 

8N-3365: PUMP GP-FUEL PRIMING

8N-3365 PUMP GP-FUEL PRIMING
S/N 08Z66000-99999
PART OF 8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
i00157299 SEBP2018
8N3365 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6350 [1] BASE AS-FUEL FILTER  
1A. 8N-0803 [1] BASE-FILTER  
1B. 7E-5346 [1] VALVE AS (FUEL CHECK)  
1C. 9S-8003 [2] PLUG (1/2-20-THD)  
1D. 1J-9671 [2] SEAL-O-RING  
2. 105-2508 [1] PUMP AS-FUEL PRIMING  
3. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
 

#SEBP20180103
 

8N-1180: PUMP GP-FUEL PRM & PRIM FILTER

8N-1180 PUMP GP-FUEL PRM & PRIM FILTER
S/N 08Z66000-99999
45 DEGREE
PART OF 4P-5558 ENGINE AR
i00157296 SEBP2018
8N1180 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-9191 B [1] BOLT (3/8-16X4-IN)  
    -OR-
  0T-0055 B [1] BOLT (3/8-16X4.25-IN)  
2. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 8N-5251 Y [1] PUMP GP-FUEL PRM & PRIM FILTER  
4. 030-8194 B [1] CONNECTOR  
  2M-9780 B [1] SEAL-O-RING  
5. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP20180104
 

8N-5251: PUMP GP-FUEL PRM & PRIM FILTER

8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
S/N 08Z66000-99999
PART OF 8N-1180 PUMP GP-FUEL PRM & PRIM FILTER
i00157301 SEBP2018
8N5251 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3365 Y [1] PUMP GP-FUEL PRIMING  
2. 8H-2807 [1] NUT (3/8-24-THD)  
3. 2J-0157 [1] SEAL-O-RING  
4. 1L-3769 [1] RING-RETAINING  
5. 8H-2778 [1] SEAL-RING (FUEL PRIMING PUMP)  
6. 7H-9678 [1] RETAINER-ELEMENT  
7. 7S-9323 [1] SPRING  
8. 2H-3429 [1] RING-RETAINING  
9. 8H-2810 [1] CASE AS-FILTER  
10. 9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)(PRIMARY)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20180105
 

1W-1695: PUMP GP-FUEL TRANSFER

1W-1695 PUMP GP-FUEL TRANSFER
S/N 08Z66000-99999
PART OF 2W-4160 PUMP & MTG GP-FUEL TRANSFER
OPTIONAL FIELD REPLACEMENT ORDER 1-279-4980 PUMP GP-FUEL TRANSFER, 1- 0R-3537 PUMP GP-FUEL TRANSFER
i00121975 SEBP2018
1W1695 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-1698 [1] HOUSING-TRANSFER PUMP  
2. 1W-1699 [1] COVER  
3. 1W-5912 [1] GUIDE & TAPPET AS  
3A. 7N-8821 [1] RING-RETAINING  
4. 6J-2419 [1] SEAL-O-RING  
5. 7E-2464 C [3] VALVE AS-CHECK (FUEL TRANSFER PUMP)  
6. 3D-2824 [1] SEAL-O-RING  
7. 6F-6672 [1] SEAL-O-RING  
8. 3D-2898 [1] SEAL-O-RING  
9. 5P-8215 [1] SEAL-O-RING  
10. 7W-0134 [1] SPRING-PUMP  
11. 8N-2637 [1] WASHER (21.3X29.5X1.6-MM THK)  
12. 7E-3667 C [1] SPACER (25.46X28.86X1.84-MM THK)  
13. 8N-2641 [1] SLEEVE  
14. 1W-1669 [1] PISTON  
15. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
16. 6D-8498 [2] SCREW-HEAD  
17. 8N-2640 [1] COVER  
18. 7E-4656 [1] RETAINER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20180106
 

4P-5559: PUMP GP-GOV & FUEL INJ

4P-5559 PUMP GP-GOV & FUEL INJ
S/N 08Z66000-99999
PART OF 4P-5558 ENGINE AR
i00170522 SEBP2018
4P5559 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
2. 033-5879 [1] SEAL-O-RING  
3. 8J-8343 [1] SEAL-O-RING  
4. 8L-5832 [1] NUT-HEX (10-32-THD)  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 8N-3088 [1] SHAFT AS-THROTTLE  
7. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
8. 9M-3160 [1] SPRING  
9. 7N-2176 [1] PIN-DETENT  
10. 4W-2242 [1] SPRING-DETENT  
11. 7N-1052 [1] DOWEL  
12. 8N-7276 Y [1] TORQUE CONTROL GP  
13. 8M-8515 [1] SEAL-O-RING  
14. 2W-5448 [1] COVER  
  7E-6785 [1] GASKET  
15. 2W-6559 Y [1] GOVERNOR GP  
16. 5P-6620 [1] SEAL-O-RING  
17. 7N-8768 [1] GASKET  
18. 3J-1907 [1] SEAL-O-RING  
19. 8N-5784 [1] DEFLECTOR-PULSE  
20. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
21. 6I-2832 Y [1] PUMP GP-FUEL INJECTION  
22. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
23. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
24. 0S-1616 [2] BOLT (1/4-20X1-IN)  
  7C-8992 [1] SEAL GP-PUMP (GOVERNOR, FUEL INJECTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20180107
 

2V-2949: TANK GP-FUEL

2V-2949 TANK GP-FUEL
S/N 8SJ1-UP
PART OF 4E-9241 CHASSIS AR
i00170482 SEBP2018
2V2949 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-2036 C [1] CAP AS-FILLER (FUEL)  
2. 4B-5949 [2] FILTER ELEMENT-FUEL (FUEL CAP)  
3. 8P-0408 [1] CAP-FILLER (FUEL TANK)  
4. 4B-5423 [1] GASKET  
5. 3F-4134 [1] BAFFLE (FUEL TANK FILL CAP)  
6. 7B-2002 [1] WASHER (10.2X44.5X3-MM THK)  
7. 7T-2009 [1] VALVE AS  
8. 7T-2037 [1] GASKET  
9. 5P-1075 C [4] WASHER-HARD (10.2X22.5X3-MM THK)  
10. 3V-5242 [1] PLUNGER  
11. 4V-6047 [1] BRACKET AS  
  9F-2978 [2] NUT-WELD (3/8-16-THD)  
12. 0S-1594 [2] BOLT (3/8-16X1-IN)  
13. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
14. 7F-9504 C [2] PLUG-PIPE  
15. 6A-9065 [1] SCREW  
16. 3V-5248 [1] TANK AS-FUEL  
17. 3V-5037 [1] BAR  
18. 6H-1717 [8] BOLT (1/2-13X1.125-IN)  
  3B-4508 [8] LOCKWASHER  
  0L-1714 [8] WASHER (13.5X33.3X4-MM THK)  
19. 5P-7090 [1] VALVE-BALL  
20. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
21. 3V-5241 [1] TUBE AS  
22. 3V-5042 [1] CLIP  
23. 2S-5100 [1] VALVE-MANUAL  
24. 002-6453 [1] ELBOW  
25. 9M-7958 [1] CLAMP-HOSE  
26. 5P-0180 BE HOSE  
27. 3B-7741 [1] NIPPLE-PIPE (CLOSE)  
28. 003-9014 [1] ELBOW  
29. 3B-7271 [1] NIPPLE-PIPE  
30. 3V-5043 [1] SCREEN AS  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#SEBP20180108
 

8N-7276: TORQUE CONTROL GP

8N-7276 TORQUE CONTROL GP
S/N 08Z66000-99999
PART OF 4P-5559 PUMP GP-GOV & FUEL INJ
i00122477 SEBP2018
8N7276 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1796 C [1] SPACER (1.549-MM THK)  
2. 8N-7519 [1] SPRING-TORQUE (0.635-MM THK)  
3. 2W-7234 [1] BAR-LOAD STOP (4-MM)  
4. 6L-5897 C [2] BOLT (1/4-20X0.875-IN)  
5. 8M-9062 [1] RETAINER-SPRING (3.05-MM THK)  
6. 2P-2685 [1] SPACER (0.635-MM THK)  
7. 1P-6452 [1] INSULATOR  
8. 7W-5700 C [1] CONTACT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20180109
 

100-5045: ALTERNATOR GP-CHARGING

100-5045 ALTERNATOR GP-CHARGING
S/N 8SJ1-UP
24 VOLT, 50 AMPERE
PART OF 100-5047 ALTERNATOR GP-CHARGING
FIELD REPLACEMENT ORDER @@@@@169-3345@@@@@
AN ATTACHMENT
i00093506 SEBP2018
1005045 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-2793 [1] FAN AS (12-BLADE)  
2. 7T-2790 [1] ROTOR AS  
3. 7T-6418 [1] STATOR AS  
4. 7T-2792 [1] FRAME AS  
5. 7T-6417 [1] COIL AS  
6. 7T-2798 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
7. 7T-2797 [1] COVER  
8. 7T-6416 [1] HOLDER AS-BRUSH (ALTERNATOR)  
9. 7T-2795 [1] FRAME AS  
10. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
11. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
12. 7T-2801 [1] CONDENSER  
13. 7X-0447 [1] NUT (7/16-14-THD)  
14. 2H-3920 [1] LOCKWASHER  
15. 9L-6770 [1] CAP-DUST  
16. 6V-8185 [1] NUT (1/4-20-THD)  
17. 1H-3244 [1] LOCKWASHER  
18. 7T-2802 [1] WIRE AS  
   
  1B-8705 F [1] KEY-WOODRUFF  
   
    AVAILABLE REPAIR KIT(S):
  7T-2799 [1] KIT-BEARING  
    (INCLUDES BEARINGS)
  7T-2800 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES INSULATORS, LOCKWASHERS, WASHERS & NUTS)
  7T-2803 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES SCREW ASSEMBLIES & BOLT ASSEMBLIES)
  7T-2804 [1] KIT-ALTERNATOR TERMINAL (RELAY)  
    (INCLUDES CAP, BOLT, WIRE AS & BUSHING)
  7T-2805 [1] KIT-ALTERNATOR TERMINAL (NEGATIVE)  
    (INCLUDES NUTS, LOCKWASHERS, WASHER & INSULATORS)
  7T-2816 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES WASHERS, SPACERS, RING, PLATE AS, BOLT AS & PLATE)
  F   NOT SHOWN
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Disassembly and Assembly
Fuel Injection Nozzles - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog 528B :

PUMP & MTG GP-FUEL TRANSFER
2W-4160 PUMP & MTG GP-FUEL TRANSFER
LINES GP-FUEL INJECTION
4P-9331 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9330 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9330 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-3609 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-3008 LINES GP-FUEL INJECTION
LINES GP-FUEL DRAIN
2W-1605 LINES GP-FUEL DRAIN
LINES GP-FUEL
9U-2905 LINES GP-FUEL
PUMP GP-FUEL INJECTION
7W-5928 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
8N-3365 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRM & PRIM FILTER
8N-1180 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL TRANSFER
1W-1695 PUMP GP-FUEL TRANSFER
PUMP GP-GOV & FUEL INJ
4P-5559 PUMP GP-GOV & FUEL INJ
TANK GP-FUEL
2V-2949 TANK GP-FUEL
TORQUE CONTROL GP
8N-7276 TORQUE CONTROL GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.