AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3V-1621 HEATER GP-CAB S/N 8SJ1-UP PART OF 100-3104 HEATER GP-CAB AN ATTACHMENT 528B WHEEL SKIDDER


OPERATOR STATION
HEATER GP
HORN GP
INSTALLATION GP-CONTROLS
MIRROR GP
WIPER GP-WINDOW
ROPS/FOPS GP

WHEEL SKIDDER 528B WHEEL SKIDDER 8SJ
 528B Wheel Skidder 8SJ00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2018 528B 8SJ   (1992)

OPERATOR STATION

HEATER GP
HEATER GP-CAB
100-3104 HEATER GP-CAB
HEATER GP-CAB
3V-1621 HEATER GP-CAB
 

#SEBP20180290
 

3V-1621: HEATER GP-CAB

3V-1621 HEATER GP-CAB
S/N 8SJ1-UP
PART OF 100-3104 HEATER GP-CAB
AN ATTACHMENT
i00169990 SEBP2018
3V1621 HEATER GP-CAB Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-1230 [4] NUT-LOCKING (10-32-THD)  
  4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
2. 9W-0604 C [1] MOTOR AS  
  2L-8076 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  6K-0613 [2] TERMINAL-BULLET (14-GA TO 20-GA)(BULLET)  
3. 6T-6800 C [1] WIRE AS  
4. 3T-0726 [2] SUPPORT AS  
5. 9D-8508 [1] GROMMET  
6. 3V-1935 [1] WIRE AS  
7. 7K-6419 [1] FAN  
8. 3T-0778 [1] COIL  
9. 2K-8270 [4] NUT AS-SPRING  
10. 7K-6421 [1] CASE-HEATER (REAR)  
11. 7K-6422 [1] COVER-HEATER  
12. 2L-9038 [4] LOCKNUT (1/4-28-THD)  
  5P-0537 C [4] WASHER-HARD (7.2X14.5X2-MM THK)  
13. 7K-6420 [1] SHROUD  
14. 7B-2742 [4] BOLT (1/4-20X1.25-IN)  
  1B-4330 [4] NUT (1/4-20-THD)  
  1H-3338 [4] LOCKWASHER (EXTERNAL TOOTH)  
  5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 6T-8943 C [1] PLATE  
16. 8B-2377 C [1] BOLT (1/4-20X2-IN)  
  6T-9256 C [2] WASHER (7.14X12.7X1.6-MM THK)  
  009-9258 C [1] NUT (1/4-20-THD)  
17. 6T-9255 C [1] PLATE  
   
    AVAILABLE REPAIR KIT(S):
  6T-9254 C [1] KIT-RESISTOR HARDWARE  
  9G-0398 C [1] KIT-MOTOR BRUSH  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20180291
 

8K-5497: HORN GP-ELECTRIC

8K-5497 HORN GP-ELECTRIC
S/N 8SJ1-UP
PART OF 4E-9241 CHASSIS AR
Type 1
i00170552 SEBP2018
8K5497 HORN GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4K-6499 [1] GROMMET  
2. 3S-2093 [2] STRAP-CABLE  
3. 8K-5489 [1] WIRE AS  
  2D-8783 [1] TERMINAL AS  
  7H-1189 [1] TERMINAL AS  
5. 7K-0447 [1] HORN AS  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
6. 8K-8630 [1] WIRE AS  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8078 [1] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
8. 4M-0061 [2] BOLT (5/16-18X0.75-IN)  
  8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
9. 6S-4895 [1] WIRE AS  
  7B-4826 [2] INSULATOR  
  7H-1186 [2] TERMINAL AS  
11. 3D-9718 CJ [1] SWITCH AS-PUSH BUTTON  
12. 1H-5166 [1] CLIP  
   
    AVAILABLE REPAIR KIT(S):
  155-2270 J [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP20180292
 

8K-5497: HORN GP-ELECTRIC

8K-5497 HORN GP-ELECTRIC
S/N 8SJ1-UP
PART OF 4E-9241 CHASSIS AR
Type 2
i01693115 SEBP2018
8K5497 HORN GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4K-6499 [1] GROMMET  
2. 3S-2093 [2] STRAP-CABLE  
3. 8K-5489 [1] WIRE AS  
  2D-8783 [1] TERMINAL AS  
  7H-1189 [1] TERMINAL AS  
5. 163-1201 C [1] HORN AS (24-VOLT, LOW TONE)  
6. 8K-8630 [1] WIRE AS  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8078 [1] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
8. 4M-0061 C [1] BOLT (5/16-18X0.75-IN)  
9. 6S-4895 [1] WIRE AS  
  7B-4826 [2] INSULATOR  
  7H-1186 [2] TERMINAL AS  
11. 3D-9718 J [1] SWITCH AS-PUSH BUTTON  
12. 1H-5166 [1] CLIP  
13. 5R-5553 C [1] BRACKET  
14. 5M-3062 C [1] BOLT (3/8-16X0.75-IN)  
15. 6V-8801 C [1] NUT (3/8-16-THD)  
16. 8T-4896 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 8T-4224 C [1] WASHER-HARD (8.8X16X2-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  155-2270 J [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP20180293
 

9U-4300: INSTALLATION GP-GOV CONTROL

9U-4300 INSTALLATION GP-GOV CONTROL
S/N 8SJ1-UP
PART OF 4E-9241 CHASSIS AR
i00170616 SEBP2018
9U4300 INSTALLATION GP-GOV CONTROL Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-0496 [1] BOLT (3/8-16X1.75-IN)  
2. 6V-2866 [2] SPACER  
3. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
4. 1V-7901 [1] BRACKET  
5. 4F-6123 [1] SPRING  
6. 1B-0676 [1] PIN  
7. 3B-4615 [1] PIN-COTTER  
8. 2S-2174 [1] LEVER  
9. 4M-5282 [1] BOLT (1/4-20X1.5-IN)  
10. 6V-8185 [1] NUT (1/4-20-THD)  
11. 1F-5403 [1] ROD END  
12. 9U-4291 [1] ROD AS  
13. 7X-7875 [1] ROD END  
14. 6V-2867 [1] BOOT-ROD END  
15. 4M-0497 [1] NUT (3/8-16-THD)  
16. 7K-5749 [1] PEDAL AS  
17. 6V-3822 M [4] BOLT (M10X1.5X35-MM)  
18. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
  M   METRIC PART
 

#SEBP20180294
 

100-3102: MIRROR GP-REAR VIEW

100-3102 MIRROR GP-REAR VIEW
S/N 8SJ1-UP
PART OF 4E-9241 CHASSIS AR
i00170618 SEBP2018
1003102 MIRROR GP-REAR VIEW Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6872 [2] MIRROR AS  
2. 6W-0543 [1] BRACKET  
3. 6W-0544 [1] BRACKET  
4. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
  M   METRIC PART
 

#SEBP20180295
 

3T-7068: MOTOR GP-WINDOW WIPER

3T-7068 MOTOR GP-WINDOW WIPER
S/N 8SJ1-UP
24 VOLT
PART OF 100-3103 WIPER & WASHER GP-WINDOW
AN ATTACHMENT
i00110959 SEBP2018
3T7068 MOTOR GP-WINDOW WIPER Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-7059 [1] BRACKET  
2. 5C-9553 M [3] BOLT (M6X1X16-MM)  
3. 3T-7086 [1] CRANK AS  
4. 6V-6889 M [2] NUT (M8X1.25-THD)  
5. 6V-6888 [1] WASHER-SPRING (8.31X15.54X1.07-MM THK)  
6. 6V-6219 [1] LINK-CONNECTING  
7. 3C-1884 M [4] SCREW-MACHINE (M5X0.8-THD)  
8. 6T-2770 [1] SHAFT AS-DRIVE  
9. 6V-6209 [1] CAP-WIPER  
10. 6V-6213 M [1] NUT (M20X1-THD)  
11. 6V-6214 [1] WASHER (20.15X29.6X1-MM THK)  
12. 5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
13. 6A-9718 [1] WASHER (8.1X12.5X1-MM THK)  
14. 9X-3392 [1] MOTOR AS-WINDOW WIPER (24-VOLT)  
15. 7N-8204 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  M   METRIC PART
 

#SEBP20180296
 

9U-3100: ROPS AR

9U-3100 ROPS AR
S/N 8SJ1-UP
ENCLOSED CAB
AN ATTACHMENT
i00170615 SEBP2018
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  100-3105 Y [1] FAN GP-DEFROSTER  
  100-3104 Y [1] HEATER GP-CAB  
    S/N 8SJ110-UP
  9U-1035 Y [1] ROPS GP  
  110-8444 Y [1] SUPPRESSION GP-SOUND  
  100-3103 Y [1] WIPER & WASHER GP-WINDOW  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20180297
 

9U-1000: ROPS GP

9U-1000 ROPS GP
S/N 8SJ1-UP
PART OF 4E-9241 CHASSIS AR
Type 1
i00170587 SEBP2018
9U1000 ROPS GP Parts scheme 9U1000 ROPS GP Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-4288 [1] LOCK AS-CYLINDER  
  7F-9223 [1] LOCKWASHER  
  8T-5004 [1] SCREW-MACHINE (1/4-28X0.375-IN)  
2. 9U-1050 [1] ROPS AS  
  1D-4164 [1] HANDRAIL  
  4E-1312 [2] PLATE  
  4V-6605 [4] HINGE-HALF  
  4V-6608 [2] HINGE-HALF  
  6F-3259 [1] LUG  
  6V-9632 M [30] NUT-WELD (M6X1-THD)  
  7T-1099 [8] LINK  
  8T-3490 M [28] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [5] NUT-WELD (M12X1.75-THD)  
  8T-4219 M [3] STUD-WELD (M10X1.5X17.5-MM)  
  9P-2512 [3] BOSS (82-MM HIGH)  
  9T-6001 M [1] BOSS (M10X1.5-THD)(25 MM HIGH)  
  4E-4183 [1] HINGE  
  3V-5035 [2] SPACER (0.302X0.54X1.03-IN THK)  
3. 6V-1155 [2] STRIKER AS  
    (EACH INCLUDES)
  6V-4270 [1] LOCKWASHER  
4. 4J-3915 B [6] SHIM (1.52-MM THK)  
5. 7V-7157 [2] BLOCK  
6. 9U-1043 [2] WINDOW  
7. 9U-0983 [1] ANGLE AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
8. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
9. 8T-4189 M [6] BOLT (M8X1.25X20-MM)  
10. 5C-7261 M [6] NUT (M8X1.25-THD)  
11. 3E-8020 M [37] SCREW-TRUSS HEAD (M6X1X25-MM)  
12. 9U-3070 Y [1] DOOR GP-CAB  
13. 9U-3157 [1] FRAME AS (LH)  
14. 9U-3155 [2] SEAL  
15. 9U-3156 [2] SEAL  
16. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
18. 9U-1159 [1] SUPPORT AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
19. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
20. 6V-5845 M [16] BOLT (M20X2.5X70-MM)  
21. 6V-7742 M [16] NUT-FULL (M20X2.5-THD)  
22. 9U-3152 [1] FRAME AS (RH)  
23. 9U-3060 Y [1] DOOR GP-CAB  
24. 9U-1052 [1] SCREEN AS  
25. 6V-3987 BD SEAL  
26. 5P-5901 BD SEAL  
27. 100-6382 [1] WINDOW  
28. 6V-8225 M [4] NUT (M6X1-THD)  
29. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
30. 5C-2890 M [4] NUT (M6X1-THD)  
31. 4V-6604 [2] HINGE AS  
32. 104-7767 [1] ANGLE AS  
33. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
34. 104-7764 [1] SCREEN AS  
35. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
36. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
38. 100-4912 [1] PLATE AS  
39. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
40. 9X-2040 M [15] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
41. 104-7763 [1] SCREEN AS  
42. 9U-1160 [1] COVER AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
43. 9X-2041 M [12] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
44. 9U-1018 [1] COVER  
45. 9U-1006 [1] PLATE  
46. 100-4712 [1] INSULATION-HEADLINER  
47. 100-4711 [1] INSULATION-HEADLINER  
48. 6V-5746 B TRIM  
49. 6V-3987 BD SEAL  
50. 5T-7870 [6] KNOB  
51. 5F-6849 [6] STUD  
52. 4J-8265 [6] NUT (3/8-16-THD)  
53. 4V-6607 [2] HINGE AS  
54. 9U-3090 [1] SCREEN AS  
55. 5P-5901 BD SEAL  
56. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
57. 5C-2890 M [4] NUT (M6X1-THD)  
58. 4V-6604 [2] HINGE AS  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20180298
 

9U-1000: ROPS GP

9U-1000 ROPS GP
S/N 8SJ1-UP
PART OF 4E-9241 CHASSIS AR
Type 2
i00170588 SEBP2018
9U1000 ROPS GP Parts scheme 9U1000 ROPS GP Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-0480 C [1] DOOR AS  
  9M-5732 [5] RIVET-POP  
  6V-6957 [1] LATCH AS-HANDLE  
  6V-2873 J [1] LOCK AS-CYLINDER  
2. 107-7390 C [1] ROPS AS  
3. 6V-1155 [2] STRIKER AS  
    (EACH INCLUDES)
  6V-4270 [1] LOCKWASHER  
4. 4J-3915 CB [8] SHIM (1.52-MM THK)  
5. 7V-7157 [2] BLOCK  
6. 9U-1043 [2] WINDOW  
7. 9U-0983 [1] ANGLE AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
8. 8T-4224 C [7] WASHER-HARD (8.8X16X2-MM THK)  
9. 8T-4189 M [6] BOLT (M8X1.25X20-MM)  
10. 5C-7261 M [6] NUT (M8X1.25-THD)  
11. 3E-8020 M [37] SCREW-TRUSS HEAD (M6X1X25-MM)  
12. 9U-3070 Y [1] DOOR GP-CAB  
13. 9U-3157 [1] FRAME AS (LH)  
14. 9U-3155 [2] SEAL  
15. 9U-3156 [2] SEAL  
16. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
18. 9U-1159 [1] SUPPORT AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
19. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
20. 6V-5845 M [16] BOLT (M20X2.5X70-MM)  
21. 6V-7742 M [16] NUT-FULL (M20X2.5-THD)  
22. 9U-3152 [1] FRAME AS (RH)  
23. 9U-3060 Y [1] DOOR GP-CAB  
24. 9U-1052 [1] SCREEN AS  
25. 6V-3987 BD SEAL  
26. 5P-5901 BD SEAL  
27. 9U-3084 C [2] BLOCK  
28. 5P-6126 CBD SEAL  
29. 5P-9911 CBD SEAL  
30. 9V-4786 C [2] CLIP  
31. 4V-6607 C [2] HINGE AS  
32. 104-7767 [1] ANGLE AS  
33. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
34. 9U-3096 C [1] SCREEN AS  
  6V-3231 [2] BOSS-WELD  
35. 108-0490 C [1] BLOCK  
36. 5P-7970 CM [2] NUT (M8X1.25-THD)  
37. 5V-8309 C [1] STRIKER AS  
38. 8T-2444 C [2] STUD-BALL  
39. 8T-2526 C [1] SPRING AS  
40. 8T-4138 CM [4] BOLT (M6X1X20-MM)  
41. 8T-4205 C [4] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 3E-8020 CM [8] SCREW-TRUSS HEAD (M6X1X25-MM)  
43. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
45. 100-4912 [1] PLATE AS  
46. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
47. 9X-2040 M [15] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
48. 9U-3099 C [1] SCREEN AS  
  6V-3231 [2] BOSS-WELD  
49. 9U-1160 [1] COVER AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
50. 9X-2041 M [12] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
51. 9U-1018 [1] COVER  
52. 9U-1006 [1] PLATE  
53. 100-4712 [1] INSULATION-HEADLINER  
54. 100-4711 [1] INSULATION-HEADLINER  
55. 6V-5746 B TRIM  
56. 6V-3987 BD SEAL  
57. 5T-7870 [6] KNOB  
58. 5F-6849 [6] STUD  
59. 4J-8265 [6] NUT (3/8-16-THD)  
60. 4V-6607 [2] HINGE AS  
61. 9U-3090 [1] SCREEN AS  
62. 5P-5901 BD SEAL  
63. 106-9628 CB [4] SHIM (1-MM THK)  
64. 9U-3084 C [2] BLOCK  
65. 4V-6604 [2] HINGE AS  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  J   REQUIRES 5P8500 KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20180299
 

9U-1035: ROPS GP

9U-1035 ROPS GP
S/N 8SJ1-UP
PART OF 9U-3100 ROPS AR
Type 1
AN ATTACHMENT
i00170589 SEBP2018
9U1035 ROPS GP Parts scheme 9U1035 ROPS GP Parts scheme
  For full view, you need register

Parts for your 528B WHEEL SKIDDER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-6607 [2] HINGE AS  
2. 3E-8020 M [41] SCREW-TRUSS HEAD (M6X1X25-MM)  
3. 9U-3084 [2] BLOCK  
4. 9U-3096 [1] SCREEN AS  
  6V-3231 [2] BOSS-WELD  
5. 9U-1050 [1] ROPS AS  
  4V-6605 [4] HINGE-HALF  
  4V-6608 [2] HINGE-HALF  
  1D-4164 [1] HANDRAIL  
  4E-1312 [2] PLATE  
  6V-9632 M [30] NUT-WELD (M6X1-THD)  
  6F-3259 [1] LUG  
  8T-3490 M [28] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [5] NUT-WELD (M12X1.75-THD)  
  9P-2512 [3] BOSS (82-MM HIGH)  
  4E-4183 [1] HINGE  
  7T-1099 [8] LINK  
  8T-4219 M [3] STUD-WELD (M10X1.5X17.5-MM)(M10X1.5X17.5 MM)  
  9T-6001 M [1] BOSS (M10X1.5-THD)(25 MM HIGH)  
  3V-5035 [2] SPACER (0.302X0.54X1.03-IN THK)  
6. 9U-3075 Y [1] DOOR GP-CAB  
7. 6V-1155 [2] STRIKER AS  
    (EACH INCLUDES)
  6V-4270 [1] LOCKWASHER  
8. 4J-3915 B [6] SHIM (1.52-MM THK)  
9. 7V-7157 [2] BLOCK  
10. 9U-3147 [1] SEAL  
11. 5P-6605 BD SEAL  
12. 8Y-6871 [1] GLASS  
13. 9U-3144 [1] FRAME AS  
14. 9U-3148 [2] SEAL  
15. 9U-3157 [1] FRAME AS (LH)  
16. 9U-3155 [2] SEAL  
17. 9U-3156 [2] SEAL  
18. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
19. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 9U-1159 [1] SUPPORT AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
21. 9U-3143 [1] WINDOW-FRONT  
22. 9U-0983 [1] ANGLE AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
23. 8T-4189 M [6] BOLT (M8X1.25X20-MM)  
24. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
25. 5C-7261 M [6] NUT (M8X1.25-THD)  
26. 9U-1043 [2] WINDOW  
27. 6V-5845 M [16] BOLT (M20X2.5X70-MM)  
28. 8T-4123 [32] WASHER (3.62X5.75X0.375-MM THK)  
29. 6V-7742 M [16] NUT-FULL (M20X2.5-THD)  
30. 9U-3149 [1] SEAL  
31. 9U-3152 [1] FRAME AS (RH)  
32. 8Y-4288 [1] LOCK AS-CYLINDER  
  7F-9223 [1] LOCKWASHER  
  8T-5004 [1] SCREW-MACHINE (1/4-28X0.375-IN)  
33. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
34. 100-6382 [1] WINDOW  
35. 6V-8225 M [4] NUT (M6X1-THD)  
36. 104-7767 [1] ANGLE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
37. 4V-6607 [2] HINGE AS  
38. 3E-8020 M [8] SCREW-TRUSS HEAD (M6X1X25-MM)  
39. 9U-3084 [2] BLOCK  
40. 5P-6605 BD SEAL  
41. 8Y-6871 [1] GLASS  
42. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
43. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 9U-1019 [1] PLATE  
45. 9U-3055 Y [1] DOOR GP-CAB  
46. 9U-1160 [1] COVER AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
47. 9X-2040 M [15] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
48. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
49. 9U-3099 [1] SCREEN AS  
  6V-3231 [2] BOSS-WELD  
50. 4V-6604 [2] HINGE AS  
51. 9U-3090 [1] SCREEN AS  
52. 9X-2041 M [12] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
53. 5P-5768 BD SEAL  
54. 8Y-6869 Y [1] WINDOW GP  
55. 4J-8265 [6] NUT (3/8-16-THD)  
56. 5F-6849 [6] STUD  
57. 5T-7870 [6] KNOB  
58. 9U-1006 [1] PLATE  
59. 9U-1018 [1] COVER  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}

Caterpillar Parts SIS Catalog 528B :

HEATER GP-CAB
100-3104 HEATER GP-CAB
GUARD GP-VANDALISM
7C-9227 GUARD GP-VANDALISM
GUARD GP-VANDALISM
1N-4297 GUARD GP-VANDALISM
GAUGE GP-CLUSTER
9U-1929 GAUGE GP-CLUSTER
7I-3161 FIRE EXTINGUISHER GP
FAN GP-DEFROSTER
100-3105 FAN GP-DEFROSTER
FAN GP-CIRCULATING
5D-2856 FAN GP-CIRCULATING
DOOR GP-CAB
9U-3075 DOOR GP-CAB
HORN GP-ELECTRIC
8K-5497 HORN GP-ELECTRIC
HORN GP-ELECTRIC
8K-5497 HORN GP-ELECTRIC
INSTALLATION GP-GOV CONTROL
9U-4300 INSTALLATION GP-GOV CONTROL
MIRROR GP-REAR VIEW
100-3102 MIRROR GP-REAR VIEW
MOTOR GP-WINDOW WIPER
3T-7068 MOTOR GP-WINDOW WIPER
9U-3100 ROPS AR
ROPS GP
9U-1000 ROPS GP
ROPS GP
9U-1000 ROPS GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.