AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N-4651 TURBOCHARGER GP S/N 09Z10600-UP PART OF 7N-4650 TURBOCHARGER GP D4H XL TRACK-TYPE TRACTOR


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
CAMSHAFT AS
CONTROL GP-DECELERATOR
CONTROL GP-GOVERNOR
DRIVE GP-TACHOMETER
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP
LINES GP-FUEL

TRACK-TYPE TRACTOR D4H XL TRACK-TYPE TRACTOR 8PJ
 D4H XL D4H Series IIILGP Track-Type Tractors 8PJ00001-UP (MACHINE) POWERED BY 3304 Engine SEBP2021 D4H XL 8PJ   (1992)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
1W-0558 LINES GP-TURBOCHARGER OIL
TURBOCHARGER GP
7N-4650 TURBOCHARGER GP
TURBOCHARGER GP
7N-4651 TURBOCHARGER GP
 

#SEBP20210080
 

7N-4651: TURBOCHARGER GP

7N-4651 TURBOCHARGER GP
S/N 09Z10600-UP
PART OF 7N-4650 TURBOCHARGER GP
i00146114 SEBP2021
7N4651 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6860 [1] CARTRIDGE GP-TURBOCHARGER  
  4N-6861 [1] WHEEL-COMPRESSOR  
2. 4N-6863 [1] PLATE AS-BACKING  
3. 1P-1111 [1] BEARING-THRUST  
4. 1P-1120 J [1] RING-SEAL  
5. 1P-1114 [2] BEARING-TURBOCHARGER  
6. 2P-9635 [1] HOUSING AS-CENTER  
  1P-1136 [2] PIN  
7. 7N-0012 [1] SHROUD  
8. 1P-1116 [1] WHEEL & SHAFT AS  
9. 7N-6609 J [1] RING-PISTON  
10. 2P-9607 J [4] RING-RETAINING  
11. 2A-0762 [4] BOLT (1/4-20X0.625-IN)  
  1P-1117 J [2] PLATE-LOCK  
12. 1P-1124 J [1] RING-PISTON  
13. 1P-1123 [1] COLLAR-THRUST  
14. 1P-1125 J [1] LOCKNUT-TURBOCHARGER  
16. 6V-2489 [6] BOLT-HIGH TEMPERATURE  
17. 4N-6864 [3] CLAMP (COMPRESSOR)  
  4N-6865 [3] LOCK-PLATE  
18. 7N-1687 [1] HOUSING  
19. 1P-1112 [3] CLAMP (TURBINE)  
  1P-1113 [3] LOCK-PLATE  
20. 4N-6862 [1] HOUSING-COMPRESSOR  
21. 1C-0569 [6] BOLT (5/16-18X0.5-IN)  
   
    AVAILABLE REPAIR KIT(S):
  2W-0716 CJ [1] CARTRIDGE GP-TURBOCHARGER  
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP20210081
 

2W-0262: CAMSHAFT AS

2W-0262 CAMSHAFT AS
S/N 09Z10600-UP
21 DEGREES-GOVERNOR
PART OF 2W-0263 PUMP GP-FUEL INJECTION
i00145977 SEBP2021
2W0262 CAMSHAFT AS Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
2. 7N-7264 [4] WEIGHT-GOVERNOR  
3. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
4. 1S-5440 [4] DOWEL  
5. 4N-9019 [1] DOWEL  
6. 8N-2511 [1] CARRIER-WEIGHT  
7. 7N-7166 [2] RACE-THRUST BEARING  
8. 7L-3326 [1] BEARING-THRUST  
9. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
 

#SEBP20210082
 

8G-3913: CONTROL GP-DECELERATOR

8G-3913 CONTROL GP-DECELERATOR
S/N 8PJ1-99999; 9GJ1-99999
PART OF 8E-8670, 8E-8674 POWER TRAIN AR
i00420266 SEBP2021
8G3913 CONTROL GP-DECELERATOR Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-1303 [2] PIN  
2. 3B-4607 C [2] PIN-COTTER  
3. 8M-6701 BC [5] WASHER (0.281X0.5X0.032-IN THK)  
4. 8T-0798 [2] BEARING-ROLLER  
5. 8T-0741 [2] SEAL-LIP TYPE  
6. 1A-4790 [2] WASHER (16.7X31.8X1.6-MM THK)  
7. 3W-0602 [1] SHAFT  
8. 6V-8801 [1] NUT (3/8-16-THD)  
9. 9G-2341 [1] PEDAL  
10. 3B-4617 C [1] PIN-COTTER  
11. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
12. 9G-2324 B [1] BAR (25MM HOLE TO SLOT)  
13. 1B-8706 [1] KEY-WOODRUFF  
14. 8G-5240 [1] LEVER  
15. 8T-9375 [1] BOLT (3/8-16X1.75-IN)  
16. 7F-1866 [1] BOLT (3/8-16X3-IN)  
17. 8Y-0581 B [1] BAR (22MM HOLE TO SLOT)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20210083
 

8E-8659: CONTROL GP-GOVERNOR

8E-8659 CONTROL GP-GOVERNOR
S/N 8PJ1-99999; 9GJ1-99999
PART OF 8E-8669 CHASSIS AR
i00416360 SEBP2021
8E8659 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1899 [1] ROD AS  
2. 4D-4064 [2] ROD END (3/8-24-THD)  
3. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
4. 7M-6955 [2] GASKET  
5. 9G-1913 [1] PLATE  
6. 6Y-7410 [1] COVER AS  
7. 091-9915 [1] WASHER-HARD (20X35X1.6-MM THK)  
8. 8T-1177 [2] BEARING-ROLLER  
9. 8T-1173 [4] SEAL-LIP TYPE  
10. 3W-3387 [1] SHAFT AS  
  2S-6091 [3] DOWEL  
11. 3W-3828 [1] HOUSING  
12. 8E-4745 [1] SPRING-DISC  
13. 2H-3881 [1] SETSCREW-SQUARE HEAD  
14. 6V-8801 [4] NUT (3/8-16-THD)  
15. 4L-9337 [3] BOLT (3/8-16X1.5-IN)  
16. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
17. 1B-8706 [2] KEY-WOODRUFF  
18. 8E-3394 [1] LEVER (GOVERNOR CONT.)  
19. 6D-0679 [1] KNOB  
20. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
21. 4L-6454 [3] BOLT (3/8-16X1-IN)  
22. 9G-3384 [1] SUPPORT  
23. 3W-6070 [1] LEVER  
24. 4L-6459 [2] BOLT (3/8-16X2.5-IN)  
25. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
26. 3W-6050 [1] LEVER  
27. 5D-0353 [2] BOLT-LOCKING (3/8-16X1-IN)  
28. 2B-0941 [2] SPACER (10.5X19X19-MM THK)  
29. 9R-1587 [1] SPRING  
30. 9U-9138 [1] BRACKET  
31. 5H-7152 [1] SPRING  
32. 8H-9186 [2] SPRING  
33. 8H-9182 [2] ROLLER-GOVERNOR CONTROL  
34. 6Y-0145 [1] PLATE-LOCK  
35. 1B-8704 [2] KEY-WOODRUFF  
36. 8T-0798 [2] BEARING-ROLLER  
37. 8T-0741 [2] SEAL-LIP TYPE  
38. 3W-6077 [1] SHAFT  
39. 9G-3385 [1] LEVER  
40. 3W-4474 [1] LEVER  
41. 5S-7382 [3] BOLT (3/8-16X1.375-IN)  
42. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
43. 5L-4041 [4] BOLT-12 POINT HEAD (1/4-20X1.5-IN)  
44. 8G-5106 [1] SHAFT AS  
45. 9U-9140 [1] ROD AS  
46. 4D-4064 [2] ROD END (3/8-24-THD)  
47. 9W-9687 [2] STUD  
48. 6V-8183 [4] NUT-FULL (3/8-24-THD)  
49. 8T-5353 [1] DOWEL  
 

#SEBP20210084
 

1W-2481: COVER GP-TACHOMETER DRIVE

1W-2481 COVER GP-TACHOMETER DRIVE
S/N 09Z10600-UP
PART OF 4P-9070 ENGINE AR
i00121977 SEBP2021
1W2481 COVER GP-TACHOMETER DRIVE Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-7629 [1] COVER  
2. 4M-8303 [1] SEAL-O-RING  
3. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
4. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
 

#SEBP20210085
 

7C-8995: FASTENER GP-FUEL INJ PUMP

7C-8995 FASTENER GP-FUEL INJ PUMP
S/N 09Z10600-UP
PART OF 6I-0883 PUMP GP-GOV & FUEL INJ
i00608353 SEBP2021
7C8995 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1761 [4] BOLT (1/4-20X6.5-IN)  
2. 9S-4191 [1] PLUG (9/16-18-THD)  
3. 4F-7957 [6] BOLT (1/4-20X0.875-IN)  
4. 2S-7383 [1] BOLT (1/4-20X3.25-IN)  
5. 8F-8178 [2] BOLT (1/4-20X3.25-IN)  
6. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
7. 8B-2377 [1] BOLT (1/4-20X2-IN)  
8. 0S-1614 [2] BOLT (1/4-20X0.5-IN)  
9. 8B-2377 B [1] BOLT (1/4-20X2-IN)  
  B   USE AS REQUIRED
 

#SEBP20210086
 

6I-1382: FILTER & LINES GP-FUEL

6I-1382 FILTER & LINES GP-FUEL
S/N 09Z10600-UP
PART OF 4P-9070 ENGINE AR
i00392272 SEBP2021
6I1382 FILTER & LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 4P-5722 [1] BASE AS-FILTER  
  4N-3294 [1] INSERT-FUEL FILTER  
3. 6I-1667 [1] TUBE AS  
4. 6V-3297 [1] TEE-O-RING PORT  
5. 7C-4456 [1] SUPPORT-FUEL FILTER  
6. 103-1047 I [1] HOSE AS  
7. 137-5541 [1] PUMP GP-FUEL PRIMING  
  061-7539 [1] SEAL-O-RING  
  229-3218 [2] VALVE AS  
8. 030-7942 [1] ELBOW  
9. 030-7947 [2] ELBOW  
10. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
11. 1A-2029 [3] BOLT (3/8-16X1.125-IN)  
12. 1A-9579 [1] BOLT (5/16-18X1.5-IN)  
13. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
14. 2B-0941 [1] SPACER (10.5X19X19-MM THK)  
15. 2H-0435 [2] CLAMP  
16. 3J-1907 [4] SEAL-O-RING  
17. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5M-6213 [1] PLUG-PIPE  
19. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 7X-2501 [1] BOLT (1/4-20X1.25-IN)  
21. 8C-6561 [1] BOLT (5/16-18X1.375-IN)  
22. 9L-9132 [2] WASHER (10.2X25.5X2.5-MM THK)  
23. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
24. 9M-8406 [1] CLIP (LOOP)  
25. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP20210087
 

1W-8730: GOVERNOR GP

1W-8730 GOVERNOR GP
S/N 09Z10600-UP
PART OF 6I-0883 PUMP GP-GOV & FUEL INJ
i00196399 SEBP2021
1W8730 GOVERNOR GP Parts scheme 1W8730 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6523 C [1] PLUG  
2. 8N-3259 C [1] COVER-HIGH IDLE  
  6I-2003 C [1] GASKET  
3. 7N-2594 C [1] SETSCREW-SLOTTED  
  7N-8775 C [1] NUT-HIGH IDLE  
4. 5P-6945 C [2] BOLT (1/4-20X1.125-IN)  
  5P-0537 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 3J-7354 C [1] SEAL-O-RING  
6. 4N-5485 C [1] BODY-VALVE  
  5F-9144 C [1] SEAL-O-RING  
7. 4N-5484 C [1] VALVE-NEEDLE  
  6H-9691 C [1] SEAL-O-RING  
8. 0S-1616 C [6] BOLT (1/4-20X1-IN)  
9. 151-5226 [1] COVER AS  
10. 138-9507 [1] SEAL-LIP TYPE  
11. 7N-8779 C [1] GASKET-COVER  
12. 3P-0009 C [1] INSULATOR  
13. 1P-2497 C [2] BOLT-HEAD  
  8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 8N-3258 C [1] COVER-LOAD STOP  
  6I-2004 C [1] GASKET  
15. 7N-8785 [1] SHAFT-PIVOT  
16. 1N-3800 [1] SLEEVE-RACK CONTROL  
17. 6N-3504 [1] SEAT-GOVERNOR SPRING  
18. 2W-2216 [1] SPRING-LINK  
19. 2M-7819 [2] RING-RETAINING  
20. 1N-3802 [1] SEAT-SPRING  
21. 8N-2507 [1] PISTON AS-SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7C-0791 [1] CYLINDER AS  
  7N-7271 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
22. 1W-4098 [1] PISTON-GOVERNOR SERVO  
23. 7W-0250 [1] SLEEVE  
24. 5P-9757 [1] SEAL-O-RING  
25. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
26. 4N-2953 [1] RING-LOCK  
27. 7E-4892 [2] RACE-THRUST BEARING  
28. 7M-7219 [1] BEARING-THRUST  
29. 4W-6868 [1] RISER-GOVERNOR  
30. 4N-0432 [1] BALL BEARING  
31. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (12.7MM LG)  
  4F-6024 [2] PIN (8MM LG)  
32. 8N-2503 [1] ACTUATOR AS-GOVERNOR  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
33. 4N-6404 [1] RING-RETAINING  
34. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
35. 2N-0828 [2] WASHER (SPRING)  
36. 8N-2496 C [1] GASKET-GOVERNOR HOUSING  
37. 7N-7270 C [2] SLEEVE-SPRING  
38. 7N-8821 C [2] RING-RETAINING  
39. 3K-5733 C [1] SPRING  
40. 8N-2501 C [1] HOUSING AS-GOVERNOR  
  7E-5346 C [1] VALVE AS  
  8N-3945 [1] BUSHING-TERMINAL  
41. 8N-2499 C [1] SPRING-GUIDE  
42. 3D-8317 C [1] RING-RETAINING  
43. 4N-0260 C [1] SEAL-LIP TYPE  
44. 2F-2290 C [1] PLUG-CORE  
45. 7N-7267 [1] SPRING  
46. 6D-3897 [1] BOLT (8-32X0.5-IN)  
47. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
48. 2W-6104 [1] BLOCK AS-STOP  
  2W-6103 [1] DOWEL  
49. 1W-4243 [1] SPRING-BUMPER  
50. 2W-5161 [1] BOLT-LOAD STOP  
51. 8N-3256 [1] COLLAR-LOAD STOP  
52. 8L-5832 C [1] NUT-HEX (10-32-THD)  
53. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
    -OR-
  9Y-4701 C [1] SETSCREW-SOCKET (10-32X1.38-IN)  
54. 7N-8821 [1] RING-RETAINING  
55. 8N-3168 [1] LEVER-THROTTLE  
56. 2W-9305 [2] PLATE-THROTTLE  
57. 2W-6102 [1] LEVER-SPRING SEAT  
58. 7N-2594 [1] SETSCREW-SLOTTED  
  7W-4272 [1] NUT-SEALING (5/16-18-THD)  
59. 7N-2171 [4] RING-RETAINING  
60. 7N-2172 [2] PIN  
61. 8N-3087 [1] STOP-IDLE DETENT  
62. 2W-7400 [1] SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20210088
 

8G-4060: LINES GP-FUEL

8G-4060 LINES GP-FUEL
S/N 8PJ1-183; 9GJ1-408
PART OF 8E-8669 CHASSIS AR
i00420564 SEBP2021
8G4060 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0484 C [2] ELBOW  
2. 6V-8628 C [1] ELBOW  
3. 3J-7354 [2] SEAL-O-RING  
4. 067-2935 C [1] FITTING-PIPE  
5. 5P-1442 CE HOSE (77 CM)  
6. 6V-8397 [2] SEAL-O-RING  
7. 6Y-2212 C [1] BRACKET AS  
  9F-2978 [1] NUT-WELD (3/8-16-THD)  
8. 9U-8998 C [1] TUBE AS  
9. 4D-7794 [2] CLIP  
10. 5P-4961 C [3] CLAMP-HOSE  
11. 4D-9517 C [1] CLIP  
12. 9M-8406 C [1] CLIP (LOOP)  
13. 8T-4896 C [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 4L-6454 C [1] BOLT (3/8-16X1-IN)  
15. 9U-8997 C [1] TUBE AS  
16. 8M-2772 [2] CLIP (LOOP)  
17. 6V-8801 [2] NUT (3/8-16-THD)  
18. 8G-6535 [1] TUBE AS  
19. 8G-6537 [1] TUBE AS  
20. 8T-0080 [2] VALVE-BALL  
21. 4J-5477 C [2] SEAL-O-RING  
22. 6V-8636 [1] CONNECTOR  
23. 3J-1907 [6] SEAL-O-RING  
24. 8F-8513 [1] CLIP  
25. 5P-1442 E HOSE (74 CM)  
26. 5P-1046 [1] CONNECTOR  
27. 8G-6778 CI [1] HOSE AS  
28. 6V-8628 C [1] ELBOW  
29. 1P-4278 [1] CLAMP-HOSE  
30. 5P-9297 B [1] CLIP  
  8M-2770 B [1] CLIP (LOOP)  
  6V-8801 B [1] NUT (3/8-16-THD)  
31. 4L-6454 B [2] BOLT (3/8-16X1-IN)  
32. 8T-4896 B [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP20210089
 

8G-4060: LINES GP-FUEL

8G-4060 LINES GP-FUEL
S/N 8PJ184-99999; 9GJ409-99999
PART OF 8E-8669 CHASSIS AR
i00566119 SEBP2021
8G4060 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0484 [2] ELBOW  
2. 6V-8628 [2] ELBOW  
3. 3J-7354 [2] SEAL-O-RING  
4. 067-2935 [1] FITTING-PIPE  
5. 5P-1442 CE HOSE (58CM)  
6. 6V-8397 [2] SEAL-O-RING  
7. 102-3594 C [1] BRACKET AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
8. 9U-8998 [1] TUBE AS  
9. 4D-7794 [2] CLIP  
10. 5P-4961 [3] CLAMP-HOSE  
11. 8T-4223 C [1] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 9M-8406 [1] CLIP (LOOP)  
13. 8T-4896 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 4L-6454 [3] BOLT (3/8-16X1-IN)  
15. 9U-8997 [1] TUBE AS  
16. 8M-2772 [2] CLIP (LOOP)  
17. 6V-8801 [3] NUT (3/8-16-THD)  
18. 8G-6535 [1] TUBE AS  
19. 8G-6537 [1] TUBE AS  
20. 8T-0080 [2] VALVE-BALL  
21. 4J-5477 [2] SEAL-O-RING  
22. 6V-8636 [1] CONNECTOR  
23. 3J-1907 [6] SEAL-O-RING  
24. 8F-8513 [1] CLIP  
25. 5P-1442 E HOSE (74CM)  
26. 5P-1046 [1] CONNECTOR  
27. 8G-6778 I [1] HOSE AS  
28. 1P-4278 [1] CLAMP-HOSE  
29. 1P-4278 [1] CLAMP-HOSE  
30. 5P-9297 [1] CLIP  
31. 8T-4835 C [1] BOLT (1/2-13X2-IN)  
33. 8M-2770 C [2] CLIP (LOOP)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Special Instruction
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Disassembly and Assembly
Turbocharger - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/09
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22

Caterpillar Parts SIS Catalog D4H XL :

TURBOCHARGER GP
7N-4650 TURBOCHARGER GP
SHIELD GP-EXHAUST
7W-5673 SHIELD GP-EXHAUST
PRESCREENER GP
5M-2734 PRESCREENER GP
PRECLEANER GP
4M-0310 PRECLEANER GP
PRECLEANER GP
121-7746 PRECLEANER GP
MUFFLER GP
6I-2070 MUFFLER GP
MUFFLER GP
6I-1780 MUFFLER GP
MANIFOLD GP-EXHAUST
2P-6571 MANIFOLD GP-EXHAUST
CAMSHAFT AS
2W-0262 CAMSHAFT AS
CONTROL GP-DECELERATOR
8G-3913 CONTROL GP-DECELERATOR
CONTROL GP-GOVERNOR
8E-8659 CONTROL GP-GOVERNOR
COVER GP-TACHOMETER DRIVE
1W-2481 COVER GP-TACHOMETER DRIVE
FASTENER GP-FUEL INJ PUMP
7C-8995 FASTENER GP-FUEL INJ PUMP
FILTER & LINES GP-FUEL
6I-1382 FILTER & LINES GP-FUEL
GOVERNOR GP
1W-8730 GOVERNOR GP
LINES GP-FUEL
8G-4060 LINES GP-FUEL

Truck sale:

CATERPILLAR D4H XL 1995
$22,000 USD 
CATERPILLAR D4H XL 1995
- TRACK TYPE TRACTORS
ALTORFER INC.
2600 6th Street SW - Cedar Rapids - Io
1996 CAT D4H XL
USD $29,500 
1996 CAT D4H XL

EM Rude LLC
Parkersburg, West Virginia
1987 CAT D4H XL
USD $25,088 
1987 CAT D4H XL

Santucci Macchine sas di Santucci F. & C
CAT D4H XL
USD $22,500 
CAT D4H XL

Cook Auction Company
Clinton, Missouri
CAT D4H XL
 
CAT D4H XL

McGrew Equipment Company
Seven Valleys, Pennsylvania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.