AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8E-9988 BULLDOZER AR-ANGLING S/N 7CH1-UP POWER ANGLE & TILT-LGP AN ATTACHMENT D4H XL TRACK-TYPE TRACTOR


IMPLEMENTS
BULLDOZER GP
C-FRAME GP
BULLDOZER GP

TRACK-TYPE TRACTOR D4H XL TRACK-TYPE TRACTOR 8PJ
 D4H XL D4H Series IIILGP Track-Type Tractors 8PJ00001-UP (MACHINE) POWERED BY 3304 Engine SEBP2021 D4H XL 8PJ   (1992)

IMPLEMENTS

BULLDOZER GP
PIN GP-CYLINDER
3G-8931 PIN GP-CYLINDER
8E-9987 BULLDOZER AR-ANGLING
8E-9988 BULLDOZER AR-ANGLING
8E-9158 BULLDOZER AR-PWR ANGLE & TILT
8E-9159 BULLDOZER AR-PWR ANGLE & TILT
8E-9995 BULLDOZER AR-STRAIGHT
8E-9996 BULLDOZER AR-STRAIGHT
PUSH ARM GP
6Y-1298 PUSH ARM GP
PUSH ARM GP
6Y-1298 PUSH ARM GP
TRUNNION GP-BULLDOZER
4T-5816 TRUNNION GP-BULLDOZER
 

#SEBP20210360
 

8E-9988: BULLDOZER AR-ANGLING

8E-9988 BULLDOZER AR-ANGLING
S/N 7CH1-UP
POWER ANGLE & TILT-LGP
AN ATTACHMENT
i00417852 SEBP2021
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6Y-6099 Y [1] BLADE GP-ANGLING  
  8E-9989 Y [1] C-FRAME GP-POWER ANGLING  
  9T-9247 Y [2] CYLINDER GP-ANGLING  
    -OR-
  100-6174 Y [2] CYLINDER GP-ANGLING  
  9T-9557 Y [1] CYLINDER GP-TILT  
  8E-2737 Y [1] SINGLETREE GP  
   
  8T-7371 [1] PLATE-SERIAL NUMBER  
    (ON BACK OF MOLDBOARD TOP RH END)
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20210361
 

8E-9158: BULLDOZER AR-PWR ANGLE & TILT

8E-9158 BULLDOZER AR-PWR ANGLE & TILT
S/N 6XH1-UP
POWER ANGLE & TILT
AN ATTACHMENT
i00416983 SEBP2021
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-9160 Y [1] BLADE GP-ANGLING  
  8E-9177 Y [1] C-FRAME GP-POWER ANGLING  
  3G-9226 Y [2] CYLINDER GP-BULLDOZER LIFT  
  9T-9247 Y [2] CYLINDER GP-ANGLING  
    -OR-
  100-6174 Y [2] CYLINDER GP-ANGLING  
  9T-9557 Y [1] CYLINDER GP-TILT  
  9U-8434 Y [1] LINES GP-ANGLE & TILT  
  3G-8931 Y [1] PIN GP-CYLINDER  
  8E-2737 Y [1] SINGLETREE GP  
   
  8T-7371 [1] PLATE-SERIAL NUMBER  
    (ON BACK OF MOLDBOARD TOP RH END)
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20210362
 

8E-9159: BULLDOZER AR-PWR ANGLE & TILT

8E-9159 BULLDOZER AR-PWR ANGLE & TILT
S/N 6XH1-UP
AN ATTACHMENT
i00416989 SEBP2021
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-9160 Y [1] BLADE GP-ANGLING  
  8E-9177 Y [1] C-FRAME GP-POWER ANGLING  
  9T-9247 Y [2] CYLINDER GP-ANGLING  
    -OR-
  100-6174 Y [2] CYLINDER GP-ANGLING  
  9T-9557 Y [1] CYLINDER GP-TILT  
  9U-8434 Y [1] LINES GP-ANGLE & TILT  
  8E-2737 Y [1] SINGLETREE GP  
  8T-7371 [1] PLATE-SERIAL NUMBER  
    (ON BACK OF MOLDBOARD TOP RH END)
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20210363
 

8E-9995: BULLDOZER AR-STRAIGHT

8E-9995 BULLDOZER AR-STRAIGHT
S/N 5SH1-99999
AN ATTACHMENT
i00417862 SEBP2021
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-2265 Y [1] BLADE GP-STRAIGHT  
  4T-4783 Y [2] CYLINDER GP-BULLDOZER LIFT  
  8G-2519 Y [1] FRAME GP-TRACK ROLLER  
  4T-1542 Y [1] LINES GP-TILT CYLINDER  
  8E-9997 Y [1] MOUNTING GP-CYLINDER  
  6Y-1298 Y [1] PUSH ARM GP  
  4T-5816 Y [1] TRUNNION GP-BULLDOZER  
   
  8T-7371 [1] PLATE-SERIAL NUMBER  
    (ON BACK OF MOLDBOARD TOP RH END)
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20210364
 

8E-9996: BULLDOZER AR-STRAIGHT

8E-9996 BULLDOZER AR-STRAIGHT
S/N 5SH1-99999
AN ATTACHMENT
i00417863 SEBP2021
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-2265 Y [1] BLADE GP-STRAIGHT  
  4T-1542 Y [1] LINES GP-TILT CYLINDER  
  6Y-1298 Y [1] PUSH ARM GP  
   
  8T-7371 [1] PLATE-SERIAL NUMBER  
    (ON BACK OF MOLDBOARD TOP RH END)
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20210365
 

8E-9177: C-FRAME GP-POWER ANGLING

8E-9177 C-FRAME GP-POWER ANGLING
S/N 6XH1-UP
PART OF 8E-9158, 8E-9159 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00417001 SEBP2021
8E9177 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-4436 [4] BOLT (1/2-13X1.375-IN)  
  8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 8E-6221 [1] PIN  
3. 4T-0231 [4] RETAINER  
4. 6Y-6771 [1] SPACER  
5. 4T-1312 [4] SPACER (45X50X24.5-MM THK)  
6. 6Y-6774 [1] PIN  
7. 6Y-6581 [1] RETAINER  
8. 7X-0379 [4] BOLT (7/8-9X1.5-IN)  
9. 6J-7500 [2] RETAINER  
10. 6Y-9132 [2] PIN  
11. 8E-9176 [2] BUSHING  
12. 3G-8932 [4] PIN  
13. 2G-5675 [4] WASHER (1.78X4X0.19-IN THK)  
14. 8D-4336 [12] WASHER-THRUST (76.6X146X1.90-MM THK)  
15. 6Y-6768 [1] SPACER  
16. 2G-5676 [12] WASHER (1.781X4X0.06-IN THK)  
17. 8T-9398 [2] BOLT (3/4-10X1.75-IN)  
18. 6Y-6955 [1] SPACER (64X71.5X93-MM THK)  
19. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
20. 7K-6058 [1] BOLT-12 POINT HEAD (1/2-13X2.5-IN)  
21. 8E-9178 [1] C-FRAME AS  
  9P-7849 [6] BOSS  
  3G-8887 [1] COLLAR  
22. 8E-1519 [2] BRACKET  
23. 8E-9179 [1] TOWER AS  
  8E-9180 [1] TOWER AS  
24. 8P-9770 [1] PLATE  
25. 9W-5375 [2] BAR  
26. 6Y-6119 [1] TOWER AS  
27. 6Y-4388 [1] BEARING-THRUST  
28. 6D-0217 [2] BUSHING  
29. 6Y-6235 [1] BEARING  
30. 6Y-6234 [2] BEARING  
31. 8E-6222 [1] PIN AS  
 

#SEBP20210366
 

8E-9177: C-FRAME GP-POWER ANGLING

8E-9177 C-FRAME GP-POWER ANGLING
S/N 6XH1-99999
PART OF 8E-9158, 8E-9159 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00417005 SEBP2021
8E9177 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-4436 [4] BOLT (1/2-13X1.375-IN)  
  8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 8E-6221 [1] PIN  
3. 4T-0231 [4] RETAINER  
4. 6Y-6771 [1] SPACER  
5. 4T-1312 [4] SPACER (45X50X24.5-MM THK)  
6. 6Y-6774 [1] PIN  
7. 6Y-6581 [1] RETAINER  
8. 7X-0379 [4] BOLT (7/8-9X1.5-IN)  
9. 6J-7500 [2] RETAINER  
10. 104-3228 C [2] PIN  
11. 8W-4523 C [2] BUSHING  
12. 3G-8932 [4] PIN  
13. 2G-5675 [4] WASHER (1.78X4X0.19-IN THK)  
14. 8D-4336 [12] WASHER-THRUST (76.6X146X1.90-MM THK)  
15. 6Y-6768 [1] SPACER  
16. 2G-5676 [12] WASHER (1.781X4X0.06-IN THK)  
17. 8T-9398 [2] BOLT (3/4-10X1.75-IN)  
18. 9X-7392 C [4] SEAL-LIP TYPE  
19. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
20. 7K-6058 [1] BOLT-12 POINT HEAD (1/2-13X2.5-IN)  
21. 8E-9178 [1] C-FRAME AS  
  9P-7849 [6] BOSS  
  3G-8887 [1] COLLAR  
22. 8E-1519 [2] BRACKET  
23. 8E-9179 [1] TOWER AS  
  8E-9180 [1] TOWER AS  
24. 8P-9770 [1] PLATE  
25. 9W-5375 [2] BAR  
26. 6Y-6119 [1] TOWER AS  
27. 6Y-4388 [1] BEARING-THRUST  
28. 6D-0217 [2] BUSHING  
29. 6Y-6235 [1] BEARING  
30. 6Y-6234 [2] BEARING  
31. 8E-6222 [1] PIN AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20210367
 

8E-9989: C-FRAME GP-POWER ANGLING

8E-9989 C-FRAME GP-POWER ANGLING
S/N 7CH1-99999
PART OF 8E-9987, 8E-9988 BULLDOZER AR-ANGLING
AN ATTACHMENT
i00708713 SEBP2021
8E9989 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9990 [1] C-FRAME AS  
1A. 6Y-6119 [1] TOWER AS  
1B. 6Y-4388 [1] BEARING-THRUST  
1C. 6D-0217 [2] BUSHING  
1D. 6Y-6235 [1] BEARING  
1E. 6Y-6234 [2] BEARING  
1F. 6Y-6120 [1] TOWER AS  
  6S-0564 [1] PLATE  
1G. 4T-8921 [1] TOWER AS (RH)  
1H. 8E-1519 [2] BRACKET  
1J. 3G-8887 [1] COLLAR  
1K. 9W-5375 [2] BAR  
1L. 8P-9770 [1] PLATE  
1M. 9P-7849 [6] BOSS  
1N. 8E-6222 [1] PIN AS  
  8J-8489 F [7] BOSS  
1R. 4T-8922 [1] TOWER AS (LH)  
2. 6Y-6774 [1] PIN  
3. 4T-0231 [4] RETAINER  
4. 8C-4436 [4] BOLT (1/2-13X1.375-IN)  
5. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 4T-1312 [4] SPACER (45X50X24.5-MM THK)  
7. 6Y-6771 [1] SPACER  
8. 3G-8932 [4] PIN  
9. 7X-0379 [4] BOLT (7/8-9X1.5-IN)  
10. 6J-7500 [2] RETAINER  
11. 104-3228 [2] PIN  
12. 8W-4523 [2] BUSHING  
13. 8E-6221 [1] PIN  
14. 2G-5675 B [4] WASHER (1.78X4X0.19-IN THK)  
15. 8D-4336 B [12] WASHER-THRUST (76.6X146X1.90-MM THK)  
16. 6Y-6768 [1] SPACER  
17. 7K-6058 [1] BOLT-12 POINT HEAD (1/2-13X2.5-IN)  
18. 8T-9398 [2] BOLT (3/4-10X1.75-IN)  
19. 6Y-6581 [1] RETAINER  
20. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
21. 9X-7392 [4] SEAL-LIP TYPE  
22. 2G-5676 B [12] WASHER (1.781X4X0.06-IN THK)  
  B   USE AS REQUIRED
  F   NOT SHOWN
 

#SEBP20210368
 

6Y-1298: PUSH ARM GP

6Y-1298 PUSH ARM GP
S/N 5SH1-99999
PART OF 8E-9995, 8E-9996 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00388319 SEBP2021
6Y1298 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-1790 [1] BRACE AS  
  6J-0706 [1] EYE  
2. 8E-9212 CB [78] SHIM (0.8-MM THK)  
3. 4J-0121 [3] CAP AS-BEARING  
4. 7X-0372 [12] BOLT (3/4-10X4.25-IN)  
5. 6V-8182 [4] NUT (3/4-10-THD)  
6. 3F-6185 [2] PIN  
  4F-0255 [2] PIN  
  3B-4627 [2] PIN-COTTER  
7. 4T-9519 [1] PUSH ARM AS (RH)  
8. 4T-9520 [1] PUSH ARM AS (LH)  
    (EACH PUSH ARM INCLUDES)
  8P-9770 [1] PLATE  
9. 4T-9194 [1] TRUNNION  
10. 4T-9061 [1] BEARING  
11. 4T-9510 [1] BRACKET  
12. 4T-9511 [1] BRACKET  
13. 4T-9060 [1] BEARING  
14. 1U-2533 [1] BAR  
15. 8T-8925 [4] BOLT (3/4-10X4.75-IN)  
16. 4F-2710 [12] NUT (3/4-10-THD)  
17. 160-6306 C [2] CAP-BEARING  
18. 1U-2568 Y [1] CYLINDER GP-TILT  
19. 8E-5701 CB [52] SHIM (0.8-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20210369
 

6Y-1298: PUSH ARM GP

6Y-1298 PUSH ARM GP
S/N 5SH1-UP
PART OF 8E-9995, 8E-9996 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00388315 SEBP2021
6Y1298 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D4H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-1790 [1] BRACE AS  
  6J-0706 [1] EYE  
2. 3J-6572 B [36] SHIM (0.5-MM THK)  
3. 4J-0121 [3] CAP AS-BEARING  
4. 7X-0372 [12] BOLT (3/4-10X4.25-IN)  
5. 6V-8182 [4] NUT (3/4-10-THD)  
6. 3F-6185 [2] PIN  
  4F-0255 [2] PIN  
  3B-4627 [2] PIN-COTTER  
7. 4T-9519 [1] PUSH ARM AS (RH)  
8. 4T-9520 [1] PUSH ARM AS (LH)  
    (EA. ARM AS. INCLS)
  8P-9770 [1] PLATE  
9. 4T-9194 [1] TRUNNION  
10. 4T-9061 [1] BEARING  
11. 4T-9510 [1] BRACKET  
12. 4T-9511 [1] BRACKET  
13. 4T-9060 [1] BEARING  
14. 1U-2533 [1] BAR  
15. 8T-8925 [4] BOLT (3/4-10X4.75-IN)  
16. 4F-2710 [12] NUT (3/4-10-THD)  
17. 6F-3183 [2] CAP-BEARING  
18. 1U-2568 Y [1] CYLINDER GP-TILT  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D4H XL :

8E-9987 BULLDOZER AR-ANGLING
VALVE GP-SELECTOR & PRESS CONT
3T-9927 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SELECTOR & PRESS CONT
3T-9924 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-RELIEF
6E-0772 VALVE GP-RELIEF
VALVE GP-PUMP CONTROL
9T-6859 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
244-6521 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
101-0960 VALVE GP-PUMP CONTROL
VALVE GP-PRESSURE CONTROL
3T-9926 VALVE GP-PRESSURE CONTROL
8E-9158 BULLDOZER AR-PWR ANGLE & TILT
8E-9159 BULLDOZER AR-PWR ANGLE & TILT
8E-9995 BULLDOZER AR-STRAIGHT
8E-9996 BULLDOZER AR-STRAIGHT
C-FRAME GP-POWER ANGLING
8E-9177 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
8E-9177 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
8E-9989 C-FRAME GP-POWER ANGLING
PUSH ARM GP
6Y-1298 PUSH ARM GP

Truck sale:

CATERPILLAR D4H XL 1995
$22,000 USD 
CATERPILLAR D4H XL 1995
- TRACK TYPE TRACTORS
ALTORFER INC.
2600 6th Street SW - Cedar Rapids - Io
1996 CAT D4H XL
USD $29,500 
1996 CAT D4H XL

EM Rude LLC
Parkersburg, West Virginia
1987 CAT D4H XL
USD $25,088 
1987 CAT D4H XL

Santucci Macchine sas di Santucci F. & C
CAT D4H XL
USD $22,500 
CAT D4H XL

Cook Auction Company
Clinton, Missouri
CAT D4H XL
 
CAT D4H XL

McGrew Equipment Company
Seven Valleys, Pennsylvania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.