AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G-9226 CYLINDER GP-BULLDOZER LIFT S/N 7CH1-UP; 4NK1-UP 108MM(4.26 IN.)BORE X 390MM(15.36 IN.)STROKE. LIFT (2 REQUIRED) PART OF 8E-9987 BULLDOZER AR-ANGLING AN ATTACHMENT D4H


HYDRAULIC SYSTEM
CYLINDER GP
HYDRAULIC GP

TRACK-TYPE TRACTOR D4H TRACK-TYPE TRACTOR 4NK
 D4H LGP Track-Type Tractor Direct Drive 4NK00001-UP (MACHINE) POWERED BY 3304 Engine SEBP2022 D4H 4NK   (1992)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & MTG GP-RIPPER
1U-0275 CYLINDER & MTG GP-RIPPER
CYLINDER GP-ANGLING
100-6174 CYLINDER GP-ANGLING
CYLINDER GP-ANGLING
9T-9247 CYLINDER GP-ANGLING
CYLINDER GP-BULLDOZER LIFT
3G-9226 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
4T-4783 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
3G-9892 CYLINDER GP-RIPPER
CYLINDER GP-TILT
1U-2568 CYLINDER GP-TILT
CYLINDER GP-TILT
9T-9557 CYLINDER GP-TILT
MOUNTING GP-CYLINDER
8E-9997 MOUNTING GP-CYLINDER
PIN GP-CYLINDER
3G-8931 PIN GP-CYLINDER
 

#SEBP20220270
 

3G-9226: CYLINDER GP-BULLDOZER LIFT

3G-9226 CYLINDER GP-BULLDOZER LIFT
S/N 7CH1-UP; 4NK1-UP
108MM(4.26 IN.)BORE X 390MM(15.36 IN.)STROKE. LIFT (2 REQUIRED)
PART OF 8E-9987 BULLDOZER AR-ANGLING
AN ATTACHMENT
i00365748 SEBP2022
3G9226 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-8422 [1] CYLINDER AS  
  3S-6191 [2] LUG  
  9T-8421 [1] BUSHING  
2. 6J-4003 [1] RING-WEAR  
3. 5J-7854 [1] SEAL AS  
4. 7J-9898 [1] PISTON  
5. 7J-9910 [1] CROWN  
6. 9T-9276 C [1] HEAD  
7. 1K-6981 [1] SEAL-LIP TYPE  
8. 9T-8423 [1] ROD AS  
  9T-8421 [1] BUSHING  
9. 5J-8200 [1] SEAL-U-CUP  
10. 5J-7865 [1] RING-BACKUP  
11. 6J-6917 [1] SEAL-RING  
12. 3S-1349 [1] WASHER-HARD (31X52.5X6-MM THK)  
13. 7J-9897 [1] BOLT-LOCKING (1-1/8-7X3.5-IN)  
14. 3B-8489 C [1] FITTING-GREASE (1/8-27 PTF)  
15. 1H-6227 [1] SEAL-O-RING  
16. 4T-5613 C [1] RING-WEAR  
17. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20220271
 

4T-4783: CYLINDER GP-BULLDOZER LIFT

4T-4783 CYLINDER GP-BULLDOZER LIFT
S/N 5SH1-UP; 4NK1-UP
95.25MM(3.75 IN.) BORE X 590MM(23.24 IN.)STROKE
PART OF 8E-9995 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00376682 SEBP2022
4T4783 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4782 [1] CYLINDER AS  
2. 1K-6985 [2] RING-RETAINING  
3. 9J-7964 [1] BEARING-SPHERICAL  
4. 7J-5639 [1] BOLT-LOCKING (1-14X2.5-IN)  
5. 5P-8250 [1] WASHER (28X49X5-MM THK)  
6. 8J-6245 [1] RING-WEAR  
7. 5J-8011 [1] SEAL AS  
8. 8J-6016 [1] PISTON  
9. 8J-6020 [1] CROWN  
10. 8E-9212 B [16] SHIM (0.8-MM THK)  
11. 167-2459 [1] SEAL-WIPER  
12. 167-2307 [1] SEAL-U-CUP  
13. 167-2200 [1] SEAL AS  
14. 1S-0669 [1] RING (BACKUP)  
15. 2H-4145 [1] SEAL-O-RING  
16. 8J-6019 [1] HEAD  
17. 4T-4778 [1] ROD AS  
18. 0S-1627 [4] BOLT (3/4-10X4.5-IN)  
19. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
20. 4J-0121 [1] CAP AS-BEARING  
   
    AVAILABLE REPAIR KIT(S):
  185-9509 [1] KIT-SEAL  
    (INCLUDES RINGS & SEALS)
  185-9522 KIT-SEAL  
    (INCLUDES RINGS & SEALS)
  B   USE AS REQUIRED
 

#SEBP20220272
 

3G-9892: CYLINDER GP-RIPPER

3G-9892 CYLINDER GP-RIPPER
S/N 6ZH1-UP
102-MM (4-IN) BORE X 451-MM (17.75-IN) STROKE
PART OF 1U-0275 CYLINDER & MTG GP-RIPPER
AN ATTACHMENT
i00365834 SEBP2022
3G9892 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6214 [1] PLUG (1/8-27 PTF)  
2. 6J-2797 JP [1] RING-WEAR  
3. 5J-5402 JP [1] SEAL AS  
4. 7J-6469 [1] PISTON  
5. 1U-0399 [1] CYLINDER AS  
5A. 9T-7045 [1] ELBOW  
6. 289-2935 JNP [1] SEAL AS-BUFFER  
7. 289-2946 JNP [1] SEAL-U-CUP  
8. 7J-6461 [1] CROWN  
9. 1U-0398 [1] ROD AS  
10. 308-1845 JNP [1] SEAL-WIPER  
11. 4T-5613 JN [1] RING-WEAR  
12. 2K-6830 JP [1] RING-BACKUP  
13. 1H-8128 JP [1] SEAL-O-RING  
14. 9T-9258 [1] HEAD AS  
15. 5P-8250 [1] WASHER (28X49X5-MM THK)  
16. 7J-5639 [1] BOLT-LOCKING (1-14X2.5-IN)  
   
    AVAILABLE REPAIR KIT(S):
  233-9205 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (STANDARD SIZE BORE)
  233-9207 N [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (OVERSIZE BORE 0.76-MM)
  240-6899 P [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (STANDARD SIZE BORE)
    (ALL KITS ABOVE FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  N   KIT MARKED N SERVICES PART(S) MARKED N
  P   KIT MARKED P SERVICES PART(S) MARKED P
 

#SEBP20220273
 

1U-2568: CYLINDER GP-TILT

1U-2568 CYLINDER GP-TILT
S/N 5SH1-UP
108 MM (4.26 IN) BORE X 155 MM (6.11 IN) STROKE
PART OF 6Y-1298 PUSH ARM GP
AN ATTACHMENT
i00354106 SEBP2022
1U2568 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2569 [1] CYLINDER AS  
  7J-9884 [1] BEARING  
2. 7J-9897 [1] BOLT-LOCKING (1-1/8-7X3.5-IN)  
3. 3S-1349 [1] WASHER-HARD (31X52.5X6-MM THK)  
4. 7J-9898 [1] PISTON  
5. 6J-4003 [1] RING-WEAR  
6. 5J-7854 [1] SEAL AS  
7. 4T-5101 [1] CROWN  
8. 1K-6981 [1] SEAL-LIP TYPE  
9. 1U-3156 [1] ROD AS  
10. 5J-8200 [1] SEAL-U-CUP  
11. 5J-7865 [1] RING-BACKUP  
12. 1H-6227 [1] SEAL-O-RING  
13. 6J-6917 [1] SEAL-RING  
14. 9T-9276 C [1] HEAD  
15. 3K-3318 [4] BOLT (3/4-10X4.25-IN)  
  2J-3506 [4] NUT-FULL (3/4-10-THD)  
16. 4J-0121 [1] CAP AS-BEARING  
17. 8E-9212 B [16] SHIM (0.8-MM THK)  
18. 4T-5613 C [1] RING-WEAR  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20220274
 

9T-9557: CYLINDER GP-TILT

9T-9557 CYLINDER GP-TILT
S/N 7CH1-UP
107.95 MM (4.25 IN.)BORE X 170 MM (6.70 IN) STROKE
PART OF 8E-9987, 8E-9988 BULLDOZER AR-ANGLING
AN ATTACHMENT
i00437600 SEBP2022
9T9557 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 7J-5639 [1] BOLT-LOCKING (1-14X2.5-IN)  
3. 5P-8250 [1] WASHER (28X49X5-MM THK)  
4. 6J-7264 J [1] RING-WEAR  
5. 5J-7854 J [1] SEAL AS  
6. 4T-0500 [1] PISTON  
7. 9T-9276 [1] HEAD  
8. 4T-5613 J [1] RING-WEAR  
9. 1H-6227 J [1] SEAL-O-RING  
10. 5J-7865 J [1] RING-BACKUP  
11. 7J-9910 [1] CROWN  
12. 289-2935 J [1] SEAL AS-BUFFER  
13. 308-1845 J [1] SEAL-WIPER  
14. 289-2946 J [1] SEAL-U-CUP  
15. 9T-9562 [1] CYLINDER AS  
15A. 7J-1309 [1] BEARING  
  1S-3311 [1] RING-RETAINING  
  1U-1730 [2] LUG  
  9T-7045 [2] ELBOW  
16. 6E-1455 [1] ROD AS  
16A. 9J-7964 [1] BEARING-SPHERICAL  
  1K-6985 [1] RING-RETAINING  
   
    AVAILABLE REPAIR KIT(S):
  137-8662 J [1] KIT-HYDRAULIC CYLINDER SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP20220275
 

8G-6905: HYDRAULIC AR

8G-6905 HYDRAULIC AR
S/N 4NK1-UP
LIFT & TILT
AN ATTACHMENT
i00422700 SEBP2022
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8G-4479 Y [1] CONTROL GP-HYDRAULIC HAND (LIFT)  
  8G-4481 Y [1] CONTROL GP-HYDRAULIC HAND (TILT)  
  8G-6452 Y [1] LINES GP-LIFT CYLINDER  
  8G-4489 Y [1] LINES GP-PUMP  
  8G-4487 Y [1] LINES GP-TILT CYLINDER  
  8G-4478 Y [1] MOUNTING GP-CONTROL VALVE  
  9T-0290 Y [1] PUMP GP-PISTON  
    -OR-
  9T-4104 Y [1] PUMP GP-PISTON  
  1U-2741 Y [1] TANK & FILTER GP-HYDRAULIC  
  9T-6700 Y [1] VALVE GP-BANK  
  3W-6641 Y [1] WIRING GP-HYDRAULIC  
   
  5P-9884 [1] FILM-IDENTIFICATION (HYDRAULIC OIL)  
    (ON TOP OF HOOD ADJACENT TO HYDRAULIC TANK FILLER SPOUT)
  1H-6227 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20220276
 

114-6631: HYDRAULIC AR-3 VALVE

114-6631 HYDRAULIC AR-3 VALVE
S/N 4NK1-UP
LIFT, TILT & RIPPER
AN ATTACHMENT
i00488071 SEBP2022
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8G-4482 Y [1] CONTROL GP-HYDRAULIC HAND (RIPPER)  
  8G-4479 Y [1] CONTROL GP-HYDRAULIC HAND (LIFT)  
  8G-4481 Y [1] CONTROL GP-HYDRAULIC HAND (TILT)  
  8G-6452 Y [1] LINES GP-LIFT CYLINDER  
  8G-4489 Y [1] LINES GP-PUMP  
  3W-2567 Y [1] LINES GP-RIPPER  
  8G-4487 Y [1] LINES GP-TILT CYLINDER  
  8G-4478 Y [1] MOUNTING GP-CONTROL VALVE  
  9T-4104 Y [1] PUMP GP-PISTON  
  1U-2741 Y [1] TANK & FILTER GP-HYDRAULIC  
  9T-6702 Y [1] VALVE GP-BANK  
  3W-6641 Y [1] WIRING GP-HYDRAULIC  
  1H-6227 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20220277
 

8G-4469: HYDRAULIC AR-3 VALVE

8G-4469 HYDRAULIC AR-3 VALVE
S/N 4NK1-UP
LIFT, TILT & RIPPER
AN ATTACHMENT
i00421473 SEBP2022
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8G-4479 Y [1] CONTROL GP-HYDRAULIC HAND (LIFT)  
  8G-4481 Y [1] CONTROL GP-HYDRAULIC HAND (TILT)  
  8G-4483 Y [1] LINES GP-LIFT CYLINDER  
  8G-4489 Y [1] LINES GP-PUMP  
  3W-2567 Y [1] LINES GP-RIPPER  
  8G-4487 Y [1] LINES GP-TILT CYLINDER  
  8G-4478 Y [1] MOUNTING GP-CONTROL VALVE  
  9T-0290 Y [1] PUMP GP-PISTON  
    -OR-
  9T-4104 Y [1] PUMP GP-PISTON  
  1U-2741 Y [1] TANK & FILTER GP-HYDRAULIC  
  9T-6702 Y [1] VALVE GP-BANK  
  3W-6641 Y [1] WIRING GP-HYDRAULIC  
   
  5P-9884 [1] FILM-IDENTIFICATION (HYDRAULIC OIL)  
    (ON TOP OF HOOD ADJACENT TO HYDRAULIC TANK FILLER SPOUT)
  1H-6227 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20220278
 

8G-4470: HYDRAULIC AR-3 VALVE

8G-4470 HYDRAULIC AR-3 VALVE
S/N 4NK1-UP
LIFT, TILT & ANGLING
AN ATTACHMENT
i00421477 SEBP2022
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8G-4481 Y [1] CONTROL GP-HYDRAULIC HAND (TILT)  
  8G-4479 Y [1] CONTROL GP-HYDRAULIC HAND (LIFT)  
  8G-4480 Y [1] CONTROL GP-HYDRAULIC HAND (ANGLING)  
  8G-4485 Y [1] LINES GP-ANGLE & TILT  
  8G-4484 Y [1] LINES GP-LIFT CYLINDER  
  8G-4489 Y [1] LINES GP-PUMP  
  8G-4478 Y [1] MOUNTING GP-CONTROL VALVE  
  9T-0290 Y [1] PUMP GP-PISTON  
    -OR-
  9T-4104 Y [1] PUMP GP-PISTON  
  1U-2741 Y [1] TANK & FILTER GP-HYDRAULIC  
  9T-9183 Y [1] VALVE GP-BANK  
  3W-6641 Y [1] WIRING GP-HYDRAULIC  
   
  5P-9884 [1] FILM-IDENTIFICATION (HYDRAULIC OIL)  
    (ON TOP OF HOOD ADJACENT TO HYDRAULIC TANK FILLER SPOUT)
  1H-6227 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20220279
 

8G-4471: HYDRAULIC AR-4 VALVE

8G-4471 HYDRAULIC AR-4 VALVE
S/N 4NK1-UP
LIFT,TILT,ANGLING & RIPPER
AN ATTACHMENT
i00421482 SEBP2022
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8G-4482 Y [1] CONTROL GP-HYDRAULIC HAND (RIPPER)  
  8G-4481 Y [1] CONTROL GP-HYDRAULIC HAND (TILT)  
  8G-4480 Y [1] CONTROL GP-HYDRAULIC HAND (ANGLING)  
  8G-4479 Y [1] CONTROL GP-HYDRAULIC HAND (LIFT)  
  8G-4485 Y [1] LINES GP-ANGLE & TILT  
  8G-4484 Y [1] LINES GP-LIFT CYLINDER  
  8G-4489 Y [1] LINES GP-PUMP  
  8G-4488 Y [1] LINES GP-RIPPER  
  8G-4478 Y [1] MOUNTING GP-CONTROL VALVE  
  9T-0290 Y [1] PUMP GP-PISTON  
    -OR-
  9T-4104 Y [1] PUMP GP-PISTON  
  1U-2741 Y [1] TANK & FILTER GP-HYDRAULIC  
  9T-9184 Y [1] VALVE GP-BANK 4  
  3W-6641 Y [1] WIRING GP-HYDRAULIC  
   
  5P-9884 [1] FILM-IDENTIFICATION (HYDRAULIC OIL)  
    (ON TOP OF HOOD ADJACENT TO HYDRAULIC TANK FILLER SPOUT)
  1H-6227 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D4H :

CYLINDER GP-ANGLING
9T-9247 CYLINDER GP-ANGLING
CYLINDER GP-ANGLING
100-6174 CYLINDER GP-ANGLING
CYLINDER & MTG GP-RIPPER
1U-0275 CYLINDER & MTG GP-RIPPER
VALVE GP-STEERING & BRAKE CONT
3T-6498 VALVE GP-STEERING & BRAKE CONT
CONTROL GP-SERVICE BRAKE
9G-2339 CONTROL GP-SERVICE BRAKE
CLUTCH & BRAKE GP-STEERING
3W-2411 CLUTCH & BRAKE GP-STEERING
8G-9045 UNDERCARRIAGE AR
8E-4973 TRACK GP
CYLINDER GP-BULLDOZER LIFT
4T-4783 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
3G-9892 CYLINDER GP-RIPPER
CYLINDER GP-TILT
1U-2568 CYLINDER GP-TILT
CYLINDER GP-TILT
9T-9557 CYLINDER GP-TILT
8G-6905 HYDRAULIC AR
114-6631 HYDRAULIC AR-3 VALVE
8G-4469 HYDRAULIC AR-3 VALVE
8G-4470 HYDRAULIC AR-3 VALVE

Truck sale:

Caterpillar D4H
 
Caterpillar D4H
- Crawler dozers
N C MACHINERY CO.
Caterpillar D4H
 
Caterpillar D4H
- Crawler dozers
N C MACHINERY CO.
 
22,500 
Caterpillar D4H, Crawler dozers, Construction


Caterpillar D4H
 
Caterpillar D4H
- Crawler dozers
CARTER MACHINERY COMPANY, INC.
Caterpillar D4H
 
Caterpillar D4H
- Crawler dozers
CARTER MACHINERY COMPANY, INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.