AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4T-5261 EDGE GP-BIT & CUTTING S/N 5SH1-UP; 7CH1-UP PART OF 6Y-6099 BLADE GP-ANGLING, 8E-2265 BLADE GP-STRAIGHT AN ATTACHMENT D4H


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
WINCH GP

TRACK-TYPE TRACTOR D4H TRACK-TYPE TRACTOR 4NK
 D4H LGP Track-Type Tractor Direct Drive 4NK00001-UP (MACHINE) POWERED BY 3304 Engine SEBP2022 D4H 4NK   (1992)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
4T-5504 BIT GP-END
EDGE GP-BIT & CUTTING
4T-5261 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2814 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2815 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2816 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2817 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2818 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2819 EDGE GP-BIT & CUTTING
TOOTH GP-RIPPER
3G-0109 TOOTH GP-RIPPER
 

#SEBP20220470
 

4T-5261: EDGE GP-BIT & CUTTING

4T-5261 EDGE GP-BIT & CUTTING
S/N 5SH1-UP; 7CH1-UP
PART OF 6Y-6099 BLADE GP-ANGLING, 8E-2265 BLADE GP-STRAIGHT
AN ATTACHMENT
i00376807 SEBP2022
4T5261 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9379 [1] BIT-END (RH)  
  8E-9378 [1] BIT-END (LH)  
2. 4T-8940 [2] EDGE-CUTTING  
3. 5J-4773 [24] BOLT-PLOW (3/4-10X2.5-IN)  
4. 5P-8248 [24] WASHER-HARD (20X36.5X3.5-MM THK)  
5. 2J-3506 [24] NUT-FULL (3/4-10-THD)  
 

#SEBP20220471
 

507-2814: EDGE GP-BIT & CUTTING

507-2814 EDGE GP-BIT & CUTTING
S/N 4NK1-UP
19-MM. LEVEL CUT
FIELD INSTALLATION
i07393310 SEBP2022
5072814 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6659 [2] EDGE-CUTTING  
2. 323-4279 [1] BIT-END (RH)  
3. 323-4280 [1] BIT-END (LH)  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP20220472
 

507-2815: EDGE GP-BIT & CUTTING

507-2815 EDGE GP-BIT & CUTTING
S/N 4NK1-UP
16-MM. LEVEL CUT, REVERSIBLE
FIELD INSTALLATION
i07394781 SEBP2022
5072815 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4285 [2] BIT-END  
2. 8E-9377 [2] EDGE-CUTTING  
3. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
4. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP20220473
 

507-2816: EDGE GP-BIT & CUTTING

507-2816 EDGE GP-BIT & CUTTING
S/N 4NK1-UP
19-MM. GENERAL DUTY
FIELD INSTALLATION
i07393472 SEBP2022
5072816 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6659 [2] EDGE-CUTTING  
2. 140-6787 [1] BIT-END (RH)  
3. 140-6788 [1] BIT-END (LH)  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP20220474
 

507-2817: EDGE GP-BIT & CUTTING

507-2817 EDGE GP-BIT & CUTTING
S/N 4NK1-UP
19-MM. EXTENDED CUT
FIELD INSTALLATION
i07393291 SEBP2022
5072817 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-5407 [1] BIT-END (RH)  
2. 4T-5408 [1] BIT-END (LH)  
3. 4T-6659 [2] EDGE-CUTTING  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP20220475
 

507-2818: EDGE GP-BIT & CUTTING

507-2818 EDGE GP-BIT & CUTTING
S/N 4NK1-UP
19-MM. ABRASION RESISTANT MATERIAL
FIELD INSTALLATION
i07393282 SEBP2022
5072818 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6659 [2] EDGE-CUTTING  
2. 473-9970 [1] BIT-END (LH)  
3. 473-9971 [1] BIT-END (RH)  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP20220476
 

507-2819: EDGE GP-BIT & CUTTING

507-2819 EDGE GP-BIT & CUTTING
S/N 4NK1-UP
16-MM. REVERSIBLE, LEVEL CUT
FIELD INSTALLATION
i07393473 SEBP2022
5072819 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4285 [2] BIT-END  
2. 3G-9306 [2] EDGE-CUTTING  
3. 2J-3506 [20] NUT-FULL (3/4-10-THD)  
4. 5J-4773 [20] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [20] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP20220477
 

6T-1531: FAIRLEAD GP-WINCH

6T-1531 FAIRLEAD GP-WINCH
S/N 4NK1-UP
AN ATTACHMENT
i00401980 SEBP2022
6T1531 FAIRLEAD GP-WINCH Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-7287 [2] SHAFT  
2. 3B-8489 C [6] FITTING-GREASE (1/8-27 PTF)  
3. 0S-0509 C [6] BOLT (3/8-16X0.75-IN)  
4. 6T-7286 C [3] PLATE  
5. 9G-7735 [1] FRAME AS  
6. 6T-7288 C [1] SHAFT  
7. 6D-7479 C [6] WASHER (1.531X2.38X0.105-IN THK)  
8. 6V-3204 C [6] SEAL-RING  
  6F-0711 C [6] SEAL-O-RING  
9. 3T-0390 C [1] ROLLER AS  
10. 3T-0389 [2] ROLLER AS  
11. 9G-7755 [2] PIN  
12. 9G-7756 [2] SUPPORT  
13. 3B-4647 [2] PIN-COTTER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20220478
 

6T-6986: GUIDE GP-ROLLER

6T-6986 GUIDE GP-ROLLER
S/N 4NK1-UP
AN ATTACHMENT
i00405230 SEBP2022
6T6986 GUIDE GP-ROLLER Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-6984 [1] SUPPORT  
2. 6T-6985 [1] SUPPORT  
3. 8P-2933 [2] ROLLER-CABLE GUIDE  
4. 7J-9884 [4] BEARING  
5. 2P-3558 [4] SLEEVE  
6. 2P-6884 [1] BAR AS  
7. 8S-9092 [4] BOLT (5/8-11X2.25-IN)  
8. 2P-3559 [2] SHAFT AS  
    (EACH INLCUDES)
9. 9S-1307 [1] DOWEL  
 

#SEBP20220479
 

6Y-7230: KIT-WINCH CONVERSION

6Y-7230 KIT-WINCH CONVERSION
S/N 4NK1-UP
CONVERTS POWER SHIFT STANDARD SPEED TO DIRECT DRIVE STANDARD SPEED
AN ATTACHMENT
i00394835 SEBP2022
6Y7230 KIT-WINCH CONVERSION Parts scheme
  For full view, you need register

Parts for your D4H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-0239 [1] SEAL-O-RING  
2. 6T-2803 [1] GEAR (48-TEETH)  
3. 6T-2800 [1] GEAR-INPUT (35-TEETH)  
4. 9G-1593 [1] RETAINER-SEAL  
5. 9G-1589 [1] COUPLING  
6. 7G-7397 [1] GASKET  
7. 4B-8024 [1] SEAL-LIP TYPE  
8. 7G-9228 [2] SHIM PACK (INCLUDES 11-SHIMS)  
9. 7M-7260 B GASKET-LIQUID (8-OZ CAN)  
  B   USE AS REQUIRED
 

Information:

Special Instruction
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Caterpillar Parts SIS Catalog D4H :

COVER GP-SHIPPING
7G-4789 COVER GP-SHIPPING
CONVERSION GP-WINCH
6Y-7225 CONVERSION GP-WINCH
118-0024 CONVERSION AR-WINCH
CONTROL GP-WINCH
3T-9923 CONTROL GP-WINCH
CASE & COVERS GP-WINCH
9U-8162 CASE & COVERS GP-WINCH
BYPASS GP-FILTER
3T-9925 BYPASS GP-FILTER
BLADE GP-STRAIGHT
8E-2265 BLADE GP-STRAIGHT
BLADE GP-ANGLING
6Y-6099 BLADE GP-ANGLING
EDGE GP-BIT & CUTTING
507-2814 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2815 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2816 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2817 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2818 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2819 EDGE GP-BIT & CUTTING
FAIRLEAD GP-WINCH
6T-1531 FAIRLEAD GP-WINCH
GUIDE GP-ROLLER
6T-6986 GUIDE GP-ROLLER

Truck sale:

Caterpillar D4H
 
Caterpillar D4H
- Crawler dozers
N C MACHINERY CO.
Caterpillar D4H
 
Caterpillar D4H
- Crawler dozers
N C MACHINERY CO.
 
22,500 
Caterpillar D4H, Crawler dozers, Construction


Caterpillar D4H
 
Caterpillar D4H
- Crawler dozers
CARTER MACHINERY COMPANY, INC.
Caterpillar D4H
 
Caterpillar D4H
- Crawler dozers
CARTER MACHINERY COMPANY, INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.