AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8E-9886 BULLDOZER AR-SEMI-UNIVERSAL S/N 7BH1-99999 SEMI-UNIVERSAL AN ATTACHMENT D5H XL TRACK-TYPE TRACTOR


IMPLEMENTS
BULLDOZER GP
C-FRAME GP
LINKAGE GP
PIN GP
BULLDOZER GP
SINGLETREE GP
BULLDOZER GP

TRACK-TYPE TRACTOR D5H XL TRACK-TYPE TRACTOR 8RJ
 D5H Track-Type Tractor Power Shift XL 8RJ00001-UP (MACHINE) POWERED BY 3304 Engine SEBP2024 D5H XL 8RJ   (1991)

IMPLEMENTS

BULLDOZER GP
122-6593 BULLDOZER AR-SEMI-UNIVERSAL
6I-9268 BULLDOZER AR-SEMI-UNIVERSAL
8E-9886 BULLDOZER AR-SEMI-UNIVERSAL
8E-9492 BULLDOZER AR-UNIVERSAL
PUSH ARM GP
115-4472 PUSH ARM GP
PUSH ARM GP
9U-8225 PUSH ARM GP
 

#SEBP20240300
 

8E-9886: BULLDOZER AR-SEMI-UNIVERSAL

8E-9886 BULLDOZER AR-SEMI-UNIVERSAL
S/N 7BH1-99999
SEMI-UNIVERSAL
AN ATTACHMENT
i00417782 SEBP2024
  For full view, you need register

Parts for your D5H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9U-8228 Y [1] BLADE GP-SEMI-UNIVERSAL  
  1U-1839 Y [2] CYLINDER GP-BULLDOZER LIFT  
  6I-9489 Y [1] LINES GP-LIFT CYLINDER  
  9U-8224 Y [1] LINES GP-TILT  
  9U-8543 Y [1] MOUNTING GP-CYLINDER  
  9U-8225 Y [1] PUSH ARM GP  
  9U-8892 Y [1] TRUNNION GP-BULLDOZER  
   
  8T-7371 [1] PLATE-SERIAL NUMBER  
    BACK OF MOLDBOARD-NEAR TOP AT RH END
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20240301
 

8E-9492: BULLDOZER AR-UNIVERSAL

8E-9492 BULLDOZER AR-UNIVERSAL
S/N 7AH1-UP
AN ATTACHMENT
i00417349 SEBP2024
  For full view, you need register

Parts for your D5H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-9494 Y [1] BLADE GP-ANGLING  
  8E-9576 Y [1] C-FRAME GP-POWER ANGLING  
  6E-5400 Y [2] CYLINDER GP-BULLDOZER LIFT  
  9T-9558 Y [1] CYLINDER GP-TILT  
  9T-9273 Y [2] CYLINDER GP-ANGLING  
  8E-9287 Y [1] LINES GP-ANGLE & TILT  
  3G-8919 Y [1] PIN GP  
  8E-2796 Y [1] SINGLETREE GP  
   
  8T-7371 [1] PLATE-SERIAL NUMBER  
    BACK OF MOLDBOARD-NEAR TOP AT RH END
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20240302
 

8E-9576: C-FRAME GP-POWER ANGLING

8E-9576 C-FRAME GP-POWER ANGLING
S/N 7AH1-UP; 7ZH1-UP
PART OF 3A-8745 BULLDOZER AR-ANGLING, 8E-9493 BULLDOZER AR-PWR ANGLE & TILT, 8E-9492 BULLDOZER AR-UNIVERSAL
AN ATTACHMENT
i00417492 SEBP2024
8E9576 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D5H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2365 [2] RETAINER  
2. 7X-0379 [4] BOLT (7/8-9X1.5-IN)  
3. 8E-9214 [2] PIN  
4. 3G-8891 [4] SPACER (45X50X18-MM THK)  
5. 3G-8900 [4] PIN  
6. 4J-0805 B [14] WASHER (1.781X2.5X0.12-IN THK)  
7. 9S-1336 B [8] WASHER  
8. 8G-5243 [2] BEARING  
9. 6Y-6775 [1] PIN  
10. 6Y-6770 [2] SPACER (64X71X23.5-MM THK)  
11. 6Y-6773 [1] SPACER (64X71X55-MM THK)  
12. 6Y-6581 [1] RETAINER  
13. 7K-6058 [1] BOLT-12 POINT HEAD (1/2-13X2.5-IN)  
14. 8E-6221 [1] PIN  
15. 8T-9398 [2] BOLT (3/4-10X1.75-IN)  
16. 8C-4436 [4] BOLT (1/2-13X1.375-IN)  
17. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 4T-0231 [4] RETAINER  
19. 8E-9709 [1] C-FRAME AS  
20. 8S-6004 [1] BOSS  
21. 4T-1326 B [2] BRACKET (89MM DIA HOLES)  
  9W-6111 B [2] BRACKET (82MM DIA HOLES)  
22. 8P-9770 [1] PLATE  
23. 8E-9710 [2] TOWER AS  
24. 8J-8489 [6] BOSS  
25. 9P-7849 [6] BOSS  
26. 9W-5375 [2] BAR  
27. 3G-8887 [1] COLLAR  
28. 8E-6220 [1] PIN AS  
29. 6Y-6217 [1] TOWER AS  
30. 6D-0217 [2] BUSHING  
31. 6Y-6218 [1] TOWER AS  
32. 6Y-6236 [2] BUSHING  
33. 6Y-6234 [2] BEARING  
34. 6Y-4388 [1] BEARING-THRUST  
35. 6Y-4389 [1] SPACER (78X87X66.5-MM THK)  
    J-BEARINGS MUST BE PRESSED INTO THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF C-FRAME
  B   USE AS REQUIRED
 

#SEBP20240303
 

8E-9576: C-FRAME GP-POWER ANGLING

8E-9576 C-FRAME GP-POWER ANGLING
S/N 7AH1-UP
PART OF 8E-9493 BULLDOZER AR-PWR ANGLE & TILT, 8E-9492 BULLDOZER AR-UNIVERSAL
AN ATTACHMENT
i00612657 SEBP2024
8E9576 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D5H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2365 [2] RETAINER  
2. 7X-0379 [4] BOLT (7/8-9X1.5-IN)  
3. 6Y-4027 C [2] PIN  
4. 3G-8891 [4] SPACER (45X50X18-MM THK)  
5. 3G-8900 [4] PIN  
6. 4J-0805 B [14] WASHER (1.781X2.5X0.12-IN THK)  
7. 9S-1336 B [8] WASHER  
8. 105-3015 C [2] BUSHING  
    (BEARINGS MUST BE PRESSED INTO THE TRACTOR MAIN FRAME PRIOR TO INSTALLATION OF THE C-FRAME)
9. 6Y-6775 [1] PIN  
10. 6Y-6770 [2] SPACER (64X71X23.5-MM THK)  
11. 6Y-6773 [1] SPACER (64X71X55-MM THK)  
12. 6Y-6581 [1] RETAINER  
13. 7K-6058 [1] BOLT-12 POINT HEAD (1/2-13X2.5-IN)  
14. 8E-6221 [1] PIN  
15. 8T-9398 [2] BOLT (3/4-10X1.75-IN)  
16. 8C-4436 [4] BOLT (1/2-13X1.375-IN)  
17. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 4T-0231 [4] RETAINER  
19. 3B-8489 C [2] FITTING-GREASE (1/8-27 PTF)  
20. 3E-6757 C [4] SEAL-LIP TYPE  
21. 8E-9709 [1] C-FRAME AS  
22. 8S-6004 [1] BOSS  
23. 4T-1326 B [2] BRACKET (89MM DIA HOLES)  
  9W-6111 B [2] BRACKET (82MM DIA HOLES)  
24. 8P-9770 [1] PLATE  
25. 8E-9710 [2] TOWER AS  
26. 8J-8489 [6] BOSS  
27. 9P-7849 [6] BOSS  
28. 9W-5375 [2] BAR  
29. 3G-8887 [1] COLLAR  
30. 8E-6220 [1] PIN AS  
31. 6Y-6217 [1] TOWER AS  
32. 6D-0217 [2] BUSHING  
33. 6Y-6218 [1] TOWER AS  
34. 6Y-6236 [2] BUSHING  
35. 6Y-6234 [2] BEARING  
36. 6Y-4388 [1] BEARING-THRUST  
37. 6Y-4389 [1] SPACER (78X87X66.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20240304
 

3W-3477: LINKAGE GP-IMPLEMENT

3W-3477 LINKAGE GP-IMPLEMENT
S/N 8RJ1-UP
WINCH
PART OF 7T-9867 INSTALLATION AR-WINCH
AN ATTACHMENT
i00365604 SEBP2024
3W3477 LINKAGE GP-IMPLEMENT Parts scheme 3W3477 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D5H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-5977 [1] GUARD  
2. 4L-9337 [3] BOLT (3/8-16X1.5-IN)  
  5P-1075 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
3. 8T-1173 [2] SEAL-LIP TYPE  
4. 1B-0676 [8] PIN  
  3B-4615 [8] PIN-COTTER  
5. 4K-6287 [1] LEVER  
6. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
7. 7V-0989 [1] SPACER  
8. 8T-1177 [2] BEARING-ROLLER  
9. 3W-3349 [1] BRACKET  
10. 3W-3768 [1] SHAFT  
  1B-8706 [2] KEY-WOODRUFF  
11. 5G-1340 [2] SPACER  
12. 4L-6454 [4] BOLT (3/8-16X1-IN)  
13. 8T-4896 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 3W-2671 [1] COVER  
15. 9B-7237 [5] BOLT (3/8-16X1.25-IN)  
16. 2K-4973 [3] LOCKNUT (3/8-16-THD)  
17. 3W-3752 [1] LEVER  
18. 3W-1482 [1] SHAFT AS  
19. 3W-3346 [1] ROD  
20. 4D-4064 [2] ROD END (3/8-24-THD)  
21. 3S-2713 [8] NUT-FULL (3/8-24-THD)  
22. 2K-0400 [3] END-YOKE ROD  
23. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
  5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
24. 3W-3343 [1] BRACKET  
25. 3W-4589 [1] SHAFT  
26. 8T-0798 [1] BEARING-ROLLER  
27. 8T-0741 [1] SEAL-LIP TYPE  
28. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
29. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
30. 3W-3347 [1] ROD  
31. 5J-5315 [1] ROD END  
32. 1M-1341 [3] END-YOKE ROD  
33. 3W-3345 [1] ROD  
34. 5J-6131 [1] ROD-CONTROL  
35. 5S-7382 [4] BOLT (3/8-16X1.375-IN)  
36. 4K-7993 [1] ROD  
37. 3W-7525 [1] ROD  
38. 6V-8183 [3] NUT-FULL (3/8-24-THD)  
39. 1F-5403 [2] ROD END  
40. 3W-3341 [1] LEVER  
41. 1A-9579 [1] BOLT (5/16-18X1.5-IN)  
42. 1B-8704 [2] KEY-WOODRUFF  
43. 3W-3342 [1] LEVER  
44. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
45. 3W-3340 [1] LEVER  
46. 5S-7382 [1] BOLT (3/8-16X1.375-IN)  
47. 2P-3980 [1] LEVER  
48. 3W-3336 [1] LEVER  
49. 1B-0676 [1] PIN  
  3B-4615 [1] PIN-COTTER  
50. 7M-8459 [1] LOCKNUT  
51. 7X-0591 [4] WASHER-HARD (17X29X3-MM THK)  
52. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
53. 3W-3757 [1] BRACKET  
54. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
55. 4L-7551 [1] ROD-CONTROL  
56. 4D-4064 [1] ROD END (3/8-24-THD)  
57. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
58. 3K-4290 [1] BALL JOINT AS  
59. 8T-2637 [1] PIN-SPRING  
60. 8T-0741 [2] SEAL-LIP TYPE  
61. 8T-0798 [2] BEARING-ROLLER  
62. 3W-3761 [1] BRACKET  
63. 3W-3756 [1] LEVER  
64. 3W-3771 [1] LEVER  
65. 3W-3767 [1] SHAFT  
66. 1B-8706 [4] KEY-WOODRUFF  
67. 3W-3768 [1] SHAFT  
68. 3W-3772 [1] LEVER  
69. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
70. 8T-1177 [6] BEARING-ROLLER  
71. 8T-1173 [6] SEAL-LIP TYPE  
72. 8T-4994 [7] WASHER-HARD (20X36.5X3.5-MM THK)  
73. 1D-5874 [1] SPACER (0.766X1.25X1.125-IN THK)  
74. 6T-7162 [1] SEAL-DOMED  
75. 6T-7163 [1] SEAL-DOMED  
76. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
77. 1M-4533 [1] LEVER  
78. 8E-4149 [1] CUSHION AS (RH)  
79. 8E-4150 [1] SUPPORT  
 

#SEBP20240305
 

3G-8919: PIN GP

3G-8919 PIN GP
S/N 7AH1-UP; 7ZH1-UP; 8RJ1-UP
DOZER
PART OF 3A-8745 BULLDOZER AR-ANGLING, 8E-9492 BULLDOZER AR-UNIVERSAL
AN ATTACHMENT
i00365671 SEBP2024
3G8919 PIN GP Parts scheme
  For full view, you need register

Parts for your D5H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-8932 [2] PIN  
2. 4T-0231 [2] RETAINER  
3. 8C-4436 [2] BOLT (1/2-13X1.375-IN)  
4. 4J-0805 B [6] WASHER (1.781X2.5X0.12-IN THK)  
5. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  B   USE AS REQUIRED
 

#SEBP20240306
 

115-4472: PUSH ARM GP

115-4472 PUSH ARM GP
S/N 8RJ1-UP; 2SP1-UP
PART OF 107-5598, 122-6593 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i00492897 SEBP2024
1154472 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D5H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-0255 [2] PIN  
2. 4T-1520 [1] CAGE AS  
2A. 6J-5383 [1] BEARING  
3. 8E-5701 B [52] SHIM (0.8-MM THK)  
4. 8E-5703 B [78] SHIM (0.8-MM THK)  
5. 8J-2880 [3] CAP-BEARING  
6. 115-3523 Y [1] CYLINDER GP-TILT  
7. 115-4473 [1] ARM AS (RH)  
7A. 3G-6313 [1] BEARING  
7B. 1U-2533 [1] BAR  
7C. 4T-0732 [1] BRACKET  
7D. 179-6153 [1] BEARING  
7E. 8P-9770 [1] PLATE  
8. 115-4474 [1] ARM AS (LH)  
8A. 3G-6313 [1] BEARING  
8B. 1U-2533 [1] BAR  
8C. 4T-0780 [1] TRUNNION  
8D. 179-6153 [1] BEARING  
8E. 8P-9770 [1] PLATE  
8F. 115-4522 [1] BRACKET  
9. 124-9672 [1] BRACE AS-TILT  
9A. 8E-2887 [1] YOKE  
10. 160-6306 [2] CAP-BEARING  
11. 3B-4626 [2] PIN-COTTER  
12. 3F-6185 [2] PIN  
13. 6V-9167 M [8] BOLT (M20X2.5X140-MM)  
14. 7X-2566 M [6] BOLT (M20X2.5X110-MM)  
15. 8C-8478 M [4] BOLT (M20X2.5X140-MM)  
16. 8T-4123 [6] WASHER (3.62X5.75X0.375-MM THK)  
17. 8T-4131 M [22] NUT (M20X2.5-THD)  
18. 8T-5439 [6] WASHER-HARD (21.5X45X6-MM THK)  
19. 8T-6381 M [4] BOLT (M20X2.5X120-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20240307
 

9U-8225: PUSH ARM GP

9U-8225 PUSH ARM GP
S/N 7BH1-99999
PART OF 6I-9268, 8E-9886 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i00440933 SEBP2024
9U8225 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D5H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0373 [4] BOLT (3/4-10X5.5-IN)  
2. 6V-8182 [10] NUT (3/4-10-THD)  
3. 8J-2880 [3] CAP-BEARING  
4. 8E-5701 B [52] SHIM (0.8-MM THK)  
5. 4T-6702 [1] SCREW-ADJUSTMENT  
6. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
7. 1U-0105 [1] BRACE AS  
  3F-4854 [1] KNOB  
8. 6F-3908 [1] HANDLE  
  8J-4866 [1] LUG  
9. 4J-3583 [1] SCREW-ADJUSTMENT  
10. 9U-8227 [1] PUSH ARM AS (LH)  
  1U-2533 [1] BAR  
  8P-9770 [1] PLATE  
  9W-9165 [1] BEARING  
  1K-4455 [16] BAR  
11. 3G-6313 [1] BEARING  
12. 4T-0780 [1] TRUNNION  
13. 9W-2579 [1] PLATE  
14. 3B-4627 [2] PIN-COTTER  
  4F-0255 [2] PIN (2.875IN LG)  
  3F-6185 [2] PIN (5.437IN LG)  
15. 7X-0372 [6] BOLT (3/4-10X4.25-IN)  
  8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
16. 4T-1520 [1] CAGE AS  
17. 6J-5383 [1] BEARING  
18. 7X-0375 [8] BOLT (3/4-10X5-IN)  
19. 8T-8925 [4] BOLT (3/4-10X4.75-IN)  
20. 4F-2710 [12] NUT (3/4-10-THD)  
21. 6F-3183 [2] CAP-BEARING  
22. 9U-8226 [1] PUSH ARM AS (RH)  
  8P-9770 [1] PLATE  
  1K-4455 [16] BAR  
23. 9W-9165 [1] BEARING  
24. 9W-2579 [2] PLATE  
25. 3G-6313 [1] BEARING  
26. 1U-2533 [1] BAR  
27. 4T-0732 [1] BRACKET  
28. 8E-5703 B [78] SHIM (0.8-MM THK)  
29. 7X-0582 [6] WASHER-HARD (20X44.5X6-MM THK)  
30. 1U-3991 Y [1] CYLINDER GP-TILT  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP20240308
 

8E-2796: SINGLETREE GP

8E-2796 SINGLETREE GP
S/N 7AH1-UP; 7ZH1-UP
PART OF 3A-8745 BULLDOZER AR-ANGLING, 8E-9493 BULLDOZER AR-PWR ANGLE & TILT, 8E-9492 BULLDOZER AR-UNIVERSAL
AN ATTACHMENT
i00412935 SEBP2024
8E2796 SINGLETREE GP Parts scheme
  For full view, you need register

Parts for your D5H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-2795 [1] SINGLETREE AS  
2. 6Y-6134 [2] BEARING  
3. 6Y-5767 [2] PLATE  
4. 6Y-6769 [1] SPACER  
5. 3G-8900 [2] PIN  
6. 4J-0805 [12] WASHER (1.781X2.5X0.12-IN THK)  
7. 6Y-6126 [2] PLATE-WEAR (WEAR)  
  6Y-6127 [2] PLATE-WEAR (WEAR)  
8. 8T-6757 [1] PLUG-PIPE  
9. 3B-8485 [2] ELBOW  
10. 7B-3235 [2] BOLT (1/2-13X1.375-IN)  
11. 4T-0231 [2] RETAINER  
 

#SEBP20240309
 

142-1229: TRUNNION GP-BULLDOZER

142-1229 TRUNNION GP-BULLDOZER
S/N 2SP1-UP
PART OF 122-6593 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i00650777 SEBP2024
1421229 TRUNNION GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D5H XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1979 [2] SEAL-O-RING  
2. 9U-8909 [2] TRUNNION AS  
    (EACH INCLUDES)
  9J-2759 [1] TRUNNION  
3. 7X-2475 M [20] BOLT (M16X2X130-MM)  
4. 8T-4122 [20] WASHER-HARD (17X32X3.5-MM THK)  
5. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
6. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 143-3148 [2] COVER  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D5H XL :

6I-9268 BULLDOZER AR-SEMI-UNIVERSAL
122-6593 BULLDOZER AR-SEMI-UNIVERSAL
107-5598 BULLDOZER AR-SEMI-UNIVERSAL
8E-9493 BULLDOZER AR-PWR ANGLE & TILT
3A-8745 BULLDOZER AR-ANGLING
VALVE GP-SELECTOR & PRESS CONT
3T-9927 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SELECTOR & PRESS CONT
3T-9924 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-RELIEF
6E-0772 VALVE GP-RELIEF
8E-9492 BULLDOZER AR-UNIVERSAL
C-FRAME GP-POWER ANGLING
8E-9576 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
8E-9576 C-FRAME GP-POWER ANGLING
LINKAGE GP-IMPLEMENT
3W-3477 LINKAGE GP-IMPLEMENT
PIN GP
3G-8919 PIN GP
PUSH ARM GP
115-4472 PUSH ARM GP
PUSH ARM GP
9U-8225 PUSH ARM GP
SINGLETREE GP
8E-2796 SINGLETREE GP

Truck sale:

CAT D5H XL
 
CAT D5H XL

Old Forge Power Equipment Inc.
1996 CAT D5H XL
USD $38,500 
1996 CAT D5H XL

Milam's Equipment
Sutherlin, Virginia
 
 
CAT D5H XL

HURRICANE EQ
Culloden, West Virginia 25510
1993 CAT D5H XL
 
1993 CAT D5H XL

United Exports
Old Forge, Pennsylvania
1996 CAT D5H XL
Call 
1996 CAT D5H XL

A & B / H.E.S. Equipment
Holland, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.