AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G4615 CYLINDER GP-MASTER (CH N04) 152.4 MM (6 IN) BORE X 1143 MM (45 IN) STROKE PART OF 4V5550 SHOVEL AR-FRONT AN ATTACHMENT 245D


HYDRAULIC SYSTEM
CYLINDER GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
HYDRAULIC SYSTEM
CYLINDER GP
VALVE GP
CYLINDER GP
LINES GP-REAR

EXCAVATOR 245D EXCAVATOR 7ZJ
 245D EXCAVATOR 7ZJ00001-UP (MACHINE) POWERED BY 3406 ENGINE SEBP2027 245D 7ZJ   (1992)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BUCKET
1U-1646 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
9J-9398 CYLINDER GP-BUCKET
CYLINDER GP-MASTER
3G-4615 CYLINDER GP-MASTER
CYLINDER GP-BOOM
9J-5379 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
6E-5893 CYLINDER GP-BUCKET
RESTRAINT GP-CYLINDER
3V-5291 RESTRAINT GP-CYLINDER
 

#SEBP20270350
 

3G-4615: CYLINDER GP-MASTER

3G4615 CYLINDER GP-MASTER (CH N04)
152.4 MM (6 IN) BORE X 1143 MM (45 IN) STROKE
PART OF 4V5550 SHOVEL AR-FRONT
AN ATTACHMENT
c520109 SEBP2027
3G4615 CYLINDER GP-MASTER Parts scheme
  For full view, you need register

Parts for your 245D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7408 [2] PLUG-PIPE  
2. 4T-1684 [2] BEARING  
3. 8J-5962 [4] SEAL AS  
4. 8J-1746 [1] RING-WEAR  
5. 4T-4144 C [1] SEAL AS  
6. 9X-3581 [1] SEAL AS  
7. 8J-4524 [1] SEAL-U`CUP  
8. 9X-3582 [1] SEAL-LIP TYPE  
9. 3G-4613 R [1] ROD AS  
10. 9T-4169 C [1] HEAD  
11. 6J-3913 [10] BOLT-12 POINT HEAD  
12. 6D-9157 [1] SEAL-O-RING  
  8J-1717 [1] RING-BACK-UP  
13. 3G-4612 R [1] CYLINDER AS  
14. 8J-6881 [1] PISTON  
15. 4J-6888 [1] NUT-SELF LOCKING  
16. 8T-3331 C [1] RING-WEAR  
17. 8T-8377 [1] SEAL-HEAD  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP20270351
 

9J-5379: CYLINDER GP-BOOM

9J5379 CYLINDER GP-BOOM (CHG N07)-2 REQUIRED
177.8 MM (7 IN) BORE X 1079.5 MM (42.5 IN) STROKE
PART OF 4V5550 SHOVEL AR-FRONT
AN ATTACHMENT
c511263 SEBP2027
9J5379 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 245D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7408 [3] PLUG-PIPE  
2. 9J-7235 R [1] CYLINDER AS  
3. 9X-7273 [1] RING-BACK-UP  
4. 8J-1665 [1] SEAL-O-RING  
5. 9X-7261 [1] SEAL AS  
6. 6J-1475 [1] SEAL  
7. 9X-7262 [1] SEAL-LIP TYPE  
8. 9J-7236 R [1] ROD AS  
9. 2A-1420 [8] BOLT  
  5F-6562 [8] WASHER-HARD  
10. 9T-3963 C [1] HEAD  
11. 8T-1789 [1] SEAL AS  
12. 3G-3521 [2] BEARING  
13. 8J-1664 [1] PISTON  
14. 8J-1662 [1] RING-WEAR  
15. 7J-9250 [1] NUT-SELF LOCKING  
16. 9J-2116 [4] SEAL AS  
17. 8T-7850 C [1] RING-WEAR  
18. 8T-8380 [1] SEAL-HEAD  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP20270352
 

6E-5893: CYLINDER GP-BUCKET

6E5893 CYLINDER GP-BUCKET (CHG N00)
197 MM (8 IN) BORE X 1651 MM (65 IN) STROKE
PART OF 9V3333 LINKAGE AR-HOE BUCKET-MASS EXCAVATION
AN ATTACHMENT
c528670 SEBP2027
6E5893 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 245D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2116 [2] SEAL AS  
2. 3G-3521 [1] BEARING  
3. 9X-6017 [1] NUT-SELF LOCKING  
4. 9J-3624 [1] RING-WEAR  
5. 8T-1792 [1] SEAL AS  
6. 6E-5468 [1] PISTON  
7. 4T-5873 [1] STOP  
8. 6E-4569 R [1] CYLINDER AS  
9. 5K-1787 [1] SEAL-O-RING  
10. 8J-0548 [1] RING-BACK-UP  
11. 6E-2020 [1] HEAD  
12. 1D-4642 [8] BOLT  
  5P-8250 [8] WASHER  
13. 8J-8719 [2] SEAL AS  
14. 8J-4382 [1] BEARING AS  
15. 6E-5469 R [1] ROD AS  
16. 9X-7268 [1] SEAL-LIP TYPE  
17. 4T-5699 [1] SEAL-U-CUP  
18. 9X-7267 [1] SEAL AS  
19. 4T-5718 [1] RING-WEAR  
20. 8C-4892 [1] SEAL-HEAD  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP20270353
 

3V-5291: RESTRAINT GP-CYLINDER

3V5291 RESTRAINT GP-CYLINDER
PART OF 9C6824 BOOM AR-HOE
AN ATTACHMENT
c492358 SEBP2027
3V5291 RESTRAINT GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 245D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1730 [1] BAR  
2. 2V-6225 [1] ROPE AS  
3. 6V-8188 [2] NUT  
  4B-4280 [2] WASHER  
4. 5C-6565 [2] BOLT  
  8T-4223 [2] WASHER  
 

#SEBP20270354
 

9V-4024: RESTRAINT GP-CYLINDER

9V4024 RESTRAINT GP-CYLINDER
PART OF 9V4580 BOOM AR-HOE
AN ATTACHMENT
c496551 SEBP2027
9V4024 RESTRAINT GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 245D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9V-2222 [1] BRACKET AS  
2. 2V-6225 [1] ROPE AS  
3. 6V-8188 [2] NUT (1/2-13 THD)  
4. 8T-4223 [6] WASHER (3MM THK)  
5. 5P-2424 [4] BOLT (1/2-13X2.25IN)  
 

#SEBP20270355
 

2V-1043: CONTROL GP-HYDRAULIC

2V1043 CONTROL GP-HYDRAULIC
9J7752-PAGE 300
PART OF 2V1171 BUCKET AR-SHOVEL
AN ATTACHMENT
c492362 SEBP2027
2V1043 CONTROL GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 245D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-1029 I [1] HOSE AS  
2. 6K-9194 [1] ELBOW  
3. 061-9258 [1] TEE  
4. 2P-1278 [4] UNION-BULKHEAD  
  2P-1279 [4] LOCKNUT  
5. 8K-1684 I [1] HOSE AS  
6. 6S-5693 [1] TEE  
  030-8144 [1] REDUCER-FLARED  
  1P-1441 [1] NUT-FLARED  
7. 2V-1096 I [2] HOSE AS  
8. 7K-1181 [6] STRAP-CABLE  
9. 2V-1067 [2] PLATE  
10. 7S-9372 CB [4] BOLT 28.58MM(1.125IN)LG  
  8T-4122 CB [4] WASHER  
11. 2V-0152 I [2] HOSE AS  
12. 2R-6806 [1] CONNECTOR  
13. 9J-7752 Y [1] VALVE GP  
14. 7X-0332 [4] BOLT  
15. 8T-4223 C [20] WASHER  
16. 030-7947 [1] ELBOW  
17. 1P-3707 [1] SEAL-RECTANGULAR  
18. 5P-2424 [4] BOLT  
19. 6K-6164 [1] CLIP (SMALL)  
  6K-6167 [1] CLIP (LARGE)  
20. 5P-2228 [1] BOLT  
21. 2V-8443 [1] TUBE AS  
22. 2V-1066 [1] ANGLE  
23. 5P-2566 C [8] BOLT  
24. 6V-8188 C [9] NUT  
25. 5P-1076 [4] WASHER-HARD  
26. 1P-4582 [6] FLANGE-HALF  
27. 4J-0527 C [3] SEAL-O-RING  
28. 7D-5962 [3] BOLT 8.89CM(3.5IN)LG  
  8T-8919 [1] BOLT  
29. 2V-1001 I [1] HOSE AS  
30. 2V-0997 [1] PLATE  
31. 7X-0326 C [2] BOLT  
32. 8T-9389 C [4] BOLT  
33. 2V-8728 I [1] HOSE AS  
34. 7X-0346 CB [2] BOLT  
35. 4V-9363 [1] BAR  
36. 1P-4579 [2] FLANGE-HALF  
  4J-0524 C [1] SEAL  
37. 006-3801 [8] WASHER  
38. 3J-1907 [2] SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20270356
 

7V-3925: CYLINDER & SEAL GP

7V3925 CYLINDER & SEAL GP
PART OF 7V1120 BUCKET-SHOVEL
AN ATTACHMENT
SEBP20270356 SEBP2027
  For full view, you need register

Parts for your 245D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  1U-1659 Y [1] CYLINDER GP-BOTTOM DUMP  
   
   
  7K-9216 [4] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20270357
 

9J-7752: VALVE GP

9J7752 VALVE GP-BYPASS-QUICK DUMP
PART OF 2V1043 CONTROL-HYDRAULIC
AN ATTACHMENT
c477722 SEBP2027
9J7752 VALVE GP Parts scheme
  For full view, you need register

Parts for your 245D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-4225 [4] BOLT  
2. 3B-4506 [8] LOCKWASHER  
3. 9J-7749 [1] HOUSING  
4. 4J-0523 [2] SEAL-O-RING  
5. 0S-1571 [4] BOLT  
6. 9J-7791 [1] FLANGE  
7. 9J-7751 [1] VALVE GP  
8. 1P-3705 [1] SEAL  
9. 5B-2733 [1] SPRING  
 

#SEBP20270358
 

1U-1659: CYLINDER GP-BOTTOM DUMP

1U1659 CYLINDER GP-BOTTOM DUMP (CHG 01)
197 MM (7.7 IN) BORE X 292 MM (11.4 IN) STROKE
PART OF 7V3925 CYLINDER & SEAL
AN ATTACHMENT
c516451 SEBP2027
1U1659 CYLINDER GP-BOTTOM DUMP Parts scheme
  For full view, you need register

Parts for your 245D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-2632 [1] CYLINDER AS  
  7X-0379 F [1] BOLT  
2. 0S-1620 [2] BOLT  
  7J-7367 [1] COVER  
  7J-7366 [1] GASKET  
3. 2B-7408 [1] PLUG-PIPE  
4. 2J-7686 [1] NUT-SELF LOCKING  
5. 9J-5037 [1] RING-WEAR  
6. 5J-7016 [1] SEAL AS  
  5J-7014 [1] SEAL  
  5J-7015 [1] RING-EXPANDER  
7. 9J-5036 [1] PISTON  
8. 8C-9127 [1] SEAL AS  
9. 5J-8350 [1] SEAL  
10. 8C-5219 [1] SEAL-LIP TYPE  
11. 9J-8039 R [1] ROD AS  
12. 3G-2867 [1] BEARING-SLEEVE  
13. 2B-7408 [1] PLUG-PIPE  
14. 1D-4631 [2] BOLT  
15. 5P-8249 [8] WASHER  
16. 1D-4626 [6] BOLT  
17. 3J-0634 [1] SEAL-O-RING  
18. 3J-9742 [1] RING-BACK-UP  
19. 8C-5245 C [1] RING-WEAR  
20. 9T-6864 C [1] HEAD  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP20270359
 

9U-2654: LINES GP-REAR ATTACHMENT

9U2654 LINES GP-REAR
PART OF 4E8907 HANDLING AR-COUNTERWEIGHT
AN ATTACHMENT
c527168 SEBP2027
9U2654 LINES GP-REAR ATTACHMENT Parts scheme
  For full view, you need register

Parts for your 245D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-0505 [2] CONNECTOR (FLARED)  
2. 3K-0360 [2] SEAL-O-RING  
3. 2V-0511 I [1] HOSE AS  
4. 5P-2242 [1] TEE-SWIVEL  
5. 3R-6789 [1] CAP-FLARED  
6. 2V-0508 I [1] HOSE AS  
7. 030-7960 [1] TEE-FLARED  
8. 7M-8485 [3] SEAL-O-RING  
9. 2V-0509 [1] HOSE AS  
10. 7K-1181 [2] STRAP-CABLE  
11. 031-5744 [2] ELBOW  
12. 4V-9481 [1] TUBE AS  
13. 4V-5593 I [1] HOSE AS  
14. 8T-8920 [2] BOLT  
15. 8K-2377 [2] ELBOW-FLARED  
  4K-1388 [2] SEAL-O-RING  
16. 1P-4577 [2] FLANGE-HALF  
17. 4J-0520 [1] SEAL  
18. 3K-9957 [2] CLAMP  
19. 5C-6565 [1] BOLT  
20. 6H-4923 [1] CLAMP-PIPE  
  5P-8167 [1] BOLT  
  5P-1075 [1] WASHER-HARD  
21. 2V-0512 I [1] HOSE AS  
22. 4J-8996 [1] SEAL-O-RING  
23. 8T-4223 [6] WASHER  
24. 8T-8917 [3] BOLT  
25. 6V-8188 [3] NUT  
  5P-1076 [3] WASHER-HARD  
26. 2V-0489 [1] ANGLE AS  
27. 7X-0325 [3] BOLT  
28. 030-7951 [1] ELBOW-FLARED  
29. 030-8196 [1] CONNECTOR  
30. 5S-7382 [4] BOLT  
31. 8T-4896 [4] WASHER-HARD  
32. 2M-9780 [3] SEAL-O-RING  
33. 1P-0043 [2] NUT-FLARED  
34. 4B-4280 [3] WASHER  
35. 4M-5281 [4] BOLT  
36. 8T-4205 [4] WASHER-HARD  
37. 005-4173 [2] ELBOW  
38. 9U-2655 [2] HOSE AS  
39. 067-6684 [2] REDUCER-FLARED  
40. 030-8307 [1] CONNECTOR-FLARED  
  I   SEE HOSE FABRICATION GUIDE
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 245D :

VALVE GP-CONTROL
8J-2419 VALVE GP-CONTROL
VALVE GP-CONTROL
9J-3610 VALVE GP-CONTROL
VALVE GP-CONTROL
9J-4119 VALVE GP-CONTROL
VALVE GP-RELIEF
9J-4118 VALVE GP-RELIEF
VALVE GP
6C-8007 VALVE GP
VALVE GP-RELIEF
9T-0122 VALVE GP-RELIEF
6C-8006 VALVE GP-CONTROL
VALVE GP-CONTROL
6C-8006 VALVE GP-CONTROL
CYLINDER GP-BOOM
9J-5379 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
6E-5893 CYLINDER GP-BUCKET
RESTRAINT GP-CYLINDER
3V-5291 RESTRAINT GP-CYLINDER
RESTRAINT GP-CYLINDER
9V-4024 RESTRAINT GP-CYLINDER
CONTROL GP-HYDRAULIC
2V-1043 CONTROL GP-HYDRAULIC
7V-3925 CYLINDER & SEAL GP
VALVE GP
9J-7752 VALVE GP
CYLINDER GP-BOTTOM DUMP
1U-1659 CYLINDER GP-BOTTOM DUMP

Truck sale:

1994 CAT 245D
Call 
1994 CAT 245D

B.E.M SA
1993 CAT 245D
Call 
1993 CAT 245D

National Equipment Brokers
Rochester, New York
1993 CAT 245D
USD $28,900 
1993 CAT 245D

National Equipment Brokers
Rochester, New York
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.