AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N-9536 FASTENER GP-CYLINDER HEAD ADDITIONAL CYLINDER HEAD FASTENER BOLT AND WASHER CAN BE FOUND IN 7C-7013. 3306B


BASIC ENGINE
CYLINDER HEAD GP
HOUSING GP-FRONT
FLYWHEEL GP
GEAR GP
HOUSING GP-FLYWHEEL
GEAR GP
PARTS GP-MISCELLANEOUS
LIFTING GP-ENGINE

GEN SET ENGINE 3306B GEN SET ENGINE 8JJ
 3306B(XQ200) Rental Generator Set 8JJ00001-UP SEBP2031 3306B 8JJ   (1992)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
7W-0362 CYLINDER HEAD GP
CYLINDER HEAD GP
8N-0246 CYLINDER HEAD GP
CYLINDER HEAD GP
8N-6796 CYLINDER HEAD GP
FASTENER GP-CYLINDER HEAD
7N-9536 FASTENER GP-CYLINDER HEAD
 

#SEBP20310020
 

7N-9536: FASTENER GP-CYLINDER HEAD

7N-9536 FASTENER GP-CYLINDER HEAD
ADDITIONAL CYLINDER HEAD FASTENER BOLT AND WASHER CAN BE FOUND IN 7C-7013.
i00122395 SEBP2031
7N9536 FASTENER GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-9603 [6] BOLT (3/8-16X5-IN)  
2. 1B-7709 [5] BOLT (5/8-11X8-IN)  
3. 1D-4595 [20] BOLT (5/8-11X6-IN)  
4. 2S-0736 [25] WASHER-HARD (17X27X3.5-MM THK)  
5. 5B-9603 B [1] BOLT (3/8-16X5-IN)  
  B   USE AS REQUIRED
 

#SEBP20310021
 

1W-3802: FASTENER GP-FRONT HOUSING

1W-3802 FASTENER GP-FRONT HOUSING
i00121981 SEBP2031
1W3802 FASTENER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8801 [7] NUT (3/8-16-THD)  
2. 1C-2251 [2] BOLT (3/8-16X1.87-IN)  
3. 0L-2070 [17] BOLT (3/8-16X2.25-IN)  
4. 3E-6914 [6] BOLT (3/8-16X0.87-IN)  
5. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP20310022
 

7N-3496: FLYWHEEL GP

7N-3496 FLYWHEEL GP
i00409167 SEBP2031
7N3496 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1600 [9] BOLT (5/8-18X2.5-IN)  
2. 7N-0749 [1] FLYWHEEL AS  
3. 7N-9146 [1] GEAR (156-TEETH)  
 

#SEBP20310023
 

111-8001: GEAR GP-FRONT

111-8001 GEAR GP-FRONT -TIMING
S/N 8JJ243-1030
i00123176 SEBP2031
1118001 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8636 [1] GEAR-DRIVE (66-TEETH)  
2. 7N-2994 [1] WASHER (49.3X16.25X12.3-MM THK)  
3. 8N-4960 [1] PLATE-THRUST  
4. 0S-1618 [2] BOLT (5/16-18X1-IN)  
5. 170-7502 [1] SHAFT-DRIVE IDLER  
6. 0S-1748 [4] BOLT (3/8-24X2-IN)  
7. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 196-0224 [1] GEAR AS-IDLER (50-TEETH)  
  196-9988 [1] BUSHING  
9. 4P-7826 [1] GEAR-CAMSHAFT (66-TEETH)  
10. 1A-1135 [1] BOLT (5/8-11X2-IN)  
11. 0S-1594 [2] BOLT (3/8-16X1-IN)  
12. 196-0028 [1] GEAR AS-IDLER (47-TEETH)  
  195-0302 [1] BUSHING  
13. 5B-9079 [1] NUT-JAM (3/8-24-THD)  
 

#SEBP20310024
 

1W-5634: GEAR GP-FRONT

1W-5634 GEAR GP-FRONT -TIMING
S/N 8JJ1-103
i00144991 SEBP2031
1W5634 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1135 C [1] BOLT (5/8-11X2-IN)  
  7N-2994 [1] WASHER (49.3X16.25X12.3-MM THK)  
2. 7W-0508 C [1] GEAR-FUEL PUMP DRIVE (80-TEETH)  
3. 0S-1594 [2] BOLT (3/8-16X1-IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 7N-4791 [1] GEAR AS-FUEL PUMP IDLER (57-TEETH)  
  5S-7630 [1] BUSHING  
5. 5B-9079 [1] NUT-JAM (3/8-24-THD)  
6. 1W-4402 [1] GEAR-CAMSHAFT (80-TEETH)  
7. 8N-4959 [1] SHAFT-DRIVE IDLER  
8. 8N-4960 [1] PLATE-THRUST  
9. 0S-1618 [2] BOLT (5/16-18X1-IN)  
10. 7N-4722 [1] GEAR AS-IDLER (60-TEETH)  
  2P-1168 [1] BUSHING  
11. 0S-1748 [4] BOLT (3/8-24X2-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20310025
 

1W-5634: GEAR GP-FRONT

1W-5634 GEAR GP-FRONT -TIMING
S/N 8JJ104-UP
i00121986 SEBP2031
1W5634 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1135 [1] BOLT (5/8-11X2-IN)  
  7N-2994 [1] WASHER (49.3X16.25X12.3-MM THK)  
2. 7W-0508 [1] GEAR-FUEL PUMP DRIVE (80-TEETH)  
3. 0S-1594 [2] BOLT (3/8-16X1-IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 196-0029 C [1] GEAR AS-IDLER (57-TEETH)  
  195-0302 [1] BUSHING  
5. 5B-9079 [1] NUT-JAM (3/8-24-THD)  
6. 1W-4402 [1] GEAR-CAMSHAFT (80-TEETH)  
7. 170-7502 C [1] SHAFT-DRIVE IDLER  
8. 8N-4960 [1] PLATE-THRUST  
9. 0S-1618 [2] BOLT (5/16-18X1-IN)  
10. 196-0223 [1] GEAR AS-IDLER (60-TEETH)  
  196-9988 [1] BUSHING  
11. 0S-1748 [4] BOLT (3/8-24X2-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20310026
 

9Y-4624: HOUSING GP-FLYWHEEL

9Y-4624 HOUSING GP-FLYWHEEL
i00442369 SEBP2031
9Y4624 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-8846 B SEALANT-GASKET  
2. 7X-7730 [2] PLUG-PIPE  
3. 9Y-4623 [1] HOUSING-FLYWHEEL  
4. 7X-7731 [1] PLUG-PIPE (3/4-14-THD)  
5. 1A-1460 [13] BOLT (1/2-13X2-IN)  
6. 8T-6765 [1] PLUG-PIPE (1/4-18-THD)  
7. 5F-0304 [2] PLUG  
8. 2A-1162 [2] GASKET  
9. 3B-0645 [1] PLUG-CUP  
  B   USE AS REQUIRED
 

#SEBP20310027
 

8N-0303: HOUSING GP-FRONT

8N-0303 HOUSING GP-FRONT
i00122460 SEBP2031
8N0303 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0923 [1] HOUSING AS-FRONT  
2. 9X-2485 [6] STUD  
3. 1W-7816 [1] PLATE AS  
  5M-6214 [1] PLUG (1/8-27 PTF)  
4. 6H-0192 [3] STUD  
5. 8N-0110 [1] GASKET-FRONT PLATE  
6. 1W-3900 [1] GASKET  
 

#SEBP20310028
 

196-9534: KIT-BASIC ENGINE REPAIR

196-9534 KIT-BASIC ENGINE REPAIR
FIELD INSTALLATION
i06137704 SEBP2031
  For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  232-3233 [7] BEARING-MAIN (STANDARD)  
  4P-7305 AB BEARING-MAIN (0.51-MM OS, 0.51-MM US)  
  4P-7306 AB BEARING-MAIN (0.51-MM OS, 0.76-MM US)  
  8N-8225 AB BEARING-MAIN (0.25-MM US)  
  8N-8226 AB BEARING-MAIN (0.51-MM US)  
  8N-8227 AB BEARING-MAIN (0.76-MM US)  
  8N-8228 AB BEARING-MAIN (0.51-MM OS)  
  8N-8229 AB BEARING-MAIN (0.25-MM US, 0.51-MM OS)  
  100-3652 [7] PLATE-THRUST  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP20310029
 

9Y-1318: LIFTING GP-ENGINE

9Y-1318 LIFTING GP-ENGINE
i00437931 SEBP2031
9Y1318 LIFTING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-2940 [1] PLATE-EYE  
2. 6V-1999 [2] BOLT (5/8-11X1.5-IN)  
3. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
4. 8N-3272 [1] PLATE-LIFTING EYE  
5. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 4B-3823 [4] BOLT (1/2-13X1.25-IN)  
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Competitive Report: Caterpillar Cylinder Heads vs. Ghinassi Cylinder Heads
1986/11/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads
1988/06/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Correction For Camshaft And Valve Seat Specifications
1992/07/01
New Valve Guide Available {1104}
1995/12/20
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New Specification For Reusability of the Intake Valve and the Exhaust Valve {1105}
2002/05/01
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
3306B-XQ200 Rental Generator Set Engine
Engine Valve Lash - Inspect/Adjust
3306B-XQ200 Rental Generator Set Engine
Special Instruction
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Valve Rocker Arms And Lifters
3304B & 3306B GENERATOR SET ENGINES
Valves
3304B & 3306B GENERATOR SET ENGINES
Cylinder Head
3304B & 3306B GENERATOR SET ENGINES
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Disassembly and Assembly
Rocker Shaft Assembly And Push Rods
3306B GENERATOR SET ENGINE
Cylinder Head
3306B GENERATOR SET ENGINE
Valve Lifters
3306B GENERATOR SET ENGINE
Valves
3306B GENERATOR SET ENGINE
Valve Guides
3306B GENERATOR SET ENGINE
Valve Seat Inserts
3306B GENERATOR SET ENGINE
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Later Pre-Chamber Cylinder Heads On Early 3304 Engines Without Drilled Rocker Stands Are Used {1100}
2012/10/11

Caterpillar Parts SIS Catalog 3306B :

DRIVE GP-FAN
3N-7210 DRIVE GP-FAN
DAMPER GP
3N-2885 DAMPER GP
CYLINDER HEAD GP
8N-6796 CYLINDER HEAD GP
CYLINDER HEAD GP
8N-0246 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-0362 CYLINDER HEAD GP
CYLINDER BLOCK GP
8N-5286 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7N-6550 CYLINDER BLOCK GP
CYLINDER BLOCK GP
1N-3576 CYLINDER BLOCK GP
FASTENER GP-FRONT HOUSING
1W-3802 FASTENER GP-FRONT HOUSING
FLYWHEEL GP
7N-3496 FLYWHEEL GP
GEAR GP-FRONT
111-8001 GEAR GP-FRONT
GEAR GP-FRONT
1W-5634 GEAR GP-FRONT
GEAR GP-FRONT
1W-5634 GEAR GP-FRONT
HOUSING GP-FLYWHEEL
9Y-4624 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
196-9534 KIT-BASIC ENGINE REPAIR

Truck sale:

Caterpillar 3306B
 
Caterpillar 3306B
- Stationary Generator Sets
THOMPSON MACHINERY COMMERCE CORPORATION
 
41,500 
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3306B, Stationary Generator Sets, Construction
33,500 
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
38.001 
Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
 
Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.