AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

320, 320L & 320N EXCAVATORS 3XK00001-00821 (MACHINE) WORK TOOLS Caterpillar SIS



EXCAVATOR 320-A L EXCAVATOR 3XK
 320, 320L & 320N EXCAVATORS 3XK00001-00821 (MACHINE) SEBP2034 320-A L 3XK   (1992)

Parts group 320-A L:

  For full view, you need register
WORK TOOLS
BUCKET GP
BUCKET AS
5I-3335 BUCKET AS
5I3335 BUCKET AS-(C-FAMILY)
EXCAVATION. 1470MM (57.9IN) WIDE, 1.2 CU.M (1.56 CU.YD) CAPACITY
AN ATTACHMENT
BUCKET AS
5I-3444 BUCKET AS
5I3444 BUCKET AS-(C-FAMILY)
EXCAVATION. 1370 MM (53.9 IN) WIDE, 1.1 CU.M 91.43 CU.YD) CAPACITY
AN ATTACHMENT
BUCKET AS
7Y-7465 BUCKET AS
7Y7465 BUCKET AS-(C-FAMILY)
TYPE 1 TRENCHING 1075 MM (42.3 IN) WIDE
AN ATTACHMENT
BUCKET AS
7Y-7465 BUCKET AS
7Y7465 BUCKET AS-(C-FAMILY)
TYPE 2 TRENCHING 1075 MM (42.3 IN) WIDE
AN ATTACHMENT
BUCKET AS
7Y-7466 BUCKET AS
7Y7466 BUCKET AS-(C-FAMILY)
TRENCHING 1075 MM (42.3 IN) WIDE
AN ATTACHMENT
BUCKET AS
7Y-7518 BUCKET AS
7Y7518 BUCKET AS (C-FAMILY)
AN ATTACHMENT
BUCKET AS
7Y-7720 BUCKET AS
7Y7720 BUCKET AS-(C-FAMILY)
UTILITY 1730 MM (68.0 IN) WIDE, 1.4 CU.M (1.83 CU.YD) CAPACITY
AN ATTACHMENT
BUCKET AS
7Y-7592 BUCKET AS
7Y7592 BUCKET AS-(C FAMILY)
MASS EXCAVATION 1440 MM (56.7 IN) WIDE, 1.3 CU.M (1.69 CU.YD) CAPACITY
AN ATTACHMENT
BUCKET AS
7Y-7689 BUCKET AS
7Y7689 BUCKET AS (C-FAMILY)
AN ATTACHMENT
BUCKET AS
7Y-7698 BUCKET AS
7Y7698 BUCKET AS
AN ATTACHMENT
BUCKET AS
7Y-7733 BUCKET AS
7Y7733 BUCKET AS-(C-FAMILY)
EXTREME SERVICE EXCAVATION 1200 MM (47.2 IN) WIDE
TYPE 1
AN ATTACHMENT
BUCKET AS
7Y-7733 BUCKET AS
7Y7733 BUCKET AS-(C-FAMILY)
EXTREME SERVICE EXCAVATION 1200 MM (47.2 IN) WIDE
TYPE 2
AN ATTACHMENT
BUCKET AS-ROCK
7Y-7776 BUCKET AS-ROCK
7Y7776 BUCKET AS (B-FAMILY)
RIPPER
AN ATTACHMENT
BUCKET AS
7Y-7895 BUCKET AS
7Y7895 BUCKET AS-(B-FAMILY)
TRENCHING 1000 MM (39.4 IN) WIDE, 0.8 CU.M (1.04 CU. YD) CAPACITY
AN ATTACHMENT
BUCKET AS
7Y-7861 BUCKET AS
7Y7861 BUCKET AS-(C-FAMILY)
TYPE 2
AN ATTACHMENT
BUCKET AS
7Y-7861 BUCKET AS
7Y7861 BUCKET AS-(C-FAMILY)
TYPE 1
AN ATTACHMENT
BUCKET AS
7Y-9129 BUCKET AS
7Y9129 BUCKET AS
AN ATTACHMENT
BUCKET AS
7Y-9128 BUCKET AS
7Y9128 BUCKET AS-(B-FAMILY)
TRENCHING 900 MM (35.4 IN) WIDE, 0.7 CU.M (0.91 CU.YD) CAPACITY
AN ATTACHMENT
BUCKET AS
7Y-9130 BUCKET AS
7Y9130 BUCKET AS-(B-FAMILY)
EXCAVATION 1200 MM (47.2 IN) WIDE, 0.9 CU.M (1.17 CU.YD) CAPACITY
AN ATTACHMENT
BUCKET AS
7Y-9131 BUCKET AS
7Y9131 BUCKET AS-(B-FAMILY)
EXCAVATION 1305 MM (51.4 IN) WIDE, 1.0 CU.M (1.13 CU.YD) CAPACITY
AN ATTACHMENT
BUCKET AS
7Y-9134 BUCKET AS
7Y9134 BUCKET AS-(B-FAMILY)
EXCAVATION 1100 MM (43.3 IN) WIDE, 0.8 CU.M (1.04 CU.YD) CAPACITY
AN ATTACHMENT
BUCKET AS
7I-6692 BUCKET AS
7I6692 BUCKET AS-(B FAMILY)
1260 MM (49.6 IN) WIDE, 0.9 CU.M (1.18 CU.YD) CAPACITY
FOR USE WITH BOOM AR,STICK AR, LINKAGE GP-BUCKET
AN ATTACHMENT
BUCKET AS
7I-6693 BUCKET AS
7I6693 BUCKET AS (B FAMILY)
EXCAVATION. 1370 MM (53.9 IN) WIDE
FOR USE WITH BOOM AR, STICK, LINKAGE-BUCKET
AN ATTACHMENT
ADJUSTER GP-BUCKET
7Y-2219 ADJUSTER GP-BUCKET
7Y2219 ADJUSTER GP-BUCKET
AN ATTACHMENT
ADJUSTER GP-BUCKET
7Y-3475 ADJUSTER GP-BUCKET
7Y3475 ADJUSTER GP-(C-FAMILY)
AN ATTACHMENT
BUCKET GP-LIGHT MATERIAL
7Y-6402 BUCKET GP-LIGHT MATERIAL
7Y6402 BUCKET GP-LIGHT MATERIAL
0.45 CU.M (0.59 CU.YD) CAPACITY
FOR USE WITH LONG REACH-STICK
9J3169-PAGE 376.01
AN ATTACHMENT
BUCKET AS
7Y-6403 BUCKET AS
7Y6403 BUCKET AS-DITCH CLEANING
0.6 CU.M (0.78 CU.YD) CAPACITY
FOR USE WITH A LONG REACH STICK
AN ATTACHMENT
GROUND ENGAGING TOOLS (G.E.T.)
SIDECUTTER GP-BLADE
9W-8565 SIDECUTTER GP-BLADE
9W8565 SIDECUTTER GP-BLADE
S/N 3XK1-UP,4ZJ1-UP
FOR USE WITH HOE BUCKETS
AN ATTACHMENT
SIDECUTTER GP
7Y-0729 SIDECUTTER GP
7Y0729 SIDECUTTER GP
S/N 3XK1-UP,4ZJ1-UP
AN ATTACHMENT
SIDECUTTER GP-COMBINATION
9W-8566 SIDECUTTER GP-COMBINATION
9W8566 SIDECUTTER GP-COMBINATION
S/N 3XK1-UP,4ZJ1-UP
FOR USE WITH HOE BUCKETS
AN ATTACHMENT
TIP GP
3G-3236 TIP GP
3G3236 TIP GP-PENETRATION
S/N 3XK1-UP,4ZJ1-UP
FOR USE WITH HOE BUCKETS
AN ATTACHMENT
SIDECUTTER-STRIKE-OFF
9W-8567 SIDECUTTER-STRIKE-OFF
9W8567 SIDECUTTER GP-STRIKE OFF
S/N 3XK1-UP,4ZJ1-UP
FOR USE WITH HOE BUCKETS
AN ATTACHMENT
TIP GP-LONG
9N-4563 TIP GP-LONG
9N4563 TIP GP-LONG
HEAVY DUTY
S/N 3XK1-UP,4ZJ1-UP
AN ATTTACHMENT
TIP GP-LONG
8E-3751 TIP GP-LONG
8E3751 TIP GP-LONG
HEAVY DUTY
AN ATTACHMENT
TIP GP-PENETRATION
8E-0838 TIP GP-PENETRATION
8E0838 TIP GP-PENETRATION
S/N 3XK1-UP,4ZJ1-UP
AN ATTACHMENT
TIP GP
3G-3237 TIP GP
3G3237 TIP GP-PENETRATION
S/N 3XK1-UP,4ZJ1-UP
FOR USE WITH HOE BUCKETS
AN ATTACHMENT
TIP GP-LONG
8E-0834 TIP GP-LONG
8E0834 TIP GP-LONG
S/N 3XK1-UP,4ZJ1-UP
AN ATTACHMENT
TIP GP-PENETRATION
9N-4564 TIP GP-PENETRATION
9N4564 TIP GP-PENETRATION
S/N 3XK1-UP,4ZJ1-UP
AN ATTACHMENT
TIP GP-LONG
6Y-5472 TIP GP-LONG
6Y5472 TIP GP-LONG
HEAVY DUTY
S/N 3XK1-UP,4ZJ1-UP
AN ATTACHMENT
TIP GP-LONG
8E-3752 TIP GP-LONG
8E3752 TIP GP-LONG
HEAVY DUTY
S/N 3XK1-UP,4ZJ1-UP
AN ATTACHMENT
TIP GP-LONG
9J-3167 TIP GP-LONG
9J3167 TIP GP-LONG
S/N 3XK1-UP,4ZJ1-UP
FOR USE WITH HOE BUCKETS
AN ATTACHMENT
TIP GP-LONG
9J-3169 TIP GP-LONG
9J3169 TIP GP-LONG
PART OF 7Y6402 BUCKET
AN ATTACHMENT
TIP GP-LONG
9N-4562 TIP GP-LONG
9N4562 TIP GP-LONG
S/N 3XK1-UP,4ZJ1-UP
AN ATTACHMENT
TIP GP-LONG
8J-4955 TIP GP-LONG
8J4955 TIP GP-LONG
S/N 3XK1-UP,4ZJ1-UP
FOR USE WITH HOE BUCKETS
AN ATTACHMENT
8E-0835 TIP GP-SHORT
8E0835 TIP GP-SHORT
S/N 3XK1-UP,4ZJ1-UP
AN ATTACHMENT
TIP GP-SHORT
9N-4561 TIP GP-SHORT
9N4561 TIP GP-SHORT
S/N 3XK1-821,4ZJ1-459
AN ATTACHMENT
TIP GP-SHORT
8J-4954 TIP GP-SHORT
8J4954 TIP GP-SHORT
S/N 3XK1-UP,4ZJ1-UP
FOR USE WITH HOE BUCKETS
AN ATTACHMENT
TIP GP-SHORT
9J-3175 TIP GP-SHORT
9J3175 TIP GP-SHORT
S/N 3XK1-UP,4ZJ1-UP EXTREME SERVICE
FOR USE WITH HOE BUCKETS
AN ATTACHMENT
HAMMER GP
7Y-5872 INSTALLATION AR-HAMMER
7Y5872 INSTALLATION AR
2 SPEED
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Specifications
Bucket Cylinder
320, 320L, 320N AND 320S EXCAVATOR HYDRAULIC SYSTEM
Bucket Adjuster Group
320, 320L AND 320N EXCAVATOR ATTACHMENTS
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Service Magazine
New Long Reach Bucket Improves Bucket Durability{6526,6503}
1995/08/21
Install Bearings In Stick Correctly For Optimum Service Life {6502}
1995/10/09
The Special Instruction, REHS2834 , "Converting Straight Edge Buckets from the J-Series Base Edge Assemblies to the K-Series" Is Now Available. {6523, 6800, 6803, 6823}
2005/12/05
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Magazine
Inspection of the Hydraulic Pin Grabber Spring (Blocking Bar) {6129, 7000}
2006/03/06
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Special Instruction
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Specifications
Cutting Edge Group
320, 320L AND 320N EXCAVATOR ATTACHMENTS
Tip Adapter Group
320, 320L AND 320N EXCAVATOR ATTACHMENTS
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
Improvements To 300 Family of Excavators Increase Serviceability, Operator Comfort, Convenience{0374,0646,1263,1302,1401,1915,5460,5485,6120,7263,7301,7320}
1994/11/28
New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06
Filter Retainer Pilot Diameter Changed To Better Fit End Caps Of Hydraulic Filters {5068}
1996/10/14
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Correct Installation of Bucket Side Cutters {6813}
2004/08/02
Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2005/08/01
The Special Instruction, REHS2834 , "Converting Straight Edge Buckets from the J-Series Base Edge Assemblies to the K-Series" Is Now Available. {6523, 6800, 6803, 6823}
2005/12/05
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Letter-NACD
The Bond Between The Steel And The Rubber On The 3Q7749 Seal May Allow Gas To Leak
The Bond Between The Steel And The Rubber On The 3Q7749 Seal May Allow Gas To Leak
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New Buffer System Improves Service Life{6333}
1993/11/01
Improved Tie Rods And Nuts On Balderson Hydraulic Hammers Reduces Vibration{6333}
1993/11/29
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Service Magazine
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.