6I-3965 TURBOCHARGER GP S/N 7LG8623-16047 PART OF 6I-3192, 6I-4491, 6I-4492 TURBOCHARGER GP ALSO AN ATTACHMENT 3176



AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
FILTER GP-FUEL
FUEL SYSTEM GP
LINES GP-FUEL INJECTION

TRUCK ENGINE 3176 TRUCK ENGINE 7LG
 3176 Truck Engine 7LG07500-UP SEBP2035 3176 7LG   (1990)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
6I-2285 TURBOCHARGER GP
TURBOCHARGER GP
6I-3192 TURBOCHARGER GP
TURBOCHARGER GP
6I-3965 TURBOCHARGER GP
TURBOCHARGER GP
6I-4491 TURBOCHARGER GP
TURBOCHARGER GP
6I-4492 TURBOCHARGER GP
 

#SEBP20350310
 

6I-3965: TURBOCHARGER GP

6I-3965 TURBOCHARGER GP
S/N 7LG8623-16047
PART OF 6I-3192, 6I-4491, 6I-4492 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00398407 SEBP2035
6I3965 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3176 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 6I-3990 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 4P-2874 [1] HOUSING-COMPRESSOR  
3. 6I-3987 [1] HOUSING  
4. 7C-5802 [3] PLATE-CLAMP (COMPRESSOR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)  
6. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  8H-3710 [1] SCREW-TAPPING (6-32X0.375-IN)  
7. 7C-6671 M [6] BOLT AS  
8. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20350311
 

6I-4491: TURBOCHARGER GP

6I-4491 TURBOCHARGER GP
S/N 7LG9676-16047
44 DEGREE INBOARD
ALSO AN ATTACHMENT
i00399499 SEBP2035
6I4491 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3176 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 6I-3965 Y [1] TURBOCHARGER GP  
2. 9X-8494 M [2] BOLT-HIGH TEMPERATURE (M10X1.5X65-MM)  
  9X-6620 M [4] LOCKNUT (M10X1.5-THD)  
3. 1P-0451 [1] GASKET  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20350312
 

6I-4492: TURBOCHARGER GP

6I-4492 TURBOCHARGER GP
S/N 7LG8638-16047
FOR USE WITH 275 & 300 HP 9 DEGREES OUTBOARD
ALSO AN ATTACHMENT
i00399501 SEBP2035
6I4492 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3176 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 6I-3965 Y [1] TURBOCHARGER GP  
2. 9X-8494 M [2] BOLT-HIGH TEMPERATURE (M10X1.5X65-MM)  
  9X-6620 M [4] LOCKNUT (M10X1.5-THD)  
3. 1P-0451 [1] GASKET  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP20350313
 

4P-8772: FILTER GP-FUEL

4P-8772 FILTER GP-FUEL
S/N 7LG7512-UP
REMOTE MOUNTED
ALSO AN ATTACHMENT
i00371849 SEBP2035
4P8772 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3176 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 2R-6806 [2] CONNECTOR  
2. 3J-1907 [2] SEAL-O-RING  
3. 9N-5279 I [2] HOSE AS  
4. 7C-0318 [1] BASE AS-FUEL FILTER  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
5. 7C-2919 Y [1] PUMP GP-FUEL PRIMING  
6. 1R-0712 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
7. 6V-5048 C [1] SEAL-O-RING  
8. 9S-4182 C [1] PLUG (7/16-20-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP20350314
 

7C-1760: FILTER GP-FUEL

7C-1760 FILTER GP-FUEL
i00401867 SEBP2035
7C1760 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3176 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7C-0318 [1] BASE AS-FUEL FILTER  
2. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
3. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
4. 1R-0749 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
5. 6V-4248 M [2] BOLT (M10X1.5X25-MM)  
6. 9S-4182 B [1] PLUG (7/16-20-THD)  
7. 6V-5048 B [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP20350315
 

8H-7204: FILTER GP-FUEL

8H-7204 FILTER GP-FUEL
PRIMARY
AN ATTACHMENT
i00108873 SEBP2035
8H7204 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3176 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 1N-3583 C [1] BASE-FUEL FILTER  
2. 7N-1628 C [1] NUT (3/8-24-THD)  
3. 2J-0157 C [1] SEAL-O-RING  
4. 1L-3769 [1] RING-RETAINING  
5. 7H-9678 [1] RETAINER-ELEMENT  
6. 2H-3429 [1] RING-RETAINING  
7. 7S-9323 [1] SPRING  
8. 8H-7202 [1] CASE AS-FUEL FILTER  
9. 9M-2342 [1] FILTER ELEMENT-FUEL (PRIMARY)  
10. 8H-2778 [1] SEAL-RING (FUEL FILTER BASE)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP20350316
 

9Y-5653: FILTER GP-FUEL

9Y-5653 FILTER GP-FUEL
REMOTE MOUNTED
AN ATTACHMENT
i00444123 SEBP2035
9Y5653 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3176 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7C-2919 Y [1] PUMP GP-FUEL PRIMING  
2. 2R-6806 [2] CONNECTOR  
3. 3J-1907 [2] SEAL-O-RING  
4. 1R-0712 C [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
5. 6N-1046 I [2] HOSE AS  
6. 7C-0318 [1] BASE AS-FUEL FILTER  
7. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
8. 9S-4182 C [1] PLUG (7/16-20-THD)  
9. 6V-5048 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP20350317
 

459-3810: FILTER GP-WATER SEP & FUEL

459-3810 FILTER GP-WATER SEP & FUEL
FIELD REPLACEMENT FOR @@@@@8N-0940@@@@@
FIELD INSTALLATION
i06988131 SEBP2035
4593810 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 3176 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 175-7060 [1] BASE AS  
2. 438-5385 [1] FILTER AS-WATER SEP & FUEL (ADVANCED EFFICIENCY)  
 

#SEBP20350318
 

437-8114: KIT-FUEL SYSTEM GASKET

437-8114 KIT-FUEL SYSTEM GASKET
CLASSIC THIS KIT IS SERVICED ONLY AS A COMPLETE PACKAG
FIELD INSTALLATION
i06796241 SEBP2035
  For full view, you need register

Parts for your 3176 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
   
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP20350319
 

4P-9084: LINES GP-FUEL INJECTION

4P-9084 LINES GP-FUEL INJECTION
S/N 7LG7512-UP
i00372227 SEBP2035
4P9084 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3176 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 3J-1907 [11] SEAL-O-RING  
2. 9S-4191 [2] PLUG (9/16-18-THD)  
3. 9S-8004 [4] PLUG (9/16-18-THD)  
4. 4P-7864 [1] VALVE-REGULATOR  
5. 7E-3926 [1] SPRING  
6. 7X-0902 [1] CONNECTOR  
7. 5P-3456 [6] SEAL-O-RING  
8. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
9. 6V-5218 M [4] BOLT (M8X1.25X35-MM)  
10. 9Y-8258 [1] MANIFOLD-FUEL  
11. 9X-6650 [1] CONNECTOR-O-RING  
12. 3K-0360 [1] SEAL-O-RING  
13. 2R-6806 [2] CONNECTOR  
14. 8T-0100 M [2] BOLT (M8X1.25X60-MM)  
15. 9Y-8259 [1] ADAPTER-MANIFOLD  
16. 3P-0647 [2] SEAL-O-RING  
17. 4J-7533 [1] SEAL-O-RING  
18. 9S-8001 [1] PLUG  
19. 030-7942 [2] ELBOW  
20. 7E-2871 I [1] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Truck Engine News
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Component Changes For 1991 Model 3176 (7LG, 43Z) Engines{1052,1087,1119,1215,1290,1292,1304,1361,1362,1378,1408,1901,1902,1912}
1991/05/01
Improved Hose In Turbocharger Oil Lines Group Resists Deterioration Caused By Heat
1992/03/01
Service Tips For Effective Repair Of Failed Turbochargers
1993/04/01
Check Turbocharger Seals If There Is A Sudden Increase In Crankcase Blowby{1052,1317}
1996/12/23
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/01
Policy for the Reuse of the Turbocharger Turbine Housing {1065}
2012/10/26
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/10/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/01
Packaging the Turbocharger {1052}
2007/03/01
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacing a Model S2B With a Model S3B Turbocharger on Certain 3176 Truck Engines{1052}
Replacing a Model S2B With a Model S3B Turbocharger on Certain 3176 Truck Engines{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger
3176 DIESEL TRUCK ENGINE SPECIFICATIONS
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbocharger
3176 DIESEL TRUCK ENGINE DISASSEMBLY & ASSEMBLY
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Component Changes For 1991 Model 3176 (7LGH, 43Z) Engines{1052,1087,1119,1215,1290,1292,1304,1361,1362,1378,1408,1901,1902,1912}
1991/05/13
New Hose In Turbocharger Oil Lines Group Resists Deterioration Caused By Heat {1307}
1992/03/09
Service Tips For Effective Repair Of Failed Turbochargers{1052,1063,1059}
1993/05/10
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Procedure To Prevent Moisture From Collecting In The Hose Between The Air Inlet Manifold And Transducer Module (Boost Sensor) {1917}
1993/12/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3176 :

TURBOCHARGER GP
6I-3192 TURBOCHARGER GP
TURBOCHARGER GP
6I-2285 TURBOCHARGER GP
TURBOCHARGER GP
6I-2284 TURBOCHARGER GP
TURBOCHARGER GP
4P-2872 TURBOCHARGER GP
TURBOCHARGER GP
4P-2871 TURBOCHARGER GP
TURBOCHARGER GP
4P-2870 TURBOCHARGER GP
TURBOCHARGER GP
4P-1718 TURBOCHARGER GP
TURBOCHARGER GP
4P-1717 TURBOCHARGER GP
TURBOCHARGER GP
6I-4491 TURBOCHARGER GP
TURBOCHARGER GP
6I-4492 TURBOCHARGER GP
FILTER GP-FUEL
4P-8772 FILTER GP-FUEL
FILTER GP-FUEL
7C-1760 FILTER GP-FUEL
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
FILTER GP-FUEL
9Y-5653 FILTER GP-FUEL
FILTER GP-WATER SEP & FUEL
459-3810 FILTER GP-WATER SEP & FUEL
437-8114 KIT-FUEL SYSTEM GASKET

Truck sale: