9C9871 TANK GP-FUEL IT18F INTEGRATED TOOLCARRIER



FUEL SYSTEM
TANK GP-FUEL
LINES GP-FUEL
GOVERNOR GP

INTEGRATED TOOLCARRIER IT18F INTEGRATED TOOLCARRIER 6ZF
 IT18F INTEGRATED TOOLCARRIER 6ZF00001-UP (MACHINE) POWERED BY 3114 ENGINE SEBP2036 IT18F 6ZF   (1992)

FUEL SYSTEM

TANK GP-FUEL
TANK GP-FUEL
9C-9871 TANK GP-FUEL
 

#SEBP20360090
 

9C-9871: TANK GP-FUEL

9C9871 TANK GP-FUEL
c675762 SEBP2036
9C9871 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

Pos. Part No Qty Parts name Comments
1. 1H-8306 [1] SCREW  
2. 8V-6394 [1] STRAINER  
3. 8C-8457 [5] SCREW-MACHINE  
4. 9S-9334 [1] PLUG  
  7M-8485 [1] SEAL-O-RING (29.74MM ID)  
5. 9X-5627 [1] SENDER AS-FUEL LEVEL  
6. 9C-2292 [1] GASKET  
7. 8R-8882 [1] TANK AS-FUEL  
8. 8T-4192 M [4] BOLT (M12X1.75X25MM)  
  5P-1076 [4] WASHER-HARD  
9. 7T-2036 [1] CAP AS-FUEL TANK  
10. 4B-1663 [1] ELEMENT-FILTER  
11. 4B-5949 [1] ELEMENT-FILTER  
12. 4B-5423 [1] GASKET-BAFFLE  
13. 3F-4134 [1] BAFFLE-CAP  
14. 7B-2002 [1] WASHER  
15. 7T-2009 [1] VALVE AS  
16. 7T-2037 [1] GASKET  
17. 8P-0408 [1] CAP-FUEL TANK FILLER  
18. 8T-0328 [5] WASHER-HARD  
  M   METRIC PART
 

#SEBP20360091
 

4E-9756: LINES GP-FUEL

4E9756 LINES GP-FUEL
TYPE 1
c530353 SEBP2036
4E9756 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

Pos. Part No Qty Parts name Comments
1. 6V-8724 [1] ELBOW (90 DEGREE-9/16-18THD)  
2. 3J-1907 [2] SEAL (11.89MM ID)  
3. 6K-8178 [1] CLIP  
4. 6V-8397 [3] SEAL-O-RING (9.25MM ID)  
5. 9C-5271 [1] HOSE AS  
6. 8R-4301 [1] HOSE AS  
7. 6V-8398 [1] SEAL-0-RING (13.31MM ID)  
8. 6V-8723 [1] ELBOW  
9. 3K-0360 [2] SEAL-O-RING (16.36MM ID)  
10. 6V-8636 [1] CONNECTOR  
11. 6V-8639 [1] CONNECTOR  
 

#SEBP20360092
 

4E-9756: LINES GP-FUEL

4E9756 LINES GP-FUEL
TYPE 2
c702117 SEBP2036
4E9756 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

Pos. Part No Qty Parts name Comments
1. 6V-8724 [1] ELBOW-90 DEGREE (90 DEGREE-9/16-18THD)  
2. 3J-1907 [2] SEAL-O-RING (11.89MM ID)  
3. 6K-8178 [1] CLIP (15.88MM ID)  
4. 6V-8397 [3] SEAL-O-RING (9.25MM ID)  
5. 9C-5271 I [1] HOSE AS  
6. 8R-4301 I [1] HOSE AS  
7. 6V-8398 [1] SEAL-O-RING (13.31MM ID)  
8. 7X-0901 C [1] ELBOW  
9. 1J-9671 C [2] SEAL-O-RING (10.52MM ID)  
10. 6V-8636 [1] CONNECTOR  
11. 6V-8639 [1] CONNECTOR-SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP20360093
 

7W-8434: LINES GP-GOVERNOR OIL

7W8434 LINES GP-GOVERNOR OIL
PART OF 7E5867 GOVERNOR-UNIT INJECTOR
c494156 SEBP2036
7W8434 LINES GP-GOVERNOR OIL Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

Pos. Part No Qty Parts name Comments
1. 6V-8628 [1] ELBOW  
2. 3J-7354 [2] SEAL-O-RING (8.92MM ID)  
3. 6V-8647 [1] CONNECTOR-SEAL  
4. 7W-0367 [1] TUBE AS  
5. 4J-5477 [2] SEAL-O-RING (8.61MM ID)  
 

#SEBP20360094
 

7E-5867: GOVERNOR GP-UNIT INJECTOR

7E5867 GOVERNOR GP-UNIT INJECTOR
SEBP20360094 SEBP2036
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

Pos. Part No Qty Parts name Comments
   
   
  7W-4812 Y [1] FASTENER GP-GOVERNOR  
   
  4P-5513 Y [1] GOVERNOR GP-UNIT INJECTOR  
   
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20360095
 

4P-5513: GOVERNOR GP-UNIT INJECTOR

4P5513 GOVERNOR GP-UNIT INJECTOR
TYPE 2
6I4267-PAGE 63.01
PART OF 7E5867 GOVERNOR-UNIT INJECTION
c563527 SEBP2036
4P5513 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

Pos. Part No Qty Parts name Comments
1. 6I-4267 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 6I-2018 [1] CAM-TORQUE  
3. 7E-3819 [1] SPRING GP  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 4P-5746 [1] CONTROL AS-RATIO  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20360096
 

4P-5513: GOVERNOR GP-UNIT INJECTOR

4P5513 GOVERNOR GP-UNIT INJECTOR
TYPE 1
4P5502-PAGE 62
PART OF 7E5867 GOVERNOR-UNIT INJECTOR
c532306 SEBP2036
4P5513 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

Pos. Part No Qty Parts name Comments
1. Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1574 [1] CAM-TORQUE  
3. 7E-3819 [1] SPRING GP  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 4P-5746 [1] CONTROL AS-RATIO  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20360097
 

4P-5513: GOVERNOR GP-UNIT INJECTOR

4P5513 GOVERNOR GP-UNIT INJECTOR
TYPE 3
1307323-PAGE 61.03
PART OF 7E5867 GOVERNOR-UNIT INJECTION
c682186 SEBP2036
4P5513 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

Pos. Part No Qty Parts name Comments
1. 130-7323 Y [1] GOVERNOR GP  
2. 6I-2018 [1] CAM-TORQUE  
3. 7E-3819 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 4P-5746 [1] CONTROL AS-RATIO  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20360098
 

130-7323: GOVERNOR GP-UNIT INJECTOR

1307323 GOVERNOR GP
7E8794-PAGE 64
PART OF 4P5513 GOVERNOR-UNIT INJECTION
c703127 SEBP2036
1307323 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING (18.77MM ID)  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 5M-2057 [1] SEAL-O-RING (34.59MM ID)  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. 4P-3537 [1] RING-TOLERANCE  
33. 4P-3539 [1] LEVER-THROTTLE  
34. 8T-8895 M [2] SETSCREW-SOCKET  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD  
38. 7W-4313 [1] WASHER  
39. 130-7322 [1] HOUSING AS  
40. 2S-4078 [1] SEAL-O-RING (37.46MM ID)  
41. 5C-8312 M [1] NUT (M4X0.7 THD)  
42. 8T-6702 M [1] SETSCREW-SOCKET  
43. 6V-8189 [1] NUT (5/16-18 THD)  
44. 128-4794 [1] PLUG-TAMPER  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD  
48. 6V-5683 M [1] BOLT (M6X1X16MM)  
49. 8T-5435 M [1] BOLT  
50. 1N-3887 [1] SETSCREW-SOCKET  
51. 7C-4483 [1] SCREEN AS  
52. 6V-5100 [1] SEAL-O-RING (53.64MM ID)  
53. 4P-4231 [1] COVER-REAR  
54. 5C-2874 M [2] NUT (M5X0.8 THD)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M16X1X20MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (1.6MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD  
65. 7C-5541 [2] TOE-FLYWEIGHT  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (.12 MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (.25 MM THK)  
80. 7C-5885 [1] WASHER  
81. 4P-4000 [1] SPRING-LEVER  
82. 109-4587 [1] RING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP20360099
 

4P-5502: GOVERNOR GP-UNIT INJECTOR

4P5502 GOVERNOR GP-UNIT INJECTOR
REPLACED BY 6I4267-PAGE 63.01
7E8794-PAGE 65
PART OF 4P5513 GOVERNOR-UNIT INJECTOR
c575455 SEBP2036
4P5502 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your IT18F INTEGRATED TOOLCARRIER:

Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 7C-8974 [1] CLEVIS AS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 7E-5785 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 7E-3215 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 7C-6592 [1] ARBOR AS-TORQUE CAM  
24. 8C-6775 M [1] SETSCREW-SOCKET  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 8T-8895 M [1] SETSCREW-SOCKET  
35. 4W-6630 [1] LEVER  
36. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD  
38. 7W-4313 [1] WASHER  
39. 4P-5157 [1] HOUSING AS-GOVERNOR  
40. Z [1] SHAFT  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET  
43. 5C-2874 M [3] NUT  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD  
48. 6V-5683 M [1] BOLT  
49. 8T-5435 M [1] BOLT  
50. 9X-6002 M [1] SETSCREW  
51. 7C-4483 [1] SCREEN AS  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 4P-3539 [1] LEVER-THROTTLE  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD  
64. 8C-8545 M [4] BOLT-SOCKET HEAD  
65. 7C-5541 [2] TOE-FLYWEIGHT  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM  
80. 7C-5885 [1] WASHER  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT  
83. 5M-2057 [1] SEAL-O-RING  
84. 4P-3537 [1] RING-TOLERANCE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

Information:

Tool Operating Manual
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Updated Fuel Tank Caps Are Now Available {1273}
2004/03/15
Updated Fuel Tank Caps are Now Available {1273}
2013/03/22
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19

Caterpillar Parts SIS Catalog IT18F :

LINES GP-AIR
7C-6230 LINES GP-AIR
HEATER GP-AIR INLET
8Y-8993 HEATER GP-AIR INLET
LINES GP-FUEL RATIO CONTROL
4P-9693 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL RATIO CONTROL
9Y-3943 LINES GP-FUEL RATIO CONTROL
LINES GP-AIR
4W-6609 LINES GP-AIR
TURBOCHARGER GP
6I-0193 TURBOCHARGER GP
TURBOCHARGER GP
6I-0194 TURBOCHARGER GP
TURBOCHARGER GP
6I-0193 TURBOCHARGER GP
LINES GP-FUEL
4E-9756 LINES GP-FUEL
LINES GP-FUEL
4E-9756 LINES GP-FUEL
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
7E-5867 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5513 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5513 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5513 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
130-7323 GOVERNOR GP-UNIT INJECTOR

Truck sale:

Caterpillar IT18F, Construction
35,100 
Caterpillar IT18F, Construction
- Wheel Loaders
ZIEGLER CAT
CATERPILLAR IT18F 1994
 
CATERPILLAR IT18F 1994
- MINING WHEEL LOADER
ZIEGLER INC
United States
CAT IT18F
Call 
CAT IT18F

Pro Team Auction
Arkansas
1994 CAT IT18F
USD $29,500 
1994 CAT IT18F

Randall Brothers
Ohio
 
 
CAT IT18F

McGrew Equipment Company
Seven Valleys, Pennsylvania