AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9C3827 CYLINDER & SEAL GP-TILT S/N 3TJ1-399 6E4651-PAGE 229 918F WHEEL LOADER


HYDRAULIC SYSTEM
CYLINDER GP
PUMP GP
OPERATOR STATION
CONTROL GP-STEERING
STEERING SYSTEM
LINES GP
CYLINDER GP

WHEEL LOADER 918F WHEEL LOADER 3TJ
 918F WHEEL LOADER 3TJ00001-UP (MACHINE) POWERED BY 3114 ENGINE SEBP2037 918F 3TJ   (1992)

HYDRAULIC SYSTEM

CYLINDER GP
GUARD GP-TILT CYLINDER
109-1702 GUARD GP-TILT CYLINDER
CYLINDER & SEAL GP
9C-3826 CYLINDER & SEAL GP
CYLINDER & SEAL GP
9C-3827 CYLINDER & SEAL GP
CYLINDER & SEAL GP
9C-3827 CYLINDER & SEAL GP
CYLINDER GP-LIFT
9T-3937 CYLINDER GP-LIFT
CYLINDER GP-TILT
6E-4651 CYLINDER GP-TILT
CYLINDER GP-TILT
110-7845 CYLINDER GP-TILT
 

#SEBP20370350
 

9C-3827: CYLINDER & SEAL GP

9C3827 CYLINDER & SEAL GP-TILT
S/N 3TJ1-399
6E4651-PAGE 229
c530425 SEBP2037
9C3827 CYLINDER & SEAL GP Parts scheme
  For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-4651 Y [1] CYLINDER GP-TILT  
2. 7K-9204 [4] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP20370351
 

9T-3937: CYLINDER GP-LIFT

9T3937 CYLINDER GP-LIFT (CHGS 05, 06)
102 MM (4 IN) BORE X 692 MM (27 IN) STROKE
PART OF 9C3826 CYLINDER & SEAL
c592914 SEBP2037
9T3937 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-3938 [1] CYLINDER AS  
  9V-4975 [1] BEARING-SLEEVE  
2. 8C-3411 M [1] BOLT (M30X3.5X90MM)  
3. 3S-7023 [1] WASHER  
4. 8C-9160 [1] SEAL AS  
5. 6J-2797 [1] RING-WEAR  
6. 8T-4958 [1] RING-WEAR  
7. 8C-9125 [1] SEAL AS  
8. 5J-8225 [1] SEAL-U-CUP  
9. 6E-4977 [1] HEAD  
10. 9T-1809 [1] ROD AS  
11. 8C-9134 [1] SEAL-LIP  
12. 9X-4611 [1] SEAL-O-RING  
13. 2K-6830 [1] RING-BACKUP  
14. 9T-5927 [1] PISTON  
15. 2R-1236 [1] RING-RETAINING  
  M   METRIC PART
 

#SEBP20370352
 

6E-4651: CYLINDER GP-TILT

6E4651 CYLINDER GP-TILT (CHGS 00, 01)
114 MM (5 IN) BORE X 496 MM (20 IN) STROKE
S/N 3TJ1-399
PART OF 9C3827 CYLINDER & SEAL
c658074 SEBP2037
6E4651 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-4652 [1] CYLINDER AS  
  6E-0411 [1] BEARING-SLEEVE  
2. 8T-1605 M [1] BOLT (M36X4X100MM)  
3. 3S-6162 [1] WASHER-HARD (6MM THK)  
4. 9X-7269 [1] SEAL AS  
5. 4J-3745 [1] RING-WEAR  
6. 6E-1404 [1] PISTON  
7. 3E-6703 [1] SEAL-O-RING (110.72MM ID)  
8. 1K-7095 [1] RING-BACKUP  
9. 122-9842 [1] HEAD  
10. 9T-4067 [1] ROD AS  
  9T-5599 [1] BEARING-SLEEVE  
11. 8C-3840 [1] SEAL-LIP  
12. 5J-0964 [1] SEAL-U-CUP  
13. 8C-3839 [1] SEAL AS  
14. 8T-0785 [1] RING-WEAR  
15. 1K-6985 [1] RING-RETAINING  
  M   METRIC PART
 

#SEBP20370353
 

110-7845: CYLINDER GP-TILT

1107845 CYLINDER GP-TILT (CHGS 00, 01)
114 MM (5 IN) BORE X 496 MM (20 IN) STROKE
S/N 3TJ400-UP
PART OF 9C3827 CYLINDER & SEAL
c640553 SEBP2037
1107845 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-7846 [1] CYLINDER AS  
  6E-0411 [1] BEARING-SLEEVE  
  110-7848 [2] LUG  
  110-7849 [2] LUG  
2. 8T-1605 M [1] BOLT (M36X4X100MM)  
3. 106-1017 [1] WASHER (6MM THK)  
4. 9X-7269 [1] SEAL AS  
5. 4J-3745 [1] RING-WEAR  
6. 109-7015 [1] PISTON  
7. 3E-6703 [1] SEAL-O-RING  
8. 1K-7095 [1] RING-BACKUP  
9. 122-9842 [1] HEAD  
10. 9T-4067 [1] ROD AS  
  9T-5599 [1] BEARING-SLEEVE  
11. 8C-3840 [1] SEAL-LIP  
12. 5J-0964 [1] SEAL-U-CUP  
13. 8C-3839 [1] SEAL AS  
14. 8T-0785 [1] RING-WEAR  
15. 1K-6985 [1] RING-RETAINING  
  M   METRIC PART
 

#SEBP20370354
 

9T-2031: ROTATING GP-PUMP

9T2031 ROTATING GP
PART OF 6E6472 PUMP-PISTON
c538086 SEBP2037
9T2031 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-3868 [1] KIT-PISTON  
2. 9T-3860 [1] PLATE  
3. 9T-3859 [1] WASHER-SPHERICAL  
4. 9T-3862 [1] RETAINER  
5. 9T-3857 [3] PIN  
6. 9T-3863 [1] BARREL  
7. 9T-3861 [1] WASHER  
8. 9T-3858 [1] SPRING  
9. 9T-3864 [1] WASHER  
10. 004-1683 [1] RING-SNAP  
 

#SEBP20370355
 

9C-8235: CONTROL GP-STEERING

9C8235 CONTROL GP-STEERING
S/N 3TJ1-84
8Y7680-PAGE 237
c537326 SEBP2037
9C8235 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-2918 [1] KNOB AS  
2. 8Y-7687 [1] SWITCH AS  
3. 8R-2917 [1] WHEEL-STEERING  
4. 8Y-7680 Y [1] STEERING COLUMN GP  
5. 4E-0156 [1] BOOT  
6. 9X-6772 [4] STRAP-CABLE  
7. 4E-0716 [1] PLATE AS  
8. 8T-4136 M [9] BOLT (M10X1.50X25MM)  
  8T-4121 [9] WASHER (21MM OD)  
9. 8T-8906 [2] BOLT  
10. 5C-9553 M [2] BOLT (M6X1.0X16MM)  
11. 4E-0154 [1] BRACKET  
12. 9U-0409 [1] SUPPORT AS  
  6V-9632 M [3] NUT (M6X1-6H THD)  
  8T-3490 M [9] NUT-WELD (M10X1.5-6H THD)  
  8T-3612 M [6] NUT-WELD (M8X1.25-6H THD)  
  8T-6462 M [2] BOSS-WELD  
  7T-1099 [2] LINK  
13. 6N-6984 [3] GROMMET AS  
14. 8T-4222 [3] WASHER-PLATED  
15. 8T-4133 M [3] NUT (M10X1.50 THD)  
16. 7X-3183 [2] BOLT  
17. 8T-4896 [4] WASHER-HARD (18.5MM)OD  
18. 4E-0160 [1] GASKET  
19. 9X-2043 M [5] SCREW-TRUSS HEAD  
20. 6V-4369 [1] CLIP  
21. 7X-4797 [1] SEAL-STEERING SHAFT  
22. 4E-0158 [1] PLATE-RH  
23. 4E-0155 [1] PLATE-LH  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20370356
 

9C-8235: CONTROL GP-STEERING

9C8235 CONTROL GP-STEERING
S/N 3TJ85-UP
8Y7680-PAGE 237
c563399 SEBP2037
9C8235 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-2918 [1] KNOB AS  
2. 2T-3360 C [1] BUTTON AS-HORN  
3. 8R-2917 [1] WHEEL-STEERING  
4. 8Y-7680 Y [1] STEERING COLUMN GP  
5. 4E-0156 [1] BOOT  
6. 7K-1181 C [4] STRAP-CABLE (4.00) DIA.  
7. 4E-0716 [1] PLATE AS  
8. 8T-4136 M [9] BOLT (M10X1.50X25MM)  
  8T-4121 [9] WASHER (21MM OD)  
9. 8T-8906 [2] BOLT  
10. 5C-9553 M [2] BOLT (M6X1.0X16MM)  
11. 106-7123 [1] BRACKET  
12. 9U-0409 C [1] SUPPORT AS  
  6V-9632 M [2] NUT (M6X1-6H THD)  
  8T-3490 M [9] NUT-WELD (M10X1.5-6H THD)  
  8T-3612 M [6] NUT-WELD (M8X1.25-6H THD)  
  8T-6462 M [2] BOSS-WELD  
  7T-1099 [3] LINK  
  5D-9629 [1] ROD  
13. 2W-9710 C [3] MOUNT AS  
14. 8T-4222 [3] WASHER-PLATED  
15. 8T-4133 M [3] NUT (M10X1.50 THD)  
16. 7X-3183 [2] BOLT  
17. 8T-4896 [4] WASHER-HARD (18.5MM)OD  
18. 4E-0160 [1] GASKET  
19. 9X-2043 CM [4] SCREW-TRUSS HEAD  
20. 105-8896 [2] PLATE  
21. 7X-4797 [1] SEAL-STEERING SHAFT  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20370357
 

9C-4970: LINES GP-STEERING

9C4970 LINES GP-STEERING OIL
9T5530-PAGE 242
c565704 SEBP2037
9C4970 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5777 [1] ADAPTER-O-RING  
  7M-8485 [1] SEAL-O-RING (29.74MM) ID  
2. 9T-5530 Y [1] PUMP GP-METERING  
3. 8T-1686 [1] ELBOW  
4. 3K-0360 [9] SEAL-O-RING (16.36MM ID)  
5. 9C-9719 I [1] HOSE AS  
6. 6V-8398 [10] SEAL-0-RING (13.31MM ID)  
7. 9R-4688 I [1] HOSE AS  
8. 4J-5477 [2] SEAL-O-RING (8.61MM ID)  
9. 8T-6466 M [4] BOLT (M10X1.50X60MM)  
10. 8T-4121 [11] WASHER (21MM OD)  
11. 4E-0435 [1] STRIP AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-6H THD)  
12. 4E-0086 I [1] HOSE AS  
  6V-9746 [1] SEAL-O-RING (19.79MM ID)  
13. 3J-1907 [1] SEAL-O-RING  
14. 8T-1718 [1] ELBOW-90 DEGREE  
15. 6V-8639 [2] CONNECTOR-SEAL  
16. 8T-4136 M [7] BOLT (M10X1.50X25MM)  
17. 3S-8665 [1] CLIP (TAB)  
18. 9M-8406 [1] CLIP (15.8MM ID)  
19. 6V-1249 [2] GROMMET  
20. 9T-8844 [1] VALVE-CHECK  
21. 6V-8628 [1] ELBOW  
22. 5P-7464 [2] CLIP  
23. 6V-8625 [2] ELBOW-FACE SEAL (90 DEGREE-3/4-16THD)  
24. 3G-8057 [1] CLIP (SLOT)  
25. 3G-8047 [1] GROMMET  
26. 3G-8054 [1] CLIP (TAB)  
27. 5P-7465 [2] CLIP  
28. 9X-2041 M [4] SCREW-TRUSS HEAD  
29. 4E-7100 I [2] HOSE AS  
30. 6V-3965 [1] NIPPLE AS  
  6V-0852 [1] CAP-DUST  
31. 9C-9721 I [2] HOSE AS  
32. 3J-7354 [2] SEAL-O-RING (8.92MM ID)  
33. 6V-8647 [1] CONNECTOR-SEAL  
34. 1P-4577 [2] FLANGE-HALF  
35. 7D-4027 [1] ADAPTER  
  4J-0520 [2] SEAL  
36. 6V-8775 [2] TEE-FACE SEAL  
37. 7J-9108 [1] SEAL-O-RING (15.60MM ID)  
38. 6V-9002 [1] ELBOW (45 DEG-3/4-16THD)  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20370358
 

9C-3790: CYLINDER & MTG GP-STEERING

9C3790 CYLINDER & MOUNTING GP
9T5725-PAGE 235, 9T2637-PAGE 236
c555175 SEBP2037
9C3790 CYLINDER & MTG GP-STEERING Parts scheme
  For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-6552 [4] ELBOW  
2. 9T-2637 Y [2] CYLINDER GP-STEERING-RH  
3. 4E-4524 [4] PIN AS  
4. 8T-4192 M [4] BOLT (M12X1.75X25MM)  
5. 7X-0618 [4] WASHER-HARD  
6. 9D-1535 B [4] WASHER-THRUST  
7. 2V-0486 [2] HOSE AS  
8. 3B-8489 [4] FITTING-GREASE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP20370359
 

9T-5725: CYLINDER GP-STEERING-LH

9T5725 CYLINDER GP-STEERING-LH (CHG 04)
70 MM (3 IN) BORE X 726 MM (29 IN) STROKE
PART OF 9C3790 CYLINDER & MOUNTING
c530619 SEBP2037
9T5725 CYLINDER GP-STEERING-LH Parts scheme
  For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] CYLINDER AS-LH  
2. 4D-4431 [1] BEARING-ALIGNING  
3. 6V-5845 M [1] BOLT  
  8T-3282 [1] WASHER-HARD  
4. 5J-7010 [1] SEAL AS  
5. 8J-0112 [1] RING-WEAR  
6. 4T-6780 [1] RING-WEAR  
7. 8C-9122 [1] SEAL AS  
8. 5J-8150 [1] SEAL-U-CUP  
9. 6E-4940 [1] HEAD  
10. 9T-2642 [1] ROD AS  
11. 4D-4431 [1] BEARING-ALIGNING  
12. 8C-9131 [1] SEAL-LIP TYPE  
13. 5H-8848 [1] SEAL-O-RING  
14. 4J-9225 [1] RING-BACK-UP  
15. 9T-2457 [1] PISTON  
  M   METRIC PART
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 918F :

CYLINDER & SEAL GP
9C-3827 CYLINDER & SEAL GP
VALVE GP-SOLENOID
9X-3267 VALVE GP-SOLENOID
CYLINDER & SEAL GP
9C-3826 CYLINDER & SEAL GP
ACCUMULATOR & MOUNTING GP
9U-0966 ACCUMULATOR & MOUNTING GP
LINES GP-LIFT CYLINDER
4E-9985 LINES GP-LIFT CYLINDER
LINES GP-LIFT CYLINDER
4E-9985 LINES GP-LIFT CYLINDER
LINES GP-TILT CYLINDER
4E-9984 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
4E-9984 LINES GP-TILT CYLINDER
CYLINDER GP-LIFT
9T-3937 CYLINDER GP-LIFT
CYLINDER GP-TILT
6E-4651 CYLINDER GP-TILT
CYLINDER GP-TILT
110-7845 CYLINDER GP-TILT
ROTATING GP-PUMP
9T-2031 ROTATING GP-PUMP
CONTROL GP-STEERING
9C-8235 CONTROL GP-STEERING
CONTROL GP-STEERING
9C-8235 CONTROL GP-STEERING
LINES GP-STEERING
9C-4970 LINES GP-STEERING
CYLINDER & MTG GP-STEERING
9C-3790 CYLINDER & MTG GP-STEERING

Truck sale:

Caterpillar 918F, Construction
22,507 USD 
Caterpillar 918F, Construction
- Wheel Loaders
MICHIGAN CAT
Caterpillar 918F, Construction
21,079 
Caterpillar 918F, Construction
- Wheel Loaders
TOROMONT CAT
Canada
1993 CAT 918F
USD $25,000 
1993 CAT 918F

Tractor Ranch Inc.
Wills Point, Texas
1994 CAT 918F
Call 
1994 CAT 918F

Zadoon Equipment
Wisconsin
CATERPILLAR 918F 1994
$22,000 USD 
CATERPILLAR 918F 1994
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
BUTLER MACHINERY CO
3401 33rd St SW - Fargo - North Dakota
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.