BASIC ENGINE
CRANKSHAFT GPBASIC ENGINE
CRANKSHAFT GP
#SEBP20420120
132-3875: CRANKSHAFT GP
132-3875 CRANKSHAFT GP
Type 1
Type 1
For full view, you need register
Parts for your 3054 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8736 | [1] | KEY-WOODRUFF | |
| 2. | 4P-9948 | [1] | CRANKSHAFT GP | |
| 3. | 353-2205 B | [1] | KIT-ROD BEARING | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | [2] | WASHER-THRUST (0.18-MM OS) | ||
| 5. | 353-7427 B | [1] | KIT-BEARING | |
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | KIT-BEARING (0.75-MM US) | |||
| 6. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | [2] | WASHER-THRUST (0.18-MM OS) | ||
| 7. | 6I-0223 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP20420121
132-3875: CRANKSHAFT GP
132-3875 CRANKSHAFT GP
Type 2
Type 2
For full view, you need register
Parts for your 3054 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 067-6135 | [1] | KEY-WOODRUFF | |
| 2. | 364-2828 | [1] | CRANKSHAFT GP | |
| 7C-3195 | [1] | BLOCK-THRUST | ||
| 7C-3196 | [1] | BOLT | ||
| 3. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS) | |||
| 5. | 353-7427 B | [1] | KIT-BEARING (STANDARD) | |
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | KIT-BEARING (0.75-MM US) | |||
| 6. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS) | |||
| 7. | 6I-0223 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP20420122
142-7261: CRANKSHAFT GP
142-7261 CRANKSHAFT GP
For full view, you need register
Parts for your 3054 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 067-6135 | [1] | KEY-WOODRUFF (CRANKSHAFT) | |
| 2. | 4P-9948 | [1] | CRANKSHAFT GP | |
| 3. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | [2] | WASHER-THRUST (0.18-MM OS)(UPPER) | ||
| 5. | 353-7427 B | [1] | KIT-BEARING (STANDARD) | |
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | KIT-BEARING (0.75-MM US) | |||
| 6. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | [2] | WASHER-THRUST (0.18-MM OS)(LOWER) | ||
| 7. | 142-7332 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP20420123
142-8408: CRANKSHAFT GP
142-8408 CRANKSHAFT GP
Type 1
Type 1
For full view, you need register
Parts for your 3054 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8736 | [1] | KEY-WOODRUFF | |
| 2. | 4P-9948 | [1] | CRANKSHAFT GP | |
| 3. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | [2] | WASHER-THRUST (0.18-MM OS)(.007 IN) | ||
| 5. | 353-7427 B | [1] | KIT-BEARING (STANDARD) | |
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | KIT-BEARING (0.75-MM US) | |||
| 6. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | [2] | WASHER-THRUST (0.18-MM OS)(.007 IN) | ||
| LOWER | ||||
| 7. | 142-7332 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP20420124
142-8408: CRANKSHAFT GP
142-8408 CRANKSHAFT GP
Type 2
Type 2
For full view, you need register
Parts for your 3054 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8736 | [1] | KEY-WOODRUFF | |
| 2. | 221-8057 C | [1] | CRANKSHAFT GP | |
| 3. | 353-2205 B | [1] | KIT-ROD BEARING | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | [2] | WASHER-THRUST (0.18-MM OS)(.007 IN) | ||
| 5. | 353-7427 B | [1] | KIT-BEARING | |
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | KIT-BEARING (0.75-MM US) | |||
| 6. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | [2] | WASHER-THRUST (0.18-MM OS)((LOWER) | ||
| 7. | 7C-3195 C | [1] | BLOCK-THRUST | |
| 8. | 7C-3196 C | [3] | BOLT | |
| 9. | 142-7332 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP20420125
142-8408: CRANKSHAFT GP
142-8408 CRANKSHAFT GP
Type 3
Type 3
For full view, you need register
Parts for your 3054 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP20420126
146-0728: CRANKSHAFT GP
146-0728 CRANKSHAFT GP
Type 1
Type 1
For full view, you need register
Parts for your 3054 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8736 | [1] | KEY-WOODRUFF | |
| 2. | 4P-9948 | [1] | CRANKSHAFT GP | |
| 3. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 353-7427 B | [1] | KIT-BEARING (STANDARD) | |
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | KIT-BEARING (0.75-MM US) | |||
| 5. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | [2] | WASHER-THRUST (0.18-MM OS)(TOP) | ||
| 6. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | [2] | WASHER-THRUST (0.18-MM OS)(BOTTOM) | ||
| 7. | 6I-0223 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP20420127
146-0728: CRANKSHAFT GP
146-0728 CRANKSHAFT GP
Type 2
Type 2
For full view, you need register
Parts for your 3054 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 067-6135 | [1] | KEY-WOODRUFF | |
| 2. | 364-2828 | [1] | CRANKSHAFT GP | |
| 7C-3195 | [1] | BLOCK-THRUST | ||
| 7C-3196 | [1] | BOLT | ||
| 3. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS) | |||
| 5. | 353-7427 B | [1] | KIT-BEARING (STANDARD) | |
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | KIT-BEARING (0.75-MM US) | |||
| 6. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS) | |||
| 7. | 6I-0223 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP20420128
194-3465: CRANKSHAFT GP
194-3465 CRANKSHAFT GP
Type 1
Type 1
For full view, you need register
Parts for your 3054 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8736 | [1] | KEY-WOODRUFF | |
| 2. | 4P-9948 | [1] | CRANKSHAFT GP | |
| 3. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER)(UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS) | |||
| 5. | 353-7427 B | [1] | KIT-BEARING (STANDARD) | |
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | KIT-BEARING (0.75-MM US) | |||
| 6. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER)(LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS) | |||
| 7. | 6I-0223 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP20420129
194-3465: CRANKSHAFT GP
194-3465 CRANKSHAFT GP
Type 2
Type 2
For full view, you need register
Parts for your 3054 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8736 | [1] | KEY-WOODRUFF | |
| 2. | 6I-0223 | [1] | GEAR-CRANKSHAFT (28-TEETH) | |
| 3. | 139-7018 | [1] | CRANKSHAFT GP | |
| 4. | 353-7427 B | [1] | KIT-BEARING (STANDARD) | |
| 353-7428 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7429 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7430 AB | KIT-BEARING (0.75-MM US) | |||
| 5. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 035-2207 AB | HINGE-MAST MOUNTING | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 6. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS) | |||
| 7. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS) | |||
| 8. | 7C-3196 | [3] | BOLT | |
| 9. | 7C-3195 | [1] | BLOCK-THRUST | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Information:
BASIC ENGINE
CRANKSHAFT GP
Engine News
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Disassembly and Assembly
Service Magazine
